* [PATCH v3 0/7] Support SDHCI and eMMC for ast2700
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
change from v1:
This patch series do not support boot from an eMMC.
Only support eMMC and SD Slot 0 as storages.
change from v2:
- Add hw/sd/aspeed_sdhci: Fix coding style patch
change from v3:
- Directly set capareg and sd_spec_version instead of property
- Keep DEFINE_TYPES
Jamin Lin (7):
hw/sd/aspeed_sdhci: Fix coding style
hw/arm/aspeed: Fix coding style
hw:sdhci: Introduce a new "capareg" class member to set the different
Capability Registers
hw:sdhci: Directly set sd_spec_version instead of property
hw/sd/aspeed_sdhci: Add AST2700 Support
aspeed/soc: Support SDHCI for AST2700
aspeed/soc: Support eMMC for AST2700
hw/arm/aspeed_ast2400.c | 3 +-
hw/arm/aspeed_ast2600.c | 10 ++---
hw/arm/aspeed_ast27x0.c | 35 +++++++++++++++++
hw/sd/aspeed_sdhci.c | 76 ++++++++++++++++++++++++++++++------
include/hw/sd/aspeed_sdhci.h | 13 +++++-
5 files changed, 118 insertions(+), 19 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 22+ messages in thread* [PATCH v3 1/7] hw/sd/aspeed_sdhci: Fix coding style
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Fix coding style issues from checkpatch.pl.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/sd/aspeed_sdhci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index 98d5460905..acd6538261 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -87,10 +87,12 @@ static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val,
sdhci->regs[TO_REG(addr)] = (uint32_t)val & ~ASPEED_SDHCI_INFO_RESET;
break;
case ASPEED_SDHCI_SDIO_140:
- sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 0, 32, val);
+ sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
+ 0, 32, val);
break;
case ASPEED_SDHCI_SDIO_144:
- sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 32, 32, val);
+ sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
+ 32, 32, val);
break;
case ASPEED_SDHCI_SDIO_148:
sdhci->slots[0].maxcurr = deposit64(sdhci->slots[0].maxcurr,
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 1/7] hw/sd/aspeed_sdhci: Fix coding style
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Fix coding style issues from checkpatch.pl.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/sd/aspeed_sdhci.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index 98d5460905..acd6538261 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -87,10 +87,12 @@ static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val,
sdhci->regs[TO_REG(addr)] = (uint32_t)val & ~ASPEED_SDHCI_INFO_RESET;
break;
case ASPEED_SDHCI_SDIO_140:
- sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 0, 32, val);
+ sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
+ 0, 32, val);
break;
case ASPEED_SDHCI_SDIO_144:
- sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 32, 32, val);
+ sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
+ 32, 32, val);
break;
case ASPEED_SDHCI_SDIO_148:
sdhci->slots[0].maxcurr = deposit64(sdhci->slots[0].maxcurr,
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 1/7] hw/sd/aspeed_sdhci: Fix coding style
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:13 ` Cédric Le Goater
-1 siblings, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:13 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Fix coding style issues from checkpatch.pl.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/sd/aspeed_sdhci.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
> index 98d5460905..acd6538261 100644
> --- a/hw/sd/aspeed_sdhci.c
> +++ b/hw/sd/aspeed_sdhci.c
> @@ -87,10 +87,12 @@ static void aspeed_sdhci_write(void *opaque, hwaddr addr, uint64_t val,
> sdhci->regs[TO_REG(addr)] = (uint32_t)val & ~ASPEED_SDHCI_INFO_RESET;
> break;
> case ASPEED_SDHCI_SDIO_140:
> - sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 0, 32, val);
> + sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
> + 0, 32, val);
> break;
> case ASPEED_SDHCI_SDIO_144:
> - sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg, 32, 32, val);
> + sdhci->slots[0].capareg = deposit64(sdhci->slots[0].capareg,
> + 32, 32, val);
> break;
> case ASPEED_SDHCI_SDIO_148:
> sdhci->slots[0].maxcurr = deposit64(sdhci->slots[0].maxcurr,
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 2/7] hw/arm/aspeed: Fix coding style
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Fix coding style issues from checkpatch.pl.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast2600.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index be3eb70cdd..c40d3d8443 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -541,7 +541,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
return;
}
- aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_DEV_GPIO]);
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0,
+ sc->memmap[ASPEED_DEV_GPIO]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 2/7] hw/arm/aspeed: Fix coding style
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Fix coding style issues from checkpatch.pl.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast2600.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index be3eb70cdd..c40d3d8443 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -541,7 +541,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
return;
}
- aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_DEV_GPIO]);
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0,
+ sc->memmap[ASPEED_DEV_GPIO]);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 2/7] hw/arm/aspeed: Fix coding style
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:14 ` Cédric Le Goater
-1 siblings, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:14 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Fix coding style issues from checkpatch.pl.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/arm/aspeed_ast2600.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index be3eb70cdd..c40d3d8443 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -541,7 +541,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
> if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
> return;
> }
> - aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0, sc->memmap[ASPEED_DEV_GPIO]);
> + aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->gpio), 0,
> + sc->memmap[ASPEED_DEV_GPIO]);
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), 0,
> aspeed_soc_get_irq(s, ASPEED_DEV_GPIO));
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 3/7] hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Currently, it set the hardcode value of capability registers to all ASPEED SOCs
However, the value of capability registers should be different for all ASPEED
SOCs. For example: the bit 28 of the Capability Register 1 should be 1 for
64-bits System Bus support for AST2700.
Introduce a new "capareg" class member whose data type is uint_64 to set the
different Capability Registers to all ASPEED SOCs.
