Re: [PATCH V15 7/9] iio: imu: inv_icm42607: Add Gyroscope to icm42607

[Jonathan Cameron <jic23@kernel.org>]

On Fri, 26 Jun 2026 11:12:28 -0500
Chris Morgan <macroalpha82@gmail.com> wrote:

> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add gyroscope functions to the icm42607 driver.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Similar comments to those in the accel driver.

Thanks,

Jonathan

> diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c
> new file mode 100644
> index 000000000000..c7215b3826ad
> --- /dev/null
> +++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_gyro.c

> +static int inv_icm42607_gyro_read_odr(struct inv_icm42607_state *st,
> +				      int *val, int *val2)
> +{
> +	unsigned int odr;
> +	unsigned int i;
> +
> +	guard(mutex)(&st->lock);
> +
> +	odr = st->conf.gyro.odr;
> +
> +	for (i = 5; i < ARRAY_SIZE(inv_icm42607_gyro_odr); ++i) {
> +		if (i == odr)

As below.

> +
> +static int inv_icm42607_gyro_write_odr(struct iio_dev *indio_dev,
> +				       int val, int val2)
> +{
> +	struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
> +	struct device *dev = regmap_get_device(st->map);
> +	unsigned int idx;
> +	struct inv_icm42607_sensor_conf conf = INV_ICM42607_SENSOR_CONF_INIT;
> +	int ret;
> +
> +	for (idx = 5; idx < ARRAY_SIZE(inv_icm42607_gyro_odr); ++idx) {

Similar comments to accel. Use the appropriate define for that 5 and
post increment.

> +		if (val == inv_icm42607_gyro_odr[idx][0] &&
> +		    val2 == inv_icm42607_gyro_odr[idx][1])
> +			break;
> +	}

> +static int inv_icm42607_gyro_read_avail(struct iio_dev *indio_dev,
> +					struct iio_chan_spec const *chan,
> +					const int **vals,
> +					int *type, int *length, long mask)
> +{
> +	if (chan->type != IIO_ANGL_VEL)

This was the one sashiko noted was less than ideal as it rules out
reading this for temperature channels - in practice that doesn't happen
but that is due to an internal detail of how we create shared_by_all
attributes. The code should support reading for temperature channels as well.

> +		return -EINVAL;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		*vals = (const int *)inv_icm42607_gyro_scale_nano;
> +		*type = IIO_VAL_INT_PLUS_NANO;
> +		*length = ARRAY_SIZE(inv_icm42607_gyro_scale_nano) * 2;
> +		return IIO_AVAIL_LIST;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		*vals = (const int *)inv_icm42607_gyro_odr[5];
> +		*type = IIO_VAL_INT_PLUS_MICRO;
> +		*length = (ARRAY_SIZE(inv_icm42607_gyro_odr) - 5) * 2;
> +		return IIO_AVAIL_LIST;
> +	default:
> +		return -EINVAL;
> +	}
> +}



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip