All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anup Patel <apatel@ventanamicro.com>
To: Atish Patra <atish.patra@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Alexandre Ghiti <alex@ghiti.fr>,
	Andrew Jones <ajones@ventanamicro.com>,
	Anup Patel <anup@brainfault.org>,
	kvm@vger.kernel.org, kvm-riscv@lists.infradead.org,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>
Subject: [PATCH v3 07/12] RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
Date: Wed, 18 Jun 2025 17:05:27 +0530	[thread overview]
Message-ID: <20250618113532.471448-8-apatel@ventanamicro.com> (raw)
In-Reply-To: <20250618113532.471448-1-apatel@ventanamicro.com>

The H-extension CSRs accessed by kvm_riscv_vcpu_trap_redirect() will
trap when KVM RISC-V is running as Guest/VM hence remove these traps
by using ncsr_xyz() instead of csr_xyz().

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/kvm/vcpu_exit.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/kvm/vcpu_exit.c b/arch/riscv/kvm/vcpu_exit.c
index 6e0c18412795..85c43c83e3b9 100644
--- a/arch/riscv/kvm/vcpu_exit.c
+++ b/arch/riscv/kvm/vcpu_exit.c
@@ -9,6 +9,7 @@
 #include <linux/kvm_host.h>
 #include <asm/csr.h>
 #include <asm/insn-def.h>
+#include <asm/kvm_nacl.h>
 
 static int gstage_page_fault(struct kvm_vcpu *vcpu, struct kvm_run *run,
 			     struct kvm_cpu_trap *trap)
@@ -135,7 +136,7 @@ unsigned long kvm_riscv_vcpu_unpriv_read(struct kvm_vcpu *vcpu,
 void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 				  struct kvm_cpu_trap *trap)
 {
-	unsigned long vsstatus = csr_read(CSR_VSSTATUS);
+	unsigned long vsstatus = ncsr_read(CSR_VSSTATUS);
 
 	/* Change Guest SSTATUS.SPP bit */
 	vsstatus &= ~SR_SPP;
@@ -151,15 +152,15 @@ void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 	vsstatus &= ~SR_SIE;
 
 	/* Update Guest SSTATUS */
-	csr_write(CSR_VSSTATUS, vsstatus);
+	ncsr_write(CSR_VSSTATUS, vsstatus);
 
 	/* Update Guest SCAUSE, STVAL, and SEPC */
-	csr_write(CSR_VSCAUSE, trap->scause);
-	csr_write(CSR_VSTVAL, trap->stval);
-	csr_write(CSR_VSEPC, trap->sepc);
+	ncsr_write(CSR_VSCAUSE, trap->scause);
+	ncsr_write(CSR_VSTVAL, trap->stval);
+	ncsr_write(CSR_VSEPC, trap->sepc);
 
 	/* Set Guest PC to Guest exception vector */
-	vcpu->arch.guest_context.sepc = csr_read(CSR_VSTVEC);
+	vcpu->arch.guest_context.sepc = ncsr_read(CSR_VSTVEC);
 
 	/* Set Guest privilege mode to supervisor */
 	vcpu->arch.guest_context.sstatus |= SR_SPP;
-- 
2.43.0


-- 
kvm-riscv mailing list
kvm-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kvm-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Atish Patra <atish.patra@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Alexandre Ghiti <alex@ghiti.fr>,
	Andrew Jones <ajones@ventanamicro.com>,
	Anup Patel <anup@brainfault.org>,
	kvm@vger.kernel.org, kvm-riscv@lists.infradead.org,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>
Subject: [PATCH v3 07/12] RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
Date: Wed, 18 Jun 2025 17:05:27 +0530	[thread overview]
Message-ID: <20250618113532.471448-8-apatel@ventanamicro.com> (raw)
In-Reply-To: <20250618113532.471448-1-apatel@ventanamicro.com>

The H-extension CSRs accessed by kvm_riscv_vcpu_trap_redirect() will
trap when KVM RISC-V is running as Guest/VM hence remove these traps
by using ncsr_xyz() instead of csr_xyz().

