From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Grégory Clement" <gregory.clement@bootlin.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-clk@vger.kernel.org,
"Benoît Monin" <benoit.monin@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v3 6/7] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
Date: Wed, 19 Nov 2025 16:51:14 +0100 [thread overview]
Message-ID: <20251119-macb-phy-v3-6-e9a7be186a33@bootlin.com> (raw)
In-Reply-To: <20251119-macb-phy-v3-0-e9a7be186a33@bootlin.com>
Add both MACB/GEM instances found in the Mobileye EyeQ5 SoC.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 36a73e8a63a1..cec5ad875228 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -77,6 +77,8 @@ aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
+ ethernet0 = &macb0;
+ ethernet1 = &macb1;
};
cpu_intc: interrupt-controller {
@@ -231,6 +233,7 @@ olb: system-controller@e00000 {
#clock-cells = <1>;
clocks = <&xtal>;
clock-names = "ref";
+ #phy-cells = <1>;
};
gic: interrupt-controller@140000 {
@@ -305,6 +308,48 @@ gpio1: gpio@1500000 {
#interrupt-cells = <2>;
resets = <&olb 0 26>;
};
+
+ iocu-bus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges = <0x10 0x00000000 0x0 0x0 0x10 0>;
+
+ macb0: ethernet@2a00000 {
+ compatible = "mobileye,eyeq5-gem";
+ reg = <0x0 0x02a00000 0x0 0x4000>;
+ interrupt-parent = <&gic>;
+ /* One interrupt per queue */
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "hclk", "tsu_clk";
+ clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+ nvmem-cells = <ð0_mac>;
+ nvmem-cell-names = "mac-address";
+ phys = <&olb 0>;
+ };
+
+ macb1: ethernet@2b00000 {
+ compatible = "mobileye,eyeq5-gem";
+ reg = <0x0 0x02b00000 0x0 0x4000>;
+ interrupt-parent = <&gic>;
+ /* One interrupt per queue */
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "hclk", "tsu_clk";
+ clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+ nvmem-cells = <ð1_mac>;
+ nvmem-cell-names = "mac-address";
+ phys = <&olb 1>;
+ };
+ };
+
};
};
--
2.51.2
WARNING: multiple messages have this Message-ID (diff)
From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Grégory Clement" <gregory.clement@bootlin.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
"Stephen Boyd" <sboyd@kernel.org>,
"Philipp Zabel" <p.zabel@pengutronix.de>,
"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-clk@vger.kernel.org,
"Benoît Monin" <benoit.monin@bootlin.com>,
"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>
Subject: [PATCH v3 6/7] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers
Date: Wed, 19 Nov 2025 16:51:14 +0100 [thread overview]
Message-ID: <20251119-macb-phy-v3-6-e9a7be186a33@bootlin.com> (raw)
In-Reply-To: <20251119-macb-phy-v3-0-e9a7be186a33@bootlin.com>
Add both MACB/GEM instances found in the Mobileye EyeQ5 SoC.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
arch/mips/boot/dts/mobileye/eyeq5.dtsi | 45 ++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/mips/boot/dts/mobileye/eyeq5.dtsi b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
index 36a73e8a63a1..cec5ad875228 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5.dtsi
+++ b/arch/mips/boot/dts/mobileye/eyeq5.dtsi
@@ -77,6 +77,8 @@ aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
+ ethernet0 = &macb0;
+ ethernet1 = &macb1;
};
cpu_intc: interrupt-controller {
@@ -231,6 +233,7 @@ olb: system-controller@e00000 {
#clock-cells = <1>;
clocks = <&xtal>;
clock-names = "ref";
+ #phy-cells = <1>;
};
gic: interrupt-controller@140000 {
@@ -305,6 +308,48 @@ gpio1: gpio@1500000 {
#interrupt-cells = <2>;
resets = <&olb 0 26>;
};
+
+ iocu-bus {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+ dma-ranges = <0x10 0x00000000 0x0 0x0 0x10 0>;
+
+ macb0: ethernet@2a00000 {
+ compatible = "mobileye,eyeq5-gem";
+ reg = <0x0 0x02a00000 0x0 0x4000>;
+ interrupt-parent = <&gic>;
+ /* One interrupt per queue */
+ interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "hclk", "tsu_clk";
+ clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+ nvmem-cells = <ð0_mac>;
+ nvmem-cell-names = "mac-address";
+ phys = <&olb 0>;
+ };
+
+ macb1: ethernet@2b00000 {
+ compatible = "mobileye,eyeq5-gem";
+ reg = <0x0 0x02b00000 0x0 0x4000>;
+ interrupt-parent = <&gic>;
+ /* One interrupt per queue */
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "pclk", "hclk", "tsu_clk";
+ clocks = <&pclk>, <&pclk>, <&tsu_clk>;
+ nvmem-cells = <ð1_mac>;
+ nvmem-cell-names = "mac-address";
+ phys = <&olb 1>;
+ };
+ };
+
};
};
--
2.51.2
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-11-19 15:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-19 15:51 [PATCH v3 0/7] Add generic PHY driver used by MACB/GEM on EyeQ5 Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 1/7] dt-bindings: soc: mobileye: OLB is an Ethernet PHY provider " Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 2/7] phy: Add driver for EyeQ5 Ethernet PHY wrapper Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 3/7] clk: eyeq: use the auxiliary device creation helper Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 18:07 ` Stephen Boyd
2025-11-19 18:07 ` Stephen Boyd
2025-11-24 14:46 ` Théo Lebrun
2025-11-24 14:46 ` Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 4/7] clk: eyeq: add EyeQ5 children auxiliary device for generic PHYs Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 5/7] reset: eyeq: drop device_set_of_node_from_dev() done by parent Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun [this message]
2025-11-19 15:51 ` [PATCH v3 6/7] MIPS: mobileye: eyeq5: add two Cadence GEM Ethernet controllers Théo Lebrun
2025-11-19 15:51 ` [PATCH v3 7/7] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs Théo Lebrun
2025-11-19 15:51 ` Théo Lebrun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251119-macb-phy-v3-6-e9a7be186a33@bootlin.com \
--to=theo.lebrun@bootlin.com \
--cc=benoit.monin@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=maxime.chevallier@bootlin.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=tawfik.bayouk@mobileye.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tsbogend@alpha.franken.de \
--cc=vkoul@kernel.org \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.