* [PATCH v4 0/7] arm64: dts: rockchip: Orange Pi 5 Max board @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip Changes in v4: - Orange Pi 5 Ultra was released and does not use VP0 to HDMI0 - Move HDMI0 from common to the board level - Make DTSI to be shared by the credit card sized 5 Max and 5 Ultra - Updates for the newly submitted HDMI1 support - Add Ack for dt-binding Changes in v3: - Refactor to share common include with Orange Pi 5 Plus Changes in v2: - squashed commits together for initial board file Link to v1: https://lore.kernel.org/linux-rockchip/20241026100310.52679-1-honyuenkwun@gmail.com/ ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH v4 0/7] arm64: dts: rockchip: Orange Pi 5 Max board @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip Changes in v4: - Orange Pi 5 Ultra was released and does not use VP0 to HDMI0 - Move HDMI0 from common to the board level - Make DTSI to be shared by the credit card sized 5 Max and 5 Ultra - Updates for the newly submitted HDMI1 support - Add Ack for dt-binding Changes in v3: - Refactor to share common include with Orange Pi 5 Plus Changes in v2: - squashed commits together for initial board file Link to v1: https://lore.kernel.org/linux-rockchip/20241026100310.52679-1-honyuenkwun@gmail.com/ _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon for Orange Pi 5 Plus/Max/Ultra and AI Max --- .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- 2 files changed, 77 insertions(+), 951 deletions(-) copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 9f5a38b290bf..fd49a7c8a381 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -6,86 +6,15 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> -#include "rk3588.dtsi" +#include "rk3588-orangepi-5.dtsi" / { model = "Xunlong Orange Pi 5 Plus"; compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; - aliases { - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - adc-keys-0 { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-maskrom { - label = "Mask Rom"; - linux,code = <KEY_SETUP>; - press-threshold-microvolt = <2000>; - }; - }; - - adc-keys-1 { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <2000>; - }; - }; - - speaker_amp: speaker-audio-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; - sound-name-prefix = "Speaker Amp"; - }; - - headphone_amp: headphones-audio-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; - sound-name-prefix = "Headphones Amp"; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - - led { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; - }; - }; - hdmi0-con { compatible = "hdmi-connector"; type = "a"; @@ -97,24 +26,11 @@ hdmi0_con_in: endpoint { }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 70 75 80 100>; - fan-supply = <&vcc5v0_sys>; - pwms = <&pwm3 0 50000 0>; - #cooling-cells = <2>; - }; - - pwm-leds { - compatible = "pwm-leds"; - - led { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - max-brightness = <255>; - pwms = <&pwm2 0 25000 0>; - }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; }; rfkill { @@ -123,161 +39,62 @@ rfkill { radio-type = "wlan"; shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; - - sound { - compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_detect>; - simple-audio-card,name = "Analog"; - simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; - simple-audio-card,bitclock-master = <&daicpu>; - simple-audio-card,frame-master = <&daicpu>; - /*TODO: SARADC_IN3 is used as MIC detection / key input */ - - simple-audio-card,widgets = - "Microphone", "Onboard Microphone", - "Microphone", "Microphone Jack", - "Speaker", "Speaker", - "Headphone", "Headphones"; - - simple-audio-card,routing = - "Headphones", "LOUT1", - "Headphones", "ROUT1", - "Speaker", "LOUT2", - "Speaker", "ROUT2", - - "Headphones", "Headphones Amp OUTL", - "Headphones", "Headphones Amp OUTR", - "Headphones Amp INL", "LOUT1", - "Headphones Amp INR", "ROUT1", - - "Speaker", "Speaker Amp OUTL", - "Speaker", "Speaker Amp OUTR", - "Speaker Amp INL", "LOUT2", - "Speaker Amp INR", "ROUT2", - - /* single ended signal to LINPUT1 */ - "LINPUT1", "Microphone Jack", - "RINPUT1", "Microphone Jack", - /* differential signal */ - "LINPUT2", "Onboard Microphone", - "RINPUT2", "Onboard Microphone"; - - daicpu: simple-audio-card,cpu { - sound-dai = <&i2s0_8ch>; - system-clock-frequency = <12288000>; - }; - - daicodec: simple-audio-card,codec { - sound-dai = <&es8388>; - system-clock-frequency = <12288000>; - }; - }; - - vcc3v3_pcie30: regulator-vcc3v3-pcie30 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc3v3_pcie30"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth { - compatible = "regulator-fixed"; - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; - regulator-name = "vcc3v3_pcie_eth"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_wf: regulator-vcc3v3-wf { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc3v3_wf"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc5v0_usb20: regulator-vcc5v0-usb20 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_en>; - regulator-name = "vcc5v0_usb20"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; }; -&combphy0_ps { +&speaker_amp { + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; status = "okay"; }; -&combphy1_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; +&headphone_amp { + enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; }; -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; +&analog_sound { + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; + simple-audio-card,widgets = + "Microphone", "Onboard Microphone", + "Microphone", "Microphone Jack", + "Speaker", "Speaker", + "Headphone", "Headphones"; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Speaker", "LOUT2", + "Speaker", "ROUT2", + + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Headphones Amp INL", "LOUT1", + "Headphones Amp INR", "ROUT1", + + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LOUT2", + "Speaker Amp INR", "ROUT2", + + /* single ended signal to LINPUT1 */ + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + /* differential signal */ + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; }; -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; +&combphy0_ps { + status = "okay"; }; -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; +&combphy1_ps { + status = "okay"; }; -&gpu { - mali-supply = <&vdd_gpu_s0>; - status = "okay"; +&fan { + pwms = <&pwm3 0 50000 0>; }; &hdmi0 { @@ -300,128 +117,20 @@ &hdptxphy_hdmi0 { status = "okay"; }; -&i2c0 { +&hym8563 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - clock-frequency = <400000>; - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; + pinctrl-0 = <&hym8563_int>; }; -&i2c7 { - status = "okay"; - - /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */ - es8388: audio-codec@11 { - compatible = "everest,es8388"; - reg = <0x11>; - clocks = <&cru I2S0_8CH_MCLKOUT>; - AVDD-supply = <&vcc_1v8_s0>; - DVDD-supply = <&vcc_1v8_s0>; - HPVDD-supply = <&vcc_3v3_s0>; - PVDD-supply = <&vcc_3v3_s0>; - assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; - assigned-clock-rates = <12288000>; - #sound-dai-cells = <0>; - }; -}; - -&i2s0_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_mclk - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdo0>; +&led_blue_gpio { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; status = "okay"; }; -&i2s2_2ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s2m0_lrck - &i2s2m0_sclk - &i2s2m0_sdi - &i2s2m0_sdo>; - status = "okay"; -}; - -&package_thermal { - polling-delay = <1000>; - - cooling-maps { - map0 { - trip = <&package_fan0>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - trip = <&package_fan1>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; - - trips { - package_fan0: package-fan0 { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - package_fan1: package-fan1 { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; +&led_green_pwm { + pwms = <&pwm2 0 25000 0>; }; /* phy1 - M.KEY socket */ @@ -445,16 +154,6 @@ &pcie2x1l2 { status = "okay"; }; -&pcie30phy { - status = "okay"; -}; - -&pcie3x4 { - reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30>; - status = "okay"; -}; - &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -498,405 +197,13 @@ &pwm3 { status = "okay"; }; -&saradc { - vref-supply = <&vcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - max-frequency = <200000000>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - no-sdio; - no-mmc; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; - vqmmc-supply = <&vccio_sd_s0>; +&recovery_button { status = "okay"; }; &sfc { pinctrl-names = "default"; pinctrl-0 = <&fspim1_pins>; - status = "okay"; - - spi_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <100000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -&spi2 { - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - num-cs = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - status = "okay"; - - pmic@0 { - compatible = "rockchip,rk806"; - reg = <0x0>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - spi-max-frequency = <1000000>; - system-power-controller; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vdd2_ddr_s3>; - vcc14-supply = <&vdd2_ddr_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: dcdc-reg1 { - regulator-name = "vdd_gpu_s0"; - regulator-boot-on; - regulator-enable-ramp-delay = <400>; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: dcdc-reg2 { - regulator-name = "vdd_cpu_lit_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-name = "vdd_log_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <825000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: dcdc-reg4 { - regulator-name = "vdd_vdenc_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <825000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-name = "vdd_ddr_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-name = "vdd2_ddr_s3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-name = "vdd_2v0_pldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-name = "vcc_3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-name = "vddq_ddr_s0"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-name = "vcc_1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-name = "avcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - /* shorted to avcc_1v8_s0 on the board */ - vcc_1v8_s0: pldo-reg2 { - regulator-name = "vcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-name = "avdd_1v2_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-name = "vcc_3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-name = "vccio_sd_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-name = "pldo6_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-name = "vdd_0v75_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-name = "vdd_ddr_pll_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-name = "avdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - /* - * The schematic mentions that actual setting - * should be 0.8375V. RK3588 datasheet specifies - * maximum as 0.825V. So we set datasheet max - * here. - */ - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <825000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-name = "vdd_0v85_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-name = "vdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy3 { - status = "okay"; -}; - -&u2phy2_host { - phy-supply = <&vcc5v0_usb20>; - status = "okay"; -}; - -&u2phy3_host { - phy-supply = <&vcc5v0_usb20>; - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; }; &uart9 { @@ -904,28 +211,18 @@ &uart9 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; +&vcc3v3_pcie_eth { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; }; -&usb_host0_ohci { +&vcc3v3_wf { status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vop { - status = "okay"; +&vcc5v0_usb20 { + gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb20_en>; }; &vp0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi similarity index 80% copy from arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts copy to arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index 9f5a38b290bf..d72afd368d8b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -9,14 +9,10 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> #include "rk3588.dtsi" / { - model = "Xunlong Orange Pi 5 Plus"; - compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; - aliases { mmc0 = &sdhci; mmc1 = &sdmmc; @@ -40,12 +36,13 @@ button-maskrom { }; }; - adc-keys-1 { + recovery_button: adc-keys-1 { compatible = "adc-keys"; io-channels = <&saradc 1>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; + status = "disabled"; button-recovery { label = "Recovery"; @@ -56,44 +53,23 @@ button-recovery { speaker_amp: speaker-audio-amplifier { compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Speaker Amp"; + status = "disabled"; }; headphone_amp: headphones-audio-amplifier { compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Headphones Amp"; }; - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - gpio-leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - led { + led_blue_gpio: led { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_INDICATOR; function-enumerator = <1>; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; - }; - }; - - hdmi0-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi0_con_in: endpoint { - remote-endpoint = <&hdmi0_out_con>; - }; + status = "disabled"; }; }; @@ -101,19 +77,17 @@ fan: pwm-fan { compatible = "pwm-fan"; cooling-levels = <0 70 75 80 100>; fan-supply = <&vcc5v0_sys>; - pwms = <&pwm3 0 50000 0>; #cooling-cells = <2>; }; pwm-leds { compatible = "pwm-leds"; - led { + led_green_pwm: led-2 { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_INDICATOR; function-enumerator = <2>; max-brightness = <255>; - pwms = <&pwm2 0 25000 0>; }; }; @@ -124,48 +98,15 @@ rfkill { shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; - sound { + analog_sound: sound { compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_detect>; simple-audio-card,name = "Analog"; - simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; simple-audio-card,bitclock-master = <&daicpu>; simple-audio-card,frame-master = <&daicpu>; /*TODO: SARADC_IN3 is used as MIC detection / key input */ - simple-audio-card,widgets = - "Microphone", "Onboard Microphone", - "Microphone", "Microphone Jack", - "Speaker", "Speaker", - "Headphone", "Headphones"; - - simple-audio-card,routing = - "Headphones", "LOUT1", - "Headphones", "ROUT1", - "Speaker", "LOUT2", - "Speaker", "ROUT2", - - "Headphones", "Headphones Amp OUTL", - "Headphones", "Headphones Amp OUTR", - "Headphones Amp INL", "LOUT1", - "Headphones Amp INR", "ROUT1", - - "Speaker", "Speaker Amp OUTL", - "Speaker", "Speaker Amp OUTR", - "Speaker Amp INL", "LOUT2", - "Speaker Amp INR", "ROUT2", - - /* single ended signal to LINPUT1 */ - "LINPUT1", "Microphone Jack", - "RINPUT1", "Microphone Jack", - /* differential signal */ - "LINPUT2", "Onboard Microphone", - "RINPUT2", "Onboard Microphone"; - daicpu: simple-audio-card,cpu { sound-dai = <&i2s0_8ch>; system-clock-frequency = <12288000>; @@ -190,12 +131,11 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 { vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth { compatible = "regulator-fixed"; - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; regulator-name = "vcc3v3_pcie_eth"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_3v3_s3>; }; vcc3v3_wf: regulator-vcc3v3-wf { @@ -207,6 +147,7 @@ vcc3v3_wf: regulator-vcc3v3-wf { regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; + status = "disabled"; }; vcc5v0_sys: regulator-vcc5v0-sys { @@ -221,9 +162,6 @@ vcc5v0_sys: regulator-vcc5v0-sys { vcc5v0_usb20: regulator-vcc5v0-usb20 { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_en>; regulator-name = "vcc5v0_usb20"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -231,14 +169,6 @@ vcc5v0_usb20: regulator-vcc5v0-usb20 { }; }; -&combphy0_ps { - status = "okay"; -}; - -&combphy1_ps { - status = "okay"; -}; - &combphy2_psu { status = "okay"; }; @@ -280,26 +210,6 @@ &gpu { status = "okay"; }; -&hdmi0 { - status = "okay"; -}; - -&hdmi0_in { - hdmi0_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi0>; - }; -}; - -&hdmi0_out { - hdmi0_out_con: endpoint { - remote-endpoint = <&hdmi0_con_in>; - }; -}; - -&hdptxphy_hdmi0 { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -347,12 +257,8 @@ &i2c6 { hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; wakeup-source; }; }; @@ -365,10 +271,11 @@ es8388: audio-codec@11 { compatible = "everest,es8388"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; - AVDD-supply = <&vcc_1v8_s0>; + clock-names = "mclk"; + AVDD-supply = <&vcc_3v3_s0>; DVDD-supply = <&vcc_1v8_s0>; HPVDD-supply = <&vcc_3v3_s0>; - PVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_1v8_s0>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; #sound-dai-cells = <0>; @@ -424,27 +331,6 @@ package_fan1: package-fan1 { }; }; -/* phy1 - M.KEY socket */ -&pcie2x1l0 { - reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_wf>; - status = "okay"; -}; - -/* phy2 - right ethernet port */ -&pcie2x1l1 { - reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_eth>; - status = "okay"; -}; - -/* phy0 - left ethernet port */ -&pcie2x1l2 { - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_eth>; - status = "okay"; -}; - &pcie30phy { status = "okay"; }; @@ -455,49 +341,6 @@ &pcie3x4 { status = "okay"; }; -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - blue_led_pin: blue-led { - rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir-receiver { - ir_receiver_pin: ir-receiver-pin { - rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sound { - hp_detect: hp-detect { - rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb20_en: vcc5v0-usb20-en { - rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm2 { - pinctrl-0 = <&pwm2m1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pwm3 { - pinctrl-0 = <&pwm3m1_pins>; - status = "okay"; -}; - &saradc { vref-supply = <&vcc_1v8_s0>; status = "okay"; @@ -529,8 +372,6 @@ &sdmmc { }; &sfc { - pinctrl-names = "default"; - pinctrl-0 = <&fspim1_pins>; status = "okay"; spi_flash: flash@0 { @@ -899,11 +740,6 @@ &uart2 { status = "okay"; }; -&uart9 { - pinctrl-0 = <&uart9m0_xfer>; - status = "okay"; -}; - &usb_host0_ehci { status = "okay"; }; @@ -927,10 +763,3 @@ &vop_mmu { &vop { status = "okay"; }; - -&vp0 { - vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi0_in_vp0>; - }; -}; -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon for Orange Pi 5 Plus/Max/Ultra and AI Max --- .