[PATCH 0/1] usb: fix bug in marvell libertas driver

[PATCH 0/1] usb: fix bug in marvell libertas driver

[Jakov Novak]

This patch fixes a bug inside the Marvell Libertas driver.
The problem was the if_usb_disconnect function not properly
calling wake_up(), which lead to if_usb_prog_firmware being
stuck on initialization. This caused the lbs_wait_for_firmware_load
to be stuck as well and to trigger the error message.
The solution was to add the wake_up() call inside if_usb_disconnect.

Jakov Novak (1):
  add wake_up call inside if_usb_disconnect

 drivers/net/wireless/marvell/libertas/if_usb.c | 1 +
 1 file changed, 1 insertion(+)

-- 
2.53.0

[PATCH 1/1] add wake_up call inside if_usb_disconnect

[Jakov Novak]

Fixes: 954ee164f4f45
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
---
 drivers/net/wireless/marvell/libertas/if_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 8a6bf1365cfa..245c902a7e42 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -310,6 +310,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
 	struct lbs_private *priv = cardp->priv;
 
 	cardp->surprise_removed = 1;
+	wake_up(&cardp->fw_wq);
 
 	if (priv) {
 		lbs_stop_card(priv);
-- 
2.53.0

Re: [PATCH 1/1] add wake_up call inside if_usb_disconnect

[Johannes Berg]

On Fri, 2026-04-10 at 23:32 +0200, Jakov Novak wrote:
> Fixes: 954ee164f4f45
> Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
> Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
> Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>

Please correct the fixes tag, have a commit message explaining the
change, and fix up the subject per the driver's convention (see older
patches).

johannes

[PATCH v2 0/1] wifi: libertas: fix bug in Marvell Libertas driver

[Jakov Novak]

Thank you for the reply. It should be fixed now.

Jakov Novak (1):
  wifi: libertas: add wake_up() call to properly notify fw_wq during
    disconnect

 drivers/net/wireless/marvell/libertas/if_usb.c | 1 -
 1 file changed, 1 deletion(-)

-- 
2.53.0

[PATCH v2 1/1] wifi: libertas: add wake_up() call to properly notify fw_wq during disconnect

[Jakov Novak]

This is necessary because the thread would be stuck if the
firmware is not fully loaded before the if_usb_disconnect function is
called. In that case if_usb_prog_firmware would be stuck in
wait_event_interruptible and lbs_remove_card would also be stuck waiting
for firmware loading to be done which was the original bug reported.

Fixes: 954ee164f4f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
---
 drivers/net/wireless/marvell/libertas/if_usb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 245c902a7e42..8a6bf1365cfa 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -310,7 +310,6 @@ static void if_usb_disconnect(struct usb_interface *intf)
 	struct lbs_private *priv = cardp->priv;
 
 	cardp->surprise_removed = 1;
-	wake_up(&cardp->fw_wq);
 
 	if (priv) {
 		lbs_stop_card(priv);
-- 
2.53.0

[PATCH v2 1/1] wifi: libertas: add wake_up() call to properly notify fw_wq during disconnect

[Jakov Novak]

This is necessary because the thread would be stuck if the
firmware is not fully loaded before the if_usb_disconnect function is
called. In that case if_usb_prog_firmware would be stuck in
wait_event_interruptible and lbs_remove_card would also be stuck waiting
for firmware loading to be done which was the original bug reported.

Fixes: 954ee164f4f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
---
 drivers/net/wireless/marvell/libertas/if_usb.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 245c902a7e42..8a6bf1365cfa 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -310,7 +310,6 @@ static void if_usb_disconnect(struct usb_interface *intf)
 	struct lbs_private *priv = cardp->priv;
 
 	cardp->surprise_removed = 1;
+	wake_up(&cardp->fw_wq);
 
 	if (priv) {
 		lbs_stop_card(priv);
-- 
2.53.0

[resend PATCH v2 0/1] wifi: libertas: fix bug in Marvell Libertas driver

[Jakov Novak]

This is the same patch with the suggested tag and message fixes.

Jakov Novak (1):
  wifi: libertas: add wake_up() call to properly notify

 drivers/net/wireless/marvell/libertas/if_usb.c | 1 +
 1 file changed, 1 insertion(+)

-- 
2.54.0

[resend PATCH v2 1/1] wifi: libertas: add wake_up() call to properly notify

[Jakov Novak]

This is necessary because the thread would be stuck if the
firmware is not fully loaded before the if_usb_disconnect function is
called. In that case if_usb_prog_firmware would be stuck in
wait_event_interruptible and lbs_remove_card would also be stuck waiting
for firmware loading to be done which was the original bug reported.

Fixes: 954ee164f4f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Reported-and-tested-by: syzbot+c99d17aa44dbdba16ad2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
Signed-off-by: Jakov Novak <jakovnovak30@gmail.com>
---
 drivers/net/wireless/marvell/libertas/if_usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/marvell/libertas/if_usb.c b/drivers/net/wireless/marvell/libertas/if_usb.c
index 4fae0e335136..22f0bd6a141a 100644
--- a/drivers/net/wireless/marvell/libertas/if_usb.c
+++ b/drivers/net/wireless/marvell/libertas/if_usb.c
@@ -310,6 +310,7 @@ static void if_usb_disconnect(struct usb_interface *intf)
 	struct lbs_private *priv = cardp->priv;
 
 	cardp->surprise_removed = 1;
+	wake_up(&cardp->fw_wq);
 
 	if (priv) {
 		lbs_stop_card(priv);
-- 
2.54.0

Re: [resend PATCH v2 0/1] wifi: libertas: fix bug in Marvell Libertas driver

[Johannes Berg]

On Mon, 2026-05-04 at 17:04 +0200, Jakov Novak wrote:
> This is the same patch with the suggested tag and message fixes.
> 

That makes it not a resend but a v3 I guess ...

johannes

Re: [resend PATCH v2 0/1] wifi: libertas: fix bug in Marvell Libertas driver

[Jeff Johnson]

On 5/4/2026 8:04 AM, Jakov Novak wrote:
> This is the same patch with the suggested tag and message fixes.
> 
> Jakov Novak (1):
>   wifi: libertas: add wake_up() call to properly notify
> 
>  drivers/net/wireless/marvell/libertas/if_usb.c | 1 +
>  1 file changed, 1 insertion(+)
> 

1) A single patch doesn't need a cover letter
2) new versions of a patch should be a separate thread. Don't make new
versions "In-reply-to" the previous version.
3) Ingo Molnar once suggested a good template to follow for many
changes:https://lore.kernel.org/all/20131111113218.GF15810@gmail.com/
Over time I found this advice helpful, although not that exact template,
especially given that using "we" is now strongly discouraged.

I suggest something more like:
Currently, when <scenario>, <code reference> does <action>.
This has a <problem description>.
To address this issue, <imperative action to fix the code>.
<Any other comments which support this action such as describing how it fixes
the problem, how we know there are no side-effects (or known side-effects or
limitations)>