[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
certain interfaces due to the lack of synchronization during the 
commit updates. These issues have been corrected in the v1 version.

version 1 changes
1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
  devm_clk_get_enabled().
2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
  devm_clk_get_enabled().
3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
  corrected to devm_clk_get_enabled().

Lei Liu (5):
  usb: aspeed_udc: Use devm_clk_get_enabled() helpers
  usb: pxa27x_udc: Use devm_clk_get_enabled() helpers
  usb: r8a66597-udc: Use devm_clk_get_enabled() helpers
  usb: mpfs: Use devm_clk_get_enabled() helpers
  usb: ux500: Use devm_clk_get_enabled() helpers

 drivers/usb/gadget/udc/aspeed_udc.c   |  9 +--------
 drivers/usb/gadget/udc/pxa27x_udc.c   |  6 +-----
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 drivers/usb/musb/mpfs.c               | 22 ++++++----------------
 drivers/usb/musb/ux500.c              | 18 ++++--------------
 5 files changed, 16 insertions(+), 55 deletions(-)

-- 
2.34.1

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
certain interfaces due to the lack of synchronization during the 
commit updates. These issues have been corrected in the v1 version.

version 1 changes
1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
  devm_clk_get_enabled().
2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
  devm_clk_get_enabled().
3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
  corrected to devm_clk_get_enabled().

Lei Liu (5):
  usb: aspeed_udc: Use devm_clk_get_enabled() helpers
  usb: pxa27x_udc: Use devm_clk_get_enabled() helpers
  usb: r8a66597-udc: Use devm_clk_get_enabled() helpers
  usb: mpfs: Use devm_clk_get_enabled() helpers
  usb: ux500: Use devm_clk_get_enabled() helpers

 drivers/usb/gadget/udc/aspeed_udc.c   |  9 +--------
 drivers/usb/gadget/udc/pxa27x_udc.c   |  6 +-----
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 drivers/usb/musb/mpfs.c               | 22 ++++++----------------
 drivers/usb/musb/ux500.c              | 18 ++++--------------
 5 files changed, 16 insertions(+), 55 deletions(-)

-- 
2.34.1

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
certain interfaces due to the lack of synchronization during the 
commit updates. These issues have been corrected in the v1 version.

version 1 changes
1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
  devm_clk_get_enabled().
2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
  devm_clk_get_enabled().
3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
  corrected to devm_clk_get_enabled().

Lei Liu (5):
  usb: aspeed_udc: Use devm_clk_get_enabled() helpers
  usb: pxa27x_udc: Use devm_clk_get_enabled() helpers
  usb: r8a66597-udc: Use devm_clk_get_enabled() helpers
  usb: mpfs: Use devm_clk_get_enabled() helpers
  usb: ux500: Use devm_clk_get_enabled() helpers

 drivers/usb/gadget/udc/aspeed_udc.c   |  9 +--------
 drivers/usb/gadget/udc/pxa27x_udc.c   |  6 +-----
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 drivers/usb/musb/mpfs.c               | 22 ++++++----------------
 drivers/usb/musb/ux500.c              | 18 ++++--------------
 5 files changed, 16 insertions(+), 55 deletions(-)

-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 1/5] usb: aspeed_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/aspeed_udc.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c
index f4781e611aaa..a362e31f7550 100644
--- a/drivers/usb/gadget/udc/aspeed_udc.c
+++ b/drivers/usb/gadget/udc/aspeed_udc.c
@@ -1459,8 +1459,6 @@ static void ast_udc_remove(struct platform_device *pdev)
 	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
 	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
 
-	clk_disable_unprepare(udc->clk);
-
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	if (udc->ep0_buf)
@@ -1500,16 +1498,11 @@ static int ast_udc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, udc);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk)) {
 		rc = PTR_ERR(udc->clk);
 		goto err;
 	}
-	rc = clk_prepare_enable(udc->clk);
-	if (rc) {
-		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
-		goto err;
-	}
 
 	/* Check if we need to limit the HW to USB1 */
 	max_speed = usb_get_maximum_speed(&pdev->dev);
-- 
2.34.1