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- 2 files changed, 77 insertions(+), 951 deletions(-) copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 9f5a38b290bf..fd49a7c8a381 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -6,86 +6,15 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/leds/common.h> -#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> -#include "rk3588.dtsi" +#include "rk3588-orangepi-5.dtsi" / { model = "Xunlong Orange Pi 5 Plus"; compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; - aliases { - mmc0 = &sdhci; - mmc1 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - adc-keys-0 { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-maskrom { - label = "Mask Rom"; - linux,code = <KEY_SETUP>; - press-threshold-microvolt = <2000>; - }; - }; - - adc-keys-1 { - compatible = "adc-keys"; - io-channels = <&saradc 1>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - button-recovery { - label = "Recovery"; - linux,code = <KEY_VENDOR>; - press-threshold-microvolt = <2000>; - }; - }; - - speaker_amp: speaker-audio-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; - sound-name-prefix = "Speaker Amp"; - }; - - headphone_amp: headphones-audio-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; - sound-name-prefix = "Headphones Amp"; - }; - - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - - led { - color = <LED_COLOR_ID_BLUE>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <1>; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; - }; - }; - hdmi0-con { compatible = "hdmi-connector"; type = "a"; @@ -97,24 +26,11 @@ hdmi0_con_in: endpoint { }; }; - fan: pwm-fan { - compatible = "pwm-fan"; - cooling-levels = <0 70 75 80 100>; - fan-supply = <&vcc5v0_sys>; - pwms = <&pwm3 0 50000 0>; - #cooling-cells = <2>; - }; - - pwm-leds { - compatible = "pwm-leds"; - - led { - color = <LED_COLOR_ID_GREEN>; - function = LED_FUNCTION_INDICATOR; - function-enumerator = <2>; - max-brightness = <255>; - pwms = <&pwm2 0 25000 0>; - }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; }; rfkill { @@ -123,161 +39,62 @@ rfkill { radio-type = "wlan"; shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; - - sound { - compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_detect>; - simple-audio-card,name = "Analog"; - simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; - simple-audio-card,bitclock-master = <&daicpu>; - simple-audio-card,frame-master = <&daicpu>; - /*TODO: SARADC_IN3 is used as MIC detection / key input */ - - simple-audio-card,widgets = - "Microphone", "Onboard Microphone", - "Microphone", "Microphone Jack", - "Speaker", "Speaker", - "Headphone", "Headphones"; - - simple-audio-card,routing = - "Headphones", "LOUT1", - "Headphones", "ROUT1", - "Speaker", "LOUT2", - "Speaker", "ROUT2", - - "Headphones", "Headphones Amp OUTL", - "Headphones", "Headphones Amp OUTR", - "Headphones Amp INL", "LOUT1", - "Headphones Amp INR", "ROUT1", - - "Speaker", "Speaker Amp OUTL", - "Speaker", "Speaker Amp OUTR", - "Speaker Amp INL", "LOUT2", - "Speaker Amp INR", "ROUT2", - - /* single ended signal to LINPUT1 */ - "LINPUT1", "Microphone Jack", - "RINPUT1", "Microphone Jack", - /* differential signal */ - "LINPUT2", "Onboard Microphone", - "RINPUT2", "Onboard Microphone"; - - daicpu: simple-audio-card,cpu { - sound-dai = <&i2s0_8ch>; - system-clock-frequency = <12288000>; - }; - - daicodec: simple-audio-card,codec { - sound-dai = <&es8388>; - system-clock-frequency = <12288000>; - }; - }; - - vcc3v3_pcie30: regulator-vcc3v3-pcie30 { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc3v3_pcie30"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <5000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth { - compatible = "regulator-fixed"; - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; - regulator-name = "vcc3v3_pcie_eth"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc3v3_wf: regulator-vcc3v3-wf { - compatible = "regulator-fixed"; - enable-active-high; - gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>; - regulator-name = "vcc3v3_wf"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; - }; - - vcc5v0_sys: regulator-vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - vcc5v0_usb20: regulator-vcc5v0-usb20 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_en>; - regulator-name = "vcc5v0_usb20"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v0_sys>; - }; }; -&combphy0_ps { +&speaker_amp { + enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; status = "okay"; }; -&combphy1_ps { - status = "okay"; -}; - -&combphy2_psu { - status = "okay"; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_big0_s0>; +&headphone_amp { + enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; }; -&cpu_b1 { - cpu-supply = <&vdd_cpu_big0_s0>; -}; - -&cpu_b2 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_b3 { - cpu-supply = <&vdd_cpu_big1_s0>; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_lit_s0>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_lit_s0>; +&analog_sound { + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; + simple-audio-card,widgets = + "Microphone", "Onboard Microphone", + "Microphone", "Microphone Jack", + "Speaker", "Speaker", + "Headphone", "Headphones"; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "Speaker", "LOUT2", + "Speaker", "ROUT2", + + "Headphones", "Headphones Amp OUTL", + "Headphones", "Headphones Amp OUTR", + "Headphones Amp INL", "LOUT1", + "Headphones Amp INR", "ROUT1", + + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "LOUT2", + "Speaker Amp INR", "ROUT2", + + /* single ended signal to LINPUT1 */ + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + /* differential signal */ + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; }; -&cpu_l2 { - cpu-supply = <&vdd_cpu_lit_s0>; +&combphy0_ps { + status = "okay"; }; -&cpu_l3 { - cpu-supply = <&vdd_cpu_lit_s0>; +&combphy1_ps { + status = "okay"; }; -&gpu { - mali-supply = <&vdd_gpu_s0>; - status = "okay"; +&fan { + pwms = <&pwm3 0 50000 0>; }; &hdmi0 { @@ -300,128 +117,20 @@ &hdptxphy_hdmi0 { status = "okay"; }; -&i2c0 { +&hym8563 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&i2c0m2_xfer>; - status = "okay"; - - vdd_cpu_big0_s0: regulator@42 { - compatible = "rockchip,rk8602"; - reg = <0x42>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big0_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_big1_s0: regulator@43 { - compatible = "rockchip,rk8603", "rockchip,rk8602"; - reg = <0x43>; - fcs,suspend-voltage-selector = <1>; - regulator-name = "vdd_cpu_big1_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1050000>; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c6 { - clock-frequency = <400000>; - status = "okay"; - - hym8563: rtc@51 { - compatible = "haoyu,hym8563"; - reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <0>; - clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; - wakeup-source; - }; + pinctrl-0 = <&hym8563_int>; }; -&i2c7 { - status = "okay"; - - /* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */ - es8388: audio-codec@11 { - compatible = "everest,es8388"; - reg = <0x11>; - clocks = <&cru I2S0_8CH_MCLKOUT>; - AVDD-supply = <&vcc_1v8_s0>; - DVDD-supply = <&vcc_1v8_s0>; - HPVDD-supply = <&vcc_3v3_s0>; - PVDD-supply = <&vcc_3v3_s0>; - assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; - assigned-clock-rates = <12288000>; - #sound-dai-cells = <0>; - }; -}; - -&i2s0_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_lrck - &i2s0_mclk - &i2s0_sclk - &i2s0_sdi0 - &i2s0_sdo0>; +&led_blue_gpio { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; status = "okay"; }; -&i2s2_2ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s2m0_lrck - &i2s2m0_sclk - &i2s2m0_sdi - &i2s2m0_sdo>; - status = "okay"; -}; - -&package_thermal { - polling-delay = <1000>; - - cooling-maps { - map0 { - trip = <&package_fan0>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - trip = <&package_fan1>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; - - trips { - package_fan0: package-fan0 { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - package_fan1: package-fan1 { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; +&led_green_pwm { + pwms = <&pwm2 0 25000 0>; }; /* phy1 - M.KEY socket */ @@ -445,16 +154,6 @@ &pcie2x1l2 { status = "okay"; }; -&pcie30phy { - status = "okay"; -}; - -&pcie3x4 { - reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie30>; - status = "okay"; -}; - &pinctrl { hym8563 { hym8563_int: hym8563-int { @@ -498,405 +197,13 @@ &pwm3 { status = "okay"; }; -&saradc { - vref-supply = <&vcc_1v8_s0>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - no-sdio; - no-sd; - non-removable; - max-frequency = <200000000>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - no-sdio; - no-mmc; - sd-uhs-sdr104; - vmmc-supply = <&vcc_3v3_s3>; - vqmmc-supply = <&vccio_sd_s0>; +&recovery_button { status = "okay"; }; &sfc { pinctrl-names = "default"; pinctrl-0 = <&fspim1_pins>; - status = "okay"; - - spi_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <100000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <1>; - }; -}; - -&spi2 { - assigned-clocks = <&cru CLK_SPI2>; - assigned-clock-rates = <200000000>; - num-cs = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; - status = "okay"; - - pmic@0 { - compatible = "rockchip,rk806"; - reg = <0x0>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, - <&rk806_dvs2_null>, <&rk806_dvs3_null>; - spi-max-frequency = <1000000>; - system-power-controller; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc5v0_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc_2v0_pldo_s3>; - vcc12-supply = <&vcc5v0_sys>; - vcc13-supply = <&vdd2_ddr_s3>; - vcc14-supply = <&vdd2_ddr_s3>; - vcca-supply = <&vcc5v0_sys>; - - gpio-controller; - #gpio-cells = <2>; - - rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl1"; - function = "pin_fun0"; - }; - - rk806_dvs2_null: dvs2-null-pins { - pins = "gpio_pwrctrl2"; - function = "pin_fun0"; - }; - - rk806_dvs3_null: dvs3-null-pins { - pins = "gpio_pwrctrl3"; - function = "pin_fun0"; - }; - - regulators { - vdd_gpu_s0: dcdc-reg1 { - regulator-name = "vdd_gpu_s0"; - regulator-boot-on; - regulator-enable-ramp-delay = <400>; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_lit_s0: dcdc-reg2 { - regulator-name = "vdd_cpu_lit_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <950000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_log_s0: dcdc-reg3 { - regulator-name = "vdd_log_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <825000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_vdenc_s0: dcdc-reg4 { - regulator-name = "vdd_vdenc_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <825000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_ddr_s0: dcdc-reg5 { - regulator-name = "vdd_ddr_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <900000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - vdd2_ddr_s3: dcdc-reg6 { - regulator-name = "vdd2_ddr_s3"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_2v0_pldo_s3: dcdc-reg7 { - regulator-name = "vdd_2v0_pldo_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <2000000>; - }; - }; - - vcc_3v3_s3: dcdc-reg8 { - regulator-name = "vcc_3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vddq_ddr_s0: dcdc-reg9 { - regulator-name = "vddq_ddr_s0"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8_s3: dcdc-reg10 { - regulator-name = "vcc_1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avcc_1v8_s0: pldo-reg1 { - regulator-name = "avcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - /* shorted to avcc_1v8_s0 on the board */ - vcc_1v8_s0: pldo-reg2 { - regulator-name = "vcc_1v8_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - avdd_1v2_s0: pldo-reg3 { - regulator-name = "avdd_1v2_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3_s0: pldo-reg4 { - regulator-name = "vcc_3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd_s0: pldo-reg5 { - regulator-name = "vccio_sd_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - pldo6_s3: pldo-reg6 { - regulator-name = "pldo6_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_0v75_s3: nldo-reg1 { - regulator-name = "vdd_0v75_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <750000>; - }; - }; - - vdd_ddr_pll_s0: nldo-reg2 { - regulator-name = "vdd_ddr_pll_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <850000>; - }; - }; - - avdd_0v75_s0: nldo-reg3 { - regulator-name = "avdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - /* - * The schematic mentions that actual setting - * should be 0.8375V. RK3588 datasheet specifies - * maximum as 0.825V. So we set datasheet max - * here. - */ - regulator-min-microvolt = <825000>; - regulator-max-microvolt = <825000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v85_s0: nldo-reg4 { - regulator-name = "vdd_0v85_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_0v75_s0: nldo-reg5 { - regulator-name = "vdd_0v75_s0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy2 { - status = "okay"; -}; - -&u2phy3 { - status = "okay"; -}; - -&u2phy2_host { - phy-supply = <&vcc5v0_usb20>; - status = "okay"; -}; - -&u2phy3_host { - phy-supply = <&vcc5v0_usb20>; - status = "okay"; -}; - -&uart2 { - pinctrl-0 = <&uart2m0_xfer>; - status = "okay"; }; &uart9 { @@ -904,28 +211,18 @@ &uart9 { status = "okay"; }; -&usb_host0_ehci { - status = "okay"; +&vcc3v3_pcie_eth { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; }; -&usb_host0_ohci { +&vcc3v3_wf { status = "okay"; }; -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vop { - status = "okay"; +&vcc5v0_usb20 { + gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb20_en>; }; &vp0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi similarity index 80% copy from arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts copy to arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index 9f5a38b290bf..d72afd368d8b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -9,14 +9,10 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> -#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> #include "rk3588.dtsi" / { - model = "Xunlong Orange Pi 5 Plus"; - compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588"; - aliases { mmc0 = &sdhci; mmc1 = &sdmmc; @@ -40,12 +36,13 @@ button-maskrom { }; }; - adc-keys-1 { + recovery_button: adc-keys-1 { compatible = "adc-keys"; io-channels = <&saradc 1>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; + status = "disabled"; button-recovery { label = "Recovery"; @@ -56,44 +53,23 @@ button-recovery { speaker_amp: speaker-audio-amplifier { compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Speaker Amp"; + status = "disabled"; }; headphone_amp: headphones-audio-amplifier { compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; sound-name-prefix = "Headphones Amp"; }; - ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_receiver_pin>; - }; - gpio-leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - led { + led_blue_gpio: led { color = <LED_COLOR_ID_BLUE>; function = LED_FUNCTION_INDICATOR; function-enumerator = <1>; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>; - }; - }; - - hdmi0-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi0_con_in: endpoint { - remote-endpoint = <&hdmi0_out_con>; - }; + status = "disabled"; }; }; @@ -101,19 +77,17 @@ fan: pwm-fan { compatible = "pwm-fan"; cooling-levels = <0 70 75 80 100>; fan-supply = <&vcc5v0_sys>; - pwms = <&pwm3 0 50000 0>; #cooling-cells = <2>; }; pwm-leds { compatible = "pwm-leds"; - led { + led_green_pwm: led-2 { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_INDICATOR; function-enumerator = <2>; max-brightness = <255>; - pwms = <&pwm2 0 25000 0>; }; }; @@ -124,48 +98,15 @@ rfkill { shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; }; - sound { + analog_sound: sound { compatible = "simple-audio-card"; - pinctrl-names = "default"; - pinctrl-0 = <&hp_detect>; simple-audio-card,name = "Analog"; - simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>; simple-audio-card,bitclock-master = <&daicpu>; simple-audio-card,frame-master = <&daicpu>; /*TODO: SARADC_IN3 is used as MIC detection / key input */ - simple-audio-card,widgets = - "Microphone", "Onboard Microphone", - "Microphone", "Microphone Jack", - "Speaker", "Speaker", - "Headphone", "Headphones"; - - simple-audio-card,routing = - "Headphones", "LOUT1", - "Headphones", "ROUT1", - "Speaker", "LOUT2", - "Speaker", "ROUT2", - - "Headphones", "Headphones Amp OUTL", - "Headphones", "Headphones Amp OUTR", - "Headphones Amp INL", "LOUT1", - "Headphones Amp INR", "ROUT1", - - "Speaker", "Speaker Amp OUTL", - "Speaker", "Speaker Amp OUTR", - "Speaker Amp INL", "LOUT2", - "Speaker Amp INR", "ROUT2", - - /* single ended signal to LINPUT1 */ - "LINPUT1", "Microphone Jack", - "RINPUT1", "Microphone Jack", - /* differential signal */ - "LINPUT2", "Onboard Microphone", - "RINPUT2", "Onboard Microphone"; - daicpu: simple-audio-card,cpu { sound-dai = <&i2s0_8ch>; system-clock-frequency = <12288000>; @@ -190,12 +131,11 @@ vcc3v3_pcie30: regulator-vcc3v3-pcie30 { vcc3v3_pcie_eth: regulator-vcc3v3-pcie-eth { compatible = "regulator-fixed"; - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; regulator-name = "vcc3v3_pcie_eth"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; - vin-supply = <&vcc5v0_sys>; + vin-supply = <&vcc_3v3_s3>; }; vcc3v3_wf: regulator-vcc3v3-wf { @@ -207,6 +147,7 @@ vcc3v3_wf: regulator-vcc3v3-wf { regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; vin-supply = <&vcc5v0_sys>; + status = "disabled"; }; vcc5v0_sys: regulator-vcc5v0-sys { @@ -221,9 +162,6 @@ vcc5v0_sys: regulator-vcc5v0-sys { vcc5v0_usb20: regulator-vcc5v0-usb20 { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb20_en>; regulator-name = "vcc5v0_usb20"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -231,14 +169,6 @@ vcc5v0_usb20: regulator-vcc5v0-usb20 { }; }; -&combphy0_ps { - status = "okay"; -}; - -&combphy1_ps { - status = "okay"; -}; - &combphy2_psu { status = "okay"; }; @@ -280,26 +210,6 @@ &gpu { status = "okay"; }; -&hdmi0 { - status = "okay"; -}; - -&hdmi0_in { - hdmi0_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi0>; - }; -}; - -&hdmi0_out { - hdmi0_out_con: endpoint { - remote-endpoint = <&hdmi0_con_in>; - }; -}; - -&hdptxphy_hdmi0 { - status = "okay"; -}; - &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; @@ -347,12 +257,8 @@ &i2c6 { hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; clock-output-names = "hym8563"; - pinctrl-names = "default"; - pinctrl-0 = <&hym8563_int>; wakeup-source; }; }; @@ -365,10 +271,11 @@ es8388: audio-codec@11 { compatible = "everest,es8388"; reg = <0x11>; clocks = <&cru I2S0_8CH_MCLKOUT>; - AVDD-supply = <&vcc_1v8_s0>; + clock-names = "mclk"; + AVDD-supply = <&vcc_3v3_s0>; DVDD-supply = <&vcc_1v8_s0>; HPVDD-supply = <&vcc_3v3_s0>; - PVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_1v8_s0>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; #sound-dai-cells = <0>; @@ -424,27 +331,6 @@ package_fan1: package-fan1 { }; }; -/* phy1 - M.KEY socket */ -&pcie2x1l0 { - reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_wf>; - status = "okay"; -}; - -/* phy2 - right ethernet port */ -&pcie2x1l1 { - reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_eth>; - status = "okay"; -}; - -/* phy0 - left ethernet port */ -&pcie2x1l2 { - reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; - vpcie3v3-supply = <&vcc3v3_pcie_eth>; - status = "okay"; -}; - &pcie30phy { status = "okay"; }; @@ -455,49 +341,6 @@ &pcie3x4 { status = "okay"; }; -&pinctrl { - hym8563 { - hym8563_int: hym8563-int { - rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - blue_led_pin: blue-led { - rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - ir-receiver { - ir_receiver_pin: ir-receiver-pin { - rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sound { - hp_detect: hp-detect { - rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - vcc5v0_usb20_en: vcc5v0-usb20-en { - rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm2 { - pinctrl-0 = <&pwm2m1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pwm3 { - pinctrl-0 = <&pwm3m1_pins>; - status = "okay"; -}; - &saradc { vref-supply = <&vcc_1v8_s0>; status = "okay"; @@ -529,8 +372,6 @@ &sdmmc { }; &sfc { - pinctrl-names = "default"; - pinctrl-0 = <&fspim1_pins>; status = "okay"; spi_flash: flash@0 { @@ -899,11 +740,6 @@ &uart2 { status = "okay"; }; -&uart9 { - pinctrl-0 = <&uart9m0_xfer>; - status = "okay"; -}; - &usb_host0_ehci { status = "okay"; }; @@ -927,10 +763,3 @@ &vop_mmu { &vop { status = "okay"; }; - -&vp0 { - vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = <ROCKCHIP_VOP2_EP_HDMI0>; - remote-endpoint = <&hdmi0_in_vp0>; - }; -}; -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 19:20 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:20 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:44 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > for Orange Pi 5 Plus/Max/Ultra and AI Max > --- > .