[PATCH v2 2/2] arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook

[Andy Yan <andyshrk@163.com>]

Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0].

Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080

This patch add basic support to bringup eMMC/USB
HOST/WiFi/TouchPad/Battery/PCIE NVME,
and can also drive a HDMI output with out of tree hdmi patches.

[0] https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588

Signed-off-by: Andy Yan <andyshrk@163.com>

---

Changes in v2:
- rename dts to rk3588-coolpi-cm5-genbook
- enable touchpad
- enable battery
- descripte it as CoolPi CM5 GenBook

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rockchip/rk3588-coolpi-cm5-genbook.dts    | 349 ++++++++++++++++++
 2 files changed, 350 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 8fa469db400c..9cc8ef024fd7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-armsom-sige7.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-genbook.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-wifi.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
new file mode 100644
index 000000000000..875a5c70e7ae
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-genbook.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "rk3588-coolpi-cm5.dtsi"
+
+/ {
+	model = "CoolPi CM5 GenBook";
+	compatible = "coolpi,genbook", "coolpi,pi-cm5", "rockchip,rk3588";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		power-supply = <&vcc12v_dcin>;
+		pwms = <&pwm6 0 25000 0>;
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
+	charger: dc-charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio1 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		heartbeat_led: led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		wlan_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+
+		charging_red: led-2 {
+			function = LED_FUNCTION_CHARGING;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <7000000>;
+		regulator-max-microvolt = <7000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <7000000>;
+		regulator-max-microvolt = <7000000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_lcd: vcc3v3-lcd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_lcd";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcdpwr_en>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_usb: vcc5v0-usb-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_pwren>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc5v0_usb_host0: vcc5v0_usb30_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_host";
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m3_xfer>;
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x69 0x63 0x63 0x62 0x62 0x5F
+			0x52 0x73 0x4C 0x5A 0x5B 0x4B 0x42 0x3A
+			0x33 0x2D 0x29 0x28 0x2E 0x31 0x3C 0x49
+			0x2C 0x2C 0x0C 0xCD 0x30 0x51 0x50 0x66
+			0x74 0x74 0x75 0x78 0x41 0x1B 0x84 0x5F
+			0x0B 0x34 0x1C 0x45 0x89 0x92 0xA0 0x13
+			0x2C 0x55 0xAB 0xCB 0x80 0x5E 0x7B 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x10 0x18 0x21
+			>;
+
+		cellwise,monitor-interval-ms = <3000>;
+		monitored-battery = <&battery>;
+		power-supplies = <&charger>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5m3_xfer>;
+
+	touchpad: touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x0020>;
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+/* M.2 E-Key */
+&pcie2x1l0 {
+	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	status = "disabled";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+/* M.2 M-Key ssd */
+&pcie3x4 {
+	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_sys>;
+	status = "okay";
+};
+
+&pinctrl {
+	lcd {
+		lcdpwr_en: lcdpwr-en {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		bl_en: bl-en {
+			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_pwren: usb-pwren {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_otg_pwren: usb-otg-pwren {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		bt_pwron: bt-pwron {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_clkreq: pcie-clkreq {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_rst: pcie-rst {
+			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_pwron: wifi-pwron {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		pcie_wake: pcie-wake {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm6 {
+	pinctrl-0 = <&pwm6m1_pins>;
+	status = "okay";
+};
+
+&sdmmc {
+	status = "disabled";
+};
+
+&sfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fspim2_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <100000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_usb_host0>;
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_usb>;
+	status = "okay";
+};
+
+&usbdp_phy1 {
+	status = "okay";
+};
+
+/* For Keypad */
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+/* Type C port */
+&usb_host0_xhci {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	status = "okay";
+};
+
+/* connected to a HUB for camera and BT */
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+/* USB A out */
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip