From: Yosry Ahmed <yosry@kernel.org>
To: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>,
Maxim Levitsky <mlevitsk@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Tom Lendacky <thomas.lendacky@amd.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Yosry Ahmed <yosry@kernel.org>
Subject: [RFC PATCH v2 07/25] KVM: SVM: Duplicate pre-run ASID check for SEV and non-SEV guests
Date: Tue, 16 Jun 2026 00:41:36 +0000 [thread overview]
Message-ID: <20260616004155.1435766-8-yosry@kernel.org> (raw)
In-Reply-To: <20260616004155.1435766-1-yosry@kernel.org>
In preparation for dropping the check for non-SEV VMs, duplicate the
check between pre_sev_run() and pre_svm_run() (for the non-SEV code
path).
Opportunistically drop the unconditional dirtying of VMCB_ASID, as it's
only needed when the ASID is actually updated in the VMCB, not when
TLB_CONTROL is updated (as the code currently reads).
No functional change intended.
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
---
arch/x86/kvm/svm/sev.c | 6 +++++-
arch/x86/kvm/svm/svm.c | 9 +++++----
2 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 026b070522dac..3c873c88894b3 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -3558,6 +3558,11 @@ int pre_sev_run(struct vcpu_svm *svm, int cpu)
/* Assign the asid allocated with this SEV guest */
svm->asid = asid;
+ if (unlikely(svm->asid != svm->vmcb->control.asid)) {
+ svm->vmcb->control.asid = asid;
+ vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
+ }
+
/*
* Flush guest TLB:
*
@@ -3570,7 +3575,6 @@ int pre_sev_run(struct vcpu_svm *svm, int cpu)
sd->sev_vmcbs[asid] = svm->vmcb;
vmcb_set_flush_asid(svm->vmcb);
- vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
return 0;
}
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 159abf841738f..5d4c45d788b54 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3766,6 +3766,11 @@ static int pre_svm_run(struct kvm_vcpu *vcpu)
if (svm->current_vmcb->asid_generation != sd->asid_generation)
new_asid(svm, sd);
+ if (unlikely(svm->asid != svm->vmcb->control.asid)) {
+ svm->vmcb->control.asid = svm->asid;
+ vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
+ }
+
return 0;
}
@@ -4502,10 +4507,6 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)
sync_lapic_to_cr8(vcpu);
- if (unlikely(svm->asid != svm->vmcb->control.asid)) {
- svm->vmcb->control.asid = svm->asid;
- vmcb_mark_dirty(svm->vmcb, VMCB_ASID);
- }
svm->vmcb->save.cr2 = vcpu->arch.cr2;
if (guest_cpu_cap_has(vcpu, X86_FEATURE_ERAPS) &&
--
2.54.0.1136.gdb2ca164c4-goog
next prev parent reply other threads:[~2026-06-16 0:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-16 0:41 [RFC PATCH v2 00/25] Optimize nSVM TLB flushes Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 01/25] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 02/25] KVM: SVM: Passthrough the number of supported ASIDs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 03/25] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 04/25] KVM: x86/mmu: Support specifying a minimum TLB tag Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 05/25] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 06/25] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-06-16 0:41 ` Yosry Ahmed [this message]
2026-06-16 0:41 ` [RFC PATCH v2 08/25] KVM: SEV: Stop using per-vCPU ASID for SEV VMs Yosry Ahmed
2026-06-16 1:06 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 09/25] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-06-16 1:08 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 10/25] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 11/25] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 12/25] KVM: x86: hyper-v: Allow puring all TLB flush FIFOs Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 13/25] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-06-16 1:05 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 14/25] KVM: nSVM: Move svm_switch_vmcb() to nested.c Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 15/25] KVM: nSVM: Call nested_svm_transition_tlb_flush() on every VMCB switch Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 16/25] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 17/25] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-06-16 1:20 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 18/25] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 19/25] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 20/25] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 21/25] KVM: x86/mmu: rename __kvm_mmu_invalidate_addr() Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 22/25] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the gva flush Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 23/25] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-06-16 0:41 ` [RFC PATCH v2 24/25] KVM: nSVM: Use different ASIDs for L1 and L2 Yosry Ahmed
2026-06-16 1:30 ` sashiko-bot
2026-06-16 0:41 ` [RFC PATCH v2 25/25] DO NOT MERGE: Add nested_tlb_force_flush Yosry Ahmed
2026-06-16 1:21 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260616004155.1435766-8-yosry@kernel.org \
--to=yosry@kernel.org \
--cc=jmattson@google.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.