All of lore.kernel.org
 help / color / mirror / Atom feed
From: Niklas Neronin <niklas.neronin@linux.intel.com>
To: mathias.nyman@linux.intel.com
Cc: linux-usb@vger.kernel.org,
	Niklas Neronin <niklas.neronin@linux.intel.com>
Subject: [PATCH 01/11] usb: xhci: relocate pre-allocation initialization
Date: Fri, 11 Apr 2025 12:11:45 +0300	[thread overview]
Message-ID: <20250411091155.3386971-2-niklas.neronin@linux.intel.com> (raw)
In-Reply-To: <20250411091155.3386971-1-niklas.neronin@linux.intel.com>

Move pre-allocation initialization from xhci_mem_init() to xhci_init().
This change is part of an ongoing effort to separate initialization from
allocation within the xhci driver. By doing so, it will enable future
patches to re-initialize xhci driver memory without the necessity of fully
recreating it.

Additionally, compliance mode recovery initialization has been adjusted to
only occur after successful memory allocation.

Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
---
 drivers/usb/host/xhci-mem.c | 28 ----------------------------
 drivers/usb/host/xhci.c     | 29 ++++++++++++++++++++++++++---
 2 files changed, 26 insertions(+), 31 deletions(-)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index d698095fc88d..eb07445687bb 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2371,22 +2371,6 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs,
 }
 EXPORT_SYMBOL_GPL(xhci_create_secondary_interrupter);
 
-static void xhci_hcd_page_size(struct xhci_hcd *xhci)
-{
-	u32 page_size;
-
-	page_size = readl(&xhci->op_regs->page_size) & XHCI_PAGE_SIZE_MASK;
-	if (!is_power_of_2(page_size)) {
-		xhci_warn(xhci, "Invalid page size register = 0x%x\n", page_size);
-		/* Fallback to 4K page size, since that's common */
-		page_size = 1;
-	}
-
-	xhci->page_size = page_size << 12;
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "HCD page size set to %iK",
-		       xhci->page_size >> 10);
-}
-
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
 	struct xhci_interrupter *ir;
@@ -2395,15 +2379,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	unsigned int	val, val2;
 	u64		val_64;
 	u32		temp;
-	int		i;
-
-	INIT_LIST_HEAD(&xhci->cmd_list);
-
-	/* init command timeout work */
-	INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
-	init_completion(&xhci->cmd_ring_stop_completion);
-
-	xhci_hcd_page_size(xhci);
 
 	/*
 	 * Program the Number of Device Slots Enabled field in the CONFIG
@@ -2515,9 +2490,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	ir->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
 
-	for (i = 0; i < MAX_HC_SLOTS; i++)
-		xhci->devs[i] = NULL;
-
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
 	if (xhci_setup_port_arrays(xhci, flags))
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0452b8d65832..abc5115a2839 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -460,6 +460,21 @@ static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci)
 	return (xhci->port_status_u0 == ((1 << xhci->usb3_rhub.num_ports) - 1));
 }
 
+static void xhci_hcd_page_size(struct xhci_hcd *xhci)
+{
+	u32 page_size;
+
+	page_size = readl(&xhci->op_regs->page_size) & XHCI_PAGE_SIZE_MASK;
+	if (!is_power_of_2(page_size)) {
+		xhci_warn(xhci, "Invalid page size register = 0x%x\n", page_size);
+		/* Fallback to 4K page size, since that's common */
+		page_size = 1;
+	}
+
+	xhci->page_size = page_size << 12;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "HCD page size set to %iK",
+		       xhci->page_size >> 10);
+}
 
 /*
  * Initialize memory for HCD and xHC (one-time init).
@@ -473,11 +488,18 @@ static int xhci_init(struct usb_hcd *hcd)
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	int retval;
 
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "xhci_init");
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Starting %s", __func__);
 	spin_lock_init(&xhci->lock);
 
+	INIT_LIST_HEAD(&xhci->cmd_list);
+	INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout);
+	init_completion(&xhci->cmd_ring_stop_completion);
+	xhci_hcd_page_size(xhci);
+	memset(xhci->devs, 0, MAX_HC_SLOTS * sizeof(*xhci->devs));
+
 	retval = xhci_mem_init(xhci, GFP_KERNEL);
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
+	if (retval)
+		return retval;
 
 	/* Initializing Compliance Mode Recovery Data If Needed */
 	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
@@ -485,7 +507,8 @@ static int xhci_init(struct usb_hcd *hcd)
 		compliance_mode_recovery_timer_init(xhci);
 	}
 
-	return retval;
+	xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished %s", __func__);
+	return 0;
 }
 
 /*-------------------------------------------------------------------------*/
-- 
2.47.2


  reply	other threads:[~2025-04-11  9:12 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-11  9:11 [PATCH 00/11] usb: xhci: decouple allocation and initialization Niklas Neronin
2025-04-11  9:11 ` Niklas Neronin [this message]
2025-04-11  9:11 ` [PATCH 02/11] usb: xhci: move device slot enabling register write Niklas Neronin
2025-04-11  9:11 ` [PATCH 03/11] usb: xhci: move command ring pointer write Niklas Neronin
2025-04-11  9:11 ` [PATCH 04/11] usb: xhci: refactor xhci_set_cmd_ring_deq() Niklas Neronin
2025-04-11  9:11 ` [PATCH 05/11] usb: xhci: move DCBAA pointer write Niklas Neronin
2025-04-11 15:05   ` Sergey Shtylyov
2025-04-11  9:11 ` [PATCH 06/11] usb: xhci: move doorbell array pointer assignment Niklas Neronin
2025-04-11  9:11 ` [PATCH 07/11] usb: xhci: move enabling of USB 3 device notifications Niklas Neronin
2025-04-11  9:11 ` [PATCH 08/11] usb: xhci: remove error handling from xhci_add_interrupter() Niklas Neronin
2025-04-11  9:11 ` [PATCH 09/11] usb: xhci: move initialization of the primary interrupter Niklas Neronin
2025-04-11  9:11 ` [PATCH 10/11] usb: xhci: add individual allocation checks in xhci_mem_init() Niklas Neronin
2025-04-11  9:11 ` [PATCH 11/11] usb: xhci: cleanup xhci_mem_init() Niklas Neronin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250411091155.3386971-2-niklas.neronin@linux.intel.com \
    --to=niklas.neronin@linux.intel.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.