From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: linux-can@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Josua Mayer <josua@solid-run.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 2/4] phy: phy-can-transceiver: Move OF ID table closer to their user
Date: Tue, 17 Mar 2026 21:27:28 +0100 [thread overview]
Message-ID: <20260317203001.2108568-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20260317203001.2108568-1-andriy.shevchenko@linux.intel.com>
There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/phy/phy-can-transceiver.c | 59 +++++++++++++++----------------
1 file changed, 29 insertions(+), 30 deletions(-)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 80eece74f77d..aaed8d08fcf0 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -97,35 +97,6 @@ static const struct can_transceiver_data tja1057_drvdata = {
.flags = CAN_TRANSCEIVER_SILENT_PRESENT,
};
-static const struct of_device_id can_transceiver_phy_ids[] = {
- {
- .compatible = "ti,tcan1042",
- .data = &tcan1042_drvdata
- },
- {
- .compatible = "ti,tcan1043",
- .data = &tcan1043_drvdata
- },
- {
- .compatible = "nxp,tja1048",
- .data = &tja1048_drvdata
- },
- {
- .compatible = "nxp,tja1051",
- .data = &tja1051_drvdata
- },
- {
- .compatible = "nxp,tja1057",
- .data = &tja1057_drvdata
- },
- {
- .compatible = "nxp,tjr1443",
- .data = &tcan1043_drvdata
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
-
static struct phy *can_transceiver_phy_xlate(struct device *dev,
const struct of_phandle_args *args)
{
@@ -229,6 +200,35 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
+static const struct of_device_id can_transceiver_phy_ids[] = {
+ {
+ .compatible = "ti,tcan1042",
+ .data = &tcan1042_drvdata
+ },
+ {
+ .compatible = "ti,tcan1043",
+ .data = &tcan1043_drvdata
+ },
+ {
+ .compatible = "nxp,tja1048",
+ .data = &tja1048_drvdata
+ },
+ {
+ .compatible = "nxp,tja1051",
+ .data = &tja1051_drvdata
+ },
+ {
+ .compatible = "nxp,tja1057",
+ .data = &tja1057_drvdata
+ },
+ {
+ .compatible = "nxp,tjr1443",
+ .data = &tcan1043_drvdata
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
+
static struct platform_driver can_transceiver_phy_driver = {
.probe = can_transceiver_phy_probe,
.driver = {
@@ -236,7 +236,6 @@ static struct platform_driver can_transceiver_phy_driver = {
.of_match_table = can_transceiver_phy_ids,
},
};
-
module_platform_driver(can_transceiver_phy_driver);
MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
--
2.50.1
WARNING: multiple messages have this Message-ID (diff)
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: linux-can@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Josua Mayer <josua@solid-run.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 2/4] phy: phy-can-transceiver: Move OF ID table closer to their user
Date: Tue, 17 Mar 2026 21:27:28 +0100 [thread overview]
Message-ID: <20260317203001.2108568-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20260317203001.2108568-1-andriy.shevchenko@linux.intel.com>
There is no code that uses ID table directly, except the
struct device_driver at the end of the file. Hence, move
table closer to its user. It's always possible to access
them via a pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/phy/phy-can-transceiver.c | 59 +++++++++++++++----------------
1 file changed, 29 insertions(+), 30 deletions(-)
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 80eece74f77d..aaed8d08fcf0 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -97,35 +97,6 @@ static const struct can_transceiver_data tja1057_drvdata = {
.flags = CAN_TRANSCEIVER_SILENT_PRESENT,
};
