All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
Date: Sun, 21 Sep 2025 23:01:41 +0200	[thread overview]
Message-ID: <20250921210237.943370-2-aurelien@aurel32.net> (raw)
In-Reply-To: <20250921210237.943370-1-aurelien@aurel32.net>

Define properties for the I2C adapter, and enable it on the BPI-F3. It
will be used by the 24c02 eeprom.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts |  6 ++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi    |  7 +++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 13 +++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 66375fd1e9974..3b6e4f52e9aad 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -111,6 +111,12 @@ rgmii1: phy@1 {
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2_0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &i2c8 {
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index c9e9a844d2b1c..d565882c46dd7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -92,6 +92,13 @@ gmac1-pins {
 		};
 	};
 
+	i2c2_0_cfg: i2c2-0-cfg {
+		i2c2-0-pins {
+			pinmux = <K1_PADCONF(84, 4)>,	/* I2C2_SCL */
+				 <K1_PADCONF(85, 4)>;	/* I2C2_SDA */
+		};
+	};
+
 	i2c8_cfg: i2c8-cfg {
 		i2c8-0-pins {
 			pinmux = <K1_PADCONF(93, 0)>,	/* PWR_SCL */
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index bc61a380baca8..d4f38ded52c93 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -497,6 +497,19 @@ pwm7: pwm@d401bc00 {
 			status = "disabled";
 		};
 
+		i2c2: i2c@d4012000 {
+			compatible = "spacemit,k1-i2c";
+			reg = <0x0 0xd4012000 0x0 0x38>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&syscon_apbc CLK_TWSI2>,
+				 <&syscon_apbc CLK_TWSI2_BUS>;
+			clock-names = "func", "bus";
+			clock-frequency = <400000>;
+			interrupts = <38>;
+			status = "disabled";
+		};
+
 		i2c8: i2c@d401d800 {
 			compatible = "spacemit,k1-i2c";
 			reg = <0x0 0xd401d800 0x0 0x38>;
-- 
2.47.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V ARCHITECTURE),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
Date: Sun, 21 Sep 2025 23:01:41 +0200	[thread overview]
Message-ID: <20250921210237.943370-2-aurelien@aurel32.net> (raw)
In-Reply-To: <20250921210237.943370-1-aurelien@aurel32.net>

Define properties for the I2C adapter, and enable it on the BPI-F3. It
will be used by the 24c02 eeprom.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts |  6 ++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi    |  7 +++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 13 +++++++++++++
 3 files changed, 26 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 66375fd1e9974..3b6e4f52e9aad 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -111,6 +111,12 @@ rgmii1: phy@1 {
 	};
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2_0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &i2c8 {
 	pinctrl-0 = <&i2c8_cfg>;
 	pinctrl-names = "default";
diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index c9e9a844d2b1c..d565882c46dd7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -92,6 +92,13 @@ gmac1-pins {
 		};
 	};
 
+	i2c2_0_cfg: i2c2-0-cfg {
+		i2c2-0-pins {
+			pinmux = <K1_PADCONF(84, 4)>,	/* I2C2_SCL */
+				 <K1_PADCONF(85, 4)>;	/* I2C2_SDA */
+		};
+	};
+
 	i2c8_cfg: i2c8-cfg {
 		i2c8-0-pins {
 			pinmux = <K1_PADCONF(93, 0)>,	/* PWR_SCL */
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index bc61a380baca8..d4f38ded52c93 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -497,6 +497,19 @@ pwm7: pwm@d401bc00 {
 			status = "disabled";
 		};
 
+		i2c2: i2c@d4012000 {
+			compatible = "spacemit,k1-i2c";
+			reg = <0x0 0xd4012000 0x0 0x38>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&syscon_apbc CLK_TWSI2>,
+				 <&syscon_apbc CLK_TWSI2_BUS>;
+			clock-names = "func", "bus";
+			clock-frequency = <400000>;
+			interrupts = <38>;
+			status = "disabled";
+		};
+
 		i2c8: i2c@d401d800 {
 			compatible = "spacemit,k1-i2c";
 			reg = <0x0 0xd401d800 0x0 0x38>;
-- 
2.47.2


  reply	other threads:[~2025-09-21 21:03 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-21 21:01 [PATCH 0/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3 Aurelien Jarno
2025-09-21 21:01 ` Aurelien Jarno
2025-09-21 21:01 ` Aurelien Jarno [this message]
2025-09-21 21:01   ` [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter " Aurelien Jarno
2025-09-23  1:32   ` Troy Mitchell
2025-09-23  1:32     ` Troy Mitchell
2025-09-23 19:16     ` Aurelien Jarno
2025-09-23 19:16       ` Aurelien Jarno
2025-09-24  3:13       ` Troy Mitchell
2025-09-24  3:13         ` Troy Mitchell
2025-09-24 19:11         ` Aurelien Jarno
2025-09-24 19:11           ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 2/3] riscv: dts: spacemit: add 24c02 eeprom " Aurelien Jarno
2025-09-21 21:01   ` Aurelien Jarno
2025-09-22  3:21   ` Yixun Lan
2025-09-22  3:21     ` Yixun Lan
2025-09-22  4:49     ` Aurelien Jarno
2025-09-22  4:49       ` Aurelien Jarno
2025-09-22  8:01       ` Yixun Lan
2025-09-22  8:01         ` Yixun Lan
2025-09-22 21:00         ` Aurelien Jarno
2025-09-22 21:00           ` Aurelien Jarno
2025-09-23  1:42       ` Troy Mitchell
2025-09-23  1:42         ` Troy Mitchell
2025-09-23 19:38         ` Aurelien Jarno
2025-09-23 19:38           ` Aurelien Jarno
2025-09-23  2:00   ` Troy Mitchell
2025-09-23  2:00     ` Troy Mitchell
2025-09-23 19:21     ` Aurelien Jarno
2025-09-23 19:21       ` Aurelien Jarno
2025-09-23  6:32   ` Vivian Wang
2025-09-23  6:32     ` Vivian Wang
2025-09-23 19:30     ` Aurelien Jarno
2025-09-23 19:30       ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 3/3] riscv: dts: spacemit: add i2c aliases " Aurelien Jarno
2025-09-21 21:01   ` Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250921210237.943370-2-aurelien@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.