Re: [PATCH 3/7] dt-bindings: pci: Add document for ASPEED PCIe RC

[Rob Herring <robh@kernel.org>]

On Fri, Jun 13, 2025 at 11:29:57AM +0800, Jacky Chou wrote:
> Add device tree binding documentation for the ASPEED PCIe Root Complex
> controller. This binding describes the required and optional properties
> for configuring the PCIe RC node, including support for syscon phandles,
> MSI, clocks, resets, and interrupt mapping. The schema enforces strict
> property validation and provides a comprehensive example for reference.
> 
> Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
> ---
>  .../devicetree/bindings/pci/aspeed-pcie.yaml  | 159 ++++++++++++++++++
>  1 file changed, 159 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/aspeed-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/aspeed-pcie.yaml b/Documentation/devicetree/bindings/pci/aspeed-pcie.yaml
> new file mode 100644
> index 000000000000..5b50a9e2d472
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/aspeed-pcie.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/aspeed-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ASPEED PCIe Root Complex Controller
> +
> +maintainers:
> +  - Jacky Chou <jacky_chou@aspeedtech.com>
> +
> +description: |
> +  Device tree binding for the ASPEED PCIe Root Complex controller.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2600-pcie
> +      - aspeed,ast2700-pcie
> +
> +  device_type:
> +    const: pci
> +
> +  reg:
> +    maxItems: 1
> +
> +  ranges:
> +    minItems: 2
> +    maxItems: 2
> +
> +  interrupts:
> +    description: IntX and MSI interrupt
> +
> +  resets:
> +    items:
> +      - description: Module reset
> +      - description: PCIe PERST
> +
> +  reset-names:
> +    items:
> +      - const: h2x
> +      - const: perst
> +
> +  msi-parent: true
> +
> +  msi_address:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: MSI address

What's this for?

> +
> +  aspeed,ahbc:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle to ASPEED AHBC syscon.
> +
> +  aspeed,pciecfg:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle to ASPEED PCIe configuration syscon.
> +
> +  aspeed,pciephy:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Phandle to ASPEED PCIe PHY syscon.

Use the phy binding and make the phy control a separate driver.

Rob