[PATCH v3 7/7] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs

From: "Théo Lebrun" <theo.lebrun@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Grégory Clement" <gregory.clement@bootlin.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-clk@vger.kernel.org,
	"Benoît Monin" <benoit.monin@bootlin.com>,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>,
	"Andrew Lunn" <andrew@lunn.ch>
Subject: [PATCH v3 7/7] MIPS: mobileye: eyeq5-epm: add two Cadence GEM Ethernet PHYs
Date: Wed, 19 Nov 2025 16:51:15 +0100	[thread overview]
Message-ID: <20251119-macb-phy-v3-7-e9a7be186a33@bootlin.com> (raw)
In-Reply-To: <20251119-macb-phy-v3-0-e9a7be186a33@bootlin.com>

The Mobileye EyeQ5 eval board (EPM) embeds two MDIO PHYs.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 9fc1a1b0a81b..babf52731ea6 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -29,3 +29,29 @@ temperature-sensor@48 {
 		label = "U60";
 	};
 };
+
+&macb0 {
+	phy-mode = "sgmii";
+	phy-handle = <&macb0_phy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		macb0_phy: ethernet-phy@e {
+			reg = <0xe>;
+		};
+	};
+};
+
+&macb1 {
+	phy-mode = "rgmii-id";
+	phy-handle = <&macb1_phy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		macb1_phy: ethernet-phy@e {
+			reg = <0xe>;
+		};
+	};
+};

-- 
2.51.2

