Re: [PATCH v4 3/4] usb: dwc3: add generic driver to support flattened DT

[Thinh Nguyen <Thinh.Nguyen@synopsys.com>]

On Mon, May 26, 2025, Ze Huang wrote:
> To support flattened dwc3 dt model and drop the glue layer, introduce the
> `dwc3-generic` driver. This enables direct binding of the DWC3 core driver
> and offers an alternative to the existing glue driver `dwc3-of-simple`.
> 
> Signed-off-by: Ze Huang <huangze@whut.edu.cn>
> ---
>  drivers/usb/dwc3/Kconfig             |   9 ++
>  drivers/usb/dwc3/Makefile            |   1 +
>  drivers/usb/dwc3/dwc3-generic-plat.c | 189 +++++++++++++++++++++++++++++++++++
>  3 files changed, 199 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 310d182e10b50b253d7e5a51674806e6ec442a2a..082627f39c9726ee4e0c5f966c5bc454f5541c9a 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -118,6 +118,15 @@ config USB_DWC3_OF_SIMPLE
>  	  Currently supports Xilinx and Qualcomm DWC USB3 IP.
>  	  Say 'Y' or 'M' if you have one such device.
>  
> +config USB_DWC3_GENERIC_PLAT
> +       tristate "DWC3 Generic Platform Driver"
> +       depends on OF && COMMON_CLK
> +       default USB_DWC3
> +       help
> +         Support USB3 functionality in simple SoC integrations.
> +         Currently supports SpacemiT DWC USB3 IP.
> +         Say 'Y' or 'M' if you have one such device.
> +
>  config USB_DWC3_ST
>  	tristate "STMicroelectronics Platforms"
>  	depends on (ARCH_STI || COMPILE_TEST) && OF
> diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
> index 830e6c9e5fe073c1f662ce34b6a4a2da34c407a2..96469e48ff9d189cc8d0b65e65424eae2158bcfe 100644
> --- a/drivers/usb/dwc3/Makefile
> +++ b/drivers/usb/dwc3/Makefile
> @@ -57,3 +57,4 @@ obj-$(CONFIG_USB_DWC3_IMX8MP)		+= dwc3-imx8mp.o
>  obj-$(CONFIG_USB_DWC3_XILINX)		+= dwc3-xilinx.o
>  obj-$(CONFIG_USB_DWC3_OCTEON)		+= dwc3-octeon.o
>  obj-$(CONFIG_USB_DWC3_RTK)		+= dwc3-rtk.o
> +obj-$(CONFIG_USB_DWC3_GENERIC_PLAT)	+= dwc3-generic-plat.o
> diff --git a/drivers/usb/dwc3/dwc3-generic-plat.c b/drivers/usb/dwc3/dwc3-generic-plat.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..8ff4626d324c40ecb52e115832c803fed7d38354
> --- /dev/null
> +++ b/drivers/usb/dwc3/dwc3-generic-plat.c
> @@ -0,0 +1,189 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * dwc3-generic-plat.c - DesignWare USB3 generic platform driver
> + *
> + * Copyright (C) 2025 Ze Huang <huangze9015@gmail.com>
> + *
> + * Inspired by dwc3-qcom.c and dwc3-of-simple.c
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include "glue.h"
> +
> +struct dwc3_generic {
> +	struct device		*dev;
> +	struct dwc3		dwc;
> +	struct clk_bulk_data	*clks;
> +	int			num_clocks;
> +	struct reset_control	*resets;
> +};
> +
> +static int dwc3_generic_probe(struct platform_device *pdev)
> +{
> +	struct dwc3_probe_data probe_data = {};
> +	struct device *dev = &pdev->dev;
> +	struct dwc3_generic *dwc3;
> +	struct resource *res;
> +	int ret;
> +
> +	dwc3 = devm_kzalloc(dev, sizeof(*dwc3), GFP_KERNEL);
> +	if (!dwc3)
> +		return -ENOMEM;
> +
> +	dwc3->dev = dev;
> +
> +	platform_set_drvdata(pdev, dwc3);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!res) {
> +		dev_err(&pdev->dev, "missing memory resource\n");
> +		return -ENODEV;
> +	}
> +
> +	dwc3->resets = of_reset_control_array_get_optional_exclusive(dev->of_node);
> +	if (IS_ERR(dwc3->resets))
> +		return dev_err_probe(dev, PTR_ERR(dwc3->resets), "failed to get reset\n");
> +
> +	ret = reset_control_assert(dwc3->resets);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to assert reset\n");
> +
> +	usleep_range(10, 1000);
> +
> +	ret = reset_control_deassert(dwc3->resets);
> +	if (ret) {
> +		dev_err(dev, "failed to deassert reset\n");
> +		goto reset_assert;
> +	}
> +
> +	ret = clk_bulk_get_all(dwc3->dev, &dwc3->clks);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to get clocks\n");
> +		goto reset_assert;
> +	}
> +
> +	dwc3->num_clocks = ret;
> +
> +	ret = clk_bulk_prepare_enable(dwc3->num_clocks, dwc3->clks);
> +	if (ret) {
> +		dev_err(dev, "failed to enable clocks\n");
> +		goto reset_assert;
> +	}
> +
> +	dwc3->dwc.dev = dev;
> +	probe_data.dwc = &dwc3->dwc;
> +	probe_data.res = res;
> +	probe_data.ignore_clocks_and_resets = true;
> +	ret = dwc3_core_probe(&probe_data);
> +	if (ret)  {
> +		dev_err(dev, "failed to register DWC3 Core\n");
> +		goto clk_disable;
> +	}
> +
> +	return 0;
> +
> +clk_disable:
> +	clk_bulk_disable_unprepare(dwc3->num_clocks, dwc3->clks);
> +	clk_bulk_put_all(dwc3->num_clocks, dwc3->clks);
> +
> +reset_assert:
> +	reset_control_assert(dwc3->resets);
> +
> +	return ret;
> +}
> +
> +static void dwc3_generic_remove(struct platform_device *pdev)
> +{
> +	struct dwc3_generic *dwc3 = platform_get_drvdata(pdev);
> +
> +	dwc3_core_remove(&dwc3->dwc);
> +
> +	clk_bulk_disable_unprepare(dwc3->num_clocks, dwc3->clks);
> +	clk_bulk_put_all(dwc3->num_clocks, dwc3->clks);
> +
> +	reset_control_assert(dwc3->resets);
> +}
> +
> +static int __maybe_unused dwc3_generic_suspend(struct device *dev)

