From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs
Date: Tue, 16 Jun 2026 00:41:41 +0000 [thread overview]
Message-ID: <20260616004155.1435766-13-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>
Refactor kvm_hv_purge_tlb_flush_fifo() to introduce an inner helper,
__kvm_hv_purge_tlb_flush_fifo(), parameterized by an optional FIFO. If a
FIFO is not passed in, all FIFOs are purged.
Note that KVM_REQ_HV_TLB_FLUSH is consumed by
__kvm_hv_purge_tlb_flush_fifo(), so a selective purge on one FIFO will
render any subsequent non-selective purge useless. This is not a problem
because purging TLB flush FIFOs is an optimization (and there are
currently no users of the non-selective purges).
No functional change intended as a FIFO is always being passed in now.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
arch/x86/kvm/hyperv.h | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/hyperv.h b/arch/x86/kvm/hyperv.h
index a5c52e4b24b2a..0f64038408072 100644
--- a/arch/x86/kvm/hyperv.h
+++ b/arch/x86/kvm/hyperv.h
@@ -204,16 +204,31 @@ static inline struct kvm_vcpu_hv_tlb_flush_fifo *kvm_hv_get_tlb_flush_fifo(struc
return &hv_vcpu->tlb_flush_fifo[i];
}
-static inline void kvm_hv_purge_tlb_flush_fifo(struct kvm_vcpu *vcpu)
+/* Purge pending TLB flushes in @fifo, or in all FIFOs if @fifo is NULL */
+static inline void __kvm_hv_purge_tlb_flush_fifo(struct kvm_vcpu *vcpu,
+ struct kvm_vcpu_hv_tlb_flush_fifo *fifo)
{
- struct kvm_vcpu_hv_tlb_flush_fifo *tlb_flush_fifo;
+ struct kvm_vcpu_hv *hv_vcpu = to_hv_vcpu(vcpu);
+ int i;
- if (!to_hv_vcpu(vcpu) || !kvm_check_request(KVM_REQ_HV_TLB_FLUSH, vcpu))
+ if (!hv_vcpu || !kvm_check_request(KVM_REQ_HV_TLB_FLUSH, vcpu))
return;
- tlb_flush_fifo = kvm_hv_get_tlb_flush_fifo(vcpu, is_guest_mode(vcpu));
+ for (i = 0; i < ARRAY_SIZE(hv_vcpu->tlb_flush_fifo); i++) {
+ if (!fifo || fifo == &hv_vcpu->tlb_flush_fifo[i])
+ kfifo_reset_out(&hv_vcpu->tlb_flush_fifo[i].entries);
+ }
+}
+
+static inline void kvm_hv_purge_tlb_flush_fifo(struct kvm_vcpu *vcpu)
+{
+ struct kvm_vcpu_hv_tlb_flush_fifo *fifo;
+
+ if (!to_hv_vcpu(vcpu))
+ return;
- kfifo_reset_out(&tlb_flush_fifo->entries);
+ fifo = kvm_hv_get_tlb_flush_fifo(vcpu, is_guest_mode(vcpu));
+ __kvm_hv_purge_tlb_flush_fifo(vcpu, fifo);
}
static inline bool guest_hv_cpuid_has_l2_tlb_flush(struct kvm_vcpu *vcpu)
--
2.54.0.1136.gdb2ca164c4-goog
next prev parent reply other threads:[~2026-06-16 0:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-16 0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16 1:06 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16 1:08 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16 0:41 ` Yosry Ahmed [this message]
2026-06-16 0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16 1:05 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16 1:20 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16 1:30 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
2026-06-16 1:21 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260616004155.1435766-13-yosry@kernel.org \
--to=yosry@kernel.org \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.