[PATCH v1 1/5] usb: aspeed_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/aspeed_udc.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c
index f4781e611aaa..a362e31f7550 100644
--- a/drivers/usb/gadget/udc/aspeed_udc.c
+++ b/drivers/usb/gadget/udc/aspeed_udc.c
@@ -1459,8 +1459,6 @@ static void ast_udc_remove(struct platform_device *pdev)
 	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
 	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
 
-	clk_disable_unprepare(udc->clk);
-
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	if (udc->ep0_buf)
@@ -1500,16 +1498,11 @@ static int ast_udc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, udc);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk)) {
 		rc = PTR_ERR(udc->clk);
 		goto err;
 	}
-	rc = clk_prepare_enable(udc->clk);
-	if (rc) {
-		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
-		goto err;
-	}
 
 	/* Check if we need to limit the HW to USB1 */
 	max_speed = usb_get_maximum_speed(&pdev->dev);
-- 
2.34.1

[PATCH v1 1/5] usb: aspeed_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/aspeed_udc.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed_udc.c b/drivers/usb/gadget/udc/aspeed_udc.c
index f4781e611aaa..a362e31f7550 100644
--- a/drivers/usb/gadget/udc/aspeed_udc.c
+++ b/drivers/usb/gadget/udc/aspeed_udc.c
@@ -1459,8 +1459,6 @@ static void ast_udc_remove(struct platform_device *pdev)
 	ctrl = ast_udc_read(udc, AST_UDC_FUNC_CTRL) & ~USB_UPSTREAM_EN;
 	ast_udc_write(udc, ctrl, AST_UDC_FUNC_CTRL);
 
-	clk_disable_unprepare(udc->clk);
-
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	if (udc->ep0_buf)
@@ -1500,16 +1498,11 @@ static int ast_udc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, udc);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk)) {
 		rc = PTR_ERR(udc->clk);
 		goto err;
 	}
-	rc = clk_prepare_enable(udc->clk);
-	if (rc) {
-		dev_err(&pdev->dev, "Failed to enable clock (0x%x)\n", rc);
-		goto err;
-	}
 
 	/* Check if we need to limit the HW to USB1 */
 	max_speed = usb_get_maximum_speed(&pdev->dev);
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 2/5] usb: pxa27x_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be 
corrected to devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 1a6317e4b2a3..6e99e75f1acb 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2398,14 +2398,10 @@ static int pxa_udc_probe(struct platform_device *pdev)
 	if (udc->gpiod)
 		gpiod_direction_output(udc->gpiod, 0);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk))
 		return PTR_ERR(udc->clk);
 
-	retval = clk_prepare(udc->clk);
-	if (retval)
-		return retval;
-
 	udc->vbus_sensed = 0;
 
 	the_controller = udc;
-- 
2.34.1

[PATCH v1 2/5] usb: pxa27x_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be 
corrected to devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 1a6317e4b2a3..6e99e75f1acb 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2398,14 +2398,10 @@ static int pxa_udc_probe(struct platform_device *pdev)
 	if (udc->gpiod)
 		gpiod_direction_output(udc->gpiod, 0);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk))
 		return PTR_ERR(udc->clk);
 
-	retval = clk_prepare(udc->clk);
-	if (retval)
-		return retval;
-
 	udc->vbus_sensed = 0;
 
 	the_controller = udc;
-- 
2.34.1

[PATCH v1 2/5] usb: pxa27x_udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be 
corrected to devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 1a6317e4b2a3..6e99e75f1acb 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2398,14 +2398,10 @@ static int pxa_udc_probe(struct platform_device *pdev)
 	if (udc->gpiod)
 		gpiod_direction_output(udc->gpiod, 0);
 
-	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	udc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(udc->clk))
 		return PTR_ERR(udc->clk);
 