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- > ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- > 2 files changed, 77 insertions(+), 951 deletions(-) > copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) Heiko, Should I go ahead and make a v5 including the following in my baseline before the refactor? - GPU power doman dependency [1] - USB 3.0 on 5 Plus [2] Do those series look like they'll go in as is? [1] https://lore.kernel.org/linux-rockchip/20241211143044.9550-8-sebastian.reichel@collabora.com/ [2] https://lore.kernel.org/linux-rockchip/20241220161240.109253-1-wens@kernel.org/ Jimmy ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi @ 2024-12-29 19:20 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:20 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:44 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > for Orange Pi 5 Plus/Max/Ultra and AI Max > --- > .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- > ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- > 2 files changed, 77 insertions(+), 951 deletions(-) > copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) Heiko, Should I go ahead and make a v5 including the following in my baseline before the refactor? - GPU power doman dependency [1] - USB 3.0 on 5 Plus [2] Do those series look like they'll go in as is? [1] https://lore.kernel.org/linux-rockchip/20241211143044.9550-8-sebastian.reichel@collabora.com/ [2] https://lore.kernel.org/linux-rockchip/20241220161240.109253-1-wens@kernel.org/ Jimmy _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi 2024-12-29 19:20 ` Jimmy Hon @ 2024-12-31 0:27 ` Heiko Stuebner -1 siblings, 0 replies; 34+ messages in thread From: Heiko Stuebner @ 2024-12-31 0:27 UTC (permalink / raw) To: Jimmy Hon Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip Hi Jimmy, Am Sonntag, 29. Dezember 2024, 20:20:59 CET schrieb Jimmy Hon: > On Sun, Dec 29, 2024 at 12:44 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > > > for Orange Pi 5 Plus/Max/Ultra and AI Max > > --- > > .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- > > ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- > > 2 files changed, 77 insertions(+), 951 deletions(-) > > copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) > > Heiko, > > Should I go ahead and make a v5 including the following in my baseline > before the refactor? > - GPU power doman dependency [1] > - USB 3.0 on 5 Plus [2] > Do those series look like they'll go in as is? If you want to do a v5, you _could_ include te USB thing, because that is DTS only, so on my turf ;-) . You could also drop the RFC + UNTESTED parts for now and resubmit them later. For the GPU power domain I cannot say when this will go in, so better not depend on it. Especially as we don't know when people will return from xmas/new-year vacations. So ideally for the power-domain thing, create a follow-up patch. Heiko ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi @ 2024-12-31 0:27 ` Heiko Stuebner 0 siblings, 0 replies; 34+ messages in thread From: Heiko Stuebner @ 2024-12-31 0:27 UTC (permalink / raw) To: Jimmy Hon Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip Hi Jimmy, Am Sonntag, 29. Dezember 2024, 20:20:59 CET schrieb Jimmy Hon: > On Sun, Dec 29, 2024 at 12:44 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > > > for Orange Pi 5 Plus/Max/Ultra and AI Max > > --- > > .../dts/rockchip/rk3588-orangepi-5-plus.dts | 833 ++---------------- > > ...gepi-5-plus.dts => rk3588-orangepi-5.dtsi} | 195 +--- > > 2 files changed, 77 insertions(+), 951 deletions(-) > > copy arch/arm64/boot/dts/rockchip/{rk3588-orangepi-5-plus.dts => rk3588-orangepi-5.dtsi} (80%) > > Heiko, > > Should I go ahead and make a v5 including the following in my baseline > before the refactor? > - GPU power doman dependency [1] > - USB 3.0 on 5 Plus [2] > Do those series look like they'll go in as is? If you want to do a v5, you _could_ include te USB thing, because that is DTS only, so on my turf ;-) . You could also drop the RFC + UNTESTED parts for now and resubmit them later. For the GPU power domain I cannot say when this will go in, so better not depend on it. Especially as we don't know when people will return from xmas/new-year vacations. So ideally for the power-domain thing, create a follow-up patch. Heiko _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 2/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon, Conor Dooley, Krzysztof Kozlowski Add devicetree binding for the Xunlong Orange Pi 5 Max board. The Orange Pi 5 Max is a single board computer powered by the Rockchip RK3588 similar to the Orange Pi 5 Plus. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 753199a12923..2a141d99c533 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1075,9 +1075,11 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Plus + - description: Xunlong Orange Pi 5 Max/Plus items: - - const: xunlong,orangepi-5-plus + - enum: + - xunlong,orangepi-5-max + - xunlong,orangepi-5-plus - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 2/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon, Conor Dooley, Krzysztof Kozlowski Add devicetree binding for the Xunlong Orange Pi 5 Max board. The Orange Pi 5 Max is a single board computer powered by the Rockchip RK3588 similar to the Orange Pi 5 Plus. Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 753199a12923..2a141d99c533 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1075,9 +1075,11 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Plus + - description: Xunlong Orange Pi 5 Max/Plus items: - - const: xunlong,orangepi-5-plus + - enum: + - xunlong,orangepi-5-max + - xunlong,orangepi-5-plus - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 3/7] arm64: dts: rockchip: Add Orange Pi 5 Max board 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI0 the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. The Orange Pi 5 Max and Orange Pi 5 Ultra are both credit-card sized boards with similar layout. The 5 Max has an extra HDMI0 while the 5 Ultra has a HDMI IN instead. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../rockchip/rk3588-orangepi-5-compact.dtsi | 126 ++++++++++++++++++ .../dts/rockchip/rk3588-orangepi-5-max.dts | 60 +++++++++ .../boot/dts/rockchip/rk3588-orangepi-5.dtsi | 8 ++ 4 files changed, 195 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 86cc418a2255..83ad11650f0b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi new file mode 100644 index 000000000000..205130a3efec --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588-orangepi-5.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; +}; + +&headphone_amp { + /* PHONE_CTL */ + enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; +}; + +&analog_sound { + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,aux-devs = <&headphone_amp>; + simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; +}; + +&fan { + /* FAN_CTL_H */ + pwms = <&pwm9 0 50000 0>; +}; + +&hym8563 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; +}; + +&led_blue_pwm { + /* PWM_LED1 */ + pwms = <&pwm4 0 25000 0>; + status = "okay"; +}; + +&led_green_pwm { + /* PWM_LED2 */ + pwms = <&pwm5 0 25000 0>; +}; + +/* phy2 */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_eth>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int_l: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +&pwm9 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm9m2_pins>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; +}; + +/* pcie eth. not a real regulator. 33VAUX */ +&vcc3v3_pcie_eth { + /* Ethernet_power_en */ + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; +}; + +/* + * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, + * both regulators share the same enable gpio + */ +&vcc5v0_usb20 { + /* USB_HOST_PWREN */ + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts new file mode 100644 index 000000000000..ce44549babf4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3588-orangepi-5-compact.