[PATCH v5 0/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[PATCH v5 0/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This series is split from the v15 "Add Type-C DP support for RK3399 EVB
IND board" series [1]. It focuses on the DRM bridge and Rockchip
platform CDN-DP controller changes.

[1] https://lore.kernel.org/all/20260304094152.92-1-kernel@airkyi.com/

====
1. Generic Type-C DP HPD bridge

Currently, several USB-C controller drivers register their own DP HPD
bridge via aux-hpd-bridge.c, each duplicating the same logic. For
devicetree based platforms, the USB-C controller may vary across boards,
and not every USB-C controller driver implements this feature. Patch 1
implements a generic DP HPD bridge that monitors Type-C bus events and
automatically creates an HPD bridge when a Type-C port device with DP
SVID is registered.

2. Multiple bridge model for CDN-DP

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. Patch 5
introduces a multi-bridge model where each PHY port gets a separate
encoder and bridge, allowing flexible selection of the output PHY port.
This is based on the DRM AUX HPD bridge rather than extcon.

====
Patch 1 adds generic USB Type-C DP HPD bridge (Dmitry, Heikki).
Patch 2 add module soft depend for USB Type-C DP HPD bridge(Sebastian).
Patch 3 adds new API drm_aux_bridge_register_from_node() (Neil).
Patch 4 adds DRM AUX bridge support for RK3399 USBDP PHY (Neil).
Patch 5 drops CDN-DP's extcon dependency when Type-C is present (Dmitry).
Patch 6 adds multiple bridges to support PHY port selection (Dmitry, Luca).

Changes in v5:
- Link to v4: https://lore.kernel.org/all/20260727064408.101-1-kernel@airkyi.com/
- Add module soft depend for USB Type-C DP HPD bridge.

Changes in v4:
- Link to v3: https://lore.kernel.org/all/20260717072323.96-1-kernel@airkyi.com/
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

Changes in v3:
- Link to v2: https://lore.kernel.org/all/20260608070805.88-1-kernel@airkyi.com/
  (Sorry, I forgot to add the "v2" title, so it looks like v1.)
- Remove now-redundant call to drm_connector_attach_encoder()
- Rebase to v7.2-rc2

Changes in v2:
- Link to v1: https://lore.kernel.org/all/20260521032854.103-1-kernel@airkyi.com/
- Add copyright text.
- Remove useless goto.
- Fix incorrect function names in the documentation comments.
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.

Chaoyi Chen (6):
  drm/bridge: Implement generic USB Type-C DP HPD bridge
  drm/display: Add soft depend for aux-hpd-typec-dp-bridge module
  drm/bridge: aux: Add drm_aux_bridge_register_from_node()
  phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
  drm/rockchip: cdn-dp: Support handle lane info without extcon
  drm/rockchip: cdn-dp: Add multiple bridges to support PHY port
    selection

 drivers/gpu/drm/bridge/Kconfig                |  10 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/aux-bridge.c           |  26 +-
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  |  64 ++++
 .../gpu/drm/display/drm_display_helper_mod.c  |   1 +
 drivers/gpu/drm/rockchip/Kconfig              |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c        | 358 ++++++++++++++----
 drivers/gpu/drm/rockchip/cdn-dp-core.h        |  18 +-
 drivers/phy/rockchip/Kconfig                  |   2 +
 drivers/phy/rockchip/phy-rockchip-typec.c     |  13 +-
 include/drm/bridge/aux-bridge.h               |   6 +
 11 files changed, 429 insertions(+), 71 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 0/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This series is split from the v15 "Add Type-C DP support for RK3399 EVB
IND board" series [1]. It focuses on the DRM bridge and Rockchip
platform CDN-DP controller changes.

[1] https://lore.kernel.org/all/20260304094152.92-1-kernel@airkyi.com/

====
1. Generic Type-C DP HPD bridge

Currently, several USB-C controller drivers register their own DP HPD
bridge via aux-hpd-bridge.c, each duplicating the same logic. For
devicetree based platforms, the USB-C controller may vary across boards,
and not every USB-C controller driver implements this feature. Patch 1
implements a generic DP HPD bridge that monitors Type-C bus events and
automatically creates an HPD bridge when a Type-C port device with DP
SVID is registered.

2. Multiple bridge model for CDN-DP

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. Patch 5
introduces a multi-bridge model where each PHY port gets a separate
encoder and bridge, allowing flexible selection of the output PHY port.
This is based on the DRM AUX HPD bridge rather than extcon.

====
Patch 1 adds generic USB Type-C DP HPD bridge (Dmitry, Heikki).
Patch 2 add module soft depend for USB Type-C DP HPD bridge(Sebastian).
Patch 3 adds new API drm_aux_bridge_register_from_node() (Neil).
Patch 4 adds DRM AUX bridge support for RK3399 USBDP PHY (Neil).
Patch 5 drops CDN-DP's extcon dependency when Type-C is present (Dmitry).
Patch 6 adds multiple bridges to support PHY port selection (Dmitry, Luca).

Changes in v5:
- Link to v4: https://lore.kernel.org/all/20260727064408.101-1-kernel@airkyi.com/
- Add module soft depend for USB Type-C DP HPD bridge.

Changes in v4:
- Link to v3: https://lore.kernel.org/all/20260717072323.96-1-kernel@airkyi.com/
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

Changes in v3:
- Link to v2: https://lore.kernel.org/all/20260608070805.88-1-kernel@airkyi.com/
  (Sorry, I forgot to add the "v2" title, so it looks like v1.)
- Remove now-redundant call to drm_connector_attach_encoder()
- Rebase to v7.2-rc2

Changes in v2:
- Link to v1: https://lore.kernel.org/all/20260521032854.103-1-kernel@airkyi.com/
- Add copyright text.
- Remove useless goto.
- Fix incorrect function names in the documentation comments.
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.

Chaoyi Chen (6):
  drm/bridge: Implement generic USB Type-C DP HPD bridge
  drm/display: Add soft depend for aux-hpd-typec-dp-bridge module
  drm/bridge: aux: Add drm_aux_bridge_register_from_node()
  phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
  drm/rockchip: cdn-dp: Support handle lane info without extcon
  drm/rockchip: cdn-dp: Add multiple bridges to support PHY port
    selection

 drivers/gpu/drm/bridge/Kconfig                |  10 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/aux-bridge.c           |  26 +-
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  |  64 ++++
 .../gpu/drm/display/drm_display_helper_mod.c  |   1 +
 drivers/gpu/drm/rockchip/Kconfig              |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c        | 358 ++++++++++++++----
 drivers/gpu/drm/rockchip/cdn-dp-core.h        |  18 +-
 drivers/phy/rockchip/Kconfig                  |   2 +
 drivers/phy/rockchip/phy-rockchip-typec.c     |  13 +-
 include/drm/bridge/aux-bridge.h               |   6 +
 11 files changed, 429 insertions(+), 71 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 0/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This series is split from the v15 "Add Type-C DP support for RK3399 EVB
IND board" series [1]. It focuses on the DRM bridge and Rockchip
platform CDN-DP controller changes.

[1] https://lore.kernel.org/all/20260304094152.92-1-kernel@airkyi.com/

====
1. Generic Type-C DP HPD bridge

Currently, several USB-C controller drivers register their own DP HPD
bridge via aux-hpd-bridge.c, each duplicating the same logic. For
devicetree based platforms, the USB-C controller may vary across boards,
and not every USB-C controller driver implements this feature. Patch 1
implements a generic DP HPD bridge that monitors Type-C bus events and
automatically creates an HPD bridge when a Type-C port device with DP
SVID is registered.

