All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Marek Vasut <marek.vasut+renesas@mailbox.org>,
	Heinrich Schuchardt <xypron.glpk@gmx.de>
Subject: Fwd: New Defects reported by Coverity Scan for Das U-Boot
Date: Sun, 23 Nov 2025 13:03:04 -0600	[thread overview]
Message-ID: <20251123190304.GI2125796@bill-the-cat> (raw)

[-- Attachment #1: Type: text/plain, Size: 5351 bytes --]

Hey all,

Here's the latest report.

---------- Forwarded message ---------
From: <scan-admin@coverity.com>
Date: Sun, Nov 23, 2025 at 12:28 PM
Subject: New Defects reported by Coverity Scan for Das U-Boot
To: <tom.rini@gmail.com>


Hi,

Please find the latest report on new defect(s) introduced to *Das U-Boot*
found with Coverity Scan.

   - *New Defects Found:* 3
   - 2 defect(s), reported by Coverity Scan earlier, were marked fixed in
   the recent build analyzed by Coverity Scan.
   - *Defects Shown:* Showing 3 of 3 defect(s)

Defect Details

** CID 639130:         (CHECKED_RETURN)
/test/cmd/bdinfo.c: 166           in bdinfo_test_all()
/test/cmd/bdinfo.c: 164           in bdinfo_test_all()
/test/cmd/bdinfo.c: 165           in bdinfo_test_all()


_____________________________________________________________________________________________
*** CID 639130:           (CHECKED_RETURN)
/test/cmd/bdinfo.c: 166             in bdinfo_test_all()
160
161     	ut_assertok(bdinfo_check_mem(uts));
162
163     	/* CONFIG_SYS_HAS_SRAM testing not supported */
164     	ut_check_console_linen(uts, "flashstart");
165     	ut_check_console_linen(uts, "flashsize");
>>>     CID 639130:           (CHECKED_RETURN)
>>>     Calling "ut_check_console_linen" without checking return value (as is done elsewhere 166 out of 169 times).
166     	ut_check_console_linen(uts, "flashoffset");
167     	ut_assert_nextline("baudrate    = %lu bps",
168     			   env_get_ulong("baudrate", 10, 1234));
169     	ut_assertok(test_num_l(uts, "relocaddr", gd->relocaddr));
170     	ut_assertok(test_num_l(uts, "reloc off", gd->reloc_off));
171     	ut_assert_nextline("%-12s= %u-bit", "Build", (uint)sizeof(void *) * 8);
/test/cmd/bdinfo.c: 164             in bdinfo_test_all()
158     {
159     	ut_assertok(test_num_l(uts, "boot_params", 0));
160
161     	ut_assertok(bdinfo_check_mem(uts));
162
163     	/* CONFIG_SYS_HAS_SRAM testing not supported */
>>>     CID 639130:           (CHECKED_RETURN)
>>>     Calling "ut_check_console_linen" without checking return value (as is done elsewhere 166 out of 169 times).
164     	ut_check_console_linen(uts, "flashstart");
165     	ut_check_console_linen(uts, "flashsize");
166     	ut_check_console_linen(uts, "flashoffset");
167     	ut_assert_nextline("baudrate    = %lu bps",
168     			   env_get_ulong("baudrate", 10, 1234));
169     	ut_assertok(test_num_l(uts, "relocaddr", gd->relocaddr));
/test/cmd/bdinfo.c: 165             in bdinfo_test_all()
159     	ut_assertok(test_num_l(uts, "boot_params", 0));
160
161     	ut_assertok(bdinfo_check_mem(uts));
162
163     	/* CONFIG_SYS_HAS_SRAM testing not supported */
164     	ut_check_console_linen(uts, "flashstart");
>>>     CID 639130:           (CHECKED_RETURN)
>>>     Calling "ut_check_console_linen" without checking return value (as is done elsewhere 166 out of 169 times).
165     	ut_check_console_linen(uts, "flashsize");
166     	ut_check_console_linen(uts, "flashoffset");
167     	ut_assert_nextline("baudrate    = %lu bps",
168     			   env_get_ulong("baudrate", 10, 1234));
169     	ut_assertok(test_num_l(uts, "relocaddr", gd->relocaddr));
170     	ut_assertok(test_num_l(uts, "reloc off", gd->reloc_off));

