From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter
Date: Tue, 16 Jun 2026 00:41:49 +0000 [thread overview]
Message-ID: <20260616004155.1435766-21-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>
Stop clearing TLB_CONTROL when preparing the control area of vmcb02, as
this potentially undos pending TLB flushes for L2 (e.g. through
KVM_REQ_TLB_FLUSH while L1 is running), and remove the associated TODO
comment.
This is currently harmless, because nested_svm_entry_tlb_flush() always
requests KVM_REQ_TLB_FLUSH_CURRENT on nested VM-Enter, which sets
TLB_CONTROL again before L2 is actually run. However, always flushing
will soon go away with proper TLB handling for L2, at which point always
clearing TLB_CONTROL would be a bug.
Clearing TLB_CONTROL on nested VM-Enter was probably done because
TLB_CONTROL is not cleared by the CPU on VM-Exit. However, KVM always
clears TLB_CONTROL in the active VMCB after VMRUN. Hence, at nested
VM-Enter, TLB_CONTROL in vmcb02 can only be non-zero if a TLB flush is
queued for L2 while L1 is running (i.e. KVM_REQ_TLB_FLUSH), and that
should never be ignored.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
arch/x86/kvm/svm/nested.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index f91c22e72151e..a226aca8f9108 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -719,12 +719,7 @@ static void nested_svm_entry_tlb_flush(struct kvm_vcpu *vcpu)
kvm_make_request(KVM_REQ_TLB_FLUSH_GUEST, vcpu);
}
- /*
- * TODO: optimize unconditional TLB flush/MMU sync. A partial list of
- * things to fix before this can be conditional:
- *
- * - Don't crush a pending TLB flush in vmcb02 on nested VMRUN
- */
+ /* TODO: optimize unconditional TLB flush/MMU sync */
kvm_make_request(KVM_REQ_MMU_SYNC, vcpu);
kvm_make_request(KVM_REQ_TLB_FLUSH_CURRENT, vcpu);
}
@@ -981,9 +976,6 @@ static void nested_vmcb02_prepare_control(struct vcpu_svm *svm)
vmcb02->control.asid = svm->nested.asid02;
- /* Overwritten later if necessary. */
- vmcb_clr_flush_asid(vmcb02);
-
/* Use vmcb01 MMU and format if guest does not use nNPT */
if (nested_npt_enabled(svm)) {
vmcb02->control.misc_ctl &= ~SVM_MISC_ENABLE_GMET;
--
2.54.0.1136.gdb2ca164c4-goog
next prev parent reply other threads:[~2026-06-16 0:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-16 0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16 1:06 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16 1:08 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16 1:05 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16 1:20 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16 0:41 ` Yosry Ahmed [this message]
2026-06-16 0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16 1:30 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
2026-06-16 1:21 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260616004155.1435766-21-yosry@kernel.org \
--to=yosry@kernel.org \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.