2. Multiple bridge model for CDN-DP

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. Patch 5
introduces a multi-bridge model where each PHY port gets a separate
encoder and bridge, allowing flexible selection of the output PHY port.
This is based on the DRM AUX HPD bridge rather than extcon.

====
Patch 1 adds generic USB Type-C DP HPD bridge (Dmitry, Heikki).
Patch 2 add module soft depend for USB Type-C DP HPD bridge(Sebastian).
Patch 3 adds new API drm_aux_bridge_register_from_node() (Neil).
Patch 4 adds DRM AUX bridge support for RK3399 USBDP PHY (Neil).
Patch 5 drops CDN-DP's extcon dependency when Type-C is present (Dmitry).
Patch 6 adds multiple bridges to support PHY port selection (Dmitry, Luca).

Changes in v5:
- Link to v4: https://lore.kernel.org/all/20260727064408.101-1-kernel@airkyi.com/
- Add module soft depend for USB Type-C DP HPD bridge.

Changes in v4:
- Link to v3: https://lore.kernel.org/all/20260717072323.96-1-kernel@airkyi.com/
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

Changes in v3:
- Link to v2: https://lore.kernel.org/all/20260608070805.88-1-kernel@airkyi.com/
  (Sorry, I forgot to add the "v2" title, so it looks like v1.)
- Remove now-redundant call to drm_connector_attach_encoder()
- Rebase to v7.2-rc2

Changes in v2:
- Link to v1: https://lore.kernel.org/all/20260521032854.103-1-kernel@airkyi.com/
- Add copyright text.
- Remove useless goto.
- Fix incorrect function names in the documentation comments.
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.

Chaoyi Chen (6):
  drm/bridge: Implement generic USB Type-C DP HPD bridge
  drm/display: Add soft depend for aux-hpd-typec-dp-bridge module
  drm/bridge: aux: Add drm_aux_bridge_register_from_node()
  phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
  drm/rockchip: cdn-dp: Support handle lane info without extcon
  drm/rockchip: cdn-dp: Add multiple bridges to support PHY port
    selection

 drivers/gpu/drm/bridge/Kconfig                |  10 +
 drivers/gpu/drm/bridge/Makefile               |   1 +
 drivers/gpu/drm/bridge/aux-bridge.c           |  26 +-
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  |  64 ++++
 .../gpu/drm/display/drm_display_helper_mod.c  |   1 +
 drivers/gpu/drm/rockchip/Kconfig              |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c        | 358 ++++++++++++++----
 drivers/gpu/drm/rockchip/cdn-dp-core.h        |  18 +-
 drivers/phy/rockchip/Kconfig                  |   2 +
 drivers/phy/rockchip/phy-rockchip-typec.c     |  13 +-
 include/drm/bridge/aux-bridge.h               |   6 +
 11 files changed, 429 insertions(+), 71 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

-- 
2.53.0

[PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The HPD function of Type-C DP is implemented through
drm_connector_oob_hotplug_event(). For embedded DP, it is required
that the DRM connector fwnode corresponds to the Type-C port fwnode.

To describe the relationship between the DP controller and the Type-C
port device, we usually using drm_bridge to build a bridge chain.

Now several USB-C controller drivers have already implemented the DP
HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
HPD bridge on USB-C connector port device.

But this requires the USB-C controller driver to manually register the
HPD bridge. If the driver does not implement this feature, the bridge
will not be create.

So this patch implements a generic DP HPD bridge based on
aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
Type-C port device containing the DP svid is registered, it will
create an HPD bridge for it without the need for the USB-C controller
driver to implement it.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---

(no changes since v5)

Changes in v4:
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

(no changes since v3)

Changes in v2:
- Add copyright text.
- Remove useless goto.
---
 drivers/gpu/drm/bridge/Kconfig                | 10 +++
 drivers/gpu/drm/bridge/Makefile               |  1 +
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 64 +++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 4a57d49b4c6d..9739b2a19758 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
 	  Simple bridge that terminates the bridge chain and provides HPD
 	  support.
 
+if DRM_AUX_HPD_BRIDGE
+config DRM_AUX_HPD_TYPEC_BRIDGE
+	tristate
+	depends on TYPEC || !TYPEC
+	default TYPEC
+	help
+	  Simple bridge that terminates the bridge chain and provides HPD
+	  support. It build bridge on each USB-C connector device node.
+endif
+
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 15cc821d85b7..d88a9e1ccc9a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
 obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
+obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
 obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
 obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
new file mode 100644
index 000000000000..43af3ea20f20
--- /dev/null
+++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>
+ */
+#include <linux/of.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+
+#include <drm/bridge/aux-bridge.h>
+
+static int drm_typec_bus_event(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = (struct device *)data;
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_OK;
+
+	/*
+	 * alt->dev.parent->parent : USB-C controller device
+	 * alt->dev.parent         : USB-C connector device
+	 */
+	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
+		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
+					   to_of_node(alt->dev.parent->fwnode));
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block drm_typec_event_nb = {
+	.notifier_call = drm_typec_bus_event,
+};
+
+static int check_device_already_added(struct device *dev, void *data)
+{
+	drm_typec_bus_event(NULL, BUS_NOTIFY_ADD_DEVICE, dev);
+	return 0;
+}
+
+static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
+{
+	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
+}
+
+static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
+{
+	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
+	/*
+	 * Before module initialization, some devices may have already been added.
+         * Register the HPD bridge for these devices.
+	 */
+	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);
+	return 0;
+}
+
+module_init(drm_aux_hpd_typec_dp_bridge_module_init);
+module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
+
+MODULE_AUTHOR("Chaoyi Chen <chaoyi.chen@rock-chips.com>");
+MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
+MODULE_LICENSE("GPL");
-- 
2.53.0

[PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The HPD function of Type-C DP is implemented through
drm_connector_oob_hotplug_event(). For embedded DP, it is required
that the DRM connector fwnode corresponds to the Type-C port fwnode.

To describe the relationship between the DP controller and the Type-C
port device, we usually using drm_bridge to build a bridge chain.

Now several USB-C controller drivers have already implemented the DP
HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
HPD bridge on USB-C connector port device.

But this requires the USB-C controller driver to manually register the
HPD bridge. If the driver does not implement this feature, the bridge
will not be create.

So this patch implements a generic DP HPD bridge based on
aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
Type-C port device containing the DP svid is registered, it will
create an HPD bridge for it without the need for the USB-C controller
driver to implement it.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---

(no changes since v5)

Changes in v4:
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

(no changes since v3)

Changes in v2:
- Add copyright text.
- Remove useless goto.
---
 drivers/gpu/drm/bridge/Kconfig                | 10 +++
 drivers/gpu/drm/bridge/Makefile               |  1 +
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 64 +++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 4a57d49b4c6d..9739b2a19758 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
 	  Simple bridge that terminates the bridge chain and provides HPD
 	  support.
 
