From: Kevin Chen <kevin_chen@aspeedtech.com>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree
Date: Fri, 26 Jul 2024 11:09:37 -0000 [thread overview]
Message-ID: <20240726110355.2181563-9-kevin_chen@aspeedtech.com> (raw)
In-Reply-To: <20240726110355.2181563-1-kevin_chen@aspeedtech.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217 ++++++++++++++++++++++
2 files changed, 218 insertions(+)
create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 21cd3a87f385..c909c19dc5dd 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -34,3 +34,4 @@ subdir-y += tesla
subdir-y += ti
subdir-y += toshiba
subdir-y += xilinx
+subdir-y += aspeed
diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
new file mode 100644
index 000000000000..858ab95251e4
--- /dev/null
+++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <dt-bindings/clock/aspeed,ast2700-clk.h>
+#include <dt-bindings/reset/aspeed,ast2700-reset.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+ model = "Aspeed BMC";
+ compatible = "aspeed,ast2700";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial12 = &uart12;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <2>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <3>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ gic: interrupt-controller at 12200000 {
+ compatible = "arm,gic-v3";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #redistributor-regions = <1>;
+ reg = <0 0x12200000 0 0x10000>, //GICD
+ <0 0x12280000 0 0x80000>, //GICR
+ <0 0x40440000 0 0x1000>; //GICC
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ always-on;
+ };
+
+ soc0: soc at 10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ soc0_sram: sram at 10000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x10000000 0x0 0x20000>; /* 128KiB SRAM on soc0 */
+ ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ no-memory-wc;
+
+ exported at 0 {
+ reg = <0 0x0 0 0x20000>;
+ export;
+ };
+ };
+
+ syscon0: syscon at 12c02000 {
+ compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
+ reg = <0x0 0x12c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ silicon-id at 0 {
+ compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id";
+ reg = <0 0x0 0 0x4>;
+ };
+
+ scu_ic0: interrupt-controller at 1D0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2700-scu-ic0";
+ reg = <0 0x1d0 0 0xc>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ scu_ic1: interrupt-controller at 1E0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2700-scu-ic1";
+ reg = <0 0x1e0 0 0xc>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ soc0_rst: reset-controller at 200 {
+ reg = <0 0x200 0 0x40>;
+ };
+
+ soc0_clk: clock-controller at 240 {
+ reg = <0 0x240 0 0x1c0>;
+ };
+ };
+
+ };
+
+ soc1: soc at 14000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ syscon1: syscon at 14c02000 {
+ compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
+ reg = <0x0 0x14c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ soc1_rst: reset-controller at 200 {
+ #reset-cells = <1>;
+ };
+
+ soc1_clk: clock-controller at 240 {
+ reg = <0 0x240 0 0x1c0>;
+ };
+ };
+
+ uart12: serial at 14c33b00 {
+ compatible = "ns16550a";
+ reg = <0x0 0x14c33b00 0x0 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ };
+ };
+};
+
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Chen <kevin_chen@aspeedtech.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<joel@jms.id.au>, <andrew@codeconstruct.com.au>, <lee@kernel.org>,
<catalin.marinas@arm.com>, <will@kernel.org>, <arnd@arndb.de>,
<olof@lixom.net>, <soc@kernel.org>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <p.zabel@pengutronix.de>,
<quic_bjorande@quicinc.com>, <geert+renesas@glider.be>,
<dmitry.baryshkov@linaro.org>, <shawnguo@kernel.org>,
<neil.armstrong@linaro.org>, <m.szyprowski@samsung.com>,
<nfraprado@collabora.com>, <u-kumar1@ti.com>,
<kevin_chen@aspeedtech.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Subject: [PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree
Date: Fri, 26 Jul 2024 19:03:53 +0800 [thread overview]
Message-ID: <20240726110355.2181563-9-kevin_chen@aspeedtech.com> (raw)
In-Reply-To: <20240726110355.2181563-1-kevin_chen@aspeedtech.com>
---
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217 ++++++++++++++++++++++
2 files changed, 218 insertions(+)
create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 21cd3a87f385..c909c19dc5dd 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -34,3 +34,4 @@ subdir-y += tesla
subdir-y += ti
subdir-y += toshiba
subdir-y += xilinx
+subdir-y += aspeed
diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
new file mode 100644
index 000000000000..858ab95251e4
--- /dev/null
+++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <dt-bindings/clock/aspeed,ast2700-clk.h>
+#include <dt-bindings/reset/aspeed,ast2700-reset.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+ model = "Aspeed BMC";
+ compatible = "aspeed,ast2700";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial12 = &uart12;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <1>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <2>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a35";
+ enable-method = "psci";
+ device_type = "cpu";
+ reg = <3>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <1024>;
+ cache-level = <2>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a35-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ gic: interrupt-controller@12200000 {
+ compatible = "arm,gic-v3";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #redistributor-regions = <1>;