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + +&pinctrl { + + usb { + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index d72afd368d8b..df9b0fd18e24 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -83,6 +83,14 @@ fan: pwm-fan { pwm-leds { compatible = "pwm-leds"; + led_blue_pwm: led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + status = "disabled"; + }; + led_green_pwm: led-2 { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_INDICATOR; -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 3/7] arm64: dts: rockchip: Add Orange Pi 5 Max board @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI0 the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. The Orange Pi 5 Max and Orange Pi 5 Ultra are both credit-card sized boards with similar layout. The 5 Max has an extra HDMI0 while the 5 Ultra has a HDMI IN instead. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../rockchip/rk3588-orangepi-5-compact.dtsi | 126 ++++++++++++++++++ .../dts/rockchip/rk3588-orangepi-5-max.dts | 60 +++++++++ .../boot/dts/rockchip/rk3588-orangepi-5.dtsi | 8 ++ 4 files changed, 195 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 86cc418a2255..83ad11650f0b 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -142,6 +142,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi new file mode 100644 index 000000000000..205130a3efec --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-compact.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588-orangepi-5.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; +}; + +&headphone_amp { + /* PHONE_CTL */ + enable-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; +}; + +&analog_sound { + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,aux-devs = <&headphone_amp>; + simple-audio-card,hp-det-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; + + simple-audio-card,routing = + "Headphones", "LOUT1", + "Headphones", "ROUT1", + "LINPUT1", "Microphone Jack", + "RINPUT1", "Microphone Jack", + "LINPUT2", "Onboard Microphone", + "RINPUT2", "Onboard Microphone"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones"; +}; + +&fan { + /* FAN_CTL_H */ + pwms = <&pwm9 0 50000 0>; +}; + +&hym8563 { + interrupt-parent = <&gpio0>; + interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&rtc_int_l>; +}; + +&led_blue_pwm { + /* PWM_LED1 */ + pwms = <&pwm4 0 25000 0>; + status = "okay"; +}; + +&led_green_pwm { + /* PWM_LED2 */ + pwms = <&pwm5 0 25000 0>; +}; + +/* phy2 */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie_eth>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + rtc_int_l: hym8563-int { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + hp_detect: hp-detect { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4m0_pins>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm5m1_pins>; + status = "okay"; +}; + +&pwm9 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm9m2_pins>; + status = "okay"; +}; + +&sfc { + pinctrl-names = "default"; + pinctrl-0 = <&fspim2_pins>; +}; + +/* pcie eth. not a real regulator. 33VAUX */ +&vcc3v3_pcie_eth { + /* Ethernet_power_en */ + gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; +}; + +/* + * Represents the vcc5v0_usb20 and vcc5v0_usb30 in the schematic, + * both regulators share the same enable gpio + */ +&vcc5v0_usb20 { + /* USB_HOST_PWREN */ + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts new file mode 100644 index 000000000000..ce44549babf4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3588-orangepi-5-compact.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Max"; + compatible = "xunlong,orangepi-5-max", "rockchip,rk3588"; + + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; +}; + +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + +&pinctrl { + + usb { + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi index d72afd368d8b..df9b0fd18e24 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi @@ -83,6 +83,14 @@ fan: pwm-fan { pwm-leds { compatible = "pwm-leds"; + led_blue_pwm: led-1 { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + max-brightness = <255>; + status = "disabled"; + }; + led_green_pwm: led-2 { color = <LED_COLOR_ID_GREEN>; function = LED_FUNCTION_INDICATOR; -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 2a141d99c533..9dd424265826 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1075,11 +1075,12 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Max/Plus + - description: Xunlong Orange Pi 5 Max/Plus/Ultra items: - enum: - xunlong,orangepi-5-max - xunlong,orangepi-5-plus + - xunlong,orangepi-5-ultra - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. The Orange Pi 5 Ultra is a single board computer powered by the Rockchip RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped for HDMI IN. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 2a141d99c533..9dd424265826 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -1075,11 +1075,12 @@ properties: - const: xunlong,orangepi-3b - const: rockchip,rk3566 - - description: Xunlong Orange Pi 5 Max/Plus + - description: Xunlong Orange Pi 5 Max/Plus/Ultra items: - enum: - xunlong,orangepi-5-max - xunlong,orangepi-5-plus + - xunlong,orangepi-5-ultra - const: rockchip,rk3588 - description: Xunlong Orange Pi R1 Plus / LTS -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra 2024-12-29 18:41 ` Jimmy Hon @ 2025-01-02 21:53 ` Rob Herring -1 siblings, 0 replies; 34+ messages in thread From: Rob Herring @ 2025-01-02 21:53 UTC (permalink / raw) To: Jimmy Hon Cc: Heiko Stuebner, Ondrej Jirman, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:41:31PM -0600, Jimmy Hon wrote: > Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. Why RFC? Looks fine to me. However, you should have 'v4' on every patch in the series if this is v4. > > The Orange Pi 5 Ultra is a single board computer powered by the Rockchip > RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped > for HDMI IN. > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > --- > Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index 2a141d99c533..9dd424265826 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -1075,11 +1075,12 @@ properties: > - const: xunlong,orangepi-3b > - const: rockchip,rk3566 > > - - description: Xunlong Orange Pi 5 Max/Plus > + - description: Xunlong Orange Pi 5 Max/Plus/Ultra > items: > - enum: > - xunlong,orangepi-5-max > - xunlong,orangepi-5-plus > + - xunlong,orangepi-5-ultra > - const: rockchip,rk3588 > > - description: Xunlong Orange Pi R1 Plus / LTS > -- > 2.47.1 > ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra @ 2025-01-02 21:53 ` Rob Herring 0 siblings, 0 replies; 34+ messages in thread From: Rob Herring @ 2025-01-02 21:53 UTC (permalink / raw) To: Jimmy Hon Cc: Heiko Stuebner, Ondrej Jirman, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:41:31PM -0600, Jimmy Hon wrote: > Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. Why RFC? Looks fine to me. However, you should have 'v4' on every patch in the series if this is v4. > > The Orange Pi 5 Ultra is a single board computer powered by the Rockchip > RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped > for HDMI IN. > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > --- > Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index 2a141d99c533..9dd424265826 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -1075,11 +1075,12 @@ properties: > - const: xunlong,orangepi-3b > - const: rockchip,rk3566 > > - - description: Xunlong Orange Pi 5 Max/Plus > + - description: Xunlong Orange Pi 5 Max/Plus/Ultra > items: > - enum: > - xunlong,orangepi-5-max > - xunlong,orangepi-5-plus > + - xunlong,orangepi-5-ultra > - const: rockchip,rk3588 > > - description: Xunlong Orange Pi R1 Plus / LTS > -- > 2.47.1 > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra 2025-01-02 21:53 ` Rob Herring @ 2025-01-03 0:18 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2025-01-03 0:18 UTC (permalink / raw) To: Rob Herring Cc: Heiko Stuebner, Ondrej Jirman, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Thu, Jan 2, 2025 at 3:53 PM Rob Herring <robh@kernel.org> wrote: > > On Sun, Dec 29, 2024 at 12:41:31PM -0600, Jimmy Hon wrote: > > Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. > > Why RFC? Looks fine to me. The DTS is only a RFC because the board schematic for the Ultra has not been released yet. So I haven't been able to confirm the pinouts. The 5 Ultra DTS is mainly a preview to show the similarities between the 5 Max and the 5 Ultra. > > However, you should have 'v4' on every patch in the series if this is > v4. Will do. > > > > > The Orange Pi 5 Ultra is a single board computer powered by the Rockchip > > RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped > > for HDMI IN. > > > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > > --- > > Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > > index 2a141d99c533..9dd424265826 100644 > > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > > @@ -1075,11 +1075,12 @@ properties: > > - const: xunlong,orangepi-3b > > - const: rockchip,rk3566 > > > > - - description: Xunlong Orange Pi 5 Max/Plus > > + - description: Xunlong Orange Pi 5 Max/Plus/Ultra > > items: > > - enum: > > - xunlong,orangepi-5-max > > - xunlong,orangepi-5-plus > > + - xunlong,orangepi-5-ultra > > - const: rockchip,rk3588 > > > > - description: Xunlong Orange Pi R1 Plus / LTS > > -- > > 2.47.1 > > ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra @ 2025-01-03 0:18 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2025-01-03 0:18 UTC (permalink / raw) To: Rob Herring Cc: Heiko Stuebner, Ondrej Jirman, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Thu, Jan 2, 2025 at 3:53 