The value of Capability Register is "0x0000000001e80080" for AST2400 and
AST2500. The value of Capability Register is "0x0000000701f80080" for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast2400.c | 3 ++-
hw/arm/aspeed_ast2600.c | 7 +++--
hw/sd/aspeed_sdhci.c | 52 +++++++++++++++++++++++++++++++++---
include/hw/sd/aspeed_sdhci.h | 12 +++++++--
4 files changed, 63 insertions(+), 11 deletions(-)
diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c
index ecc81ecc79..3c1b419945 100644
--- a/hw/arm/aspeed_ast2400.c
+++ b/hw/arm/aspeed_ast2400.c
@@ -224,7 +224,8 @@ static void aspeed_ast2400_soc_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
object_initialize_child(obj, "gpio", &s->gpio, typename);
- object_initialize_child(obj, "sdc", &s->sdhci, TYPE_ASPEED_SDHCI);
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sdc", &s->sdhci, typename);
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index c40d3d8443..b5703bd064 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -236,8 +236,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname);
object_initialize_child(obj, "gpio_1_8v", &s->gpio_1_8v, typename);
- object_initialize_child(obj, "sd-controller", &s->sdhci,
- TYPE_ASPEED_SDHCI);
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
@@ -247,8 +247,7 @@ static void aspeed_soc_ast2600_init(Object *obj)
&s->sdhci.slots[i], TYPE_SYSBUS_SDHCI);
}
- object_initialize_child(obj, "emmc-controller", &s->emmc,
- TYPE_ASPEED_SDHCI);
+ object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index acd6538261..ccaeefa75b 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -148,6 +148,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_GET_CLASS(sdhci);
/* Create input irqs for the slots */
qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
@@ -166,10 +167,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
return;
}
- if (!object_property_set_uint(sdhci_slot, "capareg",
- ASPEED_SDHCI_CAPABILITIES, errp)) {
- return;
- }
+ sdhci->slots[i].capareg = asc->capareg;
if (!sysbus_realize(sbd_slot, errp)) {
return;
@@ -218,13 +216,59 @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
device_class_set_props(dc, aspeed_sdhci_properties);
}
+static void aspeed_2400_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2400 SDHCI Controller";
+ asc->capareg = 0x0000000001e80080;
+}
+
+static void aspeed_2500_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2500 SDHCI Controller";
+ asc->capareg = 0x0000000001e80080;
+}
+
+static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2600 SDHCI Controller";
+ asc->capareg = 0x0000000701f80080;
+}
+
static const TypeInfo aspeed_sdhci_types[] = {
{
.name = TYPE_ASPEED_SDHCI,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedSDHCIState),
.class_init = aspeed_sdhci_class_init,
+ .class_size = sizeof(AspeedSDHCIClass),
+ .abstract = true,
+ },
+ {
+ .name = TYPE_ASPEED_2400_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2400_sdhci_class_init,
+ },
+ {
+ .name = TYPE_ASPEED_2500_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2500_sdhci_class_init,
+ },
+ {
+ .name = TYPE_ASPEED_2600_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2600_sdhci_class_init,
},
};
DEFINE_TYPES(aspeed_sdhci_types)
+
+
diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
index 057bc5f3d1..8083797e25 100644
--- a/include/hw/sd/aspeed_sdhci.h
+++ b/include/hw/sd/aspeed_sdhci.h
@@ -13,9 +13,11 @@
#include "qom/object.h"
#define TYPE_ASPEED_SDHCI "aspeed.sdhci"
-OBJECT_DECLARE_SIMPLE_TYPE(AspeedSDHCIState, ASPEED_SDHCI)
+#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
+#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
+#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
+OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
-#define ASPEED_SDHCI_CAPABILITIES 0x01E80080
#define ASPEED_SDHCI_NUM_SLOTS 2
#define ASPEED_SDHCI_NUM_REGS (ASPEED_SDHCI_REG_SIZE / sizeof(uint32_t))
#define ASPEED_SDHCI_REG_SIZE 0x100
@@ -32,4 +34,10 @@ struct AspeedSDHCIState {
uint32_t regs[ASPEED_SDHCI_NUM_REGS];
};
+struct AspeedSDHCIClass {
+ SysBusDeviceClass parent_class;
+
+ uint64_t capareg;
+};
+
#endif /* ASPEED_SDHCI_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 3/7] hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Currently, it set the hardcode value of capability registers to all ASPEED SOCs
However, the value of capability registers should be different for all ASPEED
SOCs. For example: the bit 28 of the Capability Register 1 should be 1 for
64-bits System Bus support for AST2700.
Introduce a new "capareg" class member whose data type is uint_64 to set the
different Capability Registers to all ASPEED SOCs.