+ reg = <0 0x12200000 0 0x10000>, //GICD
+ <0 0x12280000 0 0x80000>, //GICR
+ <0 0x40440000 0 0x1000>; //GICC
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ arm,cpu-registers-not-fw-configured;
+ always-on;
+ };
+
+ soc0: soc@10000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ soc0_sram: sram@10000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x10000000 0x0 0x20000>; /* 128KiB SRAM on soc0 */
+ ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ no-memory-wc;
+
+ exported@0 {
+ reg = <0 0x0 0 0x20000>;
+ export;
+ };
+ };
+
+ syscon0: syscon@12c02000 {
+ compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
+ reg = <0x0 0x12c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ silicon-id@0 {
+ compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id";
+ reg = <0 0x0 0 0x4>;
+ };
+
+ scu_ic0: interrupt-controller@1D0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2700-scu-ic0";
+ reg = <0 0x1d0 0 0xc>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ scu_ic1: interrupt-controller@1E0 {
+ #interrupt-cells = <1>;
+ compatible = "aspeed,ast2700-scu-ic1";
+ reg = <0 0x1e0 0 0xc>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ };
+
+ soc0_rst: reset-controller@200 {
+ reg = <0 0x200 0 0x40>;
+ };
+
+ soc0_clk: clock-controller@240 {
+ reg = <0 0x240 0 0x1c0>;
+ };
+ };
+
+ };
+
+ soc1: soc@14000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ syscon1: syscon@14c02000 {
+ compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
+ reg = <0x0 0x14c02000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ soc1_rst: reset-controller@200 {
+ #reset-cells = <1>;
+ };
+
+ soc1_clk: clock-controller@240 {
+ reg = <0 0x240 0 0x1c0>;
+ };
+ };
+
+ uart12: serial@14c33b00 {
+ compatible = "ns16550a";
+ reg = <0x0 0x14c33b00 0x0 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
+ no-loopback-test;
+ pinctrl-names = "default";
+ };
+ };
+};
+
--
2.34.1
next prev parent reply other threads:[~2024-07-26 11:09 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-26 11:03 [PATCH v1 00/10] Introduce ASPEED AST27XX BMC SoC Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 01/10] dt-binding: mfd: aspeed,ast2x00-scu: Add binding for ASPEED AST2700 SCU Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:10 ` Krzysztof Kozlowski
2024-07-26 11:10 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-10-07 11:03 ` Krzysztof Kozlowski
2024-10-07 11:03 ` Krzysztof Kozlowski
2024-10-07 11:03 ` Krzysztof Kozlowski
2024-10-07 11:03 ` Krzysztof Kozlowski
2024-08-16 4:06 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 02/10] dt-binding: clk: ast2700: Add binding for Aspeed AST27xx Clock Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:11 ` Krzysztof Kozlowski
2024-07-26 11:11 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 03/10] clk: ast2700: add clock controller Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:13 ` Krzysztof Kozlowski
2024-07-26 11:13 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 04/10] dt-bindings: reset: ast2700: Add binding for ASPEED AST2700 Reset Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:13 ` Krzysztof Kozlowski
2024-07-26 11:13 ` Krzysztof Kozlowski
2024-08-16 4:07 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 05/10] dt-bindings: arm: aspeed: Add maintainer Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:14 ` Krzysztof Kozlowski
2024-07-26 11:14 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 06/10] dt-bindings: arm: aspeed: Add aspeed,ast2700-evb compatible string Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:15 ` Krzysztof Kozlowski
2024-07-26 11:15 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:08 ` Kevin Chen
2024-08-16 4:08 ` Kevin Chen
2024-08-16 5:17 ` Krzysztof Kozlowski
2024-08-16 5:17 ` Krzysztof Kozlowski
2024-10-07 9:26 ` Kevin Chen
2024-10-07 9:26 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 07/10] arm64: aspeed: Add support for ASPEED AST2700 BMC SoC Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:16 ` Krzysztof Kozlowski
2024-07-26 11:16 ` Krzysztof Kozlowski
2024-08-15 5:51 ` 回覆: " Kevin Chen
2024-08-15 5:51 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-07-26 11:03 ` Kevin Chen [this message]
2024-07-26 11:09 ` [PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree Kevin Chen
2024-07-26 11:19 ` Krzysztof Kozlowski
2024-07-26 11:19 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 5:08 ` Krzysztof Kozlowski
2024-08-16 5:08 ` Krzysztof Kozlowski
2024-10-07 9:26 ` Kevin Chen
2024-10-07 9:26 ` Kevin Chen
2024-10-07 11:05 ` Krzysztof Kozlowski
2024-10-07 11:05 ` Krzysztof Kozlowski
2024-08-16 4:07 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 09/10] arm64: dts: aspeed: Add initial AST2700 EVB " Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 11:16 ` Krzysztof Kozlowski
2024-07-26 11:16 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-08-16 4:07 ` Kevin Chen
2024-07-26 11:03 ` [PATCH v1 10/10] arm64: defconfig: Add ASPEED AST2700 family support Kevin Chen
2024-07-26 11:09 ` Kevin Chen
2024-07-26 13:09 ` [PATCH v1 00/10] Introduce ASPEED AST27XX BMC SoC Rob Herring
2024-07-26 13:09 ` Rob Herring (Arm)
2024-07-26 13:33 ` Krzysztof Kozlowski
2024-07-26 13:33 ` Krzysztof Kozlowski
2024-08-15 5:50 ` 回覆: " Kevin Chen
2024-08-15 5:50 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
2024-08-16 4:06 ` Kevin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240726110355.2181563-9-kevin_chen@aspeedtech.com \
--to=kevin_chen@aspeedtech.com \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.