From: Jamin Lin via <qemu-arm@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>,
<kane_chen@aspeedtech.com>
Subject: [PATCH v1 05/13] hw/arm/aspeed: Split FP5280G2 machine into a separate source file for maintenance
Date: Thu, 23 Oct 2025 18:01:38 +0800 [thread overview]
Message-ID: <20251023100150.295370-6-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20251023100150.295370-1-jamin_lin@aspeedtech.com>
This commit moves the FP5280G2 BMC machine implementation from
aspeed.c into a new standalone file aspeed_ast2500_fp5280g2.c.
The change improves code organization and prepares the Aspeed
machine framework for future expansion and easier maintenance.
Key updates include:
- Moved fp5280g2_bmc_i2c_init() and related machine class init
functions into aspeed_ast2500_fp5280g2.c.
- Added new file to hw/arm/meson.build for compilation.
- Removed obsolete FP5280G2 definitions from aspeed.c
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed.c | 65 ------------------------
hw/arm/aspeed_ast2500_fp5280g2.c | 87 ++++++++++++++++++++++++++++++++
hw/arm/meson.build | 1 +
3 files changed, 88 insertions(+), 65 deletions(-)
create mode 100644 hw/arm/aspeed_ast2500_fp5280g2.c
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 8a22696da9..48c3d73e73 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -130,21 +130,6 @@ static struct arm_boot_info aspeed_board_binfo = {
SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
-/* FP5280G2 hardware value: 0XF100D286 */
-#define FP5280G2_BMC_HW_STRAP1 ( \
- SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
- SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
- SCU_AST2500_HW_STRAP_UART_DEBUG | \
- SCU_AST2500_HW_STRAP_RESERVED28 | \
- SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
- SCU_HW_STRAP_VGA_CLASS_CODE | \
- SCU_HW_STRAP_LPC_RESET_PIN | \
- SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
- SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
- SCU_HW_STRAP_MAC1_RGMII | \
- SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
- SCU_AST2500_HW_STRAP_RESERVED1)
-
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
@@ -685,33 +670,6 @@ static void g220a_bmc_i2c_init(AspeedMachineState *bmc)
eeprom_buf);
}
-static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
-{
- AspeedSoCState *soc = bmc->soc;
- I2CSlave *i2c_mux;
-
- /* The at24c256 */
- at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
-
- /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
- 0x48);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
- 0x49);
-
- i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
- "pca9546", 0x70);
- /* It expects a TMP112 but a TMP105 is compatible */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
- 0x4a);
-
- /* It expects a ds3232 but a ds1338 is good enough */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
-
- /* It expects a pca9555 but a pca9552 is compatible */
- create_pca9552(soc, 8, 0x30);
-}
-
static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = bmc->soc;
@@ -1607,25 +1565,6 @@ static void aspeed_machine_g220a_class_init(ObjectClass *oc, const void *data)
aspeed_machine_class_init_cpus_defaults(mc);
};
-static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc,
- const void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
- AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
-
- mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
- mc->deprecation_reason = "use 'ast2500-evb' instead";
- amc->soc_name = "ast2500-a1";
- amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
- amc->fmc_model = "n25q512a";
- amc->spi_model = "mx25l25635e";
- amc->num_cs = 2;
- amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
- amc->i2c_init = fp5280g2_bmc_i2c_init;
- mc->default_ram_size = 512 * MiB;
- aspeed_machine_class_init_cpus_defaults(mc);
-};
-
static void aspeed_machine_rainier_class_init(ObjectClass *oc, const void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -2001,10 +1940,6 @@ static const TypeInfo aspeed_machine_types[] = {