The value of Capability Register is "0x0000000001e80080" for AST2400 and
AST2500. The value of Capability Register is "0x0000000701f80080" for AST2600.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast2400.c | 3 ++-
hw/arm/aspeed_ast2600.c | 7 +++--
hw/sd/aspeed_sdhci.c | 52 +++++++++++++++++++++++++++++++++---
include/hw/sd/aspeed_sdhci.h | 12 +++++++--
4 files changed, 63 insertions(+), 11 deletions(-)
diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c
index ecc81ecc79..3c1b419945 100644
--- a/hw/arm/aspeed_ast2400.c
+++ b/hw/arm/aspeed_ast2400.c
@@ -224,7 +224,8 @@ static void aspeed_ast2400_soc_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
object_initialize_child(obj, "gpio", &s->gpio, typename);
- object_initialize_child(obj, "sdc", &s->sdhci, TYPE_ASPEED_SDHCI);
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sdc", &s->sdhci, typename);
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index c40d3d8443..b5703bd064 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -236,8 +236,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname);
object_initialize_child(obj, "gpio_1_8v", &s->gpio_1_8v, typename);
- object_initialize_child(obj, "sd-controller", &s->sdhci,
- TYPE_ASPEED_SDHCI);
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
@@ -247,8 +247,7 @@ static void aspeed_soc_ast2600_init(Object *obj)
&s->sdhci.slots[i], TYPE_SYSBUS_SDHCI);
}
- object_initialize_child(obj, "emmc-controller", &s->emmc,
- TYPE_ASPEED_SDHCI);
+ object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index acd6538261..ccaeefa75b 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -148,6 +148,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_GET_CLASS(sdhci);
/* Create input irqs for the slots */
qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
@@ -166,10 +167,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
return;
}
- if (!object_property_set_uint(sdhci_slot, "capareg",
- ASPEED_SDHCI_CAPABILITIES, errp)) {
- return;
- }
+ sdhci->slots[i].capareg = asc->capareg;
if (!sysbus_realize(sbd_slot, errp)) {
return;
@@ -218,13 +216,59 @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
device_class_set_props(dc, aspeed_sdhci_properties);
}
+static void aspeed_2400_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2400 SDHCI Controller";
+ asc->capareg = 0x0000000001e80080;
+}
+
+static void aspeed_2500_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2500 SDHCI Controller";
+ asc->capareg = 0x0000000001e80080;
+}
+
+static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2600 SDHCI Controller";
+ asc->capareg = 0x0000000701f80080;
+}
+
static const TypeInfo aspeed_sdhci_types[] = {
{
.name = TYPE_ASPEED_SDHCI,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedSDHCIState),
.class_init = aspeed_sdhci_class_init,
+ .class_size = sizeof(AspeedSDHCIClass),
+ .abstract = true,
+ },
+ {
+ .name = TYPE_ASPEED_2400_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2400_sdhci_class_init,
+ },
+ {
+ .name = TYPE_ASPEED_2500_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2500_sdhci_class_init,
+ },
+ {
+ .name = TYPE_ASPEED_2600_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2600_sdhci_class_init,
},
};
DEFINE_TYPES(aspeed_sdhci_types)
+
+
diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
index 057bc5f3d1..8083797e25 100644
--- a/include/hw/sd/aspeed_sdhci.h
+++ b/include/hw/sd/aspeed_sdhci.h
@@ -13,9 +13,11 @@
#include "qom/object.h"
#define TYPE_ASPEED_SDHCI "aspeed.sdhci"
-OBJECT_DECLARE_SIMPLE_TYPE(AspeedSDHCIState, ASPEED_SDHCI)
+#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
+#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
+#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
+OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
-#define ASPEED_SDHCI_CAPABILITIES 0x01E80080
#define ASPEED_SDHCI_NUM_SLOTS 2
#define ASPEED_SDHCI_NUM_REGS (ASPEED_SDHCI_REG_SIZE / sizeof(uint32_t))
#define ASPEED_SDHCI_REG_SIZE 0x100
@@ -32,4 +34,10 @@ struct AspeedSDHCIState {
uint32_t regs[ASPEED_SDHCI_NUM_REGS];
};
+struct AspeedSDHCIClass {
+ SysBusDeviceClass parent_class;
+
+ uint64_t capareg;
+};
+
#endif /* ASPEED_SDHCI_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 3/7] hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:15 ` Cédric Le Goater
2024-12-04 8:35 ` Jamin Lin
-1 siblings, 1 reply; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:15 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Currently, it set the hardcode value of capability registers to all ASPEED SOCs
> However, the value of capability registers should be different for all ASPEED
> SOCs. For example: the bit 28 of the Capability Register 1 should be 1 for
> 64-bits System Bus support for AST2700.
>
> Introduce a new "capareg" class member whose data type is uint_64 to set the
> different Capability Registers to all ASPEED SOCs.
>
> The value of Capability Register is "0x0000000001e80080" for AST2400 and
> AST2500. The value of Capability Register is "0x0000000701f80080" for AST2600.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> ---
> hw/arm/aspeed_ast2400.c | 3 ++-
> hw/arm/aspeed_ast2600.c | 7 +++--
> hw/sd/aspeed_sdhci.c | 52 +++++++++++++++++++++++++++++++++---
> include/hw/sd/aspeed_sdhci.h | 12 +++++++--
> 4 files changed, 63 insertions(+), 11 deletions(-)
>
> diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c
> index ecc81ecc79..3c1b419945 100644
> --- a/hw/arm/aspeed_ast2400.c
> +++ b/hw/arm/aspeed_ast2400.c
> @@ -224,7 +224,8 @@ static void aspeed_ast2400_soc_init(Object *obj)
> snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
> object_initialize_child(obj, "gpio", &s->gpio, typename);
>
> - object_initialize_child(obj, "sdc", &s->sdhci, TYPE_ASPEED_SDHCI);
> + snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
> + object_initialize_child(obj, "sdc", &s->sdhci, typename);
>
> object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
>
> diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
> index c40d3d8443..b5703bd064 100644
> --- a/hw/arm/aspeed_ast2600.c
> +++ b/hw/arm/aspeed_ast2600.c
> @@ -236,8 +236,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
> snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v", socname);
> object_initialize_child(obj, "gpio_1_8v", &s->gpio_1_8v, typename);
>
> - object_initialize_child(obj, "sd-controller", &s->sdhci,
> - TYPE_ASPEED_SDHCI);
> + snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
> + object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
>
> object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2, &error_abort);
>
> @@ -247,8 +247,7 @@ static void aspeed_soc_ast2600_init(Object *obj)
> &s->sdhci.slots[i], TYPE_SYSBUS_SDHCI);
> }
>
> - object_initialize_child(obj, "emmc-controller", &s->emmc,
> - TYPE_ASPEED_SDHCI);
> + object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
>
> object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
>
> diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
> index acd6538261..ccaeefa75b 100644
> --- a/hw/sd/aspeed_sdhci.c
> +++ b/hw/sd/aspeed_sdhci.c
> @@ -148,6 +148,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
> {
> SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
> + AspeedSDHCIClass *asc = ASPEED_SDHCI_GET_CLASS(sdhci);
>
> /* Create input irqs for the slots */
> qdev_init_gpio_in_named_with_opaque(DEVICE(sbd), aspeed_sdhci_set_irq,
> @@ -166,10 +167,7 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
> return;
> }
>
> - if (!object_property_set_uint(sdhci_slot, "capareg",
> - ASPEED_SDHCI_CAPABILITIES, errp)) {
> - return;
> - }
> + sdhci->slots[i].capareg = asc->capareg;
I think we want to keep :
if (!object_property_set_uint(sdhci_slot, "capareg",
asc->capareg, errp)) {
return;
}
Thanks,
C.
