All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jonathan.cameron@huawei.com>
To: Terry Bowman <terry.bowman@amd.com>
Cc: <dave@stgolabs.net>, <dave.jiang@intel.com>,
	<alison.schofield@intel.com>, <dan.j.williams@intel.com>,
	<bhelgaas@google.com>, <shiju.jose@huawei.com>,
	<ming.li@zohomail.com>, <Smita.KoralahalliChannabasappa@amd.com>,
	<rrichter@amd.com>, <dan.carpenter@linaro.org>,
	<PradeepVineshReddy.Kodamati@amd.com>, <lukas@wunner.de>,
	<Benjamin.Cheatham@amd.com>,
	<sathyanarayanan.kuppuswamy@linux.intel.com>,
	<linux-cxl@vger.kernel.org>, <alucerop@amd.com>,
	<ira.weiny@intel.com>, <linux-kernel@vger.kernel.org>,
	<linux-pci@vger.kernel.org>
Subject: Re: [PATCH v11 08/23] PCI/CXL: Introduce pcie_is_cxl()
Date: Wed, 10 Sep 2025 14:10:45 +0100	[thread overview]
Message-ID: <20250910141045.00003a2d@huawei.com> (raw)
In-Reply-To: <20250827013539.903682-9-terry.bowman@amd.com>

On Tue, 26 Aug 2025 20:35:23 -0500
Terry Bowman <terry.bowman@amd.com> wrote:

> CXL and AER drivers need the ability to identify CXL devices.
> 
> Introduce set_pcie_cxl() with logic checking for CXL.mem or CXL.cache
> status in the CXL Flexbus DVSEC status register. The CXL Flexbus DVSEC
> presence is used because it is required for all the CXL PCIe devices.[1]
> 
> Add boolean 'struct pci_dev::is_cxl' with the purpose to cache the CXL
> CXL.cache and CXl.mem status.
> 
> In the case the device is an EP or USP, call set_pcie_cxl() on behalf of
> the parent downstream device. This will make certain the correct state
> is cached.
> 
> Add function pcie_is_cxl() to return 'struct pci_dev::is_cxl'.
> 
> [1] CXL 3.1 Spec, 8.1.1 PCIe Designated Vendor-Specific Extended
>     Capability (DVSEC) ID Assignment, Table 8-2
> 
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Reviewed-by: Ira Weiny <ira.weiny@intel.com>
> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Trivial comment inline.

> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index b03244d55aea..252c06402b13 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -1274,6 +1274,9 @@
>  
>  /* CXL 3.2 8.1.8: PCIe DVSEC for Flex Bus Port */
>  #define PCI_DVSEC_CXL_FLEXBUS_PORT				7
> +#define	  PCI_DVSEC_CXL_FLEXBUS_STATUS_OFFSET			0xE
> +#define	    PCI_DVSEC_CXL_FLEXBUS_STATUS_CACHE_MASK		BIT(0)
> +#define	    PCI_DVSEC_CXL_FLEXBUS_STATUS_MEM_MASK		BIT(2)
>  
Whilst there is some logic in using tabs, the existing content
of this file uses spaces between define and name - even when indent is
large enough a tab gives same answer.  We should stick to that local style.

>  /* CXL 3.2 8.1.9: Register Locator DVSEC */
>  #define PCI_DVSEC_CXL_REG_LOCATOR				8


