[PATCH v1 2/2] riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 port

From: E Shattow <e@freeshell.de>
To: Conor Dooley <conor@kernel.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: E Shattow <e@freeshell.de>,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 2/2] riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 port
Date: Thu,  2 Jan 2025 10:37:37 -0800	[thread overview]
Message-ID: <20250102183746.411526-3-e@freeshell.de> (raw)
In-Reply-To: <20250102183746.411526-1-e@freeshell.de>

One of four USB-A ports on the Pine64 Star64 is USB 3.0 which requires to
disable PCIE0 and change the mode of PCIE0 PHY to USB3.0 operation. The
remaining three USB-A ports are USB 2.0 with the USB0 PHY and do not
conflict with any of PCIE0 or PCIE1. PCIE1 (1-lane) routes to a PCIe X4
connector.

Signed-off-by: E Shattow <e@freeshell.de>
---
 arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
index b764d4d92fd9..31e825be2065 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
+++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
@@ -100,3 +100,8 @@ &usb0 {
 	pinctrl-0 = <&usb0_pins>;
 	status = "okay";
 };
+
+&usb_cdns3 {
+	phys = <&usbphy0>, <&pciephy0>;
+	phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
+};
-- 
2.45.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
