From: Niklas Neronin <niklas.neronin@linux.intel.com>
To: mathias.nyman@linux.intel.com
Cc: linux-usb@vger.kernel.org, sergei.shtylyov@gmail.com,
Niklas Neronin <niklas.neronin@linux.intel.com>
Subject: [PATCH v2 09/11] usb: xhci: move initialization of the primary interrupter
Date: Wed, 16 Apr 2025 16:45:08 +0300 [thread overview]
Message-ID: <20250416134510.2406543-10-niklas.neronin@linux.intel.com> (raw)
In-Reply-To: <20250416134510.2406543-1-niklas.neronin@linux.intel.com>
Move the primary interrupter (0) initialization from xhci_mem_init() to
xhci_init(). This change requires us to save the allocated interrupter
somewhere before initialization. Therefore, store it in the 'interrupters'
array and rework xhci_add_interrupter() to retrieve the interrupter from
the array.
This is part of the ongoing effort to separate allocation and
initialization.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
---
v2:
* Add the same logic to specific 'intr_num'. Due to rebase.
drivers/usb/host/xhci-mem.c | 22 +++++++++-------------
drivers/usb/host/xhci.c | 4 ++++
drivers/usb/host/xhci.h | 1 +
3 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 75ad30d52507..007536879c24 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2287,14 +2287,13 @@ xhci_alloc_interrupter(struct xhci_hcd *xhci, unsigned int segs, gfp_t flags)
return ir;
}
-static void
-xhci_add_interrupter(struct xhci_hcd *xhci, struct xhci_interrupter *ir,
- unsigned int intr_num)
+void xhci_add_interrupter(struct xhci_hcd *xhci, unsigned int intr_num)
{
+ struct xhci_interrupter *ir;
u64 erst_base;
u32 erst_size;
- xhci->interrupters[intr_num] = ir;
+ ir = xhci->interrupters[intr_num];
ir->intr_num = intr_num;
ir->ir_set = &xhci->run_regs->ir_set[intr_num];
@@ -2338,14 +2337,16 @@ xhci_create_secondary_interrupter(struct usb_hcd *hcd, unsigned int segs,
/* Find available secondary interrupter, interrupter 0 is reserved for primary */
for (i = 1; i < xhci->max_interrupters; i++) {
if (!xhci->interrupters[i]) {
- xhci_add_interrupter(xhci, ir, i);
+ xhci->interrupters[i] = ir;
+ xhci_add_interrupter(xhci, i);
err = 0;
break;
}
}
} else {
if (!xhci->interrupters[intr_num]) {
- xhci_add_interrupter(xhci, ir, intr_num);
+ xhci->interrupters[intr_num] = ir;
+ xhci_add_interrupter(xhci, intr_num);
err = 0;
}
}
@@ -2372,7 +2373,6 @@ EXPORT_SYMBOL_GPL(xhci_create_secondary_interrupter);
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
- struct xhci_interrupter *ir;
struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
dma_addr_t dma;
@@ -2447,14 +2447,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->interrupters = kcalloc_node(xhci->max_interrupters, sizeof(*xhci->interrupters),
flags, dev_to_node(dev));
- ir = xhci_alloc_interrupter(xhci, 0, flags);
- if (!ir)
+ xhci->interrupters[0] = xhci_alloc_interrupter(xhci, 0, flags);
+ if (!xhci->interrupters[0])
goto fail;
- xhci_add_interrupter(xhci, ir, 0);
-
- ir->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
-
if (scratchpad_alloc(xhci, flags))
goto fail;
if (xhci_setup_port_arrays(xhci, flags))
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 18d8637773cb..1cc58d10776d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -578,6 +578,10 @@ static int xhci_init(struct usb_hcd *hcd)
/* Set USB 3.0 device notifications for function remote wake */
xhci_set_dev_notifications(xhci);
+ /* Initialize the Primary interrupter */
+ xhci_add_interrupter(xhci, 0);
+ xhci->interrupters[0]->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX;
+
/* Initializing Compliance Mode Recovery Data If Needed */
if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index c05c3eab005b..97da9f2853f3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1945,6 +1945,7 @@ void xhci_process_cancelled_tds(struct xhci_virt_ep *ep);
void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
struct xhci_interrupter *ir,
bool clear_ehb);
+void xhci_add_interrupter(struct xhci_hcd *xhci, unsigned int intr_num);
/* xHCI roothub code */
void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
--
2.47.2
next prev parent reply other threads:[~2025-04-16 13:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-16 13:44 [PATCH v2 00/11] usb: xhci: decouple allocation and initialization Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 01/11] usb: xhci: relocate pre-allocation initialization Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 02/11] usb: xhci: move device slot enabling register write Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 03/11] usb: xhci: move command ring pointer write Niklas Neronin
2025-04-20 17:30 ` Sergey Shtylyov
2025-04-16 13:45 ` [PATCH v2 04/11] usb: xhci: refactor xhci_set_cmd_ring_deq() Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 05/11] usb: xhci: move DCBAA pointer write Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 06/11] usb: xhci: move doorbell array pointer assignment Niklas Neronin
2025-04-20 17:16 ` Sergey Shtylyov
2025-04-16 13:45 ` [PATCH v2 07/11] usb: xhci: move enabling of USB 3 device notifications Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 08/11] usb: xhci: remove error handling from xhci_add_interrupter() Niklas Neronin
2025-04-16 13:45 ` Niklas Neronin [this message]
2025-04-16 13:45 ` [PATCH v2 10/11] usb: xhci: add individual allocation checks in xhci_mem_init() Niklas Neronin
2025-04-16 13:45 ` [PATCH v2 11/11] usb: xhci: cleanup xhci_mem_init() Niklas Neronin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250416134510.2406543-10-niklas.neronin@linux.intel.com \
--to=niklas.neronin@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=sergei.shtylyov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.