From: Yixun Lan <dlan@gentoo.org>
To: Alex Elder <elder@riscstar.com>
Cc: p.zabel@pengutronix.de, mturquette@baylibre.com,
sboyd@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, heylenay@4d2.org, guodong@riscstar.com,
paul.walmsley@sifive.com, palmer@dabbelt.com,
aou@eecs.berkeley.edu, spacemit@lists.linux.dev,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 7/7] riscv: dts: spacemit: add reset support for the K1 SoC
Date: Sat, 22 Mar 2025 16:48:30 +0000 [thread overview]
Message-ID: <20250322164830-GYE11633@gentoo> (raw)
In-Reply-To: <20250321151831.623575-8-elder@riscstar.com>
On 10:18 Fri 21 Mar , Alex Elder wrote:
> Define syscon nodes for the RCPU, RCPU2, and APBC2 SpacemiT CCUS, which
> currently support resets but not clocks in the SpacemiT K1.
>
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 09a9100986b19..f86d1b58c6d35 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -350,6 +350,18 @@ soc {
> dma-noncoherent;
> ranges;
>
> + syscon_rcpu: system-controller@c0880000 {
I'm not sure if syscon_rcpu is good name to go, it's AUDIO Peripherals
in docs, see
7.2 Main CPU Domain Address Mapping
https://developer.spacemit.com/documentation?token=LzJyw97BCipK1dkUygrcbT0NnMg
> + compatible = "spacemit,k1-syscon-rcpu";
> + reg = <0x0 0xc0880000 0x0 0x2048>;
> + #reset-cells = <1>;
> + };
> +
> + syscon_rcpu2: system-controller@c0888000 {
not found this address mapping in above docs link
> + compatible = "spacemit,k1-syscon-rcpu2";
> + reg = <0x0 0xc0888000 0x0 0x28>;
> + #reset-cells = <1>;
> + };
> +
> syscon_apbc: system-control@d4015000 {
> compatible = "spacemit,k1-syscon-apbc";
> reg = <0x0 0xd4015000 0x0 0x1000>;
> @@ -518,6 +530,12 @@ clint: timer@e4000000 {
> <&cpu7_intc 3>, <&cpu7_intc 7>;
> };
>
> + syscon_apbc2: system-controller@f0610000 {
> + compatible = "spacemit,k1-syscon-apbc2";
> + reg = <0x0 0xf0610000 0x0 0x20>;
> + #reset-cells = <1>;
> + };
> +
> sec_uart1: serial@f0612000 {
> compatible = "spacemit,k1-uart", "intel,xscale-uart";
> reg = <0x0 0xf0612000 0x0 0x100>;
> --
> 2.43.0
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
WARNING: multiple messages have this Message-ID (diff)
From: Yixun Lan <dlan@gentoo.org>
To: Alex Elder <elder@riscstar.com>
Cc: p.zabel@pengutronix.de, mturquette@baylibre.com,
sboyd@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, heylenay@4d2.org, guodong@riscstar.com,
paul.walmsley@sifive.com, palmer@dabbelt.com,
aou@eecs.berkeley.edu, spacemit@lists.linux.dev,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND 7/7] riscv: dts: spacemit: add reset support for the K1 SoC
Date: Sat, 22 Mar 2025 16:48:30 +0000 [thread overview]
Message-ID: <20250322164830-GYE11633@gentoo> (raw)
In-Reply-To: <20250321151831.623575-8-elder@riscstar.com>
On 10:18 Fri 21 Mar , Alex Elder wrote:
> Define syscon nodes for the RCPU, RCPU2, and APBC2 SpacemiT CCUS, which
> currently support resets but not clocks in the SpacemiT K1.