-	retval = clk_prepare(udc->clk);
-	if (retval)
-		return retval;
-
 	udc->vbus_sensed = 0;
 
 	the_controller = udc;
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 3/5] usb: r8a66597-udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index db4a10a979f9..bdbe5ead741e 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1812,10 +1812,6 @@ static void r8a66597_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-
-	if (r8a66597->pdata->on_chip) {
-		clk_disable_unprepare(r8a66597->clk);
-	}
 }
 
 static void nop_completion(struct usb_ep *ep, struct usb_request *r)
@@ -1876,18 +1872,17 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	if (r8a66597->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-		r8a66597->clk = devm_clk_get(dev, clk_name);
+		r8a66597->clk = devm_clk_get_enabled(dev, clk_name);
 		if (IS_ERR(r8a66597->clk)) {
 			dev_err(dev, "cannot get clock \"%s\"\n", clk_name);
 			return PTR_ERR(r8a66597->clk);
 		}
-		clk_prepare_enable(r8a66597->clk);
 	}
 
 	if (r8a66597->pdata->sudmac) {
 		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
 		if (ret < 0)
-			goto clean_up2;
+			goto err_add_udc;
 	}
 
 	disable_controller(r8a66597); /* make sure controller is disabled */
@@ -1896,7 +1891,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 			       udc_name, r8a66597);
 	if (ret < 0) {
 		dev_err(dev, "request_irq error (%d)\n", ret);
-		goto clean_up2;
+		goto err_add_udc;
 	}
 
 	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
@@ -1939,7 +1934,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 							GFP_KERNEL);
 	if (r8a66597->ep0_req == NULL) {
 		ret = -ENOMEM;
-		goto clean_up2;
+		goto err_add_udc;
 	}
 	r8a66597->ep0_req->complete = nop_completion;
 
@@ -1952,9 +1947,6 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 err_add_udc:
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-clean_up2:
-	if (r8a66597->pdata->on_chip)
-		clk_disable_unprepare(r8a66597->clk);
 
 	if (r8a66597->ep0_req)
 		r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-- 
2.34.1

[PATCH v1 3/5] usb: r8a66597-udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index db4a10a979f9..bdbe5ead741e 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1812,10 +1812,6 @@ static void r8a66597_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-
-	if (r8a66597->pdata->on_chip) {
-		clk_disable_unprepare(r8a66597->clk);
-	}
 }
 
 static void nop_completion(struct usb_ep *ep, struct usb_request *r)
@@ -1876,18 +1872,17 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	if (r8a66597->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-		r8a66597->clk = devm_clk_get(dev, clk_name);
+		r8a66597->clk = devm_clk_get_enabled(dev, clk_name);
 		if (IS_ERR(r8a66597->clk)) {
 			dev_err(dev, "cannot get clock \"%s\"\n", clk_name);
 			return PTR_ERR(r8a66597->clk);
 		}
-		clk_prepare_enable(r8a66597->clk);
 	}
 
 	if (r8a66597->pdata->sudmac) {
 		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
 		if (ret < 0)
-			goto clean_up2;
+			goto err_add_udc;
 	}
 
 	disable_controller(r8a66597); /* make sure controller is disabled */
@@ -1896,7 +1891,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 			       udc_name, r8a66597);
 	if (ret < 0) {
 		dev_err(dev, "request_irq error (%d)\n", ret);
-		goto clean_up2;
+		goto err_add_udc;
 	}
 
 	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
@@ -1939,7 +1934,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 							GFP_KERNEL);
 	if (r8a66597->ep0_req == NULL) {
 		ret = -ENOMEM;
-		goto clean_up2;
+		goto err_add_udc;
 	}
 	r8a66597->ep0_req->complete = nop_completion;
 
@@ -1952,9 +1947,6 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 err_add_udc:
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-clean_up2:
-	if (r8a66597->pdata->on_chip)
-		clk_disable_unprepare(r8a66597->clk);
 
 	if (r8a66597->ep0_req)
 		r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-- 
2.34.1

[PATCH v1 3/5] usb: r8a66597-udc: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/gadget/udc/r8a66597-udc.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index db4a10a979f9..bdbe5ead741e 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -1812,10 +1812,6 @@ static void r8a66597_remove(struct platform_device *pdev)
 	usb_del_gadget_udc(&r8a66597->gadget);
 	del_timer_sync(&r8a66597->timer);
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-
-	if (r8a66597->pdata->on_chip) {
-		clk_disable_unprepare(r8a66597->clk);
-	}
 }
 
