[PATCH i-g-t v5 6/7] tests/intel/kms_pm_dc: Add new test for DC3CO recovery after DC6

[Jeevan B <jeevan.b@intel.com>]

Adds a test to verify DC3CO continues to function properly
after a DC6 power cycle.

Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
 tests/intel/kms_pm_dc.c | 61 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index 4497cffb7..397f13d02 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -55,6 +55,11 @@
  * Description: Verify that DC3CO entry does not cause frame drops and successfully
  *              enters the power state
  *
+ * SUBTEST: dc3co-after-dc6
+ * Description: Verify DC3CO entry is still functional after a DC6 entry and
+ *              exit cycle, ensuring DC3CO is not broken by deeper power state
+ *              transitions.
+ *
  * SUBTEST: dc5-dpms
  * Description: Validate display engine entry to DC5 state while all connectors's
  *              DPMS property set to OFF
@@ -628,6 +633,35 @@ static int has_panels_without_dc_support(igt_display_t *display)
 	return external_panel;
 }
 
+static void test_dc3co_after_dc6(data_t *data)
+{
+	uint32_t dc6_prev_cnt;
+
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC3CO);
+	igt_require_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC6);
+
+	setup_output(data);
+
+	/* Enable PSR2/PR */
+	setup_dc3co(data);
+
+	/* Trigger a DC6 cycle */
+	dc6_prev_cnt = igt_read_dc_counter(data->debugfs_fd, IGT_INTEL_CHECK_DC6);
+	setup_dc_dpms(data);
+	dpms_off(data);
+	assert_dc_counter(data, IGT_INTEL_CHECK_DC6, dc6_prev_cnt);
+	dpms_on(data);
+	cleanup_dc_dpms(data);
+
+	/* Re-enable PSR2/PR after DC6 exit */
+	setup_dc3co(data);
+
+	/* Verify DC3CO still works after DC6 */
+	setup_videoplayback(data);
+	check_dc3co_with_videoplayback_like_load(data);
+	cleanup_dc3co_fbs(data);
+}
+
 static void test_deep_pkgc_state(data_t *data)
 {
 	unsigned int pre_val = 0, cur_val = 0;
@@ -801,6 +835,33 @@ int igt_main()
 		}
 	}
 
+	igt_describe("Verify DC3CO entry is still functional after a DC6 entry "
+		     "and exit cycle");
+	igt_subtest_with_dynamic("dc3co-after-dc6") {
+		igt_dynamic("psr2") {
+			data.op_psr_mode = PSR_MODE_2;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(IS_TIGERLAKE(data.devid) ||
+				      intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with PSR2\n");
+			igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
+				      "PC8+ residencies not supported\n");
+			test_dc3co_after_dc6(&data);
+		}
+
+		igt_dynamic("pr") {
+			data.op_psr_mode = PR_MODE;
+			igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
+					     data.op_psr_mode, NULL));
+			igt_require_f(intel_display_ver(data.devid) >= 35,
+				      "Platform does not support DC3CO with Panel Replay\n");
+			igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
+				      "PC8+ residencies not supported\n");
+			test_dc3co_after_dc6(&data);
+		}
+	}
+
 	igt_describe("This test validates display engine entry to DC5 state "
 		     "while PSR is active");
 	igt_subtest("dc5-psr") {
-- 
2.43.0