PM Rob Herring <robh@kernel.org> wrote: > > On Sun, Dec 29, 2024 at 12:41:31PM -0600, Jimmy Hon wrote: > > Add devicetree binding for the Xunlong Orange Pi 5 Ultra board. > > Why RFC? Looks fine to me. The DTS is only a RFC because the board schematic for the Ultra has not been released yet. So I haven't been able to confirm the pinouts. The 5 Ultra DTS is mainly a preview to show the similarities between the 5 Max and the 5 Ultra. > > However, you should have 'v4' on every patch in the series if this is > v4. Will do. > > > > > The Orange Pi 5 Ultra is a single board computer powered by the Rockchip > > RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped > > for HDMI IN. > > > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > > --- > > Documentation/devicetree/bindings/arm/rockchip.yaml | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > > index 2a141d99c533..9dd424265826 100644 > > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > > @@ -1075,11 +1075,12 @@ properties: > > - const: xunlong,orangepi-3b > > - const: rockchip,rk3566 > > > > - - description: Xunlong Orange Pi 5 Max/Plus > > + - description: Xunlong Orange Pi 5 Max/Plus/Ultra > > items: > > - enum: > > - xunlong,orangepi-5-max > > - xunlong,orangepi-5-plus > > + - xunlong,orangepi-5-ultra > > - const: rockchip,rk3588 > > > > - description: Xunlong Orange Pi R1 Plus / LTS > > -- > > 2.47.1 > > _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* [RFC 5/7] arm64: dts: rockchip: Add Orange Pi 5 Ultra board 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI1 - HDMI IN the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-orangepi-5-ultra.dts | 21 +++++++++++++++++++ 2 files changed, 22 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 83ad11650f0b..7c7560b8fda3 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts new file mode 100644 index 000000000000..41d8d297ce4b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588-orangepi-5-compact.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Ultra"; + compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588"; +}; + +&pinctrl { + + usb { + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [RFC 5/7] arm64: dts: rockchip: Add Orange Pi 5 Ultra board @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon The RK3588 Single Board Computer includes - eMMC - microSD - UART - 2 PWM LEDs - RTC - RTL8125 network controller on PCIe 2.0x1. - M.2 M-key connector routed to PCIe 3.0x4 - PWM controlled heat sink fan. - 2 USB2 ports - lower USB3 port - upper USB3 port with OTG capability - Mali GPU - SPI NOR flash - Mask Rom button - Analog audio using es8388 codec via the headset jack and onboard mic - HDMI1 - HDMI IN the vcc5v0_usb30 regulator shares the same enable gpio pin as the vcc5v0_usb20 regulator. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588-orangepi-5-ultra.dts | 21 +++++++++++++++++++ 2 files changed, 22 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 83ad11650f0b..7c7560b8fda3 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6-lts.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ok3588-c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts new file mode 100644 index 000000000000..41d8d297ce4b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588-orangepi-5-compact.dtsi" + +/ { + model = "Xunlong Orange Pi 5 Ultra"; + compatible = "xunlong,orangepi-5-ultra", "rockchip,rk3588"; +}; + +&pinctrl { + + usb { + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [RFC 5/7] arm64: dts: rockchip: Add Orange Pi 5 Ultra board 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 19:06 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:06 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip The 5 Ultra is an RFC because the board schematics have not been published yet [1]. So I'm basing the differences so far from the marketing image [2] and the vendor kernel DTS [3] This will at least give an example of how the DTS hierarchy is structured. [1] http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-5-Ultra.html [2] http://www.orangepi.org/img/pi5-ultra/11vs12.png [3] https://github.com/orangepi-xunlong/linux-orangepi/blob/orange-pi-6.1-rk35xx/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [RFC 5/7] arm64: dts: rockchip: Add Orange Pi 5 Ultra board @ 2024-12-29 19:06 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:06 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip The 5 Ultra is an RFC because the board schematics have not been published yet [1]. So I'm basing the differences so far from the marketing image [2] and the vendor kernel DTS [3] This will at least give an example of how the DTS hierarchy is structured. [1] http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/service-and-support/Orange-Pi-5-Ultra.html [2] http://www.orangepi.org/img/pi5-ultra/11vs12.png [3] https://github.com/orangepi-xunlong/linux-orangepi/blob/orange-pi-6.1-rk35xx/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-ultra.dts _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Enable the second HDMI output port on the Orange Pi 5 Max Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- .../dts/rockchip/rk3588-orangepi-5-max.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index ce44549babf4..ecfbed2d0059 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -21,6 +21,17 @@ hdmi0_con_in: endpoint { }; }; }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; }; &hdmi0 { @@ -39,10 +50,33 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy_hdmi0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &pinctrl { usb { @@ -58,3 +92,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Enable the second HDMI output port on the Orange Pi 5 Max Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- .../dts/rockchip/rk3588-orangepi-5-max.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts index ce44549babf4..ecfbed2d0059 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts @@ -21,6 +21,17 @@ hdmi0_con_in: endpoint { }; }; }; + + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; }; &hdmi0 { @@ -39,10 +50,33 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + pinctrl-names = "default"; + pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd + &hdmim1_tx1_scl &hdmim1_tx1_sda>; + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy_hdmi0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &pinctrl { usb { @@ -58,3 +92,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 19:12 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:12 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:45 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > Enable the second HDMI output port on the Orange Pi 5 Max > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > --- > .../dts/rockchip/rk3588-orangepi-5-max.dts | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) This is based on the HDMI1 enablement [1]. I tested using Cristian's branch [2]. [1] https://lore.kernel.org/linux-rockchip/20241211-rk3588-hdmi1-v2-0-02cdca22ff68@collabora.com/ [2] https://gitlab.collabora.com/cristicc/linux-next/-/commits/rk3588-hdmi1 ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max @ 2024-12-29 19:12 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 19:12 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip On Sun, Dec 29, 2024 at 12:45 PM Jimmy Hon <honyuenkwun@gmail.com> wrote: > > Enable the second HDMI output port on the Orange Pi 5 Max > > Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> > --- > .../dts/rockchip/rk3588-orangepi-5-max.dts | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) This is based on the HDMI1 enablement [1]. I tested using Cristian's branch [2]. [1] https://lore.kernel.org/linux-rockchip/20241211-rk3588-hdmi1-v2-0-02cdca22ff68@collabora.com/ [2] https://gitlab.collabora.com/cristicc/linux-next/-/commits/rk3588-hdmi1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-30 3:04 ` kernel test robot -1 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2024-12-30 3:04 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-11-honyuenkwun%40gmail.com patch subject: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max config: arm64-randconfig-001-20241230 (https://download.01.org/0day-ci/archive/20241230/202412301002.E6G16osA-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241230/202412301002.E6G16osA-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202412301002.E6G16osA-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:53.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:60.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:66.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:76.1-11 Label or path hdptxphy1 not found FATAL ERROR: Syntax error parsing input tree Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n] Selected by [m]: - DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y] -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max @ 2024-12-30 3:04 ` kernel test robot 0 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2024-12-30 3:04 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-11-honyuenkwun%40gmail.com patch subject: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max config: arm64-randconfig-001-20241230 (https://download.01.org/0day-ci/archive/20241230/202412301002.E6G16osA-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241230/202412301002.E6G16osA-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202412301002.E6G16osA-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:53.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:60.