From: Conor Dooley <conor@kernel.org>
To: keguang.zhang@gmail.com
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH v8 1/2] dt-bindings: mtd: Add Loongson-1 NAND Controller
Date: Thu, 8 Aug 2024 16:37:25 +0100 [thread overview]
Message-ID: <20240808-backyard-unglue-3cf429ad8da5@spud> (raw)
In-Reply-To: <20240808-loongson1-nand-v8-1-c96dea418b41@gmail.com>
[-- Attachment #1.1: Type: text/plain, Size: 3270 bytes --]
On Thu, Aug 08, 2024 at 07:22:19PM +0800, Keguang Zhang via B4 Relay wrote:
> From: Keguang Zhang <keguang.zhang@gmail.com>
>
> Add devicetree binding document for Loongson-1 NAND Controller.
>
> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> ---
> Changes in v8:
> - Add a description part.
> - Adjust the compatible because the match data for ls1c-nfc differs from ls1b-nfc.
> - Mark 'nand-use-soft-ecc-engine' and 'nand-ecc-algo' as mandatory.
> - Delete the superfluous blank lines.
>
> Changes in v7:
> - rename the file to loongson,ls1b-nfc.yaml
>
> Changes in v6:
> - A newly added patch
> ---
> .../devicetree/bindings/mtd/loongson,ls1b-nfc.yaml | 75 ++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
> new file mode 100644
> index 000000000000..7ce335324a29
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
When I first read "nfc" here I thought it was a copy-paste mistake, as
"nfc" is a technology of it's own. I think it would make sense to rename
to "loongson,ls1b-nand-controller" etc to remove that sort of confusion.
These devices might not implement NFC, but what's to say that a future
device will not?
Cheers,
Conor.
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/loongson,ls1b-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1 NAND Controller
> +
> +maintainers:
> + - Keguang Zhang <keguang.zhang@gmail.com>
> +
> +description: |
This | is not needed.
> + The Loongson-1 NAND controller abstracts all supported operations,
> + meaning it does not support low-level access to raw NAND flash chips.
> + Moreover, the controller is paired with the DMA engine to perform
> + READ and PROGRAM functions.
> +
> +allOf:
> + - $ref: nand-controller.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - loongson,ls1b-nfc
> + - loongson,ls1c-nfc
> + - items:
> + - enum:
> + - loongson,ls1a-nfc
> + - const: loongson,ls1b-nfc
> +
> + reg:
> + maxItems: 1
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + const: rxtx
> +
> +patternProperties:
> + "^nand@[0-3]$":
> + type: object
> + $ref: raw-nand-chip.yaml
> +
> + required:
> + - nand-use-soft-ecc-engine
> + - nand-ecc-algo
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - dmas
> + - dma-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + nand-controller@1fe78000 {
> + compatible = "loongson,ls1b-nfc";
> + reg = <0x1fe78000 0x40>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dma 0>;
> + dma-names = "rxtx";
> +
> + nand@0 {
> + reg = <0>;
> + nand-use-soft-ecc-engine;
> + nand-ecc-algo = "hamming";
> + };
> + };
>
> --
> 2.43.0
>
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 144 bytes --]
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor@kernel.org>
To: keguang.zhang@gmail.com
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH v8 1/2] dt-bindings: mtd: Add Loongson-1 NAND Controller
Date: Thu, 8 Aug 2024 16:37:25 +0100 [thread overview]
Message-ID: <20240808-backyard-unglue-3cf429ad8da5@spud> (raw)
In-Reply-To: <20240808-loongson1-nand-v8-1-c96dea418b41@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3270 bytes --]
On Thu, Aug 08, 2024 at 07:22:19PM +0800, Keguang Zhang via B4 Relay wrote:
> From: Keguang Zhang <keguang.zhang@gmail.com>
>
> Add devicetree binding document for Loongson-1 NAND Controller.
>
> Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
> ---
> Changes in v8:
> - Add a description part.
> - Adjust the compatible because the match data for ls1c-nfc differs from ls1b-nfc.
> - Mark 'nand-use-soft-ecc-engine' and 'nand-ecc-algo' as mandatory.
> - Delete the superfluous blank lines.
>
> Changes in v7:
> - rename the file to loongson,ls1b-nfc.yaml
>
> Changes in v6:
> - A newly added patch
> ---
> .../devicetree/bindings/mtd/loongson,ls1b-nfc.yaml | 75 ++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
> new file mode 100644
> index 000000000000..7ce335324a29
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/loongson,ls1b-nfc.yaml
When I first read "nfc" here I thought it was a copy-paste mistake, as
"nfc" is a technology of it's own. I think it would make sense to rename
to "loongson,ls1b-nand-controller" etc to remove that sort of confusion.
These devices might not implement NFC, but what's to say that a future
device will not?
Cheers,
Conor.
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mtd/loongson,ls1b-nfc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1 NAND Controller
> +
> +maintainers:
> + - Keguang Zhang <keguang.zhang@gmail.com>
> +
> +description: |
This | is not needed.
> + The Loongson-1 NAND controller abstracts all supported operations,
> + meaning it does not support low-level access to raw NAND flash chips.
> + Moreover, the controller is paired with the DMA engine to perform
> + READ and PROGRAM functions.
> +
> +allOf:
> + - $ref: nand-controller.yaml
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - loongson,ls1b-nfc
> + - loongson,ls1c-nfc
> + - items:
> + - enum:
> + - loongson,ls1a-nfc
> + - const: loongson,ls1b-nfc
> +
> + reg:
> + maxItems: 1
> +
> + dmas:
> + maxItems: 1
> +
> + dma-names:
> + const: rxtx
> +
> +patternProperties:
> + "^nand@[0-3]$":
> + type: object
> + $ref: raw-nand-chip.yaml
> +
> + required:
> + - nand-use-soft-ecc-engine
> + - nand-ecc-algo
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - dmas
> + - dma-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + nand-controller@1fe78000 {
> + compatible = "loongson,ls1b-nfc";
> + reg = <0x1fe78000 0x40>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&dma 0>;
> + dma-names = "rxtx";
> +
> + nand@0 {
> + reg = <0>;
> + nand-use-soft-ecc-engine;
> + nand-ecc-algo = "hamming";
> + };
> + };
>
> --
> 2.43.0
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2024-08-08 15:37 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 11:22 [PATCH v8 0/2] Add support for Loongson-1 NAND Keguang Zhang
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
2024-08-08 11:22 ` [PATCH v8 1/2] dt-bindings: mtd: Add Loongson-1 NAND Controller Keguang Zhang
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
2024-08-08 15:37 ` Conor Dooley [this message]
2024-08-08 15:37 ` Conor Dooley
2024-08-09 6:47 ` Keguang Zhang
2024-08-09 6:47 ` Keguang Zhang
2024-08-09 14:49 ` Conor Dooley
2024-08-09 14:49 ` Conor Dooley
2024-08-14 7:12 ` Miquel Raynal
2024-08-14 7:12 ` Miquel Raynal
2024-08-14 14:23 ` Conor Dooley
2024-08-14 14:23 ` Conor Dooley
2024-08-14 14:48 ` Miquel Raynal
2024-08-14 14:48 ` Miquel Raynal
2024-08-19 2:51 ` Keguang Zhang
2024-08-19 2:51 ` Keguang Zhang
2024-08-08 11:22 ` [PATCH v8 2/2] mtd: rawnand: Add Loongson-1 NAND Controller driver Keguang Zhang
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
2024-08-08 11:22 ` Keguang Zhang via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240808-backyard-unglue-3cf429ad8da5@spud \
--to=conor@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=keguang.zhang@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.