All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-phy@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>,
	linux-kernel@vger.kernel.org, Michal Simek <michal.simek@amd.com>,
	linux-arm-kernel@lists.infradead.org,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH 3/3] phy: zynqmp: Add debugfs support
Date: Mon, 22 Apr 2024 14:58:03 -0400	[thread overview]
Message-ID: <20240422185803.3575319-4-sean.anderson@linux.dev> (raw)
In-Reply-To: <20240422185803.3575319-1-sean.anderson@linux.dev>

Add support for printing some basic status information to debugfs. This
is helpful when debugging phy consumers to make sure they are configuring
the phy appropriately.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/phy/xilinx/phy-zynqmp.c | 54 +++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 08c88dcd7799..e2e86943e9f3 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -122,6 +123,15 @@
 #define ICM_PROTOCOL_DP			0x4
 #define ICM_PROTOCOL_SGMII		0x5
 
+static const char *const xpsgtr_icm_str[] = {
+	[ICM_PROTOCOL_PD] = "powered down",
+	[ICM_PROTOCOL_PCIE] = "PCIe",
+	[ICM_PROTOCOL_SATA] = "SATA",
+	[ICM_PROTOCOL_USB] = "USB",
+	[ICM_PROTOCOL_DP] = "DisplayPort",
+	[ICM_PROTOCOL_SGMII] = "SGMII",
+};
+
 /* Test Mode common reset control  parameters */
 #define TM_CMN_RST			0x10018
 #define TM_CMN_RST_EN			0x1
@@ -768,6 +778,48 @@ static struct phy *xpsgtr_xlate(struct device *dev,
 	return ERR_PTR(-EINVAL);
 }
 
+/*
+ * DebugFS
+ */
+
+static int xpsgtr_status_read(struct seq_file *seq, void *data)
+{
+	struct xpsgtr_phy *gtr_phy = seq->private;
+	struct clk *clk;
+	u32 pll_status;
+
+	mutex_lock(&gtr_phy->phy->mutex);
+	pll_status = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
+	clk = gtr_phy->dev->clk[gtr_phy->refclk];
+
+	seq_printf(seq, "Lane:            %u\n", gtr_phy->lane);
+	seq_printf(seq, "Protocol:        %s\n",
+		   xpsgtr_icm_str[gtr_phy->protocol]);
+	seq_printf(seq, "Instance:        %u\n", gtr_phy->instance);
+	seq_printf(seq, "Reference clock: %u (%pC)\n", gtr_phy->refclk, clk);
+	seq_printf(seq, "Reference rate:  %lu\n", clk_get_rate(clk));
+	seq_printf(seq, "PLL locked:      %s\n",
+		   pll_status & PLL_STATUS_LOCKED ? "yes" : "no");
+
+	mutex_unlock(&gtr_phy->phy->mutex);
+	return 0;
+}
+
+static int xpsgtr_status_open(struct inode *inode, struct file *f)
+{
+	struct xpsgtr_phy *gtr_phy = inode->i_private;
+
+	return single_open(f, xpsgtr_status_read, gtr_phy);
+}
+
+static const struct file_operations xpsgtr_status_ops = {
+	.owner = THIS_MODULE,
+	.open = xpsgtr_status_open,
+	.release = single_release,
+	.read = seq_read,
+	.llseek = seq_lseek
+};
+
 /*
  * Power Management
  */
@@ -917,6 +969,8 @@ static int xpsgtr_probe(struct platform_device *pdev)
 
 		gtr_phy->phy = phy;
 		phy_set_drvdata(phy, gtr_phy);
+		debugfs_create_file("status", 0444, phy->debugfs, gtr_phy,
+				    &xpsgtr_status_ops);
 	}
 
 	/* Register the PHY provider. */
-- 
2.35.1.1320.gc452695387.dirty


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-phy@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>,
	linux-kernel@vger.kernel.org, Michal Simek <michal.simek@amd.com>,
	linux-arm-kernel@lists.infradead.org,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH 3/3] phy: zynqmp: Add debugfs support
Date: Mon, 22 Apr 2024 14:58:03 -0400	[thread overview]
Message-ID: <20240422185803.3575319-4-sean.anderson@linux.dev> (raw)
In-Reply-To: <20240422185803.3575319-1-sean.anderson@linux.dev>

Add support for printing some basic status information to debugfs. This
is helpful when debugging phy consumers to make sure they are configuring
the phy appropriately.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/phy/xilinx/phy-zynqmp.c | 54 +++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 08c88dcd7799..e2e86943e9f3 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -122,6 +123,15 @@
 #define ICM_PROTOCOL_DP			0x4
 #define ICM_PROTOCOL_SGMII		0x5
 