+if DRM_AUX_HPD_BRIDGE
+config DRM_AUX_HPD_TYPEC_BRIDGE
+	tristate
+	depends on TYPEC || !TYPEC
+	default TYPEC
+	help
+	  Simple bridge that terminates the bridge chain and provides HPD
+	  support. It build bridge on each USB-C connector device node.
+endif
+
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 15cc821d85b7..d88a9e1ccc9a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
 obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
+obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
 obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
 obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
new file mode 100644
index 000000000000..43af3ea20f20
--- /dev/null
+++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>
+ */
+#include <linux/of.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+
+#include <drm/bridge/aux-bridge.h>
+
+static int drm_typec_bus_event(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = (struct device *)data;
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_OK;
+
+	/*
+	 * alt->dev.parent->parent : USB-C controller device
+	 * alt->dev.parent         : USB-C connector device
+	 */
+	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
+		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
+					   to_of_node(alt->dev.parent->fwnode));
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block drm_typec_event_nb = {
+	.notifier_call = drm_typec_bus_event,
+};
+
+static int check_device_already_added(struct device *dev, void *data)
+{
+	drm_typec_bus_event(NULL, BUS_NOTIFY_ADD_DEVICE, dev);
+	return 0;
+}
+
+static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
+{
+	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
+}
+
+static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
+{
+	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
+	/*
+	 * Before module initialization, some devices may have already been added.
+         * Register the HPD bridge for these devices.
+	 */
+	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);
+	return 0;
+}
+
+module_init(drm_aux_hpd_typec_dp_bridge_module_init);
+module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
+
+MODULE_AUTHOR("Chaoyi Chen <chaoyi.chen@rock-chips.com>");
+MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
+MODULE_LICENSE("GPL");
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The HPD function of Type-C DP is implemented through
drm_connector_oob_hotplug_event(). For embedded DP, it is required
that the DRM connector fwnode corresponds to the Type-C port fwnode.

To describe the relationship between the DP controller and the Type-C
port device, we usually using drm_bridge to build a bridge chain.

Now several USB-C controller drivers have already implemented the DP
HPD bridge function provided by aux-hpd-bridge.c, it will build a DP
HPD bridge on USB-C connector port device.

But this requires the USB-C controller driver to manually register the
HPD bridge. If the driver does not implement this feature, the bridge
will not be create.

So this patch implements a generic DP HPD bridge based on
aux-hpd-bridge.c. It will monitor Type-C bus events, and when a
Type-C port device containing the DP svid is registered, it will
create an HPD bridge for it without the need for the USB-C controller
driver to implement it.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---

(no changes since v5)

Changes in v4:
- Scan the entire typec_bus and attempt to register the hpd bridge,
  so as not to miss devices that were already added during initialization.

(no changes since v3)

Changes in v2:
- Add copyright text.
- Remove useless goto.
---
 drivers/gpu/drm/bridge/Kconfig                | 10 +++
 drivers/gpu/drm/bridge/Makefile               |  1 +
 .../gpu/drm/bridge/aux-hpd-typec-dp-bridge.c  | 64 +++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 4a57d49b4c6d..9739b2a19758 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -30,6 +30,16 @@ config DRM_AUX_HPD_BRIDGE
 	  Simple bridge that terminates the bridge chain and provides HPD
 	  support.
 
+if DRM_AUX_HPD_BRIDGE
+config DRM_AUX_HPD_TYPEC_BRIDGE
+	tristate
+	depends on TYPEC || !TYPEC
+	default TYPEC
+	help
+	  Simple bridge that terminates the bridge chain and provides HPD
+	  support. It build bridge on each USB-C connector device node.
+endif
+
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 15cc821d85b7..d88a9e1ccc9a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_DRM_AUX_BRIDGE) += aux-bridge.o
 obj-$(CONFIG_DRM_AUX_HPD_BRIDGE) += aux-hpd-bridge.o
+obj-$(CONFIG_DRM_AUX_HPD_TYPEC_BRIDGE) += aux-hpd-typec-dp-bridge.o
 obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
 obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
 obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
new file mode 100644
index 000000000000..43af3ea20f20
--- /dev/null
+++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2026 Rockchip Electronics Co., Ltd.
+ *
+ * Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>
+ */
+#include <linux/of.h>
+#include <linux/usb/typec_altmode.h>
+#include <linux/usb/typec_dp.h>
+
+#include <drm/bridge/aux-bridge.h>
+
+static int drm_typec_bus_event(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = (struct device *)data;
+	struct typec_altmode *alt = to_typec_altmode(dev);
+
+	if (action != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_OK;
+
+	/*
+	 * alt->dev.parent->parent : USB-C controller device
+	 * alt->dev.parent         : USB-C connector device
+	 */
+	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
+		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
+					   to_of_node(alt->dev.parent->fwnode));
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block drm_typec_event_nb = {
+	.notifier_call = drm_typec_bus_event,
+};
+
+static int check_device_already_added(struct device *dev, void *data)
+{
+	drm_typec_bus_event(NULL, BUS_NOTIFY_ADD_DEVICE, dev);
+	return 0;
+}
+
+static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
+{
+	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
+}
+
+static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
+{
+	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
+	/*
+	 * Before module initialization, some devices may have already been added.
+         * Register the HPD bridge for these devices.
+	 */
+	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);
+	return 0;
+}
+
+module_init(drm_aux_hpd_typec_dp_bridge_module_init);
+module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);
+
+MODULE_AUTHOR("Chaoyi Chen <chaoyi.chen@rock-chips.com>");
+MODULE_DESCRIPTION("DRM TYPEC DP HPD BRIDGE");
+MODULE_LICENSE("GPL");
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 2/6] drm/display: Add soft depend for aux-hpd-typec-dp-bridge module

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The aux-hpd-typec-dp-bridge module serves as a generic TypeC
DisplayPort HPD bridge and is not required by any other
module. Therefore, it will not be auto-loaded.

Given that the drm_display_helper module houses DisplayPort-related
helper code, add a MODULE_SOFTDEP() within it to suggest loading the
aux-hpd-typec-dp-bridge module beforehand.

Suggeted-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
 drivers/gpu/drm/display/drm_display_helper_mod.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/display/drm_display_helper_mod.c b/drivers/gpu/drm/display/drm_display_helper_mod.c
index d8a6e6228773..f0152d6b0b2d 100644
--- a/drivers/gpu/drm/display/drm_display_helper_mod.c
+++ b/drivers/gpu/drm/display/drm_display_helper_mod.c
@@ -18,5 +18,6 @@ static void __exit drm_display_helper_module_exit(void)
 	drm_dp_aux_dev_exit();
 }
 
+MODULE_SOFTDEP("pre: aux-hpd-typec-dp-bridge");
 module_init(drm_display_helper_module_init);
 module_exit(drm_display_helper_module_exit);
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 2/6] drm/display: Add soft depend for aux-hpd-typec-dp-bridge module

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The aux-hpd-typec-dp-bridge module serves as a generic TypeC
DisplayPort HPD bridge and is not required by any other
module. Therefore, it will not be auto-loaded.

Given that the drm_display_helper module houses DisplayPort-related
helper code, add a MODULE_SOFTDEP() within it to suggest loading the
aux-hpd-typec-dp-bridge module beforehand.

Suggeted-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
 drivers/gpu/drm/display/drm_display_helper_mod.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/display/drm_display_helper_mod.c b/drivers/gpu/drm/display/drm_display_helper_mod.c
index d8a6e6228773..f0152d6b0b2d 100644
--- a/drivers/gpu/drm/display/drm_display_helper_mod.c
+++ b/drivers/gpu/drm/display/drm_display_helper_mod.c
@@ -18,5 +18,6 @@ static void __exit drm_display_helper_module_exit(void)
 	drm_dp_aux_dev_exit();
 }
 
+MODULE_SOFTDEP("pre: aux-hpd-typec-dp-bridge");
 module_init(drm_display_helper_module_init);
 module_exit(drm_display_helper_module_exit);
-- 
2.53.0

[PATCH v5 2/6] drm/display: Add soft depend for aux-hpd-typec-dp-bridge module

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The aux-hpd-typec-dp-bridge module serves as a generic TypeC
DisplayPort HPD bridge and is not required by any other
module. Therefore, it will not be auto-loaded.