** CID 639129:       Memory - illegal accesses  (BUFFER_SIZE)
/drivers/clk/clk_scmi.c: 191           in scmi_clk_get_ctrl_flags()


_____________________________________________________________________________________________
*** CID 639129:         Memory - illegal accesses  (BUFFER_SIZE)
/drivers/clk/clk_scmi.c: 191             in scmi_clk_get_ctrl_flags()
185     		char name[SCMI_CLOCK_NAME_LENGTH_MAX];
186     		ret = scmi_clk_get_attibute(dev, clk->id & CLK_ID_MSK,
187     					    name, &attributes);
188     		if (ret)
189     			return ret;
190
>>>     CID 639129:         Memory - illegal accesses  (BUFFER_SIZE)
>>>     Calling "strncpy" with a maximum size argument of 16 bytes on destination array "clkscmi->name" of size 16 bytes might leave the destination string unterminated.
191     		strncpy(clkscmi->name, name, SCMI_CLOCK_NAME_LENGTH_MAX);
192     		if (CLK_HAS_RESTRICTIONS(attributes)) {
193     			u32 perm;
194
195     			ret = scmi_clk_get_permissions(dev, clk->id & CLK_ID_MSK, &perm);
196     			if (ret < 0)

** CID 639128:       Resource leaks  (RESOURCE_LEAK)
/drivers/clk/clk_scmi.c: 373           in scmi_clk_probe()


_____________________________________________________________________________________________
*** CID 639128:         Resource leaks  (RESOURCE_LEAK)
/drivers/clk/clk_scmi.c: 373             in scmi_clk_probe()
367     			return ret;
368
369     		dev_clk_dm(dev, i, &clk_scmi->clk);
370     		dev_set_parent_priv(clk_scmi->clk.dev, priv);
371     	}
372
>>>     CID 639128:         Resource leaks  (RESOURCE_LEAK)
>>>     Variable "clk_scmi_bulk" going out of scope leaks the storage it points to.
373     	return 0;
374     }
375
376     static int __scmi_clk_set_parent(struct clk *clk, struct clk *parent)
377     {
378     	struct scmi_clk_parent_set_in in = {



View Defects in Coverity Scan
<https://scan.coverity.com/projects/das-u-boot?tab=overview>

Best regards,

The Coverity Scan Admin Team

----- End forwarded message -----

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

             reply	other threads:[~2025-11-23 19:03 UTC|newest]