>
> if (!sysbus_realize(sbd_slot, errp)) {
> return;
> @@ -218,13 +216,59 @@ static void aspeed_sdhci_class_init(ObjectClass *classp, void *data)
> device_class_set_props(dc, aspeed_sdhci_properties);
> }
>
> +static void aspeed_2400_sdhci_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> +
> + dc->desc = "ASPEED 2400 SDHCI Controller";
> + asc->capareg = 0x0000000001e80080;
> +}
> +
> +static void aspeed_2500_sdhci_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> +
> + dc->desc = "ASPEED 2500 SDHCI Controller";
> + asc->capareg = 0x0000000001e80080;
> +}
> +
> +static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> +
> + dc->desc = "ASPEED 2600 SDHCI Controller";
> + asc->capareg = 0x0000000701f80080;
> +}
> +
> static const TypeInfo aspeed_sdhci_types[] = {
> {
> .name = TYPE_ASPEED_SDHCI,
> .parent = TYPE_SYS_BUS_DEVICE,
> .instance_size = sizeof(AspeedSDHCIState),
> .class_init = aspeed_sdhci_class_init,
> + .class_size = sizeof(AspeedSDHCIClass),
> + .abstract = true,
> + },
> + {
> + .name = TYPE_ASPEED_2400_SDHCI,
> + .parent = TYPE_ASPEED_SDHCI,
> + .class_init = aspeed_2400_sdhci_class_init,
> + },
> + {
> + .name = TYPE_ASPEED_2500_SDHCI,
> + .parent = TYPE_ASPEED_SDHCI,
> + .class_init = aspeed_2500_sdhci_class_init,
> + },
> + {
> + .name = TYPE_ASPEED_2600_SDHCI,
> + .parent = TYPE_ASPEED_SDHCI,
> + .class_init = aspeed_2600_sdhci_class_init,
> },
> };
>
> DEFINE_TYPES(aspeed_sdhci_types)
> +
> +
Drop the extra lines please.
Thanks,
C.
> diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
> index 057bc5f3d1..8083797e25 100644
> --- a/include/hw/sd/aspeed_sdhci.h
> +++ b/include/hw/sd/aspeed_sdhci.h
> @@ -13,9 +13,11 @@
> #include "qom/object.h"
>
> #define TYPE_ASPEED_SDHCI "aspeed.sdhci"
> -OBJECT_DECLARE_SIMPLE_TYPE(AspeedSDHCIState, ASPEED_SDHCI)
> +#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
> +#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
> +#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
> +OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
>
> -#define ASPEED_SDHCI_CAPABILITIES 0x01E80080
> #define ASPEED_SDHCI_NUM_SLOTS 2
> #define ASPEED_SDHCI_NUM_REGS (ASPEED_SDHCI_REG_SIZE / sizeof(uint32_t))
> #define ASPEED_SDHCI_REG_SIZE 0x100
> @@ -32,4 +34,10 @@ struct AspeedSDHCIState {
> uint32_t regs[ASPEED_SDHCI_NUM_REGS];
> };
>
> +struct AspeedSDHCIClass {
> + SysBusDeviceClass parent_class;
> +
> + uint64_t capareg;
> +};
> +
> #endif /* ASPEED_SDHCI_H */
^ permalink raw reply [flat|nested] 22+ messages in thread* RE: [PATCH v3 3/7] hw:sdhci: Introduce a new "capareg" class member to set the different Capability Registers
2024-12-04 8:15 ` Cédric Le Goater
@ 2024-12-04 8:35 ` Jamin Lin
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin @ 2024-12-04 8:35 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: Troy Lee, Yunlin Tang
Hi Cedric,
> Subject: Re: [PATCH v3 3/7] hw:sdhci: Introduce a new "capareg" class member
> to set the different Capability Registers
>
> On 12/4/24 09:05, Jamin Lin wrote:
> > Currently, it set the hardcode value of capability registers to all
> > ASPEED SOCs However, the value of capability registers should be
> > different for all ASPEED SOCs. For example: the bit 28 of the
> > Capability Register 1 should be 1 for 64-bits System Bus support for AST2700.
> >
> > Introduce a new "capareg" class member whose data type is uint_64 to
> > set the different Capability Registers to all ASPEED SOCs.
> >
> > The value of Capability Register is "0x0000000001e80080" for AST2400
> > and AST2500. The value of Capability Register is "0x0000000701f80080" for
> AST2600.