Given that the drm_display_helper module houses DisplayPort-related
helper code, add a MODULE_SOFTDEP() within it to suggest loading the
aux-hpd-typec-dp-bridge module beforehand.

Suggeted-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
---
 drivers/gpu/drm/display/drm_display_helper_mod.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/display/drm_display_helper_mod.c b/drivers/gpu/drm/display/drm_display_helper_mod.c
index d8a6e6228773..f0152d6b0b2d 100644
--- a/drivers/gpu/drm/display/drm_display_helper_mod.c
+++ b/drivers/gpu/drm/display/drm_display_helper_mod.c
@@ -18,5 +18,6 @@ static void __exit drm_display_helper_module_exit(void)
 	drm_dp_aux_dev_exit();
 }
 
+MODULE_SOFTDEP("pre: aux-hpd-typec-dp-bridge");
 module_init(drm_display_helper_module_init);
 module_exit(drm_display_helper_module_exit);
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node()

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The drm_aux_bridge_register() uses the device->of_node as the
bridge->of_node.

This patch adds drm_aux_bridge_register_from_node() to allow
specifying the of_node corresponding to the bridge.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v3)

Changes in v2:
- Fix incorrect function names in the documentation comments.
---
 drivers/gpu/drm/bridge/aux-bridge.c | 26 +++++++++++++++++++++++---
 include/drm/bridge/aux-bridge.h     |  6 ++++++
 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
index 1ed21a8713bf..06a1466f49bd 100644
--- a/drivers/gpu/drm/bridge/aux-bridge.c
+++ b/drivers/gpu/drm/bridge/aux-bridge.c
@@ -33,8 +33,9 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
 }
 
 /**
- * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * drm_aux_bridge_register_from_node - Create a simple bridge device to link the chain
  * @parent: device instance providing this bridge
+ * @np: device node pointer corresponding to this bridge instance
  *
  * Creates a simple DRM bridge that doesn't implement any drm_bridge
  * operations. Such bridges merely fill a place in the bridge chain linking
@@ -42,7 +43,7 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
  *
  * Return: zero on success, negative error code on failure
  */
-int drm_aux_bridge_register(struct device *parent)
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
 {
 	struct auxiliary_device *adev;
 	int ret;
@@ -62,7 +63,10 @@ int drm_aux_bridge_register(struct device *parent)
 	adev->dev.parent = parent;
 	adev->dev.release = drm_aux_bridge_release;
 
-	device_set_of_node_from_dev(&adev->dev, parent);
+	if (np)
+		device_set_node(&adev->dev, of_fwnode_handle(np));
+	else
+		device_set_of_node_from_dev(&adev->dev, parent);
 
 	ret = auxiliary_device_init(adev);
 	if (ret) {
@@ -80,6 +84,22 @@ int drm_aux_bridge_register(struct device *parent)
 
 	return devm_add_action_or_reset(parent, drm_aux_bridge_unregister_adev, adev);
 }
+EXPORT_SYMBOL_GPL(drm_aux_bridge_register_from_node);
+
+/**
+ * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * @parent: device instance providing this bridge
+ *
+ * Creates a simple DRM bridge that doesn't implement any drm_bridge
+ * operations. Such bridges merely fill a place in the bridge chain linking
+ * surrounding DRM bridges.
+ *
+ * Return: zero on success, negative error code on failure
+ */
+int drm_aux_bridge_register(struct device *parent)
+{
+	return drm_aux_bridge_register_from_node(parent, NULL);
+}
 EXPORT_SYMBOL_GPL(drm_aux_bridge_register);
 
 struct drm_aux_bridge_data {
diff --git a/include/drm/bridge/aux-bridge.h b/include/drm/bridge/aux-bridge.h
index c2f5a855512f..7dd1f17a1354 100644
--- a/include/drm/bridge/aux-bridge.h
+++ b/include/drm/bridge/aux-bridge.h
@@ -13,11 +13,17 @@ struct auxiliary_device;
 
 #if IS_ENABLED(CONFIG_DRM_AUX_BRIDGE)
 int drm_aux_bridge_register(struct device *parent);
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np);
 #else
 static inline int drm_aux_bridge_register(struct device *parent)
 {
 	return 0;
 }
+
+static inline int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
+{
+	return 0;
+}
 #endif
 
 #if IS_ENABLED(CONFIG_DRM_AUX_HPD_BRIDGE)
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node()

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The drm_aux_bridge_register() uses the device->of_node as the
bridge->of_node.

This patch adds drm_aux_bridge_register_from_node() to allow
specifying the of_node corresponding to the bridge.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v3)

Changes in v2:
- Fix incorrect function names in the documentation comments.
---
 drivers/gpu/drm/bridge/aux-bridge.c | 26 +++++++++++++++++++++++---
 include/drm/bridge/aux-bridge.h     |  6 ++++++
 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
index 1ed21a8713bf..06a1466f49bd 100644
--- a/drivers/gpu/drm/bridge/aux-bridge.c
+++ b/drivers/gpu/drm/bridge/aux-bridge.c
@@ -33,8 +33,9 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
 }
 
 /**
- * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * drm_aux_bridge_register_from_node - Create a simple bridge device to link the chain
  * @parent: device instance providing this bridge
+ * @np: device node pointer corresponding to this bridge instance
  *
  * Creates a simple DRM bridge that doesn't implement any drm_bridge
  * operations. Such bridges merely fill a place in the bridge chain linking
@@ -42,7 +43,7 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
  *
  * Return: zero on success, negative error code on failure
  */
-int drm_aux_bridge_register(struct device *parent)
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
 {
 	struct auxiliary_device *adev;
 	int ret;
@@ -62,7 +63,10 @@ int drm_aux_bridge_register(struct device *parent)
 	adev->dev.parent = parent;
 	adev->dev.release = drm_aux_bridge_release;
 
-	device_set_of_node_from_dev(&adev->dev, parent);
+	if (np)
+		device_set_node(&adev->dev, of_fwnode_handle(np));
+	else
+		device_set_of_node_from_dev(&adev->dev, parent);
 
 	ret = auxiliary_device_init(adev);
 	if (ret) {
@@ -80,6 +84,22 @@ int drm_aux_bridge_register(struct device *parent)
 
 	return devm_add_action_or_reset(parent, drm_aux_bridge_unregister_adev, adev);
 }
+EXPORT_SYMBOL_GPL(drm_aux_bridge_register_from_node);
+
+/**
+ * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * @parent: device instance providing this bridge
+ *
+ * Creates a simple DRM bridge that doesn't implement any drm_bridge
+ * operations. Such bridges merely fill a place in the bridge chain linking
+ * surrounding DRM bridges.
+ *
+ * Return: zero on success, negative error code on failure
+ */
+int drm_aux_bridge_register(struct device *parent)
+{
+	return drm_aux_bridge_register_from_node(parent, NULL);
+}
 EXPORT_SYMBOL_GPL(drm_aux_bridge_register);
 
 struct drm_aux_bridge_data {
diff --git a/include/drm/bridge/aux-bridge.h b/include/drm/bridge/aux-bridge.h
index c2f5a855512f..7dd1f17a1354 100644
--- a/include/drm/bridge/aux-bridge.h
+++ b/include/drm/bridge/aux-bridge.h
@@ -13,11 +13,17 @@ struct auxiliary_device;
 
 #if IS_ENABLED(CONFIG_DRM_AUX_BRIDGE)
 int drm_aux_bridge_register(struct device *parent);
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np);
 #else
 static inline int drm_aux_bridge_register(struct device *parent)
 {
 	return 0;
 }
+
+static inline int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
+{
+	return 0;
+}
 #endif
 
 #if IS_ENABLED(CONFIG_DRM_AUX_HPD_BRIDGE)
-- 
2.53.0

[PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node()

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The drm_aux_bridge_register() uses the device->of_node as the
bridge->of_node.