Thread overview: 99+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-23 19:03 Tom Rini [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-05-11 22:35 Fwd: New Defects reported by Coverity Scan for Das U-Boot Tom Rini
2026-05-08 23:42 Tom Rini
2026-05-14 15:39 ` Lucien.Jheng
2026-04-28 14:04 Tom Rini
2026-04-29  6:31 ` Michal Simek
2026-05-01 22:51   ` Raymond Mao
2026-05-12  8:44 ` Christian Pötzsch
2026-05-12 18:38   ` Tom Rini
2026-04-06 19:12 Tom Rini
2026-03-09 21:23 Tom Rini
2026-03-09 22:05 ` Raphaël Gallais-Pou
2026-03-09 22:13   ` Tom Rini
2026-02-23 19:51 Tom Rini
2026-02-13 22:09 Tom Rini
2026-02-18 23:02 ` Chris Morgan
2026-02-20 16:11   ` Tom Rini
2026-02-20 16:23     ` Chris Morgan
2026-01-16 19:43 Tom Rini
2026-02-09 11:05 ` Guillaume La Roque
2026-02-20 16:11   ` Tom Rini
2026-01-06 20:36 Tom Rini
2026-01-05 23:58 Tom Rini
2026-01-06  9:37 ` Mattijs Korpershoek
2026-01-06 17:15   ` Tom Rini
2026-01-06 10:03 ` Heiko Schocher
2025-12-08 19:38 Tom Rini
2025-11-10 18:55 Tom Rini
2025-10-11 18:06 Tom Rini
2025-10-12 14:22 ` Mikhail Kshevetskiy
2025-10-12 19:07   ` Tom Rini
2025-11-01  6:32     ` Mikhail Kshevetskiy
2025-11-03 15:17       ` Tom Rini
2025-11-03 15:24         ` Michael Nazzareno Trimarchi
2025-08-06 18:35 Tom Rini
2025-08-07  9:17 ` Heiko Schocher
2025-08-08  3:37   ` Maniyam, Dinesh
2025-08-08  4:01     ` Heiko Schocher
2025-07-29 16:32 Tom Rini
2025-07-25 13:26 Tom Rini
2025-07-25 13:34 ` Michal Simek
2025-08-04  9:11 ` Alexander Dahl
2025-07-14 23:29 Tom Rini
2025-07-15 13:45 ` Rasmus Villemoes
2025-07-08 14:10 Tom Rini
2025-04-28 21:59 Tom Rini
2025-04-29 12:07 ` Jerome Forissier
2025-04-30 16:50 ` Marek Vasut
2025-04-30 17:01   ` Tom Rini
2025-04-30 18:23 ` Heinrich Schuchardt
2025-04-30 19:14   ` Tom Rini
2025-03-11  1:49 Tom Rini
2025-02-25  2:39 Tom Rini
2025-02-25  6:06 ` Heiko Schocher
2025-02-25 10:48   ` Quentin Schulz
2025-02-25 10:54     ` Heiko Schocher
2025-02-10 22:26 Tom Rini
2025-02-11  6:14 ` Heiko Schocher
2025-02-11 22:30   ` Tom Rini
2024-12-31 13:55 Tom Rini
2024-12-24 17:14 Tom Rini
2024-11-15 13:27 Tom Rini
2024-11-12  2:11 Tom Rini
2024-10-28  3:11 Tom Rini
2024-10-19 16:16 Tom Rini
2024-10-16  3:47 Tom Rini
2024-10-16  5:56 ` Tudor Ambarus
2024-10-07 17:15 Tom Rini
2024-07-23 14:18 Tom Rini
2024-07-24  9:21 ` Mattijs Korpershoek
2024-07-24  9:45   ` Heinrich Schuchardt
2024-07-24  9:56     ` Mattijs Korpershoek
2024-07-24 10:06       ` Heinrich Schuchardt
2024-07-24 22:40         ` Tom Rini
2024-07-25  8:04           ` Mattijs Korpershoek
2024-07-25 17:16             ` Tom Rini
2024-07-24  9:53   ` Mattijs Korpershoek
2024-04-22 21:48 Tom Rini
2024-01-29 23:55 Tom Rini
2024-01-30  8:14 ` Heinrich Schuchardt
     [not found] <20240127154018.GC785631@bill-the-cat>
2024-01-27 20:56 ` Heinrich Schuchardt
2024-01-28  8:51   ` Heinrich Schuchardt
2024-01-22 23:52 Tom Rini
2024-01-22 23:30 Tom Rini
2024-01-23  8:15 ` Hugo Cornelis
     [not found] <65a933ab652b3_da12cbd3e77f998728e5@prd-scan-dashboard-0.mail>
2024-01-19  8:47 ` Heinrich Schuchardt
2024-01-18 14:35 Tom Rini
2024-01-08 17:45 Tom Rini
2024-01-09  5:26 ` Sean Anderson
2024-01-09 22:18   ` Tom Rini
2023-08-21 21:09 Tom Rini
2023-08-24  9:27 ` Abdellatif El Khlifi
2023-08-28 16:09   ` Alvaro Fernando García
2023-08-28 16:11     ` Tom Rini
2023-10-20 11:57 ` Abdellatif El Khlifi
2023-10-25 14:57   ` Tom Rini
2023-10-25 15:12     ` Abdellatif El Khlifi
2023-10-25 15:15       ` Tom Rini
2023-10-31 14:21         ` Abdellatif El Khlifi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251123190304.GI2125796@bill-the-cat \
    --to=trini@konsulko.com \
    --cc=marek.vasut+renesas@mailbox.org \
    --cc=u-boot@lists.denx.de \
    --cc=xypron.glpk@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.