 static void nop_completion(struct usb_ep *ep, struct usb_request *r)
@@ -1876,18 +1872,17 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	if (r8a66597->pdata->on_chip) {
 		snprintf(clk_name, sizeof(clk_name), "usb%d", pdev->id);
-		r8a66597->clk = devm_clk_get(dev, clk_name);
+		r8a66597->clk = devm_clk_get_enabled(dev, clk_name);
 		if (IS_ERR(r8a66597->clk)) {
 			dev_err(dev, "cannot get clock \"%s\"\n", clk_name);
 			return PTR_ERR(r8a66597->clk);
 		}
-		clk_prepare_enable(r8a66597->clk);
 	}
 
 	if (r8a66597->pdata->sudmac) {
 		ret = r8a66597_sudmac_ioremap(r8a66597, pdev);
 		if (ret < 0)
-			goto clean_up2;
+			goto err_add_udc;
 	}
 
 	disable_controller(r8a66597); /* make sure controller is disabled */
@@ -1896,7 +1891,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 			       udc_name, r8a66597);
 	if (ret < 0) {
 		dev_err(dev, "request_irq error (%d)\n", ret);
-		goto clean_up2;
+		goto err_add_udc;
 	}
 
 	INIT_LIST_HEAD(&r8a66597->gadget.ep_list);
@@ -1939,7 +1934,7 @@ static int r8a66597_probe(struct platform_device *pdev)
 							GFP_KERNEL);
 	if (r8a66597->ep0_req == NULL) {
 		ret = -ENOMEM;
-		goto clean_up2;
+		goto err_add_udc;
 	}
 	r8a66597->ep0_req->complete = nop_completion;
 
@@ -1952,9 +1947,6 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 err_add_udc:
 	r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-clean_up2:
-	if (r8a66597->pdata->on_chip)
-		clk_disable_unprepare(r8a66597->clk);
 
 	if (r8a66597->ep0_req)
 		r8a66597_free_request(&r8a66597->ep[0].ep, r8a66597->ep0_req);
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 4/5] usb: mpfs: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of devm_clk_get_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/mpfs.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
index 29c7e5cdb230..06faf5ab22e6 100644
--- a/drivers/usb/musb/mpfs.c
+++ b/drivers/usb/musb/mpfs.c
@@ -159,19 +159,13 @@ static int mpfs_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err_phy_release;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err_phy_release;
-	}
-
 	musb_pdev->dev.parent = dev;
 	musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
 	musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
@@ -184,7 +178,7 @@ static int mpfs_probe(struct platform_device *pdev)
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		ret = -ENOMEM;
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	pdata->config = &mpfs_musb_hdrc_config;
@@ -203,7 +197,7 @@ static int mpfs_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to register usb-phy %ld\n",
 			PTR_ERR(glue->phy));
 		ret = PTR_ERR(glue->phy);
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	platform_set_drvdata(pdev, glue);
@@ -211,27 +205,24 @@ static int mpfs_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(dev, "failed to add resources\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(dev, "failed to add platform_data\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add(musb_pdev);
 	if (ret) {
 		dev_err(dev, "failed to register musb device\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
 	return 0;
 
-err_clk_disable:
-	clk_disable_unprepare(clk);
-
 err_phy_release:
 	usb_phy_generic_unregister(glue->phy);
 	platform_device_put(musb_pdev);
@@ -242,7 +233,6 @@ static void mpfs_remove(struct platform_device *pdev)
 {
 	struct mpfs_glue *glue = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(glue->clk);
 	platform_device_unregister(glue->musb);
 	usb_phy_generic_unregister(pdev);
 }
-- 
2.34.1

[PATCH v1 4/5] usb: mpfs: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of devm_clk_get_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/mpfs.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
index 29c7e5cdb230..06faf5ab22e6 100644
--- a/drivers/usb/musb/mpfs.c
+++ b/drivers/usb/musb/mpfs.c
@@ -159,19 +159,13 @@ static int mpfs_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err_phy_release;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err_phy_release;
-	}
-
 	musb_pdev->dev.parent = dev;
 	musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
 	musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
@@ -184,7 +178,7 @@ static int mpfs_probe(struct platform_device *pdev)
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		ret = -ENOMEM;
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	pdata->config = &mpfs_musb_hdrc_config;
@@ -203,7 +197,7 @@ static int mpfs_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to register usb-phy %ld\n",
 			PTR_ERR(glue->phy));
 		ret = PTR_ERR(glue->phy);
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	platform_set_drvdata(pdev, glue);
@@ -211,27 +205,24 @@ static int mpfs_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(dev, "failed to add resources\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(dev, "failed to add platform_data\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add(musb_pdev);
 	if (ret) {
 		dev_err(dev, "failed to register musb device\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
 	return 0;
 