This patch adds drm_aux_bridge_register_from_node() to allow
specifying the of_node corresponding to the bridge.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v3)

Changes in v2:
- Fix incorrect function names in the documentation comments.
---
 drivers/gpu/drm/bridge/aux-bridge.c | 26 +++++++++++++++++++++++---
 include/drm/bridge/aux-bridge.h     |  6 ++++++
 2 files changed, 29 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
index 1ed21a8713bf..06a1466f49bd 100644
--- a/drivers/gpu/drm/bridge/aux-bridge.c
+++ b/drivers/gpu/drm/bridge/aux-bridge.c
@@ -33,8 +33,9 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
 }
 
 /**
- * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * drm_aux_bridge_register_from_node - Create a simple bridge device to link the chain
  * @parent: device instance providing this bridge
+ * @np: device node pointer corresponding to this bridge instance
  *
  * Creates a simple DRM bridge that doesn't implement any drm_bridge
  * operations. Such bridges merely fill a place in the bridge chain linking
@@ -42,7 +43,7 @@ static void drm_aux_bridge_unregister_adev(void *_adev)
  *
  * Return: zero on success, negative error code on failure
  */
-int drm_aux_bridge_register(struct device *parent)
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
 {
 	struct auxiliary_device *adev;
 	int ret;
@@ -62,7 +63,10 @@ int drm_aux_bridge_register(struct device *parent)
 	adev->dev.parent = parent;
 	adev->dev.release = drm_aux_bridge_release;
 
-	device_set_of_node_from_dev(&adev->dev, parent);
+	if (np)
+		device_set_node(&adev->dev, of_fwnode_handle(np));
+	else
+		device_set_of_node_from_dev(&adev->dev, parent);
 
 	ret = auxiliary_device_init(adev);
 	if (ret) {
@@ -80,6 +84,22 @@ int drm_aux_bridge_register(struct device *parent)
 
 	return devm_add_action_or_reset(parent, drm_aux_bridge_unregister_adev, adev);
 }
+EXPORT_SYMBOL_GPL(drm_aux_bridge_register_from_node);
+
+/**
+ * drm_aux_bridge_register - Create a simple bridge device to link the chain
+ * @parent: device instance providing this bridge
+ *
+ * Creates a simple DRM bridge that doesn't implement any drm_bridge
+ * operations. Such bridges merely fill a place in the bridge chain linking
+ * surrounding DRM bridges.
+ *
+ * Return: zero on success, negative error code on failure
+ */
+int drm_aux_bridge_register(struct device *parent)
+{
+	return drm_aux_bridge_register_from_node(parent, NULL);
+}
 EXPORT_SYMBOL_GPL(drm_aux_bridge_register);
 
 struct drm_aux_bridge_data {
diff --git a/include/drm/bridge/aux-bridge.h b/include/drm/bridge/aux-bridge.h
index c2f5a855512f..7dd1f17a1354 100644
--- a/include/drm/bridge/aux-bridge.h
+++ b/include/drm/bridge/aux-bridge.h
@@ -13,11 +13,17 @@ struct auxiliary_device;
 
 #if IS_ENABLED(CONFIG_DRM_AUX_BRIDGE)
 int drm_aux_bridge_register(struct device *parent);
+int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np);
 #else
 static inline int drm_aux_bridge_register(struct device *parent)
 {
 	return 0;
 }
+
+static inline int drm_aux_bridge_register_from_node(struct device *parent, struct device_node *np)
+{
+	return 0;
+}
 #endif
 
 #if IS_ENABLED(CONFIG_DRM_AUX_HPD_BRIDGE)
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge
device.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v1)

---
 drivers/phy/rockchip/Kconfig              |  2 ++
 drivers/phy/rockchip/phy-rockchip-typec.c | 13 +++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 14698571b607..9173d3b4fef4 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -119,6 +119,8 @@ config PHY_ROCKCHIP_SNPS_PCIE3
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	depends on DRM || DRM=n
+	select DRM_AUX_BRIDGE if DRM_BRIDGE
 	select EXTCON
 	select GENERIC_PHY
 	select RESET_CONTROLLER
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..48070b50416e 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -54,6 +54,7 @@
 
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
+#include <drm/bridge/aux-bridge.h>
 
 #define CMN_SSM_BANDGAP			(0x21 << 2)
 #define CMN_SSM_BIAS			(0x22 << 2)
@@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 
 	for_each_available_child_of_node(np, child_np) {
 		struct phy *phy;
+		ret = 0;
 
-		if (of_node_name_eq(child_np, "dp-port"))
+		if (of_node_name_eq(child_np, "dp-port")) {
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_dp_phy_ops);
-		else if (of_node_name_eq(child_np, "usb3-port"))
+			ret = drm_aux_bridge_register_from_node(dev, child_np);
+		} else if (of_node_name_eq(child_np, "usb3-port"))
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_usb3_phy_ops);
 		else
 			continue;
 
+		if (ret) {
+			pm_runtime_disable(dev);
+			of_node_put(child_np);
+			return ret;
+		}
+
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy: %pOFn\n",
 				child_np);
-- 
2.53.0

[PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge
device.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v1)

---
 drivers/phy/rockchip/Kconfig              |  2 ++
 drivers/phy/rockchip/phy-rockchip-typec.c | 13 +++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 14698571b607..9173d3b4fef4 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -119,6 +119,8 @@ config PHY_ROCKCHIP_SNPS_PCIE3
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	depends on DRM || DRM=n
+	select DRM_AUX_BRIDGE if DRM_BRIDGE
 	select EXTCON
 	select GENERIC_PHY
 	select RESET_CONTROLLER
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..48070b50416e 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -54,6 +54,7 @@
 
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
+#include <drm/bridge/aux-bridge.h>
 
 #define CMN_SSM_BANDGAP			(0x21 << 2)
 #define CMN_SSM_BIAS			(0x22 << 2)
@@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 
 	for_each_available_child_of_node(np, child_np) {
 		struct phy *phy;
+		ret = 0;
 
-		if (of_node_name_eq(child_np, "dp-port"))
+		if (of_node_name_eq(child_np, "dp-port")) {
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_dp_phy_ops);
-		else if (of_node_name_eq(child_np, "usb3-port"))
+			ret = drm_aux_bridge_register_from_node(dev, child_np);
+		} else if (of_node_name_eq(child_np, "usb3-port"))
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_usb3_phy_ops);
 		else
 			continue;
 
+		if (ret) {
+			pm_runtime_disable(dev);
+			of_node_put(child_np);
+			return ret;
+		}
+
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy: %pOFn\n",
 				child_np);
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge
device.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---