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/kvm/vcpu_exit.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/kvm/vcpu_exit.c b/arch/riscv/kvm/vcpu_exit.c
index 6e0c18412795..85c43c83e3b9 100644
--- a/arch/riscv/kvm/vcpu_exit.c
+++ b/arch/riscv/kvm/vcpu_exit.c
@@ -9,6 +9,7 @@
 #include <linux/kvm_host.h>
 #include <asm/csr.h>
 #include <asm/insn-def.h>
+#include <asm/kvm_nacl.h>
 
 static int gstage_page_fault(struct kvm_vcpu *vcpu, struct kvm_run *run,
 			     struct kvm_cpu_trap *trap)
@@ -135,7 +136,7 @@ unsigned long kvm_riscv_vcpu_unpriv_read(struct kvm_vcpu *vcpu,
 void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 				  struct kvm_cpu_trap *trap)
 {
-	unsigned long vsstatus = csr_read(CSR_VSSTATUS);
+	unsigned long vsstatus = ncsr_read(CSR_VSSTATUS);
 
 	/* Change Guest SSTATUS.SPP bit */
 	vsstatus &= ~SR_SPP;
@@ -151,15 +152,15 @@ void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 	vsstatus &= ~SR_SIE;
 
 	/* Update Guest SSTATUS */
-	csr_write(CSR_VSSTATUS, vsstatus);
+	ncsr_write(CSR_VSSTATUS, vsstatus);
 
 	/* Update Guest SCAUSE, STVAL, and SEPC */
-	csr_write(CSR_VSCAUSE, trap->scause);
-	csr_write(CSR_VSTVAL, trap->stval);
-	csr_write(CSR_VSEPC, trap->sepc);
+	ncsr_write(CSR_VSCAUSE, trap->scause);
+	ncsr_write(CSR_VSTVAL, trap->stval);
+	ncsr_write(CSR_VSEPC, trap->sepc);
 
 	/* Set Guest PC to Guest exception vector */
-	vcpu->arch.guest_context.sepc = csr_read(CSR_VSTVEC);
+	vcpu->arch.guest_context.sepc = ncsr_read(CSR_VSTVEC);
 
 	/* Set Guest privilege mode to supervisor */
 	vcpu->arch.guest_context.sstatus |= SR_SPP;
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: Anup Patel <apatel@ventanamicro.com>
To: Atish Patra <atish.patra@linux.dev>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Alexandre Ghiti <alex@ghiti.fr>,
	Andrew Jones <ajones@ventanamicro.com>,
	Anup Patel <anup@brainfault.org>,
	kvm@vger.kernel.org, kvm-riscv@lists.infradead.org,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Anup Patel <apatel@ventanamicro.com>,
	Atish Patra <atishp@rivosinc.com>
Subject: [PATCH v3 07/12] RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect()
Date: Wed, 18 Jun 2025 17:05:27 +0530	[thread overview]
Message-ID: <20250618113532.471448-8-apatel@ventanamicro.com> (raw)
In-Reply-To: <20250618113532.471448-1-apatel@ventanamicro.com>

The H-extension CSRs accessed by kvm_riscv_vcpu_trap_redirect() will
trap when KVM RISC-V is running as Guest/VM hence remove these traps
by using ncsr_xyz() instead of csr_xyz().

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/kvm/vcpu_exit.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/riscv/kvm/vcpu_exit.c b/arch/riscv/kvm/vcpu_exit.c
index 6e0c18412795..85c43c83e3b9 100644
--- a/arch/riscv/kvm/vcpu_exit.c
+++ b/arch/riscv/kvm/vcpu_exit.c
@@ -9,6 +9,7 @@
 #include <linux/kvm_host.h>
 #include <asm/csr.h>
 #include <asm/insn-def.h>
+#include <asm/kvm_nacl.h>
 
 static int gstage_page_fault(struct kvm_vcpu *vcpu, struct kvm_run *run,
 			     struct kvm_cpu_trap *trap)
@@ -135,7 +136,7 @@ unsigned long kvm_riscv_vcpu_unpriv_read(struct kvm_vcpu *vcpu,
 void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 				  struct kvm_cpu_trap *trap)
 {
-	unsigned long vsstatus = csr_read(CSR_VSSTATUS);
+	unsigned long vsstatus = ncsr_read(CSR_VSSTATUS);
 
 	/* Change Guest SSTATUS.SPP bit */
 	vsstatus &= ~SR_SPP;
@@ -151,15 +152,15 @@ void kvm_riscv_vcpu_trap_redirect(struct kvm_vcpu *vcpu,
 	vsstatus &= ~SR_SIE;
 