-err_clk_disable:
-	clk_disable_unprepare(clk);
-
 err_phy_release:
 	usb_phy_generic_unregister(glue->phy);
 	platform_device_put(musb_pdev);
@@ -242,7 +233,6 @@ static void mpfs_remove(struct platform_device *pdev)
 {
 	struct mpfs_glue *glue = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(glue->clk);
 	platform_device_unregister(glue->musb);
 	usb_phy_generic_unregister(pdev);
 }
-- 
2.34.1

[PATCH v1 4/5] usb: mpfs: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of devm_clk_get_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/mpfs.c | 22 ++++++----------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c
index 29c7e5cdb230..06faf5ab22e6 100644
--- a/drivers/usb/musb/mpfs.c
+++ b/drivers/usb/musb/mpfs.c
@@ -159,19 +159,13 @@ static int mpfs_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err_phy_release;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err_phy_release;
-	}
-
 	musb_pdev->dev.parent = dev;
 	musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39);
 	musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask;
@@ -184,7 +178,7 @@ static int mpfs_probe(struct platform_device *pdev)
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata) {
 		ret = -ENOMEM;
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	pdata->config = &mpfs_musb_hdrc_config;
@@ -203,7 +197,7 @@ static int mpfs_probe(struct platform_device *pdev)
 		dev_err(dev, "failed to register usb-phy %ld\n",
 			PTR_ERR(glue->phy));
 		ret = PTR_ERR(glue->phy);
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	platform_set_drvdata(pdev, glue);
@@ -211,27 +205,24 @@ static int mpfs_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(dev, "failed to add resources\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(dev, "failed to add platform_data\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	ret = platform_device_add(musb_pdev);
 	if (ret) {
 		dev_err(dev, "failed to register musb device\n");
-		goto err_clk_disable;
+		goto err_phy_release;
 	}
 
 	dev_info(&pdev->dev, "Registered MPFS MUSB driver\n");
 	return 0;
 
-err_clk_disable:
-	clk_disable_unprepare(clk);
-
 err_phy_release:
 	usb_phy_generic_unregister(glue->phy);
 	platform_device_put(musb_pdev);
@@ -242,7 +233,6 @@ static void mpfs_remove(struct platform_device *pdev)
 {
 	struct mpfs_glue *glue = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(glue->clk);
 	platform_device_unregister(glue->musb);
 	usb_phy_generic_unregister(pdev);
 }
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 5/5] usb: ux500: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/ux500.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index c8d9d2a1d2f0..51ce67678c0c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -246,19 +246,13 @@ static int ux500_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err1;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err1;
-	}
-
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
@@ -276,26 +270,23 @@ static int ux500_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err1;
 	}
 
 	return 0;
 
-err2:
-	clk_disable_unprepare(clk);
-
 err1:
 	platform_device_put(musb);
 
@@ -308,7 +299,6 @@ static void ux500_remove(struct platform_device *pdev)
 	struct ux500_glue	*glue = platform_get_drvdata(pdev);
 
 	platform_device_unregister(glue->musb);
-	clk_disable_unprepare(glue->clk);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.34.1

[PATCH v1 5/5] usb: ux500: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/ux500.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index c8d9d2a1d2f0..51ce67678c0c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -246,19 +246,13 @@ static int ux500_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err1;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err1;
-	}
-
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
@@ -276,26 +270,23 @@ static int ux500_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err1;
 	}
 
 	return 0;
 
-err2:
-	clk_disable_unprepare(clk);
-
 err1:
 	platform_device_put(musb);
 
@@ -308,7 +299,6 @@ static void ux500_remove(struct platform_device *pdev)
 	struct ux500_glue	*glue = platform_get_drvdata(pdev);
 
 	platform_device_unregister(glue->musb);
-	clk_disable_unprepare(glue->clk);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.34.1

[PATCH v1 5/5] usb: ux500: Use devm_clk_get_enabled() helpers

[Lei Liu]

The devm_clk_get_enabled() helpers:
    - call devm_clk_get()
    - call clk_prepare_enable() and register what is needed in order to
     call clk_disable_unprepare() when needed, as a managed resource.