.name = MACHINE_TYPE_NAME("qcom-firework-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_qcom_firework_class_init,
- }, {
- .name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
- .parent = TYPE_ASPEED_MACHINE,
- .class_init = aspeed_machine_fp5280g2_class_init,
}, {
.name = MACHINE_TYPE_NAME("quanta-q71l-bmc"),
.parent = TYPE_ASPEED_MACHINE,
diff --git a/hw/arm/aspeed_ast2500_fp5280g2.c b/hw/arm/aspeed_ast2500_fp5280g2.c
new file mode 100644
index 0000000000..a312c29c5d
--- /dev/null
+++ b/hw/arm/aspeed_ast2500_fp5280g2.c
@@ -0,0 +1,87 @@
+/*
+ * Inspur FP5280G2
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/arm/aspeed.h"
+#include "hw/arm/aspeed_soc.h"
+#include "hw/nvram/eeprom_at24c.h"
+#include "hw/i2c/i2c_mux_pca954x.h"
+#include "hw/sensor/tmp105.h"
+
+/* FP5280G2 hardware value: 0XF100D286 */
+#define FP5280G2_BMC_HW_STRAP1 ( \
+ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
+ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
+ SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_RESERVED28 | \
+ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
+ SCU_HW_STRAP_VGA_CLASS_CODE | \
+ SCU_HW_STRAP_LPC_RESET_PIN | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
+ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
+ SCU_HW_STRAP_MAC1_RGMII | \
+ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
+ SCU_AST2500_HW_STRAP_RESERVED1)
+
+static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = bmc->soc;
+ I2CSlave *i2c_mux;
+
+ /* The at24c256 */
+ at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
+
+ /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x49);
+
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
+ "pca9546", 0x70);
+ /* It expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
+ 0x4a);
+
+ /* It expects a ds3232 but a ds1338 is good enough */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
+
+ /* It expects a pca9555 but a pca9552 is compatible */
+ create_pca9552(soc, 8, 0x30);
+}
+
+static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc,
+ const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
+ mc->deprecation_reason = "use 'ast2500-evb' instead";
+ amc->soc_name = "ast2500-a1";
+ amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
+ amc->fmc_model = "n25q512a";
+ amc->spi_model = "mx25l25635e";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+ amc->i2c_init = fp5280g2_bmc_i2c_init;
+ mc->default_ram_size = 512 * MiB;
+ aspeed_machine_class_init_cpus_defaults(mc);
+};
+
+static const TypeInfo aspeed_ast2500_fp5280g2_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_fp5280g2_class_init,
+ }
+};
+
+DEFINE_TYPES(aspeed_ast2500_fp5280g2_types)
+
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index b88b5b06d7..55513db65b 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -44,6 +44,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed.c',
'aspeed_soc_common.c',
'aspeed_ast2400.c',
+ 'aspeed_ast2500_fp5280g2.c',
'aspeed_ast2600.c',
'aspeed_ast10x0.c',
'aspeed_eeprom.c',
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Steven Lee" <steven_lee@aspeedtech.com>,
"Troy Lee" <leetroy@gmail.com>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>,
<kane_chen@aspeedtech.com>
Subject: [PATCH v1 05/13] hw/arm/aspeed: Split FP5280G2 machine into a separate source file for maintenance
Date: Thu, 23 Oct 2025 18:01:38 +0800 [thread overview]
Message-ID: <20251023100150.295370-6-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20251023100150.295370-1-jamin_lin@aspeedtech.com>
This commit moves the FP5280G2 BMC machine implementation from
aspeed.c into a new standalone file aspeed_ast2500_fp5280g2.c.
The change improves code organization and prepares the Aspeed
machine framework for future expansion and easier maintenance.
Key updates include:
- Moved fp5280g2_bmc_i2c_init() and related machine class init
functions into aspeed_ast2500_fp5280g2.c.
- Added new file to hw/arm/meson.build for compilation.