(no changes since v1)

---
 drivers/phy/rockchip/Kconfig              |  2 ++
 drivers/phy/rockchip/phy-rockchip-typec.c | 13 +++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 14698571b607..9173d3b4fef4 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -119,6 +119,8 @@ config PHY_ROCKCHIP_SNPS_PCIE3
 config PHY_ROCKCHIP_TYPEC
 	tristate "Rockchip TYPEC PHY Driver"
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	depends on DRM || DRM=n
+	select DRM_AUX_BRIDGE if DRM_BRIDGE
 	select EXTCON
 	select GENERIC_PHY
 	select RESET_CONTROLLER
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index d9701b6106d5..48070b50416e 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -54,6 +54,7 @@
 
 #include <linux/mfd/syscon.h>
 #include <linux/phy/phy.h>
+#include <drm/bridge/aux-bridge.h>
 
 #define CMN_SSM_BANDGAP			(0x21 << 2)
 #define CMN_SSM_BIAS			(0x22 << 2)
@@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 
 	for_each_available_child_of_node(np, child_np) {
 		struct phy *phy;
+		ret = 0;
 
-		if (of_node_name_eq(child_np, "dp-port"))
+		if (of_node_name_eq(child_np, "dp-port")) {
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_dp_phy_ops);
-		else if (of_node_name_eq(child_np, "usb3-port"))
+			ret = drm_aux_bridge_register_from_node(dev, child_np);
+		} else if (of_node_name_eq(child_np, "usb3-port"))
 			phy = devm_phy_create(dev, child_np,
 					      &rockchip_usb3_phy_ops);
 		else
 			continue;
 
+		if (ret) {
+			pm_runtime_disable(dev);
+			of_node_put(child_np);
+			return ret;
+		}
+
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create phy: %pOFn\n",
 				child_np);
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This patch add support for get PHY lane info without help of extcon.

There is no extcon needed if the Type-C controller is present. In this
case, the lane info can be get from PHY instead of extcon.

The extcon device should still be supported if Type-C controller is
not present.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v1)

---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 190cce9530c8..74e1f5422a6e 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -157,6 +157,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
 	int dptx;
 	u8 lanes;
 
+	if (!edev)
+		return phy_get_bus_width(port->phy);
+
 	dptx = extcon_get_state(edev, EXTCON_DISP_DP);
 	if (dptx > 0) {
 		extcon_get_property(edev, EXTCON_DISP_DP,
@@ -220,7 +223,7 @@ static bool cdn_dp_check_sink_connection(struct cdn_dp_device *dp)
 	 * some docks need more time to power up.
 	 */
 	while (time_before(jiffies, timeout)) {
-		if (!extcon_get_state(port->extcon, EXTCON_DISP_DP))
+		if (port->extcon && !extcon_get_state(port->extcon, EXTCON_DISP_DP))
 			return false;
 
 		if (!cdn_dp_get_sink_count(dp, &sink_count))
@@ -386,11 +389,14 @@ static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
 		goto err_power_on;
 	}
 
-	ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
-				  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
-	if (ret) {
-		DRM_DEV_ERROR(dp->dev, "get property failed\n");
-		goto err_power_on;
+	property.intval = 0;
+	if (port->extcon) {
+		ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
+					  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
+		if (ret) {
+			DRM_DEV_ERROR(dp->dev, "get property failed\n");
+			goto err_power_on;
+		}
 	}
 
 	port->lanes = cdn_dp_get_port_lanes(port);
@@ -1027,6 +1033,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
+		if (!port->extcon)
+			continue;
+
 		port->event_nb.notifier_call = cdn_dp_pd_event;
 		ret = devm_extcon_register_notifier(dp->dev, port->extcon,
 						    EXTCON_DISP_DP,
@@ -1119,14 +1128,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
 		    PTR_ERR(phy) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 
-		if (IS_ERR(extcon) || IS_ERR(phy))
+		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
 			continue;
 
 		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 		if (!port)
 			return -ENOMEM;
 
-		port->extcon = extcon;
+		port->extcon = IS_ERR(extcon) ? NULL : extcon;
 		port->phy = phy;
 		port->dp = dp;
 		port->id = i;
-- 
2.53.0

[PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This patch add support for get PHY lane info without help of extcon.

There is no extcon needed if the Type-C controller is present. In this
case, the lane info can be get from PHY instead of extcon.

The extcon device should still be supported if Type-C controller is
not present.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v1)

---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 190cce9530c8..74e1f5422a6e 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -157,6 +157,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
 	int dptx;
 	u8 lanes;
 
+	if (!edev)
+		return phy_get_bus_width(port->phy);
+
 	dptx = extcon_get_state(edev, EXTCON_DISP_DP);
 	if (dptx > 0) {
 		extcon_get_property(edev, EXTCON_DISP_DP,
@@ -220,7 +223,7 @@ static bool cdn_dp_check_sink_connection(struct cdn_dp_device *dp)
 	 * some docks need more time to power up.
 	 */
 	while (time_before(jiffies, timeout)) {
-		if (!extcon_get_state(port->extcon, EXTCON_DISP_DP))
+		if (port->extcon && !extcon_get_state(port->extcon, EXTCON_DISP_DP))
 			return false;
 
 		if (!cdn_dp_get_sink_count(dp, &sink_count))
@@ -386,11 +389,14 @@ static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
 		goto err_power_on;
 	}
 
-	ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
-				  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
-	if (ret) {
-		DRM_DEV_ERROR(dp->dev, "get property failed\n");
-		goto err_power_on;
+	property.intval = 0;
+	if (port->extcon) {
+		ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
+					  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
+		if (ret) {
+			DRM_DEV_ERROR(dp->dev, "get property failed\n");
+			goto err_power_on;
+		}
 	}
 
 	port->lanes = cdn_dp_get_port_lanes(port);
@@ -1027,6 +1033,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
+		if (!port->extcon)
+			continue;
+
 		port->event_nb.notifier_call = cdn_dp_pd_event;
 		ret = devm_extcon_register_notifier(dp->dev, port->extcon,
 						    EXTCON_DISP_DP,
@@ -1119,14 +1128,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
 		    PTR_ERR(phy) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 
-		if (IS_ERR(extcon) || IS_ERR(phy))
+		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
 			continue;
 
 		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 		if (!port)
 			return -ENOMEM;
 
-		port->extcon = extcon;
+		port->extcon = IS_ERR(extcon) ? NULL : extcon;
 		port->phy = phy;
 		port->dp = dp;
 		port->id = i;
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

This patch add support for get PHY lane info without help of extcon.

There is no extcon needed if the Type-C controller is present. In this
case, the lane info can be get from PHY instead of extcon.