This simplifies the code and avoids calls to clk_disable_unprepare().

---
v0 -> v1
Incorrect usage of clk_prepare_enable() should be corrected to 
devm_clk_get_enabled().

Signed-off-by: Lei Liu <liulei.rjpt@vivo.com>
---
 drivers/usb/musb/ux500.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index c8d9d2a1d2f0..51ce67678c0c 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -246,19 +246,13 @@ static int ux500_probe(struct platform_device *pdev)
 		goto err0;
 	}
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "failed to get clock\n");
 		ret = PTR_ERR(clk);
 		goto err1;
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to enable clock\n");
-		goto err1;
-	}
-
 	musb->dev.parent		= &pdev->dev;
 	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
@@ -276,26 +270,23 @@ static int ux500_probe(struct platform_device *pdev)
 	ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add resources\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add platform_data\n");
-		goto err2;
+		goto err1;
 	}
 
 	ret = platform_device_add(musb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register musb device\n");
-		goto err2;
+		goto err1;
 	}
 
 	return 0;
 
-err2:
-	clk_disable_unprepare(clk);
-
 err1:
 	platform_device_put(musb);
 
@@ -308,7 +299,6 @@ static void ux500_remove(struct platform_device *pdev)
 	struct ux500_glue	*glue = platform_get_drvdata(pdev);
 
 	platform_device_unregister(glue->musb);
-	clk_disable_unprepare(glue->clk);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids calls to clk_disable_unprepare().
> 
> ---
> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
> certain interfaces due to the lack of synchronization during the 
> commit updates. These issues have been corrected in the v1 version.
> 
> version 1 changes
> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>   devm_clk_get_enabled().
> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>   devm_clk_get_enabled().
> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>   corrected to devm_clk_get_enabled().

Patch versions start at 1, this should be 2, right?

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids calls to clk_disable_unprepare().
> 
> ---
> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
> certain interfaces due to the lack of synchronization during the 
> commit updates. These issues have been corrected in the v1 version.
> 
> version 1 changes
> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>   devm_clk_get_enabled().
> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>   devm_clk_get_enabled().
> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>   corrected to devm_clk_get_enabled().

Patch versions start at 1, this should be 2, right?

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> The devm_clk_get_enabled() helpers:
>     - call devm_clk_get()
>     - call clk_prepare_enable() and register what is needed in order to
>      call clk_disable_unprepare() when needed, as a managed resource.
> 
> This simplifies the code and avoids calls to clk_disable_unprepare().
> 
> ---
> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of 
> certain interfaces due to the lack of synchronization during the 
> commit updates. These issues have been corrected in the v1 version.
> 
> version 1 changes
> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>   devm_clk_get_enabled().
> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>   devm_clk_get_enabled().
> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>   corrected to devm_clk_get_enabled().

Patch versions start at 1, this should be 2, right?


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
>> The devm_clk_get_enabled() helpers:
>>      - call devm_clk_get()
>>      - call clk_prepare_enable() and register what is needed in order to
>>       call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code and avoids calls to clk_disable_unprepare().
>>
>> ---
>> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
>> certain interfaces due to the lack of synchronization during the
>> commit updates. These issues have been corrected in the v1 version.
>>
>> version 1 changes
>> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>>    corrected to devm_clk_get_enabled().
> Patch versions start at 1, this should be 2, right?

Hi?Do I need to update the patch from v1 to v2 again?

Lei Liu


>

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
>> The devm_clk_get_enabled() helpers:
>>      - call devm_clk_get()
>>      - call clk_prepare_enable() and register what is needed in order to
>>       call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code and avoids calls to clk_disable_unprepare().
>>
>> ---
>> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
>> certain interfaces due to the lack of synchronization during the
>> commit updates. These issues have been corrected in the v1 version.
>>
>> version 1 changes
>> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>>    corrected to devm_clk_get_enabled().
> Patch versions start at 1, this should be 2, right?