 	/* Update Guest SSTATUS */
-	csr_write(CSR_VSSTATUS, vsstatus);
+	ncsr_write(CSR_VSSTATUS, vsstatus);
 
 	/* Update Guest SCAUSE, STVAL, and SEPC */
-	csr_write(CSR_VSCAUSE, trap->scause);
-	csr_write(CSR_VSTVAL, trap->stval);
-	csr_write(CSR_VSEPC, trap->sepc);
+	ncsr_write(CSR_VSCAUSE, trap->scause);
+	ncsr_write(CSR_VSTVAL, trap->stval);
+	ncsr_write(CSR_VSEPC, trap->sepc);
 
 	/* Set Guest PC to Guest exception vector */
-	vcpu->arch.guest_context.sepc = csr_read(CSR_VSTVEC);
+	vcpu->arch.guest_context.sepc = ncsr_read(CSR_VSTVEC);
 
 	/* Set Guest privilege mode to supervisor */
 	vcpu->arch.guest_context.sstatus |= SR_SPP;
-- 
2.43.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2025-06-18 13:08 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-18 11:35 [PATCH v3 00/12] MMU related improvements for KVM RISC-V Anup Patel
2025-06-18 11:35 ` Anup Patel
2025-06-18 11:35 ` Anup Patel
2025-06-18 11:35 ` [PATCH v3 01/12] RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-24  3:32   ` Atish Patra
2025-06-24  3:32     ` Atish Patra
2025-06-24  3:32     ` Atish Patra
2025-06-25  6:48   ` Nutty Liu
2025-06-25  6:48     ` Nutty Liu
2025-06-25  6:48     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 02/12] RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-24  3:35   ` Atish Patra
2025-06-24  3:35     ` Atish Patra
2025-06-24  3:35     ` Atish Patra
2025-06-25  6:50   ` Nutty Liu
2025-06-25  6:50     ` Nutty Liu
2025-06-25  6:50     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 03/12] RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35 ` [PATCH v3 04/12] RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:35   ` Nutty Liu
2025-06-25  7:35     ` Nutty Liu
2025-06-25  7:35     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 05/12] RISC-V: KVM: Don't flush TLB when PTE is unchanged Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:38   ` Nutty Liu
2025-06-25  7:38     ` Nutty Liu
2025-06-25  7:38     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 06/12] RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:39   ` Nutty Liu
2025-06-25  7:39     ` Nutty Liu
2025-06-25  7:39     ` Nutty Liu
2025-06-18 11:35 ` Anup Patel [this message]
2025-06-18 11:35   ` [PATCH v3 07/12] RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:39   ` Nutty Liu
2025-06-25  7:39     ` Nutty Liu
2025-06-25  7:39     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 08/12] RISC-V: KVM: Factor-out MMU related declarations into separate headers Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:40   ` Nutty Liu
2025-06-25  7:40     ` Nutty Liu
2025-06-25  7:40     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 09/12] RISC-V: KVM: Introduce struct kvm_gstage_mapping Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:43   ` Nutty Liu
2025-06-25  7:43     ` Nutty Liu
2025-06-25  7:43     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 10/12] RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:55   ` Nutty Liu
2025-06-25  7:55     ` Nutty Liu
2025-06-25  7:55     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 11/12] RISC-V: KVM: Factor-out g-stage page table management Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:57   ` Nutty Liu
2025-06-25  7:57     ` Nutty Liu
2025-06-25  7:57     ` Nutty Liu
2025-06-18 11:35 ` [PATCH v3 12/12] RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-18 11:35   ` Anup Patel
2025-06-25  7:58   ` Nutty Liu
2025-06-25  7:58     ` Nutty Liu
2025-06-25  7:58     ` Nutty Liu
2025-06-24  6:16 ` [PATCH v3 00/12] MMU related improvements for KVM RISC-V Anup Patel
2025-06-24  6:16   ` Anup Patel
2025-06-24  6:16   ` Anup Patel
2025-06-25  7:59 ` Atish Patra
2025-06-25  7:59   ` Atish Patra
2025-06-25  7:59   ` Atish Patra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250618113532.471448-8-apatel@ventanamicro.com \
    --to=apatel@ventanamicro.com \
    --cc=ajones@ventanamicro.com \
    --cc=alex@ghiti.fr \
    --cc=anup@brainfault.org \
    --cc=atish.patra@linux.dev \
    --cc=atishp@rivosinc.com \
    --cc=kvm-riscv@lists.infradead.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.