[PATCH v2 6/6] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate

From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v2 6/6] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate
Date: Mon, 11 May 2026 13:11:13 +0200	[thread overview]
Message-ID: <20260511111116.1109643-7-a.heider@gmail.com> (raw)
In-Reply-To: <20260511111116.1109643-1-a.heider@gmail.com>

Allow serial output with the same uboot/opensbi settings so the
console works without providing a cmdline.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 2d3e30f0bd806..c8bf776511c94 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -22,7 +22,7 @@ aliases {
 	};
 
 	chosen {
-		stdout-path = "serial0";
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