> >
> > Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
> > ---
> > hw/arm/aspeed_ast2400.c | 3 ++-
> > hw/arm/aspeed_ast2600.c | 7 +++--
> > hw/sd/aspeed_sdhci.c | 52
> +++++++++++++++++++++++++++++++++---
> > include/hw/sd/aspeed_sdhci.h | 12 +++++++--
> > 4 files changed, 63 insertions(+), 11 deletions(-)
> >
> > diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c index
> > ecc81ecc79..3c1b419945 100644
> > --- a/hw/arm/aspeed_ast2400.c
> > +++ b/hw/arm/aspeed_ast2400.c
> > @@ -224,7 +224,8 @@ static void aspeed_ast2400_soc_init(Object *obj)
> > snprintf(typename, sizeof(typename), "aspeed.gpio-%s", socname);
> > object_initialize_child(obj, "gpio", &s->gpio, typename);
> >
> > - object_initialize_child(obj, "sdc", &s->sdhci, TYPE_ASPEED_SDHCI);
> > + snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
> > + object_initialize_child(obj, "sdc", &s->sdhci, typename);
> >
> > object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2,
> > &error_abort);
> >
> > diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index
> > c40d3d8443..b5703bd064 100644
> > --- a/hw/arm/aspeed_ast2600.c
> > +++ b/hw/arm/aspeed_ast2600.c
> > @@ -236,8 +236,8 @@ static void aspeed_soc_ast2600_init(Object *obj)
> > snprintf(typename, sizeof(typename), "aspeed.gpio-%s-1_8v",
> socname);
> > object_initialize_child(obj, "gpio_1_8v", &s->gpio_1_8v,
> > typename);
> >
> > - object_initialize_child(obj, "sd-controller", &s->sdhci,
> > - TYPE_ASPEED_SDHCI);
> > + snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
> > + object_initialize_child(obj, "sd-controller", &s->sdhci,
> > + typename);
> >
> > object_property_set_int(OBJECT(&s->sdhci), "num-slots", 2,
> > &error_abort);
> >
> > @@ -247,8 +247,7 @@ static void aspeed_soc_ast2600_init(Object *obj)
> > &s->sdhci.slots[i],
> TYPE_SYSBUS_SDHCI);
> > }
> >
> > - object_initialize_child(obj, "emmc-controller", &s->emmc,
> > - TYPE_ASPEED_SDHCI);
> > + object_initialize_child(obj, "emmc-controller", &s->emmc,
> > + typename);
> >
> > object_property_set_int(OBJECT(&s->emmc), "num-slots", 1,
> > &error_abort);
> >
> > diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c index
> > acd6538261..ccaeefa75b 100644
> > --- a/hw/sd/aspeed_sdhci.c
> > +++ b/hw/sd/aspeed_sdhci.c
> > @@ -148,6 +148,7 @@ static void aspeed_sdhci_realize(DeviceState *dev,
> Error **errp)
> > {
> > SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
> > AspeedSDHCIState *sdhci = ASPEED_SDHCI(dev);
> > + AspeedSDHCIClass *asc = ASPEED_SDHCI_GET_CLASS(sdhci);
> >
> > /* Create input irqs for the slots */
> > qdev_init_gpio_in_named_with_opaque(DEVICE(sbd),
> > aspeed_sdhci_set_irq, @@ -166,10 +167,7 @@ static void
> aspeed_sdhci_realize(DeviceState *dev, Error **errp)
> > return;
> > }
> >
> > - if (!object_property_set_uint(sdhci_slot, "capareg",
> > - ASPEED_SDHCI_CAPABILITIES,
> errp)) {
> > - return;
> > - }
> > + sdhci->slots[i].capareg = asc->capareg;
>
> I think we want to keep :
>
> if (!object_property_set_uint(sdhci_slot, "capareg",
> asc->capareg, errp)) {
> return;
> }
>
>
Got it. Thanks
> Thanks,
>
> C.
>
>
> >
> > if (!sysbus_realize(sbd_slot, errp)) {
> > return;
> > @@ -218,13 +216,59 @@ static void aspeed_sdhci_class_init(ObjectClass
> *classp, void *data)
> > device_class_set_props(dc, aspeed_sdhci_properties);
> > }
> >
> > +static void aspeed_2400_sdhci_class_init(ObjectClass *klass, void
> > +*data) {
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> > +
> > + dc->desc = "ASPEED 2400 SDHCI Controller";
> > + asc->capareg = 0x0000000001e80080; }
> > +
> > +static void aspeed_2500_sdhci_class_init(ObjectClass *klass, void
> > +*data) {
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> > +
> > + dc->desc = "ASPEED 2500 SDHCI Controller";
> > + asc->capareg = 0x0000000001e80080; }
> > +
> > +static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void
> > +*data) {
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> > +
> > + dc->desc = "ASPEED 2600 SDHCI Controller";
> > + asc->capareg = 0x0000000701f80080; }
> > +
> > static const TypeInfo aspeed_sdhci_types[] = {
> > {
> > .name = TYPE_ASPEED_SDHCI,
> > .parent = TYPE_SYS_BUS_DEVICE,
> > .instance_size = sizeof(AspeedSDHCIState),
> > .class_init = aspeed_sdhci_class_init,
> > + .class_size = sizeof(AspeedSDHCIClass),
> > + .abstract = true,
> > + },
> > + {
> > + .name = TYPE_ASPEED_2400_SDHCI,
> > + .parent = TYPE_ASPEED_SDHCI,
> > + .class_init = aspeed_2400_sdhci_class_init,
> > + },
> > + {
> > + .name = TYPE_ASPEED_2500_SDHCI,
> > + .parent = TYPE_ASPEED_SDHCI,
> > + .class_init = aspeed_2500_sdhci_class_init,
> > + },
> > + {
> > + .name = TYPE_ASPEED_2600_SDHCI,
> > + .parent = TYPE_ASPEED_SDHCI,
> > + .class_init = aspeed_2600_sdhci_class_init,
> > },
> > };
> >
> > DEFINE_TYPES(aspeed_sdhci_types)
> > +
> > +
>
> Drop the extra lines please.
>
>
> Thanks,
>
> C.
>
>
>
> > diff --git a/include/hw/sd/aspeed_sdhci.h
> > b/include/hw/sd/aspeed_sdhci.h index 057bc5f3d1..8083797e25 100644
> > --- a/include/hw/sd/aspeed_sdhci.h
> > +++ b/include/hw/sd/aspeed_sdhci.h
> > @@ -13,9 +13,11 @@
> > #include "qom/object.h"
> >
> > #define TYPE_ASPEED_SDHCI "aspeed.sdhci"
> > -OBJECT_DECLARE_SIMPLE_TYPE(AspeedSDHCIState, ASPEED_SDHCI)
> > +#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
> > +#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
> > +#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
> > +OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass,
> ASPEED_SDHCI)
> >
> > -#define ASPEED_SDHCI_CAPABILITIES 0x01E80080
> > #define ASPEED_SDHCI_NUM_SLOTS 2
> > #define ASPEED_SDHCI_NUM_REGS (ASPEED_SDHCI_REG_SIZE /
> sizeof(uint32_t))
> > #define ASPEED_SDHCI_REG_SIZE 0x100
> > @@ -32,4 +34,10 @@ struct AspeedSDHCIState {
> > uint32_t regs[ASPEED_SDHCI_NUM_REGS];
> > };
> >
> > +struct AspeedSDHCIClass {
> > + SysBusDeviceClass parent_class;
> > +
> > + uint64_t capareg;
> > +};
> > +
> > #endif /* ASPEED_SDHCI_H */
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 4/7] hw:sdhci: Directly set sd_spec_version instead of property
2024-12-04 8:05 ` Jamin Lin via
` (3 preceding siblings ...)