Hi，Do I need to update the patch from v1 to v2 again?

Lei Liu


>

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Lei Liu]

on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
>> The devm_clk_get_enabled() helpers:
>>      - call devm_clk_get()
>>      - call clk_prepare_enable() and register what is needed in order to
>>       call clk_disable_unprepare() when needed, as a managed resource.
>>
>> This simplifies the code and avoids calls to clk_disable_unprepare().
>>
>> ---
>> The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
>> certain interfaces due to the lack of synchronization during the
>> commit updates. These issues have been corrected in the v1 version.
>>
>> version 1 changes
>> 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
>>    devm_clk_get_enabled().
>> 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
>>    corrected to devm_clk_get_enabled().
> Patch versions start at 1, this should be 2, right?

Hi，Do I need to update the patch from v1 to v2 again?

Lei Liu


>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

[PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:46:10PM +0800, Lei Liu wrote:
> 
> on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> > On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> > > The devm_clk_get_enabled() helpers:
> > >      - call devm_clk_get()
> > >      - call clk_prepare_enable() and register what is needed in order to
> > >       call clk_disable_unprepare() when needed, as a managed resource.
> > > 
> > > This simplifies the code and avoids calls to clk_disable_unprepare().
> > > 
> > > ---
> > > The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
> > > certain interfaces due to the lack of synchronization during the
> > > commit updates. These issues have been corrected in the v1 version.
> > > 
> > > version 1 changes
> > > 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
> > >    corrected to devm_clk_get_enabled().
> > Patch versions start at 1, this should be 2, right?
> 
> Hi?Do I need to update the patch from v1 to v2 again?

Yes please, otherwise our tools will get confused.

greg k-h

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:46:10PM +0800, Lei Liu wrote:
> 
> on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> > On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> > > The devm_clk_get_enabled() helpers:
> > >      - call devm_clk_get()
> > >      - call clk_prepare_enable() and register what is needed in order to
> > >       call clk_disable_unprepare() when needed, as a managed resource.
> > > 
> > > This simplifies the code and avoids calls to clk_disable_unprepare().
> > > 
> > > ---
> > > The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
> > > certain interfaces due to the lack of synchronization during the
> > > commit updates. These issues have been corrected in the v1 version.
> > > 
> > > version 1 changes
> > > 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
> > >    corrected to devm_clk_get_enabled().
> > Patch versions start at 1, this should be 2, right?
> 
> Hi，Do I need to update the patch from v1 to v2 again?

Yes please, otherwise our tools will get confused.

greg k-h

Re: [PATCH v1 0/5] usb drivers use devm_clk_get_enabled() helpers

[Greg Kroah-Hartman]

On Thu, Aug 22, 2024 at 12:46:10PM +0800, Lei Liu wrote:
> 
> on 2024/8/22 12:27, Greg Kroah-Hartman wrote:
> > On Thu, Aug 22, 2024 at 12:07:25PM +0800, Lei Liu wrote:
> > > The devm_clk_get_enabled() helpers:
> > >      - call devm_clk_get()
> > >      - call clk_prepare_enable() and register what is needed in order to
> > >       call clk_disable_unprepare() when needed, as a managed resource.
> > > 
> > > This simplifies the code and avoids calls to clk_disable_unprepare().
> > > 
> > > ---
> > > The files ux500.c, mpfs.c, and pxa27x_udc.c have incorrect usage of
> > > certain interfaces due to the lack of synchronization during the
> > > commit updates. These issues have been corrected in the v1 version.
> > > 
> > > version 1 changes
> > > 1.ux500: Incorrect usage of clk_prepare_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 2.mpfs: Incorrect usage of devm_clk_get_enable() should be corrected to
> > >    devm_clk_get_enabled().
> > > 3.pxa27x_udc: Incorrect usage of clk_prepare_enable() should be
> > >    corrected to devm_clk_get_enabled().
> > Patch versions start at 1, this should be 2, right?
> 
> Hi，Do I need to update the patch from v1 to v2 again?

Yes please, otherwise our tools will get confused.

greg k-h

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv