All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V SPACEMIT SoC
	Support),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 1/3] riscv: dts: spacemit: Add cpu scaling for Milk-V Jupiter
Date: Tue, 28 Jul 2026 23:05:06 +0200	[thread overview]
Message-ID: <20260728211020.1248676-2-aurelien@aurel32.net> (raw)
In-Reply-To: <20260728211020.1248676-1-aurelien@aurel32.net>

Enable CPU DVFS on Milk-V Jupiter by including the OPP tables and wiring the
CPU nodes to the CPU regulator supply.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 .../boot/dts/spacemit/k1-milkv-jupiter.dts    | 35 ++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index b61f5995ec771..3c16d0c20050e 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -5,6 +5,7 @@
  */
 
 #include "k1.dtsi"
+#include "k1-opp.dtsi"
 #include "k1-pinctrl.dtsi"
 
 / {
@@ -107,6 +108,38 @@ &combo_phy {
 	status = "okay";
 };
 
+&cpu_0 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_1 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_2 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_3 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_4 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_5 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_6 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_7 {
+	cpu-supply = <&buck1_0v9>;
+};
+
 &emmc {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
@@ -209,7 +242,7 @@ pmic@41 {
 		dldoin2-supply = <&buck5>;
 
 		regulators {
-			buck1 {
+			buck1_0v9: buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3450000>;
 				regulator-ramp-delay = <5000>;
-- 
2.53.0


WARNING: multiple messages have this Message-ID (diff)
From: Aurelien Jarno <aurelien@aurel32.net>
To: linux-kernel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Paul Walmsley <pjw@kernel.org>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Alexandre Ghiti <alex@ghiti.fr>, Yixun Lan <dlan@kernel.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-riscv@lists.infradead.org (open list:RISC-V SPACEMIT SoC
	Support),
	spacemit@lists.linux.dev (open list:RISC-V SPACEMIT SoC Support)
Subject: [PATCH 1/3] riscv: dts: spacemit: Add cpu scaling for Milk-V Jupiter
Date: Tue, 28 Jul 2026 23:05:06 +0200	[thread overview]
Message-ID: <20260728211020.1248676-2-aurelien@aurel32.net> (raw)
In-Reply-To: <20260728211020.1248676-1-aurelien@aurel32.net>

Enable CPU DVFS on Milk-V Jupiter by including the OPP tables and wiring the
CPU nodes to the CPU regulator supply.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 .../boot/dts/spacemit/k1-milkv-jupiter.dts    | 35 ++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index b61f5995ec771..3c16d0c20050e 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -5,6 +5,7 @@
  */
 
 #include "k1.dtsi"
+#include "k1-opp.dtsi"
 #include "k1-pinctrl.dtsi"
 
 / {
@@ -107,6 +108,38 @@ &combo_phy {
 	status = "okay";
 };
 
+&cpu_0 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_1 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_2 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_3 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_4 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_5 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_6 {
+	cpu-supply = <&buck1_0v9>;
+};
+
+&cpu_7 {
+	cpu-supply = <&buck1_0v9>;
+};
+
 &emmc {
 	bus-width = <8>;
 	mmc-hs400-1_8v;
@@ -209,7 +242,7 @@ pmic@41 {
 		dldoin2-supply = <&buck5>;
 
 		regulators {
-			buck1 {
+			buck1_0v9: buck1 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <3450000>;
 				regulator-ramp-delay = <5000>;
-- 
2.53.0


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2026-07-28 21:10 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-28 21:05 [PATCH 0/3] riscv: dts: spacemit: Add cpu scaling for Milk-V Jupiter Aurelien Jarno
2026-07-28 21:05 ` Aurelien Jarno
2026-07-28 21:05 ` Aurelien Jarno [this message]
2026-07-28 21:05   ` [PATCH 1/3] " Aurelien Jarno
2026-07-28 21:19   ` sashiko-bot
2026-07-28 21:05 ` [PATCH 2/3] riscv: dts: spacemit: Add a common board dtsi for Milk-V Jupiter boards Aurelien Jarno
2026-07-28 21:05   ` Aurelien Jarno
2026-07-28 21:23   ` sashiko-bot
2026-07-28 21:05 ` [PATCH 3/3] riscv: dts: spacemit: Add Milk-V Jupiter board (M1) Aurelien Jarno
2026-07-28 21:05   ` Aurelien Jarno
2026-07-28 21:28   ` sashiko-bot
2026-07-29  1:32 ` [PATCH 0/3] riscv: dts: spacemit: Add cpu scaling for Milk-V Jupiter Yixun Lan
2026-07-29  1:32   ` Yixun Lan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260728211020.1248676-2-aurelien@aurel32.net \
    --to=aurelien@aurel32.net \
    --cc=alex@ghiti.fr \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dlan@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=pjw@kernel.org \
    --cc=robh@kernel.org \
    --cc=spacemit@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.