The extcon device should still be supported if Type-C controller is
not present.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v1)

---
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 190cce9530c8..74e1f5422a6e 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -157,6 +157,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
 	int dptx;
 	u8 lanes;
 
+	if (!edev)
+		return phy_get_bus_width(port->phy);
+
 	dptx = extcon_get_state(edev, EXTCON_DISP_DP);
 	if (dptx > 0) {
 		extcon_get_property(edev, EXTCON_DISP_DP,
@@ -220,7 +223,7 @@ static bool cdn_dp_check_sink_connection(struct cdn_dp_device *dp)
 	 * some docks need more time to power up.
 	 */
 	while (time_before(jiffies, timeout)) {
-		if (!extcon_get_state(port->extcon, EXTCON_DISP_DP))
+		if (port->extcon && !extcon_get_state(port->extcon, EXTCON_DISP_DP))
 			return false;
 
 		if (!cdn_dp_get_sink_count(dp, &sink_count))
@@ -386,11 +389,14 @@ static int cdn_dp_enable_phy(struct cdn_dp_device *dp, struct cdn_dp_port *port)
 		goto err_power_on;
 	}
 
-	ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
-				  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
-	if (ret) {
-		DRM_DEV_ERROR(dp->dev, "get property failed\n");
-		goto err_power_on;
+	property.intval = 0;
+	if (port->extcon) {
+		ret = extcon_get_property(port->extcon, EXTCON_DISP_DP,
+					  EXTCON_PROP_USB_TYPEC_POLARITY, &property);
+		if (ret) {
+			DRM_DEV_ERROR(dp->dev, "get property failed\n");
+			goto err_power_on;
+		}
 	}
 
 	port->lanes = cdn_dp_get_port_lanes(port);
@@ -1027,6 +1033,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
+		if (!port->extcon)
+			continue;
+
 		port->event_nb.notifier_call = cdn_dp_pd_event;
 		ret = devm_extcon_register_notifier(dp->dev, port->extcon,
 						    EXTCON_DISP_DP,
@@ -1119,14 +1128,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
 		    PTR_ERR(phy) == -EPROBE_DEFER)
 			return -EPROBE_DEFER;
 
-		if (IS_ERR(extcon) || IS_ERR(phy))
+		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
 			continue;
 
 		port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
 		if (!port)
 			return -ENOMEM;
 
-		port->extcon = extcon;
+		port->extcon = IS_ERR(extcon) ? NULL : extcon;
 		port->phy = phy;
 		port->dp = dp;
 		port->id = i;
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

[PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. And
the CDN-DP can be switched to output to one of the PHYs. If both ports
are plugged into DP, DP will select the first port for output.

This patch adds support for multiple bridges, enabling users to flexibly
select the output port. For each PHY port, a separate encoder and bridge
are registered.

The change is based on the DRM AUX HPD bridge, rather than the
extcon approach. This requires the DT to correctly describe the
connections between the first bridge in bridge chain and DP
controller. For example, the bridge chain may be like this:

PHY aux birdge -> fsa4480 analog audio switch bridge ->
onnn,nb7vpq904m USB reminder bridge -> USB-C controller AUX HPD bridge

In this case, the connection relationships among the PHY aux bridge
and the DP contorller need to be described in DT.

In addition, the cdn_dp_parse_next_bridge_dt() will parses it and
determines whether to register one or two bridges.

Since there is only one DP controller, only one of the PHY ports can
output at a time. The key is how to switch between different PHYs,
which is handled by cdn_dp_switch_port() and cdn_dp_enable().

There are two cases:

1. Neither bridge is enabled. In this case, both bridges can
independently read the EDID, and the PHY port may switch before
reading the EDID.

2. One bridge is already enabled. In this case, other bridges are not
allowed to read the EDID. So we will try to return the cached EDID.

Since the scenario of two ports plug in at the same time is rare,
I don't have a board which support two TypeC connector to test this.
Therefore, I tested forced switching on a single PHY port, as well as
output using a fake PHY port alongside a real PHY port.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v4)

Changes in v3:
- Remove now-redundant call to drm_connector_attach_encoder()

Changes in v2:
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.
---
 drivers/gpu/drm/rockchip/Kconfig       |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 333 ++++++++++++++++++++-----
 drivers/gpu/drm/rockchip/cdn-dp-core.h |  18 +-
 3 files changed, 294 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index e7f49fe845ea..ce70f91c13e6 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -60,6 +60,7 @@ config ROCKCHIP_CDN_DP
 	select DRM_DISPLAY_HELPER
 	select DRM_BRIDGE_CONNECTOR
 	select DRM_DISPLAY_DP_HELPER
+	select DRM_AUX_HPD_BRIDGE
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the cdn DP driver. If you want to enable Dp on
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 74e1f5422a6e..5e513f6930cb 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -28,16 +28,17 @@
 #include "cdn-dp-core.h"
 #include "cdn-dp-reg.h"
 
-static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port);
+
+static inline struct cdn_dp_bridge *bridge_to_dp_bridge(struct drm_bridge *bridge)
 {
-	return container_of(bridge, struct cdn_dp_device, bridge);
+	return container_of(bridge, struct cdn_dp_bridge, bridge);
 }
 
-static inline struct cdn_dp_device *encoder_to_dp(struct drm_encoder *encoder)
+static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
 {
-	struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
-
-	return container_of(rkencoder, struct cdn_dp_device, encoder);
+	return bridge_to_dp_bridge(bridge)->parent;
 }
 
 #define GRF_SOC_CON9		0x6224
@@ -192,14 +193,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
 static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
 {
 	struct cdn_dp_port *port;
-	int i, lanes;
+	int i, lanes[MAX_PHY];
 
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
-		lanes = cdn_dp_get_port_lanes(port);
-		if (lanes)
+		lanes[i] = cdn_dp_get_port_lanes(port);
+		if (!dp->next_bridge_valid)
 			return port;
 	}
+
+	if (dp->next_bridge_valid) {
+		/* If more than one port is available, pick the last active port */
+		if (dp->active_port >= 0 && lanes[dp->active_port])
+			return dp->port[dp->active_port];
+
+		/* If the last active port is not available, pick an available port in order */
+		for (i = 0; i < dp->bridge_count; i++) {
+			if (lanes[i])
+				return dp->port[i];
+		}
+	}
+
 	return NULL;
 }
 
@@ -254,12 +268,45 @@ static const struct drm_edid *
 cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
-	const struct drm_edid *drm_edid;
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_port *port = dp->port[dp_bridge->id];
+	struct cdn_dp_port *prev_port = NULL;
+	const struct drm_edid *drm_edid = NULL;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
+
+	/* More than one port is available */
+	if (dp->bridge_count > 1 && !port->phy_enabled) {
+		for (i = 0; i < dp->bridge_count; i++) {
+			/* Another port already enable */
+			if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
+				goto get_cache;
+			/* Find already enabled port */
+			if (dp->port[i]->phy_enabled)
+				prev_port = dp->port[i];
+		}
+
+		/* Switch to current port */
+		if (prev_port) {
+			ret = cdn_dp_switch_port(dp, prev_port, port);
+			if (ret)
+				goto get_cache;
+		}
+	}
+
 	drm_edid = drm_edid_read_custom(connector, cdn_dp_get_edid_block, dp);
+	/* replace edid cache */
+	if (dp->edid_cache[dp_bridge->id])
+		drm_edid_free(dp->edid_cache[dp_bridge->id]);
+	dp->edid_cache[dp_bridge->id] = drm_edid_dup(drm_edid);
+
 	mutex_unlock(&dp->lock);
+	return drm_edid;
 
+get_cache:
+	drm_edid = drm_edid_dup(dp->edid_cache[dp_bridge->id]);
+	mutex_unlock(&dp->lock);
 	return drm_edid;
 }
 
@@ -268,12 +315,13 @@ cdn_dp_bridge_mode_valid(struct drm_bridge *bridge,
 			 const struct drm_display_info *display_info,
 			 const struct drm_display_mode *mode)
 {
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
 	u32 requested, actual, rate, sink_max, source_max = 0;
 	u8 lanes, bpc;
 