+static const char *const xpsgtr_icm_str[] = {
+	[ICM_PROTOCOL_PD] = "powered down",
+	[ICM_PROTOCOL_PCIE] = "PCIe",
+	[ICM_PROTOCOL_SATA] = "SATA",
+	[ICM_PROTOCOL_USB] = "USB",
+	[ICM_PROTOCOL_DP] = "DisplayPort",
+	[ICM_PROTOCOL_SGMII] = "SGMII",
+};
+
 /* Test Mode common reset control  parameters */
 #define TM_CMN_RST			0x10018
 #define TM_CMN_RST_EN			0x1
@@ -768,6 +778,48 @@ static struct phy *xpsgtr_xlate(struct device *dev,
 	return ERR_PTR(-EINVAL);
 }
 
+/*
+ * DebugFS
+ */
+
+static int xpsgtr_status_read(struct seq_file *seq, void *data)
+{
+	struct xpsgtr_phy *gtr_phy = seq->private;
+	struct clk *clk;
+	u32 pll_status;
+
+	mutex_lock(&gtr_phy->phy->mutex);
+	pll_status = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
+	clk = gtr_phy->dev->clk[gtr_phy->refclk];
+
+	seq_printf(seq, "Lane:            %u\n", gtr_phy->lane);
+	seq_printf(seq, "Protocol:        %s\n",
+		   xpsgtr_icm_str[gtr_phy->protocol]);
+	seq_printf(seq, "Instance:        %u\n", gtr_phy->instance);
+	seq_printf(seq, "Reference clock: %u (%pC)\n", gtr_phy->refclk, clk);
+	seq_printf(seq, "Reference rate:  %lu\n", clk_get_rate(clk));
+	seq_printf(seq, "PLL locked:      %s\n",
+		   pll_status & PLL_STATUS_LOCKED ? "yes" : "no");
+
+	mutex_unlock(&gtr_phy->phy->mutex);
+	return 0;
+}
+
+static int xpsgtr_status_open(struct inode *inode, struct file *f)
+{
+	struct xpsgtr_phy *gtr_phy = inode->i_private;
+
+	return single_open(f, xpsgtr_status_read, gtr_phy);
+}
+
+static const struct file_operations xpsgtr_status_ops = {
+	.owner = THIS_MODULE,
+	.open = xpsgtr_status_open,
+	.release = single_release,
+	.read = seq_read,
+	.llseek = seq_lseek
+};
+
 /*
  * Power Management
  */
@@ -917,6 +969,8 @@ static int xpsgtr_probe(struct platform_device *pdev)
 
 		gtr_phy->phy = phy;
 		phy_set_drvdata(phy, gtr_phy);
+		debugfs_create_file("status", 0444, phy->debugfs, gtr_phy,
+				    &xpsgtr_status_ops);
 	}
 
 	/* Register the PHY provider. */
-- 
2.35.1.1320.gc452695387.dirty


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-phy@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>,
	linux-kernel@vger.kernel.org, Michal Simek <michal.simek@amd.com>,
	linux-arm-kernel@lists.infradead.org,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH 3/3] phy: zynqmp: Add debugfs support
Date: Mon, 22 Apr 2024 14:58:03 -0400	[thread overview]
Message-ID: <20240422185803.3575319-4-sean.anderson@linux.dev> (raw)
In-Reply-To: <20240422185803.3575319-1-sean.anderson@linux.dev>

Add support for printing some basic status information to debugfs. This
is helpful when debugging phy consumers to make sure they are configuring
the phy appropriately.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/phy/xilinx/phy-zynqmp.c | 54 +++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 08c88dcd7799..e2e86943e9f3 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -122,6 +123,15 @@
 #define ICM_PROTOCOL_DP			0x4
 #define ICM_PROTOCOL_SGMII		0x5
 
+static const char *const xpsgtr_icm_str[] = {
+	[ICM_PROTOCOL_PD] = "powered down",
+	[ICM_PROTOCOL_PCIE] = "PCIe",
+	[ICM_PROTOCOL_SATA] = "SATA",
+	[ICM_PROTOCOL_USB] = "USB",
+	[ICM_PROTOCOL_DP] = "DisplayPort",
+	[ICM_PROTOCOL_SGMII] = "SGMII",
+};
+
 /* Test Mode common reset control  parameters */
 #define TM_CMN_RST			0x10018
 #define TM_CMN_RST_EN			0x1
@@ -768,6 +778,48 @@ static struct phy *xpsgtr_xlate(struct device *dev,
 	return ERR_PTR(-EINVAL);
 }
 
+/*
+ * DebugFS
+ */
+
+static int xpsgtr_status_read(struct seq_file *seq, void *data)
+{
+	struct xpsgtr_phy *gtr_phy = seq->private;
+	struct clk *clk;
+	u32 pll_status;
+
+	mutex_lock(&gtr_phy->phy->mutex);
+	pll_status = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
+	clk = gtr_phy->dev->clk[gtr_phy->refclk];
+
+	seq_printf(seq, "Lane:            %u\n", gtr_phy->lane);
+	seq_printf(seq, "Protocol:        %s\n",
+		   xpsgtr_icm_str[gtr_phy->protocol]);
+	seq_printf(seq, "Instance:        %u\n", gtr_phy->instance);
+	seq_printf(seq, "Reference clock: %u (%pC)\n", gtr_phy->refclk, clk);
+	seq_printf(seq, "Reference rate:  %lu\n", clk_get_rate(clk));
+	seq_printf(seq, "PLL locked:      %s\n",
+		   pll_status & PLL_STATUS_LOCKED ? "yes" : "no");
+
+	mutex_unlock(&gtr_phy->phy->mutex);
+	return 0;
+}
+
+static int xpsgtr_status_open(struct inode *inode, struct file *f)
+{
+	struct xpsgtr_phy *gtr_phy = inode->i_private;
+
+	return single_open(f, xpsgtr_status_read, gtr_phy);
+}
+
+static const struct file_operations xpsgtr_status_ops = {
+	.owner = THIS_MODULE,
+	.open = xpsgtr_status_open,
+	.release = single_release,
+	.read = seq_read,
+	.llseek = seq_lseek
+};
+
 /*
  * Power Management
  */
@@ -917,6 +969,8 @@ static int xpsgtr_probe(struct platform_device *pdev)
 
 		gtr_phy->phy = phy;
 		phy_set_drvdata(phy, gtr_phy);
+		debugfs_create_file("status", 0444, phy->debugfs, gtr_phy,
+				    &xpsgtr_status_ops);
 	}
 
 	/* Register the PHY provider. */
-- 
2.35.1.1320.gc452695387.dirty


  parent reply	other threads:[~2024-04-22 18:58 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-22 18:58 [PATCH 0/3] phy: zynqmp: A PCIe fix and debugfs support Sean Anderson
2024-04-22 18:58 ` Sean Anderson
2024-04-22 18:58 ` Sean Anderson
2024-04-22 18:58 ` [PATCH 1/3] phy: zynqmp: Store instance instead of type Sean Anderson
2024-04-22 18:58   ` Sean Anderson
2024-04-22 18:58   ` Sean Anderson
2024-04-23  6:25   ` Michal Simek
2024-04-23  6:25     ` Michal Simek
2024-04-23  6:25     ` Michal Simek
2024-04-23 15:02     ` Sean Anderson
2024-04-23 15:02       ` Sean Anderson
2024-04-23 15:02       ` Sean Anderson
2024-04-24  6:38       ` Michal Simek
2024-04-24  6:38         ` Michal Simek
2024-04-24  6:38         ` Michal Simek
2024-04-25 15:28         ` Sean Anderson
2024-04-25 15:28           ` Sean Anderson
2024-04-25 15:28           ` Sean Anderson
2024-04-22 18:58 ` [PATCH 2/3] phy: zynqmp: Don't wait for PLL lock on nonzero PCIe lanes Sean Anderson
2024-04-22 18:58   ` Sean Anderson
2024-04-22 18:58   ` Sean Anderson
2024-04-23  6:25   ` Michal Simek
2024-04-23  6:25     ` Michal Simek
2024-04-23  6:25     ` Michal Simek
2024-04-23 15:03     ` Sean Anderson
2024-04-23 15:03       ` Sean Anderson
2024-04-23 15:03       ` Sean Anderson
2024-04-22 18:58 ` Sean Anderson [this message]
2024-04-22 18:58   ` [PATCH 3/3] phy: zynqmp: Add debugfs support Sean Anderson
2024-04-22 18:58   ` Sean Anderson
2024-05-04 11:58   ` Vinod Koul
2024-05-04 11:58     ` Vinod Koul
2024-05-04 11:58     ` Vinod Koul
2024-05-06 14:51     ` Sean Anderson
2024-05-06 14:51       ` Sean Anderson
2024-05-06 14:51       ` Sean Anderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240422185803.3575319-4-sean.anderson@linux.dev \
    --to=sean.anderson@linux.dev \
    --cc=kishon@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=michal.simek@amd.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.