All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/6] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR
Date: Wed, 13 May 2026 09:19:51 +0200	[thread overview]
Message-ID: <20260513071958.29574-4-a.heider@gmail.com> (raw)
In-Reply-To: <20260513071958.29574-1-a.heider@gmail.com>

Add the QSPI controller node and describe the attached SPI NOR flash
(Winbond W25Q64FWSSAQ).

Add a corresponding vendor flash partition layout.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 41d7d6d20a797..b0f66f49db4b7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -44,6 +44,15 @@ reg_vcc_4v0: regulator-vcc-4v0 {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_qspi_vcc1v833: regulator-qspi-vcc1v833 {
+		compatible = "regulator-fixed";
+		regulator-name = "QSPI_VCC1833";
+		regulator-min-microvolt = <1833000>;
+		regulator-max-microvolt = <1833000>;
+		regulator-always-on;
+		vin-supply = <&buck4_3v3>;
+	};
 };
 
 &emmc {
@@ -239,6 +248,47 @@ dldo7 {
 	};
 };
 
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_cfg>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <26500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_qspi_vcc1v833>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootinfo@0 {
+				reg = <0x0 0x10000>;
+			};
+			private@10000 {
+				reg = <0x10000 0x10000>;
+			};
+			fsbl@20000 {
+				reg = <0x20000 0x40000>;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			opensbi@70000 {
+				reg = <0x70000 0x30000>;
+			};
+			uboot@a0000 {
+				reg = <0xa0000 0x760000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	pinctrl-names = "default";
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Andre Heider <a.heider@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@gentoo.org>
Cc: devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
	spacemit@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/6] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR
Date: Wed, 13 May 2026 09:19:51 +0200	[thread overview]
Message-ID: <20260513071958.29574-4-a.heider@gmail.com> (raw)
In-Reply-To: <20260513071958.29574-1-a.heider@gmail.com>

Add the QSPI controller node and describe the attached SPI NOR flash
(Winbond W25Q64FWSSAQ).

Add a corresponding vendor flash partition layout.

Signed-off-by: Andre Heider <a.heider@gmail.com>
---
 .../riscv/boot/dts/spacemit/k1-musepi-pro.dts | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
index 41d7d6d20a797..b0f66f49db4b7 100644
--- a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -44,6 +44,15 @@ reg_vcc_4v0: regulator-vcc-4v0 {
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	reg_qspi_vcc1v833: regulator-qspi-vcc1v833 {
+		compatible = "regulator-fixed";
+		regulator-name = "QSPI_VCC1833";
+		regulator-min-microvolt = <1833000>;
+		regulator-max-microvolt = <1833000>;
+		regulator-always-on;
+		vin-supply = <&buck4_3v3>;
+	};
 };
 
 &emmc {
@@ -239,6 +248,47 @@ dldo7 {
 	};
 };
 
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_cfg>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <26500000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		vcc-supply = <&reg_qspi_vcc1v833>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootinfo@0 {
+				reg = <0x0 0x10000>;
+			};
+			private@10000 {
+				reg = <0x10000 0x10000>;
+			};
+			fsbl@20000 {
+				reg = <0x20000 0x40000>;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			opensbi@70000 {
+				reg = <0x70000 0x30000>;
+			};
+			uboot@a0000 {
+				reg = <0xa0000 0x760000>;
+			};
+		};
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_2_cfg>;
 	pinctrl-names = "default";
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2026-05-13  7:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-13  7:19 [PATCH v3 0/6] spacemit: k1-musepi-pro: add missing devices Andre Heider
2026-05-13  7:19 ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 1/6] riscv: dts: spacemit: k1-musepi-pro: add PMIC and power infrastructure Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:48   ` Yixun Lan
2026-05-13  7:48     ` Yixun Lan
2026-05-13  8:02   ` Yixun Lan
2026-05-13  8:02     ` Yixun Lan
2026-05-14  2:28   ` sashiko-bot
2026-05-13  7:19 ` [PATCH v3 2/6] riscv: dts: spacemit: k1-musepi-pro: add 24c02 eeprom Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` Andre Heider [this message]
2026-05-13  7:19   ` [PATCH v3 3/6] riscv: dts: spacemit: k1-musepi-pro: enable QSPI and add SPI NOR Andre Heider
2026-05-14  2:53   ` sashiko-bot
2026-05-13  7:19 ` [PATCH v3 4/6] riscv: dts: spacemit: k1-musepi-pro: enable USB 3 ports Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 5/6] riscv: dts: spacemit: k1-musepi-pro: enable PCIe ports Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:19 ` [PATCH v3 6/6] riscv: dts: spacemit: k1-musepi-pro: set default console baud rate Andre Heider
2026-05-13  7:19   ` Andre Heider
2026-05-13  7:46 ` [PATCH v3 0/6] spacemit: k1-musepi-pro: add missing devices Yixun Lan
2026-05-13  7:46   ` Yixun Lan
2026-05-13  7:56   ` Andre Heider
2026-05-13  7:56     ` Andre Heider

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260513071958.29574-4-a.heider@gmail.com \
    --to=a.heider@gmail.com \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@gentoo.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.