All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Cc: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"open list:RISC-V ARCHITECTURE" <linux-riscv@lists.infradead.org>,
	"open list:RISC-V SPACEMIT SoC Support"
	<spacemit@lists.linux.dev>
Subject: Re: [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
Date: Tue, 23 Sep 2025 21:16:50 +0200	[thread overview]
Message-ID: <aNLyIvS-UFfplmpu@aurel32.net> (raw)
In-Reply-To: <DC360EB139FD9DE5+aNH4l-7SP5KNu-Br@LT-Guozexi>

Hi Troy,

Thanks for the review.

On 2025-09-23 09:32, Troy Mitchell wrote:
> On Sun, Sep 21, 2025 at 11:01:41PM +0200, Aurelien Jarno wrote:
> > Define properties for the I2C adapter, and enable it on the BPI-F3. It
> > will be used by the 24c02 eeprom.
> > 
> > Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
> > ---
> > --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
> > +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
> > @@ -92,6 +92,13 @@ gmac1-pins {
> >  		};
> >  	};
> >  
> > +	i2c2_0_cfg: i2c2-0-cfg {
> Should this be i2c2_4_cfg here?
> From what I see, in the initial version the second cell was meant
> to be the function number rather than the serial index.

Ok, I wasn't aware of that convention, I just reused the same numbering 
of the downstream 6.6 kernel. I'll fix that and use i2c2_4_cfg.

> It looks like the pwm part is also incorrect.

Yes, and also the submitted PCIE patches.

Aurelien

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@aurel32.net                     http://aurel32.net

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Aurelien Jarno <aurelien@aurel32.net>
To: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Cc: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"open list:RISC-V ARCHITECTURE" <linux-riscv@lists.infradead.org>,
	"open list:RISC-V SPACEMIT SoC Support"
	<spacemit@lists.linux.dev>
Subject: Re: [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
Date: Tue, 23 Sep 2025 21:16:50 +0200	[thread overview]
Message-ID: <aNLyIvS-UFfplmpu@aurel32.net> (raw)
In-Reply-To: <DC360EB139FD9DE5+aNH4l-7SP5KNu-Br@LT-Guozexi>

Hi Troy,

Thanks for the review.

On 2025-09-23 09:32, Troy Mitchell wrote:
> On Sun, Sep 21, 2025 at 11:01:41PM +0200, Aurelien Jarno wrote:
> > Define properties for the I2C adapter, and enable it on the BPI-F3. It
> > will be used by the 24c02 eeprom.
> > 
> > Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
> > ---
> > --- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
> > +++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
> > @@ -92,6 +92,13 @@ gmac1-pins {
> >  		};
> >  	};
> >  
> > +	i2c2_0_cfg: i2c2-0-cfg {
> Should this be i2c2_4_cfg here?
> From what I see, in the initial version the second cell was meant
> to be the function number rather than the serial index.

Ok, I wasn't aware of that convention, I just reused the same numbering 
of the downstream 6.6 kernel. I'll fix that and use i2c2_4_cfg.

> It looks like the pwm part is also incorrect.

Yes, and also the submitted PCIE patches.

Aurelien

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@aurel32.net                     http://aurel32.net

  reply	other threads:[~2025-09-23 19:17 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-21 21:01 [PATCH 0/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3 Aurelien Jarno
2025-09-21 21:01 ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 1/3] riscv: dts: spacemit: enable the i2c2 adapter " Aurelien Jarno
2025-09-21 21:01   ` Aurelien Jarno
2025-09-23  1:32   ` Troy Mitchell
2025-09-23  1:32     ` Troy Mitchell
2025-09-23 19:16     ` Aurelien Jarno [this message]
2025-09-23 19:16       ` Aurelien Jarno
2025-09-24  3:13       ` Troy Mitchell
2025-09-24  3:13         ` Troy Mitchell
2025-09-24 19:11         ` Aurelien Jarno
2025-09-24 19:11           ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 2/3] riscv: dts: spacemit: add 24c02 eeprom " Aurelien Jarno
2025-09-21 21:01   ` Aurelien Jarno
2025-09-22  3:21   ` Yixun Lan
2025-09-22  3:21     ` Yixun Lan
2025-09-22  4:49     ` Aurelien Jarno
2025-09-22  4:49       ` Aurelien Jarno
2025-09-22  8:01       ` Yixun Lan
2025-09-22  8:01         ` Yixun Lan
2025-09-22 21:00         ` Aurelien Jarno
2025-09-22 21:00           ` Aurelien Jarno
2025-09-23  1:42       ` Troy Mitchell
2025-09-23  1:42         ` Troy Mitchell
2025-09-23 19:38         ` Aurelien Jarno
2025-09-23 19:38           ` Aurelien Jarno
2025-09-23  2:00   ` Troy Mitchell
2025-09-23  2:00     ` Troy Mitchell
2025-09-23 19:21     ` Aurelien Jarno
2025-09-23 19:21       ` Aurelien Jarno
2025-09-23  6:32   ` Vivian Wang
2025-09-23  6:32     ` Vivian Wang
2025-09-23 19:30     ` Aurelien Jarno
2025-09-23 19:30       ` Aurelien Jarno
2025-09-21 21:01 ` [PATCH 3/3] riscv: dts: spacemit: add i2c aliases " Aurelien Jarno
2025-09-21 21:01   ` Aurelien Jarno

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aNLyIvS-UFfplmpu@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    --cc=troy.mitchell@linux.spacemit.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.