(?)
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Directly set sd_spec_version instead of property and remove
unused local variable.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/sd/aspeed_sdhci.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index ccaeefa75b..4e64e2537a 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -160,13 +160,9 @@ static void aspeed_sdhci_realize(DeviceState *dev, Error **errp)
sysbus_init_mmio(sbd, &sdhci->iomem);
for (int i = 0; i < sdhci->num_slots; ++i) {
- Object *sdhci_slot = OBJECT(&sdhci->slots[i]);
SysBusDevice *sbd_slot = SYS_BUS_DEVICE(&sdhci->slots[i]);
- if (!object_property_set_int(sdhci_slot, "sd-spec-version", 2, errp)) {
- return;
- }
-
+ sdhci->slots[i].sd_spec_version = 2;
sdhci->slots[i].capareg = asc->capareg;
if (!sysbus_realize(sbd_slot, errp)) {
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 5/7] hw/sd/aspeed_sdhci: Add AST2700 Support
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
init function and set the value of capability register to "0x0000000719f80080".
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/sd/aspeed_sdhci.c | 16 ++++++++++++++--
include/hw/sd/aspeed_sdhci.h | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index 4e64e2537a..de92f84111 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -239,6 +239,15 @@ static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
asc->capareg = 0x0000000701f80080;
}
+static void aspeed_2700_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 SDHCI Controller";
+ asc->capareg = 0x0000000719f80080;
+}
+
static const TypeInfo aspeed_sdhci_types[] = {
{
.name = TYPE_ASPEED_SDHCI,
@@ -263,8 +272,11 @@ static const TypeInfo aspeed_sdhci_types[] = {
.parent = TYPE_ASPEED_SDHCI,
.class_init = aspeed_2600_sdhci_class_init,
},
+ {
+ .name = TYPE_ASPEED_2700_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2700_sdhci_class_init,
+ },
};
DEFINE_TYPES(aspeed_sdhci_types)
-
-
diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
index 8083797e25..4ef1770471 100644
--- a/include/hw/sd/aspeed_sdhci.h
+++ b/include/hw/sd/aspeed_sdhci.h
@@ -16,6 +16,7 @@
#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
+#define TYPE_ASPEED_2700_SDHCI TYPE_ASPEED_SDHCI "-ast2700"
OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
#define ASPEED_SDHCI_NUM_SLOTS 2
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 5/7] hw/sd/aspeed_sdhci: Add AST2700 Support
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
init function and set the value of capability register to "0x0000000719f80080".
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/sd/aspeed_sdhci.c | 16 ++++++++++++++--
include/hw/sd/aspeed_sdhci.h | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
index 4e64e2537a..de92f84111 100644
--- a/hw/sd/aspeed_sdhci.c
+++ b/hw/sd/aspeed_sdhci.c
@@ -239,6 +239,15 @@ static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
asc->capareg = 0x0000000701f80080;
}
+static void aspeed_2700_sdhci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
+
+ dc->desc = "ASPEED 2700 SDHCI Controller";
+ asc->capareg = 0x0000000719f80080;
+}
+
static const TypeInfo aspeed_sdhci_types[] = {
{
.name = TYPE_ASPEED_SDHCI,
@@ -263,8 +272,11 @@ static const TypeInfo aspeed_sdhci_types[] = {
.parent = TYPE_ASPEED_SDHCI,
.class_init = aspeed_2600_sdhci_class_init,
},
+ {
+ .name = TYPE_ASPEED_2700_SDHCI,
+ .parent = TYPE_ASPEED_SDHCI,
+ .class_init = aspeed_2700_sdhci_class_init,
+ },
};
DEFINE_TYPES(aspeed_sdhci_types)
-
-
diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
index 8083797e25..4ef1770471 100644
--- a/include/hw/sd/aspeed_sdhci.h
+++ b/include/hw/sd/aspeed_sdhci.h
@@ -16,6 +16,7 @@
#define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
#define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
#define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
+#define TYPE_ASPEED_2700_SDHCI TYPE_ASPEED_SDHCI "-ast2700"
OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
#define ASPEED_SDHCI_NUM_SLOTS 2
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 5/7] hw/sd/aspeed_sdhci: Add AST2700 Support
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:15 ` Cédric Le Goater
-1 siblings, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:15 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Introduce a new ast2700 class to support AST2700. Add a new ast2700 SDHCI class
> init function and set the value of capability register to "0x0000000719f80080".
