[PATCH v3 06/14] dt-bindings: fsi: Document the FSI controller common properties

[Eddie James <eajames@linux.ibm.com>]

Since there are multiple FSI controllers documented, the common
properties should be documented separately and then referenced
from the specific controller documentation.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 .../bindings/fsi/fsi-controller.yaml          | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml

diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
new file mode 100644
index 000000000000..9e917295996d
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+  various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  no-scan-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+  "cfam@[0-9a-f],[0-9a-f]":
+    type: object
+    properties:
+      chip-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    required:
+      - reg
+
+    additionalProperties: true
+
+additionalProperties: true
+
+examples:
+  - |
+    fsi at 3400 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        compatible = "fsi-controller";
+        reg = <0x3400 0x400>;
+
+        cfam at 0,0 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0 0>;
+        };
+    };
-- 
2.39.3