[PATCH v3 1/6] PCI: spacemit-k1: Add device data support

[Inochi Amaoto <inochiama@gmail.com>]

To reuse the K1 PCIe driver logic for K3 PCIe controller, add device
data to handle the K1 specific logic and make room for the incoming
logic for K3.

Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
---
 drivers/pci/controller/dwc/pcie-spacemit-k1.c | 30 ++++++++++++++++---
 1 file changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-spacemit-k1.c b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
index be20a520255b..f6ae8ff3589a 100644
--- a/drivers/pci/controller/dwc/pcie-spacemit-k1.c
+++ b/drivers/pci/controller/dwc/pcie-spacemit-k1.c
@@ -49,8 +49,17 @@
 #define PCIE_CONTROL_LOGIC			0x0004
 #define PCIE_SOFT_RESET			BIT(0)
 
+struct k1_pcie;
+
+struct k1_pcie_device_data {
+	const struct dw_pcie_host_ops *host_ops;
+	const struct dw_pcie_ops *ops;
+	int (*parse_port)(struct k1_pcie *k1);
+};
+
 struct k1_pcie {
 	struct dw_pcie pci;
+	const struct k1_pcie_device_data *data;
 	struct phy *phy;
 	void __iomem *link;
 	struct regmap *pmu;	/* Errors ignored; MMIO-backed regmap */
@@ -278,14 +287,21 @@ static int k1_pcie_parse_port(struct k1_pcie *k1)
 
 static int k1_pcie_probe(struct platform_device *pdev)
 {
+	const struct k1_pcie_device_data *data;
 	struct device *dev = &pdev->dev;
 	struct k1_pcie *k1;
 	int ret;
 
+	data = device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
 	k1 = devm_kzalloc(dev, sizeof(*k1), GFP_KERNEL);
 	if (!k1)
 		return -ENOMEM;
 
+	k1->data = data;
+
 	k1->pmu = syscon_regmap_lookup_by_phandle_args(dev_of_node(dev),
 						       SYSCON_APMU, 1,
 						       &k1->pmu_off);
@@ -299,11 +315,11 @@ static int k1_pcie_probe(struct platform_device *pdev)
 				     "failed to map \"link\" registers\n");
 
 	k1->pci.dev = dev;
-	k1->pci.ops = &k1_pcie_ops;
+	k1->pci.ops = data->ops;
 	k1->pci.pp.num_vectors = MAX_MSI_IRQS;
 	dw_pcie_cap_set(&k1->pci, REQ_RES);
 
-	k1->pci.pp.ops = &k1_pcie_host_ops;
+	k1->pci.pp.ops = data->host_ops;
 
 	/* Hold the PHY in reset until we start the link */
 	regmap_set_bits(k1->pmu, k1->pmu_off + PCIE_CLK_RESET_CONTROL,
@@ -320,7 +336,7 @@ static int k1_pcie_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, k1);
 
-	ret = k1_pcie_parse_port(k1);
+	ret = data->parse_port(k1);
 	if (ret)
 		return dev_err_probe(dev, ret, "failed to parse root port\n");
 
@@ -338,8 +354,14 @@ static void k1_pcie_remove(struct platform_device *pdev)
 	dw_pcie_host_deinit(&k1->pci.pp);
 }
 
+static const struct k1_pcie_device_data k1_pcie_device_data = {
+	.host_ops	= &k1_pcie_host_ops,
+	.ops		= &k1_pcie_ops,
+	.parse_port	= k1_pcie_parse_port,
+};
+
 static const struct of_device_id k1_pcie_of_match_table[] = {
-	{ .compatible = "spacemit,k1-pcie", },
+	{ .compatible = "spacemit,k1-pcie", .data = &k1_pcie_device_data},
 	{ }
 };
 
-- 
2.55.0