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/sd/aspeed_sdhci.c | 16 ++++++++++++++--
> include/hw/sd/aspeed_sdhci.h | 1 +
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/hw/sd/aspeed_sdhci.c b/hw/sd/aspeed_sdhci.c
> index 4e64e2537a..de92f84111 100644
> --- a/hw/sd/aspeed_sdhci.c
> +++ b/hw/sd/aspeed_sdhci.c
> @@ -239,6 +239,15 @@ static void aspeed_2600_sdhci_class_init(ObjectClass *klass, void *data)
> asc->capareg = 0x0000000701f80080;
> }
>
> +static void aspeed_2700_sdhci_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + AspeedSDHCIClass *asc = ASPEED_SDHCI_CLASS(klass);
> +
> + dc->desc = "ASPEED 2700 SDHCI Controller";
> + asc->capareg = 0x0000000719f80080;
> +}
> +
> static const TypeInfo aspeed_sdhci_types[] = {
> {
> .name = TYPE_ASPEED_SDHCI,
> @@ -263,8 +272,11 @@ static const TypeInfo aspeed_sdhci_types[] = {
> .parent = TYPE_ASPEED_SDHCI,
> .class_init = aspeed_2600_sdhci_class_init,
> },
> + {
> + .name = TYPE_ASPEED_2700_SDHCI,
> + .parent = TYPE_ASPEED_SDHCI,
> + .class_init = aspeed_2700_sdhci_class_init,
> + },
> };
>
> DEFINE_TYPES(aspeed_sdhci_types)
> -
> -
> diff --git a/include/hw/sd/aspeed_sdhci.h b/include/hw/sd/aspeed_sdhci.h
> index 8083797e25..4ef1770471 100644
> --- a/include/hw/sd/aspeed_sdhci.h
> +++ b/include/hw/sd/aspeed_sdhci.h
> @@ -16,6 +16,7 @@
> #define TYPE_ASPEED_2400_SDHCI TYPE_ASPEED_SDHCI "-ast2400"
> #define TYPE_ASPEED_2500_SDHCI TYPE_ASPEED_SDHCI "-ast2500"
> #define TYPE_ASPEED_2600_SDHCI TYPE_ASPEED_SDHCI "-ast2600"
> +#define TYPE_ASPEED_2700_SDHCI TYPE_ASPEED_SDHCI "-ast2700"
> OBJECT_DECLARE_TYPE(AspeedSDHCIState, AspeedSDHCIClass, ASPEED_SDHCI)
>
> #define ASPEED_SDHCI_NUM_SLOTS 2
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 6/7] aspeed/soc: Support SDHCI for AST2700
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Add SDHCI model for AST2700 SDHCI support. The SDHCI controller only support 1
slot and registers base address is start at 0x1408_0000 and its interrupt is
connected to GICINT133_INTC at bit 1.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast27x0.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 63d1fcb086..baddd35ecf 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -65,6 +65,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_I2C] = 0x14C0F000,
[ASPEED_DEV_GPIO] = 0x14C0B000,
[ASPEED_DEV_RTC] = 0x12C0F000,
+ [ASPEED_DEV_SDHCI] = 0x14080000,
};
#define AST2700_MAX_IRQ 256
@@ -113,6 +114,7 @@ static const int aspeed_soc_ast2700_irqmap[] = {
[ASPEED_DEV_KCS] = 128,
[ASPEED_DEV_DP] = 28,
[ASPEED_DEV_I3C] = 131,
+ [ASPEED_DEV_SDHCI] = 133,
};
/* GICINT 128 */
@@ -158,6 +160,7 @@ static const int aspeed_soc_ast2700_gic132_intcmap[] = {
/* GICINT 133 */
static const int aspeed_soc_ast2700_gic133_intcmap[] = {
+ [ASPEED_DEV_SDHCI] = 1,
[ASPEED_DEV_PECI] = 4,
};
@@ -380,6 +383,14 @@ static void aspeed_soc_ast2700_init(Object *obj)
object_initialize_child(obj, "gpio", &s->gpio, typename);
object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
+
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
+ object_property_set_int(OBJECT(&s->sdhci), "num-slots", 1, &error_abort);
+
+ /* Init sd card slot class here so that they're under the correct parent */
+ object_initialize_child(obj, "sd-controller.sdhci",
+ &s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
}
/*
@@ -681,6 +692,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
+ /* SDHCI */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdhci), 0,
+ sc->memmap[ASPEED_DEV_SDHCI]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 6/7] aspeed/soc: Support SDHCI for AST2700
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Add SDHCI model for AST2700 SDHCI support. The SDHCI controller only support 1
slot and registers base address is start at 0x1408_0000 and its interrupt is
connected to GICINT133_INTC at bit 1.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast27x0.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 63d1fcb086..baddd35ecf 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -65,6 +65,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
[ASPEED_DEV_I2C] = 0x14C0F000,
[ASPEED_DEV_GPIO] = 0x14C0B000,
[ASPEED_DEV_RTC] = 0x12C0F000,
+ [ASPEED_DEV_SDHCI] = 0x14080000,
};
#define AST2700_MAX_IRQ 256
@@ -113,6 +114,7 @@ static const int aspeed_soc_ast2700_irqmap[] = {
[ASPEED_DEV_KCS] = 128,
[ASPEED_DEV_DP] = 28,
[ASPEED_DEV_I3C] = 131,
+ [ASPEED_DEV_SDHCI] = 133,
};
/* GICINT 128 */
@@ -158,6 +160,7 @@ static const int aspeed_soc_ast2700_gic132_intcmap[] = {
/* GICINT 133 */
static const int aspeed_soc_ast2700_gic133_intcmap[] = {
+ [ASPEED_DEV_SDHCI] = 1,
[ASPEED_DEV_PECI] = 4,
};
@@ -380,6 +383,14 @@ static void aspeed_soc_ast2700_init(Object *obj)
object_initialize_child(obj, "gpio", &s->gpio, typename);
object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
+
+ snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+ object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
+ object_property_set_int(OBJECT(&s->sdhci), "num-slots", 1, &error_abort);
+
+ /* Init sd card slot class here so that they're under the correct parent */
+ object_initialize_child(obj, "sd-controller.sdhci",
+ &s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
}
/*
@@ -681,6 +692,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
+ /* SDHCI */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdhci), 0,
+ sc->memmap[ASPEED_DEV_SDHCI]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 6/7] aspeed/soc: Support SDHCI for AST2700
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:20 ` Cédric Le Goater
-1 siblings, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:20 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Add SDHCI model for AST2700 SDHCI support. The SDHCI controller only support 1
> slot and registers base address is start at 0x1408_0000 and its interrupt is
> connected to GICINT133_INTC at bit 1.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/arm/aspeed_ast27x0.c | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
> index 63d1fcb086..baddd35ecf 100644
> --- a/hw/arm/aspeed_ast27x0.c
> +++ b/hw/arm/aspeed_ast27x0.c
> @@ -65,6 +65,7 @@ static const hwaddr aspeed_soc_ast2700_memmap[] = {
> [ASPEED_DEV_I2C] = 0x14C0F000,
> [ASPEED_DEV_GPIO] = 0x14C0B000,
> [ASPEED_DEV_RTC] = 0x12C0F000,
> + [ASPEED_DEV_SDHCI] = 0x14080000,
> };
>
> #define AST2700_MAX_IRQ 256
> @@ -113,6 +114,7 @@ static const int aspeed_soc_ast2700_irqmap[] = {
> [ASPEED_DEV_KCS] = 128,
> [ASPEED_DEV_DP] = 28,
> [ASPEED_DEV_I3C] = 131,
> + [ASPEED_DEV_SDHCI] = 133,