We shouldn't need __maybe_unused attr with the new PM macros.

> +{
> +	struct dwc3_generic *dwc3 = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = dwc3_pm_suspend(&dwc3->dwc);
> +	if (ret)
> +		return ret;
> +
> +	clk_bulk_disable_unprepare(dwc3->num_clocks, dwc3->clks);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused dwc3_generic_resume(struct device *dev)
> +{
> +	struct dwc3_generic *dwc3 = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(dwc3->num_clocks, dwc3->clks);
> +	if (ret)
> +		return ret;
> +
> +	ret = dwc3_pm_resume(&dwc3->dwc);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused dwc3_generic_runtime_suspend(struct device *dev)
> +{
> +	struct dwc3_generic *dwc3 = dev_get_drvdata(dev);
> +
> +	return dwc3_runtime_suspend(&dwc3->dwc);
> +}
> +
> +static int __maybe_unused dwc3_generic_runtime_resume(struct device *dev)
> +{
> +	struct dwc3_generic *dwc3 = dev_get_drvdata(dev);
> +
> +	return dwc3_runtime_resume(&dwc3->dwc);
> +}
> +
> +static int __maybe_unused dwc3_generic_runtime_idle(struct device *dev)
> +{
> +	struct dwc3_generic *dwc3 = dev_get_drvdata(dev);
> +
> +	return dwc3_runtime_idle(&dwc3->dwc);
> +}
> +
> +static const struct dev_pm_ops dwc3_generic_dev_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(dwc3_generic_suspend, dwc3_generic_resume)
> +	SET_RUNTIME_PM_OPS(dwc3_generic_runtime_suspend, dwc3_generic_runtime_resume,
> +			   dwc3_generic_runtime_idle)
> +};
> +
> +static const struct of_device_id dwc3_generic_of_match[] = {
> +	{ .compatible = "spacemit,k1-dwc3", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, dwc3_generic_of_match);
> +
> +static struct platform_driver dwc3_generic_driver = {
> +	.probe		= dwc3_generic_probe,
> +	.remove		= dwc3_generic_remove,
> +	.driver		= {
> +		.name	= "dwc3-generic-plat",
> +		.of_match_table = dwc3_generic_of_match,
> +#ifdef CONFIG_PM_SLEEP

Use the new pm_ptr/pm_sleep_ptr.

Thanks,
Thinh

> +		.pm	= &dwc3_generic_dev_pm_ops,
> +#endif /* CONFIG_PM_SLEEP */
> +	},
> +};
> +module_platform_driver(dwc3_generic_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("DesignWare USB3 generic platform driver");
> 
> -- 
> 2.49.0
> 
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv