All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/6] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure
Date: Wed, 13 May 2026 09:19:49 +0200	[thread overview]
Message-ID: <20260513071958.29574-2-a.heider@gmail.com> (raw)
In-Reply-To: <20260513071958.29574-1-a.heider@gmail.com>

Enable i2c8 and add the connected SpacemiT P1 PMIC with its related regulators
for the board's power infrastructure and voltage regulation support.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 29e333b670cf0..e0b585c50014b 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -17,6 +17,7 @@ / {
 	aliases {
 		ethernet0 = &eth0;
 		serial0 = &uart0;
+		i2c8 = &i2c8;
 	};
 
 	chosen {
@@ -33,6 +34,15 @@ led1 {
 			default-state = "on";
 		};
 	};
+
+	reg_vcc_4v0: regulator-vcc-4v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC4V0";
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &emmc {
@@ -72,6 +82,130 @@ &pdma {
 	status = "okay";
 };
 
+&i2c8 {
+	pinctrl-0 = <&i2c8_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		vin1-supply = <&reg_vcc_4v0>;
+		vin2-supply = <&reg_vcc_4v0>;
+		vin3-supply = <&reg_vcc_4v0>;
+		vin4-supply = <&reg_vcc_4v0>;
+		vin5-supply = <&reg_vcc_4v0>;
+		vin6-supply = <&reg_vcc_4v0>;
+		aldoin-supply = <&reg_vcc_4v0>;
+		dldoin1-supply = <&buck5>;
+		dldoin2-supply = <&buck5>;
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3_1v8: buck3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4_3v3: buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			aldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			dldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo7 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	pinctrl-names = "default";
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v3 1/6] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure
Date: Wed, 13 May 2026 09:19:49 +0200	[thread overview]
Message-ID: <20260513071958.29574-2-a.heider@gmail.com> (raw)
In-Reply-To: <20260513071958.29574-1-a.heider@gmail.com>

Enable i2c8 and add the connected SpacemiT P1 PMIC with its related regulators
for the board's power infrastructure and voltage regulation support.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 134 ++++++++++++++++++
 1 file changed, 134 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 29e333b670cf0..e0b585c50014b 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -17,6 +17,7 @@ / {
 	aliases {
 		ethernet0 = &eth0;
 		serial0 = &uart0;
+		i2c8 = &i2c8;
 	};
 
 	chosen {
@@ -33,6 +34,15 @@ led1 {
 			default-state = "on";
 		};
 	};
+
+	reg_vcc_4v0: regulator-vcc-4v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC4V0";
+		regulator-min-microvolt = <4000000>;
+		regulator-max-microvolt = <4000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
 };
 
 &emmc {
@@ -72,6 +82,130 @@ &pdma {
 	status = "okay";
 };
 
+&i2c8 {
+	pinctrl-0 = <&i2c8_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic@41 {
+		compatible = "spacemit,p1";
+		reg = <0x41>;
+		interrupts = <64>;
+		vin1-supply = <&reg_vcc_4v0>;
+		vin2-supply = <&reg_vcc_4v0>;
+		vin3-supply = <&reg_vcc_4v0>;
+		vin4-supply = <&reg_vcc_4v0>;
+		vin5-supply = <&reg_vcc_4v0>;
+		vin6-supply = <&reg_vcc_4v0>;
+		aldoin-supply = <&reg_vcc_4v0>;
+		dldoin1-supply = <&buck5>;
+		dldoin2-supply = <&buck5>;
+
+		regulators {
+			buck1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck3_1v8: buck3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck4_3v3: buck4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck5: buck5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			buck6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3450000>;
+				regulator-ramp-delay = <5000>;
+				regulator-always-on;
+			};
+
+			aldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			aldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			aldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo1 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+			};
+
+			dldo2 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo3 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo4 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo5 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+
+			dldo6 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-always-on;
+			};
+
+			dldo7 {
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3400000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	pinctrl-names = "default";
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2026-05-13  7:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13  7:19 [PATCH v3 0/6] spacemit: k1-musepi-pro: add missing devices Andre Heider
2026-05-13  7:19 ` Andre Heider
2026-05-13  7:19 ` Andre Heider [this message]
2026-05-13  7:19   ` [PATCH v3 1/6] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure Andre Heider
2026-05-13  7:48   ` Yixun Lan
2026-05-13  7:48     ` Yixun Lan
2026-05-13  8:02   ` Yixun Lan
2026-05-13  8:02     ` Yixun Lan
2026-05-14  2:28   ` sashiko-bot
2026-05-13  7:19 ` [PATCH v3 2/6] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 3/6] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-14  2:53   ` sashiko-bot
2026-05-13  7:19 ` [PATCH v3 4/6] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 5/6] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 6/6] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:46 ` [PATCH v3 0/6] spacemit: k1-musepi-pro: add missing devices Yixun Lan
2026-05-13  7:46   ` Yixun Lan
2026-05-13  7:56   ` Andre Heider
2026-05-13  7:56     ` Andre Heider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260513071958.29574-2-a.heider@gmail.com \
    --to=a.heider@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.