> };
>
> /* GICINT 128 */
> @@ -158,6 +160,7 @@ static const int aspeed_soc_ast2700_gic132_intcmap[] = {
>
> /* GICINT 133 */
> static const int aspeed_soc_ast2700_gic133_intcmap[] = {
> + [ASPEED_DEV_SDHCI] = 1,
> [ASPEED_DEV_PECI] = 4,
> };
>
> @@ -380,6 +383,14 @@ static void aspeed_soc_ast2700_init(Object *obj)
> object_initialize_child(obj, "gpio", &s->gpio, typename);
>
> object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
> +
> + snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
> + object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
> + object_property_set_int(OBJECT(&s->sdhci), "num-slots", 1, &error_abort);
> +
> + /* Init sd card slot class here so that they're under the correct parent */
> + object_initialize_child(obj, "sd-controller.sdhci",
> + &s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
> }
>
> /*
> @@ -681,6 +692,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
> aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
>
> + /* SDHCI */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
> + return;
> + }
> + aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdhci), 0,
> + sc->memmap[ASPEED_DEV_SDHCI]);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
> + aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
> +
> create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
> create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
> create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH v3 7/7] aspeed/soc: Support eMMC for AST2700
2024-12-04 8:05 ` Jamin Lin via
@ 2024-12-04 8:05 ` Jamin Lin via
-1 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Add SDHCI model for AST2700 eMMC support. The eMMC controller only support 1
slot and registers base address is start at 0x1209_0000 and its interrupt is
connected to GICINT 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast27x0.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index baddd35ecf..23571584b2 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -391,6 +391,12 @@ static void aspeed_soc_ast2700_init(Object *obj)
/* Init sd card slot class here so that they're under the correct parent */
object_initialize_child(obj, "sd-controller.sdhci",
&s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
+
+ object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
+ object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
+
+ object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0],
+ TYPE_SYSBUS_SDHCI);
}
/*
@@ -701,6 +707,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+ /* eMMC */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->emmc), 0,
+ sc->memmap[ASPEED_DEV_EMMC]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* [PATCH v3 7/7] aspeed/soc: Support eMMC for AST2700
@ 2024-12-04 8:05 ` Jamin Lin via
0 siblings, 0 replies; 22+ messages in thread
From: Jamin Lin via @ 2024-12-04 8:05 UTC (permalink / raw)
To: Cédric Le Goater, Peter Maydell, Steven Lee, Troy Lee,
Andrew Jeffery, Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: jamin_lin, troy_lee, yunlin.tang
Add SDHCI model for AST2700 eMMC support. The eMMC controller only support 1
slot and registers base address is start at 0x1209_0000 and its interrupt is
connected to GICINT 15.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed_ast27x0.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index baddd35ecf..23571584b2 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -391,6 +391,12 @@ static void aspeed_soc_ast2700_init(Object *obj)
/* Init sd card slot class here so that they're under the correct parent */
object_initialize_child(obj, "sd-controller.sdhci",
&s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
+
+ object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
+ object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
+
+ object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0],
+ TYPE_SYSBUS_SDHCI);
}
/*
@@ -701,6 +707,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+ /* eMMC */
+ if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
+ return;
+ }
+ aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->emmc), 0,
+ sc->memmap[ASPEED_DEV_EMMC]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
+ aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
+
create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
--
2.34.1
^ permalink raw reply related [flat|nested] 22+ messages in thread* Re: [PATCH v3 7/7] aspeed/soc: Support eMMC for AST2700
2024-12-04 8:05 ` Jamin Lin via
(?)
@ 2024-12-04 8:21 ` Cédric Le Goater
-1 siblings, 0 replies; 22+ messages in thread
From: Cédric Le Goater @ 2024-12-04 8:21 UTC (permalink / raw)
To: Jamin Lin, Peter Maydell, Steven Lee, Troy Lee, Andrew Jeffery,
Joel Stanley, open list:ASPEED BMCs,
open list:All patches CC here
Cc: troy_lee, yunlin.tang
On 12/4/24 09:05, Jamin Lin wrote:
> Add SDHCI model for AST2700 eMMC support. The eMMC controller only support 1
> slot and registers base address is start at 0x1209_0000 and its interrupt is
> connected to GICINT 15.
>
> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Thanks,
C.
> ---
> hw/arm/aspeed_ast27x0.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
> index baddd35ecf..23571584b2 100644
> --- a/hw/arm/aspeed_ast27x0.c
> +++ b/hw/arm/aspeed_ast27x0.c
> @@ -391,6 +391,12 @@ static void aspeed_soc_ast2700_init(Object *obj)
> /* Init sd card slot class here so that they're under the correct parent */
> object_initialize_child(obj, "sd-controller.sdhci",
> &s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
> +
> + object_initialize_child(obj, "emmc-controller", &s->emmc, typename);
> + object_property_set_int(OBJECT(&s->emmc), "num-slots", 1, &error_abort);
> +
> + object_initialize_child(obj, "emmc-controller.sdhci", &s->emmc.slots[0],
> + TYPE_SYSBUS_SDHCI);
> }
>
> /*
> @@ -701,6 +707,15 @@ static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
> sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
> aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
>
> + /* eMMC */
> + if (!sysbus_realize(SYS_BUS_DEVICE(&s->emmc), errp)) {
> + return;
> + }
> + aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->emmc), 0,
> + sc->memmap[ASPEED_DEV_EMMC]);
> + sysbus_connect_irq(SYS_BUS_DEVICE(&s->emmc), 0,
> + aspeed_soc_get_irq(s, ASPEED_DEV_EMMC));
> +
> create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
> create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
> create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);
^ permalink raw reply [flat|nested] 22+ messages in thread