[PATCH v8 5/5] iio: mcp9600: Add support for thermocouple-type

[Ben Collins <bcollins@watter.com>]

dt-bindings documentation for this driver claims to support
thermocouple-type, but the driver does not actually make use of
the property.

Implement usage of the property to configure the chip for the
selected thermocouple-type.

Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
---
 drivers/iio/temperature/mcp9600.c | 71 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 70 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/temperature/mcp9600.c b/drivers/iio/temperature/mcp9600.c
index 51ed780ea72fa552884cf170def1450ce017b197..aa42c2b1a369edbd36e0d6d6d1738ed0069fd990 100644
--- a/drivers/iio/temperature/mcp9600.c
+++ b/drivers/iio/temperature/mcp9600.c
@@ -22,11 +22,15 @@
 #include <linux/iio/events.h>
 #include <linux/iio/iio.h>
 
+#include <dt-bindings/iio/temperature/thermocouple.h>
+
 /* MCP9600 registers */
 #define MCP9600_HOT_JUNCTION		0x00
 #define MCP9600_COLD_JUNCTION		0x02
 #define MCP9600_STATUS			0x04
 #define MCP9600_STATUS_ALERT(x)		BIT(x)
+#define MCP9600_SENSOR_CFG		0x05
+#define MCP9600_SENSOR_TYPE_MASK	GENMASK(6, 4)
 #define MCP9600_ALERT_CFG1		0x08
 #define MCP9600_ALERT_CFG(x)		(MCP9600_ALERT_CFG1 + (x - 1))
 #define MCP9600_ALERT_CFG_ENABLE	BIT(0)
@@ -66,6 +70,30 @@ static const char * const mcp9600_alert_name[MCP9600_ALERT_COUNT] = {
 	[MCP9600_ALERT4] = "alert4",
 };
 
+/* Map between dt-bindings enum and the chip's type value */
+static const unsigned int mcp9600_type_map[] = {
+	[THERMOCOUPLE_TYPE_K] = 0,
+	[THERMOCOUPLE_TYPE_J] = 1,
+	[THERMOCOUPLE_TYPE_T] = 2,
+	[THERMOCOUPLE_TYPE_N] = 3,
+	[THERMOCOUPLE_TYPE_S] = 4,
+	[THERMOCOUPLE_TYPE_E] = 5,
+	[THERMOCOUPLE_TYPE_B] = 6,
+	[THERMOCOUPLE_TYPE_R] = 7,
+};
+
+/* Map thermocouple type to a char for iio info in sysfs */
+static const int mcp9600_tc_types[] = {
+	[THERMOCOUPLE_TYPE_K] = 'K',
+	[THERMOCOUPLE_TYPE_J] = 'J',
+	[THERMOCOUPLE_TYPE_T] = 'T',
+	[THERMOCOUPLE_TYPE_N] = 'N',
+	[THERMOCOUPLE_TYPE_S] = 'S',
+	[THERMOCOUPLE_TYPE_E] = 'E',
+	[THERMOCOUPLE_TYPE_B] = 'B',
+	[THERMOCOUPLE_TYPE_R] = 'R',
+};
+
 static const struct iio_event_spec mcp9600_events[] = {
 	{
 		.type = IIO_EV_TYPE_THRESH,
@@ -90,14 +118,34 @@ struct mcp_chip_info {
 
 struct mcp9600_data {
 	struct i2c_client *client;
+	u32 thermocouple_type;
 };
 
+static int mcp9600_config(struct mcp9600_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+	u8 cfg;
+
+	cfg  = FIELD_PREP(MCP9600_SENSOR_TYPE_MASK,
+			  mcp9600_type_map[data->thermocouple_type]);
+
+	ret = i2c_smbus_write_byte_data(client, MCP9600_SENSOR_CFG, cfg);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to set sensor configuration\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 #define MCP9600_CHANNELS(hj_num_ev, hj_ev_spec_off, cj_num_ev, cj_ev_spec_off) \
 	{								       \
 		{							       \
 			.type = IIO_TEMP,				       \
 			.address = MCP9600_HOT_JUNCTION,		       \
 			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	       \
+					      BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE) | \
 					      BIT(IIO_CHAN_INFO_SCALE),	       \
 			.event_spec = &mcp9600_events[hj_ev_spec_off],	       \
 			.num_event_specs = hj_num_ev,			       \
@@ -165,6 +213,9 @@ static int mcp9600_read_raw(struct iio_dev *indio_dev,
 		*val = 62;
 		*val2 = 500000;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+		*val = mcp9600_tc_types[data->thermocouple_type];
+		return IIO_VAL_CHAR;
 	default:
 		return -EINVAL;
 	}
@@ -426,7 +477,7 @@ static int mcp9600_probe(struct i2c_client *client)
 	const struct mcp_chip_info *chip_info;
 	struct iio_dev *indio_dev;
 	struct mcp9600_data *data;
-	int ch_sel, dev_id;
+	int ch_sel, dev_id, ret;
 
 	chip_info = i2c_get_match_data(client);
 	if (!chip_info)
@@ -458,6 +509,24 @@ static int mcp9600_probe(struct i2c_client *client)
 	data = iio_priv(indio_dev);
 	data->client = client;
 
+	/* Accept type from dt with default of Type-K. */
+	data->thermocouple_type = THERMOCOUPLE_TYPE_K;
+	ret = device_property_read_u32(dev, "thermocouple-type",
+				       &data->thermocouple_type);
+	if (ret && ret != -EINVAL)
+		return dev_err_probe(dev, ret,
+				     "Error reading thermocouple-type property\n");
+
+	if (data->thermocouple_type >= ARRAY_SIZE(mcp9600_type_map))
+		return dev_err_probe(dev, -EINVAL,
+				     "Invalid thermocouple-type property %u.\n",
+				     data->thermocouple_type);
+
+	/* Set initial config. */
+	ret = mcp9600_config(data);
+	if (ret)
+		return ret;
+
 	ch_sel = mcp9600_probe_alerts(indio_dev);
 	if (ch_sel < 0)
 		return ch_sel;

-- 
2.39.5