>
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> index 09a9100986b19..f86d1b58c6d35 100644
> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -350,6 +350,18 @@ soc {
> dma-noncoherent;
> ranges;
>
> + syscon_rcpu: system-controller@c0880000 {
I'm not sure if syscon_rcpu is good name to go, it's AUDIO Peripherals
in docs, see
7.2 Main CPU Domain Address Mapping
https://developer.spacemit.com/documentation?token=LzJyw97BCipK1dkUygrcbT0NnMg
> + compatible = "spacemit,k1-syscon-rcpu";
> + reg = <0x0 0xc0880000 0x0 0x2048>;
> + #reset-cells = <1>;
> + };
> +
> + syscon_rcpu2: system-controller@c0888000 {
not found this address mapping in above docs link
> + compatible = "spacemit,k1-syscon-rcpu2";
> + reg = <0x0 0xc0888000 0x0 0x28>;
> + #reset-cells = <1>;
> + };
> +
> syscon_apbc: system-control@d4015000 {
> compatible = "spacemit,k1-syscon-apbc";
> reg = <0x0 0xd4015000 0x0 0x1000>;
> @@ -518,6 +530,12 @@ clint: timer@e4000000 {
> <&cpu7_intc 3>, <&cpu7_intc 7>;
> };
>
> + syscon_apbc2: system-controller@f0610000 {
> + compatible = "spacemit,k1-syscon-apbc2";
> + reg = <0x0 0xf0610000 0x0 0x20>;
> + #reset-cells = <1>;
> + };
> +
> sec_uart1: serial@f0612000 {
> compatible = "spacemit,k1-uart", "intel,xscale-uart";
> reg = <0x0 0xf0612000 0x0 0x100>;
> --
> 2.43.0
>
--
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2025-03-22 16:48 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-21 15:18 [PATCH RESEND 0/7] clk: spacemit: add K1 reset support Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-21 15:18 ` [PATCH RESEND 1/7] dt-bindings: soc: spacemit: define spacemit,k1-ccu resets Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-21 20:42 ` Rob Herring
2025-03-21 20:42 ` Rob Herring
2025-03-21 22:25 ` Yixun Lan
2025-03-21 22:25 ` Yixun Lan
2025-03-22 14:27 ` Alex Elder
2025-03-22 14:27 ` Alex Elder
2025-03-22 16:51 ` Yixun Lan
2025-03-22 16:51 ` Yixun Lan
2025-03-21 15:18 ` [PATCH RESEND 2/7] clk: spacemit: define struct k1_ccu_data Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-22 15:50 ` Yixun Lan
2025-03-22 15:50 ` Yixun Lan
2025-03-23 12:43 ` Alex Elder
2025-03-23 12:43 ` Alex Elder
2025-03-23 13:04 ` Yixun Lan
2025-03-23 13:04 ` Yixun Lan
2025-03-23 22:30 ` Alex Elder
2025-03-23 22:30 ` Alex Elder
2025-03-28 17:24 ` Alex Elder
2025-03-28 17:24 ` Alex Elder
2025-03-24 11:53 ` Haylen Chu
2025-03-24 11:53 ` Haylen Chu
2025-03-24 12:17 ` Alex Elder
2025-03-24 12:17 ` Alex Elder
2025-03-21 15:18 ` [PATCH RESEND 3/7] clk: spacemit: add reset controller support Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-22 16:19 ` Yixun Lan
2025-03-22 16:19 ` Yixun Lan
2025-03-23 13:23 ` Alex Elder
2025-03-23 13:23 ` Alex Elder
2025-03-24 6:40 ` Yixun Lan
2025-03-24 6:40 ` Yixun Lan
2025-03-24 12:20 ` Haylen Chu
2025-03-24 12:20 ` Haylen Chu
2025-03-24 12:52 ` Alex Elder
2025-03-24 12:52 ` Alex Elder
2025-03-21 15:18 ` [PATCH RESEND 4/7] clk: spacemit: define existing syscon resets Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-22 16:29 ` Yixun Lan
2025-03-22 16:29 ` Yixun Lan
2025-03-23 13:23 ` Alex Elder
2025-03-23 13:23 ` Alex Elder
2025-03-24 6:24 ` Yixun Lan
2025-03-24 6:24 ` Yixun Lan
2025-03-21 15:18 ` [PATCH RESEND 5/7] clk: spacemit: make clocks optional Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-21 15:18 ` [PATCH RESEND 6/7] clk: spacemit: define new syscons with only resets Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-22 16:42 ` Yixun Lan
2025-03-22 16:42 ` Yixun Lan
2025-03-23 13:23 ` Alex Elder
2025-03-23 13:23 ` Alex Elder
2025-03-24 6:21 ` Yixun Lan
2025-03-24 6:21 ` Yixun Lan
2025-03-28 17:24 ` Alex Elder
2025-03-28 17:24 ` Alex Elder
2025-03-21 15:18 ` [PATCH RESEND 7/7] riscv: dts: spacemit: add reset support for the K1 SoC Alex Elder
2025-03-21 15:18 ` Alex Elder
2025-03-22 16:48 ` Yixun Lan [this message]
2025-03-22 16:48 ` Yixun Lan
2025-03-23 13:23 ` Alex Elder
2025-03-23 13:23 ` Alex Elder
2025-03-24 6:06 ` Yixun Lan
2025-03-24 6:06 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250322164830-GYE11633@gentoo \
--to=dlan@gentoo.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=elder@riscstar.com \
--cc=guodong@riscstar.com \
--cc=heylenay@4d2.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.