From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@gentoo.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/6] riscv: dts: spacemit: k1-musepi-pro: add 24c04 eeprom
Date: Mon, 11 May 2026 13:11:09 +0200 [thread overview]
Message-ID: <20260511111116.1109643-3-a.heider@gmail.com> (raw)
In-Reply-To: <20260511111116.1109643-1-a.heider@gmail.com>
Enable i2c2 and add the connected 24c04 EEPROM.
It contains an ONIE TLV table:
=> tlv_eeprom
TLV: 0
[ 12.162] TlvInfo Header:
[ 12.162] Id String: TlvInfo
[ 12.165] Version: 1
[ 12.168] Total Length: 58
[ 12.171] TLV Name Code Len Value
[ 12.175] -------------------- ---- --- -----
[ 12.179] Product Name 0x21 16 k1-x_MUSE-Pi-Pro
[ 12.184] Serial Number 0x23 17 BPMIMXXXXXXXXXXXX
[ 12.189] Unknown 0x41 1 0x02
[ 12.194] Base MAC Address 0x24 6 FE:FE:FE:XX:XX:XX
[ 12.199] MAC Addresses 0x2A 2 2
[ 12.203] CRC-32 0xFE 4 0x395ECD34
[ 12.207] Checksum is valid.
(With 0x41 as TLV_CODE_DDR_CSNUM)
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
.../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 35 ++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 88c35ad1ef2ae..79415d760f162 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -17,6 +17,7 @@ / {
aliases {
ethernet0 = ð0;
serial0 = &uart0;
+ i2c2 = &i2c2;
i2c8 = &i2c8;
};
@@ -92,6 +93,38 @@ &pdma {
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
+ pagesize = <8>;
+ read-only;
+ size = <256>;
+
+ nvmem-layout {
+ compatible = "onie,tlv-layout";
+
+ product-name {
+ };
+
+ serial-number {
+ };
+
+ mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+
+ num-macs {
+ };
+ };
+ };
+};
+
&i2c8 {
pinctrl-0 = <&i2c8_cfg>;
pinctrl-names = "default";
@@ -126,7 +159,7 @@ buck2 {
regulator-always-on;
};
- buck3 {
+ buck3_1v8: buck3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
--
2.53.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Yixun Lan <dlan@gentoo.org>,
Paul Walmsley <pjw@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Alexandre Ghiti <alex@ghiti.fr>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/6] riscv: dts: spacemit: k1-musepi-pro: add 24c04 eeprom
Date: Mon, 11 May 2026 13:11:09 +0200 [thread overview]
Message-ID: <20260511111116.1109643-3-a.heider@gmail.com> (raw)
In-Reply-To: <20260511111116.1109643-1-a.heider@gmail.com>
Enable i2c2 and add the connected 24c04 EEPROM.
It contains an ONIE TLV table:
=> tlv_eeprom
TLV: 0
[ 12.162] TlvInfo Header:
[ 12.162] Id String: TlvInfo
[ 12.165] Version: 1
[ 12.168] Total Length: 58
[ 12.171] TLV Name Code Len Value
[ 12.175] -------------------- ---- --- -----
[ 12.179] Product Name 0x21 16 k1-x_MUSE-Pi-Pro
[ 12.184] Serial Number 0x23 17 BPMIMXXXXXXXXXXXX
[ 12.189] Unknown 0x41 1 0x02
[ 12.194] Base MAC Address 0x24 6 FE:FE:FE:XX:XX:XX
[ 12.199] MAC Addresses 0x2A 2 2
[ 12.203] CRC-32 0xFE 4 0x395ECD34
[ 12.207] Checksum is valid.
(With 0x41 as TLV_CODE_DDR_CSNUM)
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
.../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 35 ++++++++++++++++++-
1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 88c35ad1ef2ae..79415d760f162 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -17,6 +17,7 @@ / {
aliases {
ethernet0 = ð0;
serial0 = &uart0;
+ i2c2 = &i2c2;
i2c8 = &i2c8;
};
@@ -92,6 +93,38 @@ &pdma {
status = "okay";
};
+&i2c2 {
+ pinctrl-0 = <&i2c2_0_cfg>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
+ pagesize = <8>;
+ read-only;
+ size = <256>;
+
+ nvmem-layout {
+ compatible = "onie,tlv-layout";
+
+ product-name {
+ };
+
+ serial-number {
+ };
+
+ mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+
+ num-macs {
+ };
+ };
+ };
+};
+
&i2c8 {
pinctrl-0 = <&i2c8_cfg>;
pinctrl-names = "default";
@@ -126,7 +159,7 @@ buck2 {
regulator-always-on;
};
- buck3 {
+ buck3_1v8: buck3 {
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1800000>;
regulator-ramp-delay = <5000>;
--
2.53.0
next prev parent reply other threads:[~2026-05-11 11:11 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 11:11 [PATCH v2 0/6] spacemit: k1-musepi-pro: add missing devices Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-11 11:11 ` [PATCH v2 1/6] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-12 2:14 ` sashiko-bot
2026-05-12 11:39 ` Yixun Lan
2026-05-12 11:39 ` Yixun Lan
2026-05-12 12:20 ` Andre Heider
2026-05-12 12:20 ` Andre Heider
2026-05-12 22:53 ` Yixun Lan
2026-05-12 22:53 ` Yixun Lan
2026-05-11 11:11 ` Andre Heider [this message]
2026-05-11 11:11 ` [PATCH v2 2/6] riscv: dts: spacemit: k1-musepi-pro: add 24c04 eeprom Andre Heider
2026-05-12 2:18 ` sashiko-bot
2026-05-11 11:11 ` [PATCH v2 3/6] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-12 2:28 ` sashiko-bot
2026-05-12 6:51 ` Andre Heider
2026-05-12 11:55 ` Rob Herring
2026-05-12 12:18 ` Andre Heider
2026-05-12 11:44 ` Yixun Lan
2026-05-12 11:44 ` Yixun Lan
2026-05-11 11:11 ` [PATCH v2 4/6] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-11 11:11 ` [PATCH v2 5/6] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-12 4:02 ` sashiko-bot
2026-05-12 11:34 ` Yixun Lan
2026-05-12 11:34 ` Yixun Lan
2026-05-11 11:11 ` [PATCH v2 6/6] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate Andre Heider
2026-05-11 11:11 ` Andre Heider
2026-05-12 11:35 ` Yixun Lan
2026-05-12 11:35 ` Yixun Lan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260511111116.1109643-3-a.heider@gmail.com \
--to=a.heider@gmail.com \
--cc=alex@ghiti.fr \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlan@gentoo.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=robh@kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.