- Removed obsolete FP5280G2 definitions from aspeed.c
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/arm/aspeed.c | 65 ------------------------
hw/arm/aspeed_ast2500_fp5280g2.c | 87 ++++++++++++++++++++++++++++++++
hw/arm/meson.build | 1 +
3 files changed, 88 insertions(+), 65 deletions(-)
create mode 100644 hw/arm/aspeed_ast2500_fp5280g2.c
diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 8a22696da9..48c3d73e73 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -130,21 +130,6 @@ static struct arm_boot_info aspeed_board_binfo = {
SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
SCU_AST2500_HW_STRAP_RESERVED1)
-/* FP5280G2 hardware value: 0XF100D286 */
-#define FP5280G2_BMC_HW_STRAP1 ( \
- SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
- SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
- SCU_AST2500_HW_STRAP_UART_DEBUG | \
- SCU_AST2500_HW_STRAP_RESERVED28 | \
- SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
- SCU_HW_STRAP_VGA_CLASS_CODE | \
- SCU_HW_STRAP_LPC_RESET_PIN | \
- SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
- SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
- SCU_HW_STRAP_MAC1_RGMII | \
- SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
- SCU_AST2500_HW_STRAP_RESERVED1)
-
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
@@ -685,33 +670,6 @@ static void g220a_bmc_i2c_init(AspeedMachineState *bmc)
eeprom_buf);
}
-static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
-{
- AspeedSoCState *soc = bmc->soc;
- I2CSlave *i2c_mux;
-
- /* The at24c256 */
- at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
-
- /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
- 0x48);
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
- 0x49);
-
- i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
- "pca9546", 0x70);
- /* It expects a TMP112 but a TMP105 is compatible */
- i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
- 0x4a);
-
- /* It expects a ds3232 but a ds1338 is good enough */
- i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
-
- /* It expects a pca9555 but a pca9552 is compatible */
- create_pca9552(soc, 8, 0x30);
-}
-
static void rainier_bmc_i2c_init(AspeedMachineState *bmc)
{
AspeedSoCState *soc = bmc->soc;
@@ -1607,25 +1565,6 @@ static void aspeed_machine_g220a_class_init(ObjectClass *oc, const void *data)
aspeed_machine_class_init_cpus_defaults(mc);
};
-static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc,
- const void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
- AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
-
- mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
- mc->deprecation_reason = "use 'ast2500-evb' instead";
- amc->soc_name = "ast2500-a1";
- amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
- amc->fmc_model = "n25q512a";
- amc->spi_model = "mx25l25635e";
- amc->num_cs = 2;
- amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
- amc->i2c_init = fp5280g2_bmc_i2c_init;
- mc->default_ram_size = 512 * MiB;
- aspeed_machine_class_init_cpus_defaults(mc);
-};
-
static void aspeed_machine_rainier_class_init(ObjectClass *oc, const void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -2001,10 +1940,6 @@ static const TypeInfo aspeed_machine_types[] = {
.name = MACHINE_TYPE_NAME("qcom-firework-bmc"),
.parent = TYPE_ASPEED_MACHINE,
.class_init = aspeed_machine_qcom_firework_class_init,
- }, {
- .name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
- .parent = TYPE_ASPEED_MACHINE,
- .class_init = aspeed_machine_fp5280g2_class_init,
}, {
.name = MACHINE_TYPE_NAME("quanta-q71l-bmc"),
.parent = TYPE_ASPEED_MACHINE,
diff --git a/hw/arm/aspeed_ast2500_fp5280g2.c b/hw/arm/aspeed_ast2500_fp5280g2.c
new file mode 100644
index 0000000000..a312c29c5d
--- /dev/null
+++ b/hw/arm/aspeed_ast2500_fp5280g2.c
@@ -0,0 +1,87 @@
+/*
+ * Inspur FP5280G2
+ *
+ * Copyright (C) 2025 ASPEED Technology Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/arm/aspeed.h"
+#include "hw/arm/aspeed_soc.h"
+#include "hw/nvram/eeprom_at24c.h"
+#include "hw/i2c/i2c_mux_pca954x.h"
+#include "hw/sensor/tmp105.h"
+
+/* FP5280G2 hardware value: 0XF100D286 */
+#define FP5280G2_BMC_HW_STRAP1 ( \
+ SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
+ SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
+ SCU_AST2500_HW_STRAP_UART_DEBUG | \
+ SCU_AST2500_HW_STRAP_RESERVED28 | \
+ SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
+ SCU_HW_STRAP_VGA_CLASS_CODE | \
+ SCU_HW_STRAP_LPC_RESET_PIN | \
+ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
+ SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
+ SCU_HW_STRAP_MAC1_RGMII | \
+ SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
+ SCU_AST2500_HW_STRAP_RESERVED1)
+
+static void fp5280g2_bmc_i2c_init(AspeedMachineState *bmc)
