[net-next, PATCH v2] net: phy: mediatek: do not require syscon compatible for pio property

[Frank Wunderlich <linux@fw-web.de>]

From: Frank Wunderlich <frank-w@public-files.de>

Current implementation requires syscon compatible for pio property
which is used for driving the switch leds on mt7988.

Replace syscon_regmap_lookup_by_phandle with of_parse_phandle and
device_node_to_regmap to get the regmap already assigned by pinctrl
driver.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---

v2:
- out of RFC

---
 drivers/net/phy/mediatek/mtk-ge-soc.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/mediatek/mtk-ge-soc.c b/drivers/net/phy/mediatek/mtk-ge-soc.c
index 175cf5239bba..21975ef946d5 100644
--- a/drivers/net/phy/mediatek/mtk-ge-soc.c
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -7,6 +7,7 @@
 #include <linux/pinctrl/consumer.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
+#include <linux/of.h>
 
 #include "../phylib.h"
 #include "mtk.h"
@@ -1319,6 +1320,7 @@ static int mt7988_phy_probe_shared(struct phy_device *phydev)
 {
 	struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
 	struct mtk_socphy_shared *shared = phy_package_get_priv(phydev);
+	struct device_node *pio_np;
 	struct regmap *regmap;
 	u32 reg;
 	int ret;
@@ -1336,7 +1338,13 @@ static int mt7988_phy_probe_shared(struct phy_device *phydev)
 	 * The 4 bits in TPBANK0 are kept as package shared data and are used to
 	 * set LED polarity for each of the LED0.
 	 */
-	regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
+	pio_np = of_parse_phandle(np, "mediatek,pio", 0);
+	if (!pio_np)
+		return -ENODEV;
+
+	regmap = device_node_to_regmap(pio_np);
+	of_node_put(pio_np);
+
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-- 
2.43.0