All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jim Quinlan <james.quinlan@broadcom.com>
To: linux-pci@vger.kernel.org,
	Nicolas Saenz Julienne <nsaenz@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Cyril Brulebois <kibi@debian.org>,
	Stanimir Varbanov <svarbanov@suse.de>,
	bcm-kernel-feedback-list@broadcom.com, jim2101024@gmail.com,
	james.quinlan@broadcom.com
Cc: "Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
	"Rob Herring" <robh@kernel.org>,
	linux-rpi-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
	BCM2711/BCM2835 ARM ARCHITECTURE),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v2 6/8] PCI: brcmstb: Use same constant table for config space access
Date: Fri, 14 Feb 2025 12:39:34 -0500	[thread overview]
Message-ID: <20250214173944.47506-7-james.quinlan@broadcom.com> (raw)
In-Reply-To: <20250214173944.47506-1-james.quinlan@broadcom.com>

The constants EXT_CFG_DATA and EXT_CFG_INDEX vary by SOC. One of the
map_bus methods used these constants, the other used different constants.
Fortunately there was no problem because the SoCs that used the latter
map_bus method all had the same register constants.

Remove the redundant constants and adjust the code to use them.  In
addition, update EXT_CFG_DATA to use the 4k-page based config space access
system, which is what the second map_bus method was already using.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
 drivers/pci/controller/pcie-brcmstb.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index e1059e3365bd..923ac1a03f85 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -150,9 +150,6 @@
 #define  MSI_INT_MASK_SET		0x10
 #define  MSI_INT_MASK_CLR		0x14
 
-#define PCIE_EXT_CFG_DATA				0x8000
-#define PCIE_EXT_CFG_INDEX				0x9000
-
 #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
 #define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
 
@@ -727,8 +724,8 @@ static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
 
 	/* For devices, write to the config space index register */
 	idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
-	writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
-	return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
+	writel(idx, base + IDX_ADDR(pcie));
+	return base + DATA_ADDR(pcie) + PCIE_ECAM_REG(where);
 }
 
 static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
@@ -1711,7 +1708,7 @@ static void brcm_pcie_remove(struct platform_device *pdev)
 static const int pcie_offsets[] = {
 	[RGR1_SW_INIT_1]	= 0x9210,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4204,
 	[PCIE_INTR2_CPU_BASE]	= 0x4300,
 };
@@ -1719,7 +1716,7 @@ static const int pcie_offsets[] = {
 static const int pcie_offsets_bcm7278[] = {
 	[RGR1_SW_INIT_1]	= 0xc010,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4204,
 	[PCIE_INTR2_CPU_BASE]	= 0x4300,
 };
@@ -1733,8 +1730,9 @@ static const int pcie_offsets_bcm7425[] = {
 };
 
 static const int pcie_offsets_bcm7712[] = {
+	[RGR1_SW_INIT_1]	= 0x9210,
 	[EXT_CFG_INDEX]		= 0x9000,
-	[EXT_CFG_DATA]		= 0x9004,
+	[EXT_CFG_DATA]		= 0x8000,
 	[PCIE_HARD_DEBUG]	= 0x4304,
 	[PCIE_INTR2_CPU_BASE]	= 0x4400,
 };
-- 
2.43.0



  parent reply	other threads:[~2025-02-14 18:34 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-14 17:39 [PATCH v2 0/8] PCI: brcmstb: Misc small tweaks and fixes Jim Quinlan
2025-02-14 17:39 ` [PATCH v2 1/8] PCI: brcmstb: Set gen limitation before link, not after Jim Quinlan
2025-02-20 17:27   ` Florian Fainelli
2025-03-04 14:51   ` Manivannan Sadhasivam
2025-02-14 17:39 ` [PATCH v2 2/8] PCI: brcmstb: Write to internal register to change link cap Jim Quinlan
2025-02-20 17:28   ` Florian Fainelli
2025-03-04 14:54   ` Manivannan Sadhasivam
2025-02-14 17:39 ` [PATCH v2 3/8] PCI: brcmstb: Do not assume that reg field starts at LSB Jim Quinlan
2025-02-20 17:29   ` Florian Fainelli
2025-03-04 14:57   ` Manivannan Sadhasivam
2025-02-14 17:39 ` [PATCH v2 4/8] PCI: brcmstb: Fix error path upon call of regulator_bulk_get() Jim Quinlan
2025-02-20 17:29   ` Florian Fainelli
2025-03-03 18:40   ` Bjorn Helgaas
2025-03-04 14:49     ` Jim Quinlan
2025-03-06 15:24       ` Jim Quinlan
2025-03-06 16:24         ` Bjorn Helgaas
2025-03-04 15:03   ` Manivannan Sadhasivam
2025-03-04 16:55     ` Jim Quinlan
2025-03-04 17:07       ` Manivannan Sadhasivam
2025-03-04 17:24         ` Jim Quinlan
2025-03-04 17:32           ` Manivannan Sadhasivam
2025-03-04 17:54             ` Krzysztof Wilczyński
2025-02-14 17:39 ` [PATCH v2 5/8] PCI: brcmstb: Fix potential premature regulator disabling Jim Quinlan
2025-02-20 17:30   ` Florian Fainelli
2025-03-04 15:04   ` Manivannan Sadhasivam
2025-02-14 17:39 ` Jim Quinlan [this message]
2025-02-20 18:14   ` [PATCH v2 6/8] PCI: brcmstb: Use same constant table for config space access Florian Fainelli
2025-03-04 15:08   ` Manivannan Sadhasivam
2025-03-04 16:37     ` Jim Quinlan
2025-03-04 16:58       ` Manivannan Sadhasivam
2025-03-04 17:37         ` Jim Quinlan
2025-03-05  5:47           ` Manivannan Sadhasivam
2025-02-14 17:39 ` [PATCH v2 7/8] PCI: brcmstb: Make two changes in MDIO register fields Jim Quinlan
2025-02-20 18:15   ` Florian Fainelli
2025-03-04 15:09   ` Manivannan Sadhasivam
2025-02-14 17:39 ` [PATCH v2 8/8] PCI: brcmstb: Clarify conversion of irq_domain_set_info() param Jim Quinlan
2025-02-20 18:15   ` Florian Fainelli
2025-03-04 15:10   ` Manivannan Sadhasivam
2025-03-01 14:48 ` [PATCH v2 0/8] PCI: brcmstb: Misc small tweaks and fixes Krzysztof Wilczyński
2025-03-04 16:10   ` Krzysztof Wilczyński

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250214173944.47506-7-james.quinlan@broadcom.com \
    --to=james.quinlan@broadcom.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=jim2101024@gmail.com \
    --cc=kibi@debian.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=nsaenz@kernel.org \
    --cc=robh@kernel.org \
    --cc=svarbanov@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.