Re: [PATCH v11 13/23] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports

[Jonathan Cameron <jonathan.cameron@huawei.com>]

> >Subject: [PATCH v11 13/23] cxl/pci: Unify CXL trace logging for CXL Endpoints
> >and CXL Ports
> >
> >CXL currently has separate trace routines for CXL Port errors and CXL Endpoint
> >errors. This is inconvenient for the user because they must enable
> >2 sets of trace routines. Make updates to the trace logging such that a single
> >trace routine logs both CXL Endpoint and CXL Port protocol errors.
> >
> >Keep the trace log fields 'memdev' and 'host'. While these are not accurate for
> >non-Endpoints the fields will remain as-is to prevent breaking userspace RAS
> >trace consumers.
> >
> >Add serial number parameter to the trace logging. This is used for EPs and 0 is
> >provided for CXL port devices without a serial number.
> >
> >Leave the correctable and uncorrectable trace routines' TP_STRUCT__entry()
> >unchanged with respect to member data types and order.
> >
> >Below is output of correctable and uncorrectable protocol error logging.
> >CXL Root Port and CXL Endpoint examples are included below.
> >
> >Root Port:
> >cxl_aer_correctable_error: memdev=0000:0c:00.0 host=pci0000:0c serial: 0
> >status='CRC Threshold Hit'
> >cxl_aer_uncorrectable_error: memdev=0000:0c:00.0 host=pci0000:0c serial: 0
> >status: 'Cache Byte Enable Parity Error' first_error: 'Cache Byte Enable Parity
> >Error'
> >
> >Endpoint:
> >cxl_aer_correctable_error: memdev=mem3 host=0000:0f:00.0 serial=0
> >status='CRC Threshold Hit'
> >cxl_aer_uncorrectable_error: memdev=mem3 host=0000:0f:00.0 serial: 0 status:
> >'Cache Byte Enable Parity Error' first_error: 'Cache Byte Enable Parity Error'
> >
> >Signed-off-by: Terry Bowman <terry.bowman@amd.com>  
> 
> Reviewed-by: Shiju Jose <shiju.jose@huawei.com>,
> apart from one error below.
> 
Good spot.
With that fixed up,
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>