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:66.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:76.1-11 Label or path hdptxphy1 not found FATAL ERROR: Syntax error parsing input tree Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n] Selected by [m]: - DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y] -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max 2024-12-29 18:41 ` Jimmy Hon @ 2025-01-04 7:23 ` kernel test robot -1 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2025-01-04 7:23 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-11-honyuenkwun%40gmail.com patch subject: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max config: arm64-defconfig (https://download.01.org/0day-ci/archive/20250104/202501041500.EeQw8gzk-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250104/202501041500.EeQw8gzk-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202501041500.EeQw8gzk-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:53.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:60.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:66.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:76.1-11 Label or path hdptxphy1 not found >> FATAL ERROR: Syntax error parsing input tree -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max @ 2025-01-04 7:23 ` kernel test robot 0 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2025-01-04 7:23 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-11-honyuenkwun%40gmail.com patch subject: [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max config: arm64-defconfig (https://download.01.org/0day-ci/archive/20250104/202501041500.EeQw8gzk-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250104/202501041500.EeQw8gzk-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202501041500.EeQw8gzk-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:53.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:60.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:66.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-max.dts:76.1-11 Label or path hdptxphy1 not found >> FATAL ERROR: Syntax error parsing input tree -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
* [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-29 18:41 ` Jimmy Hon -1 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Enable the second HDMI output port on the Orange Pi 5 Plus Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- .../dts/rockchip/rk3588-orangepi-5-plus.dts | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index fd49a7c8a381..fd9252d32298 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -26,6 +26,17 @@ hdmi0_con_in: endpoint { }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; @@ -113,10 +124,30 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy_hdmi0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &hym8563 { interrupt-parent = <&gpio0>; interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; @@ -231,3 +262,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; -- 2.47.1 ^ permalink raw reply related [flat|nested] 34+ messages in thread
* [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus @ 2024-12-29 18:41 ` Jimmy Hon 0 siblings, 0 replies; 34+ messages in thread From: Jimmy Hon @ 2024-12-29 18:41 UTC (permalink / raw) To: Heiko Stuebner Cc: Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Enable the second HDMI output port on the Orange Pi 5 Plus Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> --- .../dts/rockchip/rk3588-orangepi-5-plus.dts | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index fd49a7c8a381..fd9252d32298 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -26,6 +26,17 @@ hdmi0_con_in: endpoint { }; }; + hdmi1-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi1_con_in: endpoint { + remote-endpoint = <&hdmi1_out_con>; + }; + }; + }; + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; @@ -113,10 +124,30 @@ hdmi0_out_con: endpoint { }; }; +&hdmi1 { + status = "okay"; +}; + +&hdmi1_in { + hdmi1_in_vp1: endpoint { + remote-endpoint = <&vp1_out_hdmi1>; + }; +}; + +&hdmi1_out { + hdmi1_out_con: endpoint { + remote-endpoint = <&hdmi1_con_in>; + }; +}; + &hdptxphy_hdmi0 { status = "okay"; }; +&hdptxphy1 { + status = "okay"; +}; + &hym8563 { interrupt-parent = <&gpio0>; interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; @@ -231,3 +262,10 @@ vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { remote-endpoint = <&hdmi0_in_vp0>; }; }; + +&vp1 { + vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 { + reg = <ROCKCHIP_VOP2_EP_HDMI1>; + remote-endpoint = <&hdmi1_in_vp1>; + }; +}; -- 2.47.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply related [flat|nested] 34+ messages in thread
* Re: [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus 2024-12-29 18:41 ` Jimmy Hon @ 2024-12-30 5:07 ` kernel test robot -1 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2024-12-30 5:07 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-13-honyuenkwun%40gmail.com patch subject: [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus config: arm64-randconfig-001-20241230 (https://download.01.org/0day-ci/archive/20241230/202412301233.GT87d39d-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241230/202412301233.GT87d39d-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202412301233.GT87d39d-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:127.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:131.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:137.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:147.1-11 Label or path hdptxphy1 not found FATAL ERROR: Syntax error parsing input tree Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n] Selected by [m]: - DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y] -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki ^ permalink raw reply [flat|nested] 34+ messages in thread
* Re: [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus @ 2024-12-30 5:07 ` kernel test robot 0 siblings, 0 replies; 34+ messages in thread From: kernel test robot @ 2024-12-30 5:07 UTC (permalink / raw) To: Jimmy Hon, Heiko Stuebner Cc: oe-kbuild-all, Ondrej Jirman, Rob Herring, Krzysztof Kozlowski, Conor Dooley, devicetree, linux-arm-kernel, linux-rockchip, Jimmy Hon Hi Jimmy, kernel test robot noticed the following build errors: [auto build test ERROR on rockchip/for-next] [also build test ERROR on robh/for-next linus/master v6.13-rc5 next-20241220] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Jimmy-Hon/arm64-dts-rockchip-refactor-common-rk3588-orangepi-5-dtsi/20241230-064740 base: https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git for-next patch link: https://lore.kernel.org/r/20241229184256.1870-13-honyuenkwun%40gmail.com patch subject: [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus config: arm64-randconfig-001-20241230 (https://download.01.org/0day-ci/archive/20241230/202412301233.GT87d39d-lkp@intel.com/config) compiler: aarch64-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241230/202412301233.GT87d39d-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202412301233.GT87d39d-lkp@intel.com/ All errors (new ones prefixed by >>): >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:127.1-7 Label or path hdmi1 not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:131.1-10 Label or path hdmi1_in not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:137.1-11 Label or path hdmi1_out not found >> Error: arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts:147.1-11 Label or path hdptxphy1 not found FATAL ERROR: Syntax error parsing input tree Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n] Selected by [m]: - DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y] -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip ^ permalink raw reply [flat|nested] 34+ messages in thread
end of thread, other threads:[~2025-01-04 7:25 UTC | newest] Thread overview: 34+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-12-29 18:41 [PATCH v4 0/7] arm64: dts: rockchip: Orange Pi 5 Max board Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 18:41 ` [PATCH 1/7] arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 19:20 ` Jimmy Hon 2024-12-29 19:20 ` Jimmy Hon 2024-12-31 0:27 ` Heiko Stuebner 2024-12-31 0:27 ` Heiko Stuebner 2024-12-29 18:41 ` [PATCH 2/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 18:41 ` [PATCH 3/7] arm64: dts: rockchip: Add Orange Pi 5 Max board Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 18:41 ` [RFC 4/7] dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Ultra Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2025-01-02 21:53 ` Rob Herring 2025-01-02 21:53 ` Rob Herring 2025-01-03 0:18 ` Jimmy Hon 2025-01-03 0:18 ` Jimmy Hon 2024-12-29 18:41 ` [RFC 5/7] arm64: dts: rockchip: Add Orange Pi 5 Ultra board Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 19:06 ` Jimmy Hon 2024-12-29 19:06 ` Jimmy Hon 2024-12-29 18:41 ` [PATCH 6/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Max Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-29 19:12 ` Jimmy Hon 2024-12-29 19:12 ` Jimmy Hon 2024-12-30 3:04 ` kernel test robot 2024-12-30 3:04 ` kernel test robot 2025-01-04 7:23 ` kernel test robot 2025-01-04 7:23 ` kernel test robot 2024-12-29 18:41 ` [PATCH UNTESTED 7/7] arm64: dts: rockchip: Enable HDMI1 on Orange Pi 5 Plus Jimmy Hon 2024-12-29 18:41 ` Jimmy Hon 2024-12-30 5:07 ` kernel test robot 2024-12-30 5:07 ` kernel test robot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.