+{
+ AspeedSoCState *soc = bmc->soc;
+ I2CSlave *i2c_mux;
+
+ /* The at24c256 */
+ at24c_eeprom_init(aspeed_i2c_get_bus(&soc->i2c, 1), 0x50, 32768);
+
+ /* The fp5280g2 expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x48);
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2), TYPE_TMP105,
+ 0x49);
+
+ i2c_mux = i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 2),
+ "pca9546", 0x70);
+ /* It expects a TMP112 but a TMP105 is compatible */
+ i2c_slave_create_simple(pca954x_i2c_get_bus(i2c_mux, 0), TYPE_TMP105,
+ 0x4a);
+
+ /* It expects a ds3232 but a ds1338 is good enough */
+ i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 4), "ds1338", 0x68);
+
+ /* It expects a pca9555 but a pca9552 is compatible */
+ create_pca9552(soc, 8, 0x30);
+}
+
+static void aspeed_machine_fp5280g2_class_init(ObjectClass *oc,
+ const void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+ mc->desc = "Inspur FP5280G2 BMC (ARM1176)";
+ mc->deprecation_reason = "use 'ast2500-evb' instead";
+ amc->soc_name = "ast2500-a1";
+ amc->hw_strap1 = FP5280G2_BMC_HW_STRAP1;
+ amc->fmc_model = "n25q512a";
+ amc->spi_model = "mx25l25635e";
+ amc->num_cs = 2;
+ amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+ amc->i2c_init = fp5280g2_bmc_i2c_init;
+ mc->default_ram_size = 512 * MiB;
+ aspeed_machine_class_init_cpus_defaults(mc);
+};
+
+static const TypeInfo aspeed_ast2500_fp5280g2_types[] = {
+ {
+ .name = MACHINE_TYPE_NAME("fp5280g2-bmc"),
+ .parent = TYPE_ASPEED_MACHINE,
+ .class_init = aspeed_machine_fp5280g2_class_init,
+ }
+};
+
+DEFINE_TYPES(aspeed_ast2500_fp5280g2_types)
+
diff --git a/hw/arm/meson.build b/hw/arm/meson.build
index b88b5b06d7..55513db65b 100644
--- a/hw/arm/meson.build
+++ b/hw/arm/meson.build
@@ -44,6 +44,7 @@ arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files(
'aspeed.c',
'aspeed_soc_common.c',
'aspeed_ast2400.c',
+ 'aspeed_ast2500_fp5280g2.c',
'aspeed_ast2600.c',
'aspeed_ast10x0.c',
'aspeed_eeprom.c',
--
2.43.0
next prev parent reply other threads:[~2025-10-23 10:03 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-23 10:01 [PATCH v1 00/13] Split AST2500 SoC machines into separate source files for maintainability Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-23 10:01 ` [PATCH v1 01/13] hw/arm/aspeed: Move AspeedMachineState definition to common header for reuse Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:06 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 02/13] hw/arm/aspeed: Make aspeed_machine_class_init_cpus_defaults() globally accessible Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:08 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 03/13] hw/arm/aspeed: Make create_pca9552() globally accessible for reuse Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:08 ` [SPAM] " Cédric Le Goater
2025-10-31 6:45 ` Jamin Lin
2025-10-31 6:59 ` Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 04/13] hw/arm/aspeed: Make create_pca9554() available for use by other Aspeed machines Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` Jamin Lin via [this message]
2025-10-23 10:01 ` [PATCH v1 05/13] hw/arm/aspeed: Split FP5280G2 machine into a separate source file for maintenance Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 06/13] hw/arm/aspeed: Split G220A machine into a separate source file for better maintenance Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 07/13] hw/arm/aspeed: Split Tiogapass machine into a separate source file for cleanup Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 08/13] hw/arm/aspeed: Split YosemiteV2 machine into a separate source file for maintainability Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 09/13] hw/arm/aspeed: Split Witherspoon " Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 10/13] hw/arm/aspeed: Split Sonorapass " Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 11/13] hw/arm/aspeed: Split Romulus " Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:09 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 12/13] hw/arm/aspeed: Split Supermicro X11SPI machine into a separate " Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:10 ` [SPAM] " Cédric Le Goater
2025-10-23 10:01 ` [PATCH v1 13/13] hw/arm/aspeed: Split AST2500 EVB machine into a separate source " Jamin Lin via
2025-10-23 10:01 ` Jamin Lin via
2025-10-29 17:10 ` [SPAM] " Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251023100150.295370-6-jamin_lin@aspeedtech.com \
--to=qemu-arm@nongnu.org \
--cc=andrew@codeconstruct.com.au \
--cc=clg@kaod.org \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=kane_chen@aspeedtech.com \
--cc=leetroy@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=steven_lee@aspeedtech.com \
--cc=troy_lee@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.