-static const struct of_device_id can_transceiver_phy_ids[] = {
- {
- .compatible = "ti,tcan1042",
- .data = &tcan1042_drvdata
- },
- {
- .compatible = "ti,tcan1043",
- .data = &tcan1043_drvdata
- },
- {
- .compatible = "nxp,tja1048",
- .data = &tja1048_drvdata
- },
- {
- .compatible = "nxp,tja1051",
- .data = &tja1051_drvdata
- },
- {
- .compatible = "nxp,tja1057",
- .data = &tja1057_drvdata
- },
- {
- .compatible = "nxp,tjr1443",
- .data = &tcan1043_drvdata
- },
- { }
-};
-MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
-
static struct phy *can_transceiver_phy_xlate(struct device *dev,
const struct of_phandle_args *args)
{
@@ -229,6 +200,35 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
+static const struct of_device_id can_transceiver_phy_ids[] = {
+ {
+ .compatible = "ti,tcan1042",
+ .data = &tcan1042_drvdata
+ },
+ {
+ .compatible = "ti,tcan1043",
+ .data = &tcan1043_drvdata
+ },
+ {
+ .compatible = "nxp,tja1048",
+ .data = &tja1048_drvdata
+ },
+ {
+ .compatible = "nxp,tja1051",
+ .data = &tja1051_drvdata
+ },
+ {
+ .compatible = "nxp,tja1057",
+ .data = &tja1057_drvdata
+ },
+ {
+ .compatible = "nxp,tjr1443",
+ .data = &tcan1043_drvdata
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids);
+
static struct platform_driver can_transceiver_phy_driver = {
.probe = can_transceiver_phy_probe,
.driver = {
@@ -236,7 +236,6 @@ static struct platform_driver can_transceiver_phy_driver = {
.of_match_table = can_transceiver_phy_ids,
},
};
-
module_platform_driver(can_transceiver_phy_driver);
MODULE_AUTHOR("Faiz Abbas <faiz_abbas@ti.com>");
--
2.50.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2026-03-17 20:30 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-17 20:27 [PATCH v2 0/4] phy: phy-can-transceiver: Ad-hoc cleanups and refactoring Andy Shevchenko
2026-03-17 20:27 ` Andy Shevchenko
2026-03-17 20:27 ` [PATCH v2 1/4] phy: phy-can-transceiver: Convert to use device property API Andy Shevchenko
2026-03-17 20:27 ` Andy Shevchenko
2026-04-27 11:26 ` Josua Mayer
2026-04-27 11:26 ` Josua Mayer
2026-03-17 20:27 ` Andy Shevchenko [this message]
2026-03-17 20:27 ` [PATCH v2 2/4] phy: phy-can-transceiver: Move OF ID table closer to their user Andy Shevchenko
2026-05-03 17:00 ` Vinod Koul
2026-05-03 17:00 ` Vinod Koul
2026-03-17 20:27 ` [PATCH v2 3/4] phy: phy-can-transceiver: Don't check for specific errors when parsing properties Andy Shevchenko
2026-03-17 20:27 ` Andy Shevchenko
2026-03-17 20:27 ` [PATCH v2 4/4] phy: phy-can-transceiver: Drop unused include Andy Shevchenko
2026-03-17 20:27 ` Andy Shevchenko
2026-04-27 11:05 ` Josua Mayer
2026-04-27 11:05 ` Josua Mayer
2026-04-14 18:43 ` [PATCH v2 0/4] phy: phy-can-transceiver: Ad-hoc cleanups and refactoring Andy Shevchenko
2026-04-14 18:43 ` Andy Shevchenko
2026-04-27 11:09 ` Josua Mayer
2026-04-27 11:09 ` Josua Mayer
2026-04-27 13:34 ` Andy Shevchenko
2026-04-27 13:34 ` Andy Shevchenko
2026-04-27 13:41 ` Josua Mayer
2026-04-27 13:41 ` Josua Mayer
2026-04-27 15:26 ` Andy Shevchenko
2026-04-27 15:26 ` Andy Shevchenko
2026-05-04 6:58 ` Andy Shevchenko
2026-05-04 6:58 ` Andy Shevchenko
2026-05-05 9:18 ` Josua Mayer
2026-05-05 9:18 ` Josua Mayer
2026-05-03 17:01 ` Vinod Koul
2026-05-03 17:01 ` Vinod Koul
2026-05-04 7:01 ` Andy Shevchenko
2026-05-04 7:01 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260317203001.2108568-3-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=josua@solid-run.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mailhol@kernel.org \
--cc=mkl@pengutronix.de \
--cc=neil.armstrong@linaro.org \
--cc=ulf.hansson@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.