[PATCH v1 3/5] hw/misc/aspeed_scu: Add AST2700 SCUIO RNG control and data registers

[Jamin Lin <jamin_lin@aspeedtech.com>]

Implement basic behavior for RNG_CTRL and RNG_DATA:

- RNG_CTRL allows guest to enable/disable the RNG via the DIS bit.
  Only bits [0:3] and bit 5 are writable; other bits are masked.
- The VLD bit (bit 31) is updated by the model to reflect the RNG
  enable state, and is not writable by the guest.
- When RNG is enabled, reads from RNG_DATA return a newly generated
  random value.
- When RNG is disabled, RNG_DATA return 0.

This provides a minimal functional model of the RNG sufficient for
software that expects readable random data without modeling full
hardware behavior.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 hw/misc/aspeed_scu.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index ed7f5e648d..5dbf81c0ce 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -160,6 +160,11 @@
 #define AST2700_SCU_CPU_SCRATCH_1   TO_REG(0x784)
 #define AST2700_SCU_VGA_SCRATCH_0   TO_REG(0x900)
 
+#define AST2700_SCUIO_RNG_CTRL          TO_REG(0xF0)
+#define AST2700_SCUIO_RNG_CTRL_MASK     0x2F
+#define AST2700_SCUIO_RNG_CTRL_DIS      BIT(0)
+#define AST2700_SCUIO_RNG_CTRL_VLD      BIT(31)
+#define AST2700_SCUIO_RNG_DATA          TO_REG(0xF4)
 #define AST2700_SCUIO_CLK_STOP_CTL_1    TO_REG(0x240)
 #define AST2700_SCUIO_CLK_STOP_CLR_1    TO_REG(0x244)
 #define AST2700_SCUIO_CLK_STOP_CTL_2    TO_REG(0x260)
@@ -954,6 +959,14 @@ static uint64_t aspeed_ast2700_scuio_read(void *opaque, hwaddr offset,
         return 0;
     }
 
+    switch (reg) {
+    case AST2700_SCUIO_RNG_DATA:
+        if (!(s->regs[AST2700_SCUIO_RNG_CTRL] & AST2700_SCUIO_RNG_CTRL_DIS)) {
+            s->regs[AST2700_SCUIO_RNG_DATA] = aspeed_scu_get_random();
+        }
+        break;
+    }
+
     trace_aspeed_ast2700_scuio_read(offset, size, s->regs[reg]);
     return s->regs[reg];
 }
@@ -977,6 +990,18 @@ static void aspeed_ast2700_scuio_write(void *opaque, hwaddr offset,
     trace_aspeed_ast2700_scuio_write(offset, size, data);
 
     switch (reg) {
+    case AST2700_SCUIO_RNG_CTRL:
+        data &= AST2700_SCUIO_RNG_CTRL_MASK;
+        if (data & AST2700_SCUIO_RNG_CTRL_DIS) {
+            data &= ~AST2700_SCUIO_RNG_CTRL_VLD;
+            s->regs[AST2700_SCUIO_RNG_DATA] = 0;
+        } else {
+            s->regs[AST2700_SCUIO_RNG_DATA] = aspeed_scu_get_random();
+            data |= AST2700_SCUIO_RNG_CTRL_VLD;
+        }
+        s->regs[reg] = data;
+        updated = true;
+        break;
     case AST2700_SCUIO_CLK_STOP_CTL_1:
     case AST2700_SCUIO_CLK_STOP_CTL_2:
         s->regs[reg] |= data;
-- 
2.43.0