  parent reply	other threads:[~2025-09-10 13:10 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-27  1:35 [PATCH v11 00/23] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2025-08-27  1:35 ` [PATCH v11 01/23] cxl: Remove ifdef blocks of CONFIG_PCIEAER_CXL from core/pci.c Terry Bowman
2025-08-27  1:35 ` [PATCH v11 02/23] CXL/AER: Remove CONFIG_PCIEAER_CXL and replace with CONFIG_CXL_RAS Terry Bowman
2025-08-29 15:24   ` Jonathan Cameron
2025-08-29 18:16   ` Sathyanarayanan Kuppuswamy
2025-08-27  1:35 ` [PATCH v11 03/23] cxl/pci: Remove unnecessary CXL Endpoint handling helper functions Terry Bowman
2025-08-28 15:28   ` Dave Jiang
2025-08-27  1:35 ` [PATCH v11 04/23] cxl/pci: Remove unnecessary CXL RCH " Terry Bowman
2025-08-28  8:35   ` Alejandro Lucero Palau
2025-08-28 17:32   ` Dave Jiang
2025-08-27  1:35 ` [PATCH v11 05/23] cxl: Move CXL driver RCH error handling into CONFIG_CXL_RCH_RAS conditional block Terry Bowman
2025-08-28  8:57   ` Alejandro Lucero Palau
2025-09-10 16:43     ` Bowman, Terry
2025-08-29 15:33   ` Jonathan Cameron
2025-09-11 17:48     ` Bowman, Terry
2025-09-11 19:41       ` Dave Jiang
2025-09-15 13:32         ` Bowman, Terry
2025-08-27  1:35 ` [PATCH v11 06/23] CXL/AER: Introduce rch_aer.c into AER driver for handling CXL RCH errors Terry Bowman
2025-08-28 20:53   ` Dave Jiang
2025-08-29  8:39     ` Lukas Wunner
2025-09-10 17:01       ` Bowman, Terry
2025-09-10 17:26         ` Dave Jiang
2025-09-12 13:59       ` Bowman, Terry
2025-09-12 19:09         ` Lukas Wunner
2025-09-10 16:56     ` Bowman, Terry
2025-09-10 12:43   ` Jonathan Cameron
2025-08-27  1:35 ` [PATCH v11 07/23] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h Terry Bowman
2025-08-27 14:51   ` Lukas Wunner
2025-08-29 15:42     ` Jonathan Cameron
2025-08-29 15:47     ` Jonathan Cameron
2025-08-28 21:07   ` Dave Jiang
2025-09-10 18:11     ` Bowman, Terry
2025-09-10 20:06       ` Dave Jiang
2025-08-27  1:35 ` [PATCH v11 08/23] PCI/CXL: Introduce pcie_is_cxl() Terry Bowman
2025-08-28  8:18   ` Alejandro Lucero Palau
2025-09-10 16:24     ` Bowman, Terry
2025-09-11  3:48       ` Lukas Wunner
2025-09-10 13:10   ` Jonathan Cameron [this message]
2025-08-27  1:35 ` [PATCH v11 09/23] PCI/AER: Report CXL or PCIe bus error type in trace logging Terry Bowman
2025-08-27  7:37   ` Lukas Wunner
2025-09-10 15:26     ` Bowman, Terry
2025-09-10 15:33       ` Lukas Wunner
2025-09-11  5:07   ` Lukas Wunner
2025-08-27  1:35 ` [PATCH v11 10/23] CXL/AER: Update PCI class code check to use FIELD_GET() Terry Bowman
2025-08-29 16:03   ` Jonathan Cameron
2025-09-11 18:18     ` Bowman, Terry
2025-08-27  1:35 ` [PATCH v11 11/23] cxl/pci: Update RAS handler interfaces to also support CXL Ports Terry Bowman
2025-08-27  1:35 ` [PATCH v11 12/23] cxl/pci: Log message if RAS registers are unmapped Terry Bowman
2025-08-27  1:35 ` [PATCH v11 13/23] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports Terry Bowman
2025-08-27 11:55   ` Shiju Jose
2025-08-29 16:06     ` Jonathan Cameron
2025-08-27  1:35 ` [PATCH v11 14/23] cxl/pci: Update cxl_handle_cor_ras() to return early if no RAS errors Terry Bowman
2025-08-27  1:35 ` [PATCH v11 15/23] cxl/pci: Map CXL Endpoint Port and CXL Switch Port RAS registers Terry Bowman
2025-08-28 23:05   ` Dave Jiang
2025-09-10 18:40     ` Bowman, Terry
2025-08-27  1:35 ` [PATCH v11 16/23] cxl/pci: Introduce CXL Endpoint protocol error handlers Terry Bowman
2025-08-27  7:48   ` Lukas Wunner
2025-09-10 13:23   ` Jonathan Cameron
2025-08-27  1:35 ` [PATCH v11 17/23] CXL/AER: Introduce cxl_aer.c into AER driver for forwarding CXL errors Terry Bowman
2025-08-27  7:56   ` Lukas Wunner
2025-08-27  1:35 ` [PATCH v11 18/23] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2025-08-29  0:43   ` Dave Jiang
2025-08-29  7:10     ` Lukas Wunner
2025-09-16 15:18       ` Bowman, Terry
2025-09-11 14:33     ` Bowman, Terry
2025-09-11 15:41       ` Dave Jiang
2025-09-11 16:47         ` Bowman, Terry
2025-09-11 19:45           ` Dave Jiang
2025-09-10 13:29   ` Jonathan Cameron
2025-08-27  1:35 ` [PATCH v11 19/23] CXL/PCI: Introduce CXL Port protocol error handlers Terry Bowman
2025-08-30  0:17   ` Dave Jiang
2025-08-27  1:35 ` [PATCH v11 20/23] CXL/PCI: Export and rename merge_result() to pci_ers_merge_result() Terry Bowman
2025-08-27  8:04   ` Lukas Wunner
2025-09-10 15:57     ` Bowman, Terry
2025-09-11  3:44       ` Lukas Wunner
2025-08-27 12:19   ` kernel test robot
2025-08-27  1:35 ` [PATCH v11 21/23] CXL/PCI: Introduce CXL uncorrectable protocol error recovery Terry Bowman
2025-09-03 22:30   ` Dave Jiang
2025-09-11 19:19     ` Bowman, Terry
2025-09-11 19:48       ` Dave Jiang
2025-09-10 13:33   ` Jonathan Cameron
2025-08-27  1:35 ` [PATCH v11 22/23] CXL/PCI: Enable CXL protocol errors during CXL Port probe Terry Bowman
2025-09-03 23:23   ` Dave Jiang
2025-08-27  1:35 ` [PATCH v11 23/23] CXL/PCI: Disable CXL protocol error interrupts during CXL Port cleanup Terry Bowman
2025-09-10 15:07   ` Gregory Price
2025-09-11 20:19     ` Bowman, Terry
2025-08-29  0:07 ` [PATCH v11 00/23] Enable CXL PCIe Port Protocol Error handling and logging Dave Jiang
2025-09-23  3:29 ` Gregory Price
2025-09-23  9:21   ` Srinivasulu Thanneeru

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250910141045.00003a2d@huawei.com \
    --to=jonathan.cameron@huawei.com \
    --cc=Benjamin.Cheatham@amd.com \
    --cc=PradeepVineshReddy.Kodamati@amd.com \
    --cc=Smita.KoralahalliChannabasappa@amd.com \
    --cc=alison.schofield@intel.com \
    --cc=alucerop@amd.com \
    --cc=bhelgaas@google.com \
    --cc=dan.carpenter@linaro.org \
    --cc=dan.j.williams@intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=ming.li@zohomail.com \
    --cc=rrichter@amd.com \
    --cc=sathyanarayanan.kuppuswamy@linux.intel.com \
    --cc=shiju.jose@huawei.com \
    --cc=terry.bowman@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.