All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hal Feng <hal.feng@starfivetech.com>
To: Conor Dooley <conor+dt@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	E Shattow <e@freeshell.de>, Paul Walmsley <pjw@kernel.org>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Hal Feng <hal.feng@starfivetech.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 6/7] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Thu, 16 Oct 2025 16:00:53 +0800	[thread overview]
Message-ID: <20251016080054.12484-7-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251016080054.12484-1-hal.feng@starfivetech.com>

VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.

Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI

VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/Makefile         |  2 ++
 .../jh7110s-starfive-visionfive-2-lite.dts    | 20 +++++++++++++++++++
 2 files changed, 22 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts

diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..f53109253d41 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110s-starfive-visionfive-2-lite.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..ac5e66027bad
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110s-starfive-visionfive-2-lite.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 Lite";
+	compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+	disable-wp;
+	cap-sd-highspeed;
+};
-- 
2.43.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: Conor Dooley <conor+dt@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
	E Shattow <e@freeshell.de>, Paul Walmsley <pjw@kernel.org>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Hal Feng <hal.feng@starfivetech.com>,
	devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v1 6/7] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Thu, 16 Oct 2025 16:00:53 +0800	[thread overview]
Message-ID: <20251016080054.12484-7-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251016080054.12484-1-hal.feng@starfivetech.com>

VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.

Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI

VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/Makefile         |  2 ++
 .../jh7110s-starfive-visionfive-2-lite.dts    | 20 +++++++++++++++++++
 2 files changed, 22 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts

diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..f53109253d41 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110s-starfive-visionfive-2-lite.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..ac5e66027bad
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110s-starfive-visionfive-2-lite.dtsi"
+
+/ {
+	model = "StarFive VisionFive 2 Lite";
+	compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+	disable-wp;
+	cap-sd-highspeed;
+};
-- 
2.43.2


  parent reply	other threads:[~2025-10-16  8:01 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-16  8:00 [PATCH v1 0/7] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-10-16  8:00 ` Hal Feng
2025-10-16  8:00 ` [PATCH v1 1/7] cpufreq: dt-platdev: Add JH7110S SOC to the allowlist Hal Feng
2025-10-16  8:00   ` Hal Feng
2025-10-16  9:20   ` Heinrich Schuchardt
2025-10-16  9:20     ` Heinrich Schuchardt
2025-10-17  5:09   ` Viresh Kumar
2025-10-17  5:09     ` Viresh Kumar
2025-10-16  8:00 ` [PATCH v1 2/7] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property Hal Feng
2025-10-16  8:00   ` Hal Feng
2025-10-16  8:58   ` Heinrich Schuchardt
2025-10-16  8:58     ` Heinrich Schuchardt
2025-10-16 15:51     ` Conor Dooley
2025-10-16 15:51       ` Conor Dooley
2025-10-16  8:00 ` [PATCH v1 3/7] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-10-16  8:00   ` Hal Feng
2025-10-16  9:24   ` Heinrich Schuchardt
2025-10-16  9:24     ` Heinrich Schuchardt
2025-10-16 15:55   ` Conor Dooley
2025-10-16 15:55     ` Conor Dooley
2025-10-16  8:00 ` [PATCH v1 4/7] riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts Hal Feng
2025-10-16  8:00   ` Hal Feng
2025-10-16 15:54   ` Conor Dooley
2025-10-16 15:54     ` Conor Dooley
2025-10-16 22:55   ` E Shattow
2025-10-16 22:55     ` E Shattow
2025-11-03  5:43     ` Hal Feng
2025-11-03  5:43       ` Hal Feng
2025-10-16  8:00 ` [PATCH v1 5/7] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-10-16  8:00   ` Hal Feng
2025-10-16  8:00 ` Hal Feng [this message]
2025-10-16  8:00   ` [PATCH v1 6/7] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Hal Feng
2025-10-16  8:00 ` [PATCH v1 7/7] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-10-16  8:00   ` Hal Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251016080054.12484-7-hal.feng@starfivetech.com \
    --to=hal.feng@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=e@freeshell.de \
    --cc=emil.renner.berthing@canonical.com \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=rafael@kernel.org \
    --cc=robh@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.