 	/* If DP is disconnected, every mode is invalid */
-	if (!dp->connected)
+	if (!dp_bridge->connected || !dp->connected)
 		return MODE_BAD;
 
 	switch (display_info->bpc) {
@@ -551,6 +599,50 @@ static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
 	return drm_dp_channel_eq_ok(link_status, min(port->lanes, sink_lanes));
 }
 
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port)
+{
+	int ret;
+
+	ret = cdn_dp_disable_phy(dp, prev_port);
+	if (ret)
+		goto out;
+	ret = cdn_dp_enable_phy(dp, port);
+	if (ret)
+		goto out;
+
+	ret = cdn_dp_get_sink_capability(dp);
+	if (ret) {
+		cdn_dp_disable_phy(dp, port);
+		goto out;
+	}
+
+	dp->lanes = port->lanes;
+
+	if (!cdn_dp_check_link_status(dp)) {
+		dev_info(dp->dev, "Connected with sink; re-train link\n");
+
+		ret = cdn_dp_train_link(dp);
+		if (ret) {
+			dev_err(dp->dev, "Training link failed: %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
+		if (ret) {
+			dev_err(dp->dev, "Failed to idle video %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_config_video(dp);
+		if (ret)
+			dev_err(dp->dev, "Failed to configure video: %d\n", ret);
+	}
+
+out:
+	return ret;
+}
+
 static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 				       struct drm_display_info *display_info)
 {
@@ -572,6 +664,7 @@ static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct drm_connector *connector;
 	int ret, val;
 
@@ -581,7 +674,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	cdn_dp_display_info_update(dp, &connector->display_info);
 
-	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp->encoder.encoder);
+	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp_bridge->encoder.encoder);
 	if (ret < 0) {
 		DRM_DEV_ERROR(dp->dev, "Could not get vop id, %d", ret);
 		return;
@@ -600,6 +693,9 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	mutex_lock(&dp->lock);
 
+	if (dp->next_bridge_valid)
+		dp->active_port = dp_bridge->id;
+
 	ret = cdn_dp_enable(dp);
 	if (ret) {
 		DRM_DEV_ERROR(dp->dev, "Failed to enable bridge %d\n",
@@ -632,6 +728,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 		goto out;
 	}
 
+	dp_bridge->enabled = true;
 out:
 	mutex_unlock(&dp->lock);
 }
@@ -639,9 +736,11 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 static void cdn_dp_bridge_atomic_disable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	int ret;
 
 	mutex_lock(&dp->lock);
+	dp_bridge->enabled = false;
 
 	if (dp->active) {
 		ret = cdn_dp_disable(dp);
@@ -828,6 +927,17 @@ static int cdn_dp_audio_mute_stream(struct drm_bridge *bridge,
 	return ret;
 }
 
+static void cdn_dp_bridge_hpd_notify(struct drm_bridge *bridge,
+				     struct drm_connector *connector,
+				     enum drm_connector_status status)
+{
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+
+	dp->bridge_list[dp_bridge->id]->connected = status == connector_status_connected;
+	schedule_work(&dp->event_work);
+}
+
 static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
@@ -838,6 +948,7 @@ static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_disable = cdn_dp_bridge_atomic_disable,
 	.mode_valid = cdn_dp_bridge_mode_valid,
 	.mode_set = cdn_dp_bridge_mode_set,
+	.hpd_notify = cdn_dp_bridge_hpd_notify,
 
 	.dp_audio_prepare = cdn_dp_audio_prepare,
 	.dp_audio_mute_stream = cdn_dp_audio_mute_stream,
@@ -886,7 +997,8 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 {
 	struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
 						event_work);
-	int ret;
+	bool connected;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
 
@@ -945,9 +1057,12 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 
 out:
 	mutex_unlock(&dp->lock);
-	drm_bridge_hpd_notify(&dp->bridge,
-			      dp->connected ? connector_status_connected
-					    : connector_status_disconnected);
+	for (i = 0; i < dp->bridge_count; i++) {
+		connected = dp->connected && dp->bridge_list[i]->connected;
+		drm_bridge_hpd_notify(&dp->bridge_list[i]->bridge,
+				      connected ? connector_status_connected
+						: connector_status_disconnected);
+	}
 }
 
 static int cdn_dp_pd_event(struct notifier_block *nb,
@@ -967,28 +1082,16 @@ static int cdn_dp_pd_event(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+static int cdn_bridge_add(struct device *dev,
+			  struct drm_bridge *bridge,
+			  struct drm_bridge *next_bridge,
+			  struct drm_encoder *encoder)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder;
+	struct drm_device *drm_dev = dp->drm_dev;
+	struct drm_bridge *last_bridge __free(drm_bridge_put) = NULL;
 	struct drm_connector *connector;
-	struct cdn_dp_port *port;
-	struct drm_device *drm_dev = data;
-	int ret, i;
-
-	ret = cdn_dp_parse_dt(dp);
-	if (ret < 0)
-		return ret;
-
-	dp->drm_dev = drm_dev;
-	dp->connected = false;
-	dp->active = false;
-	dp->active_port = -1;
-	dp->fw_loaded = false;
-
-	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
-
-	encoder = &dp->encoder.encoder;
+	int ret;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
 							     dev->of_node);
@@ -1003,26 +1106,35 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 
 	drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
 
-	dp->bridge.ops =
-			DRM_BRIDGE_OP_DETECT |
-			DRM_BRIDGE_OP_EDID |
-			DRM_BRIDGE_OP_HPD |
-			DRM_BRIDGE_OP_DP_AUDIO;
-	dp->bridge.of_node = dp->dev->of_node;
-	dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
-	dp->bridge.hdmi_audio_dev = dp->dev;
-	dp->bridge.hdmi_audio_max_i2s_playback_channels = 8;
-	dp->bridge.hdmi_audio_spdif_playback = 1;
-	dp->bridge.hdmi_audio_dai_port = -1;
-
-	ret = devm_drm_bridge_add(dev, &dp->bridge);
+	bridge->ops =
+		DRM_BRIDGE_OP_DETECT |
+		DRM_BRIDGE_OP_EDID |
+		DRM_BRIDGE_OP_HPD |
+		DRM_BRIDGE_OP_DP_AUDIO;
+	bridge->of_node = dp->dev->of_node;
+	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
+	bridge->hdmi_audio_dev = dp->dev;
+	bridge->hdmi_audio_max_i2s_playback_channels = 8;
+	bridge->hdmi_audio_spdif_playback = 1;
+	bridge->hdmi_audio_dai_port = -1;
+
+	ret = devm_drm_bridge_add(dev, bridge);
 	if (ret)
 		return ret;
 
-	ret = drm_bridge_attach(encoder, &dp->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		return ret;
 
+	if (next_bridge) {
+		ret = drm_bridge_attach(encoder, next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (ret)
+			return ret;
+
+		last_bridge = drm_bridge_chain_get_last_bridge(bridge->encoder);
+	}
+
 	connector = drm_bridge_connector_init(drm_dev, encoder);
 	if (IS_ERR(connector)) {
 		ret = PTR_ERR(connector);
@@ -1030,6 +1142,101 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	if (last_bridge) {
+		fwnode_handle_put(connector->fwnode);
+		connector->fwnode = fwnode_handle_get(of_fwnode_handle(last_bridge->of_node));
+	}
+
+	return 0;
+}
+
+static int cdn_dp_parse_next_bridge_dt(struct cdn_dp_device *dp)
+{
+	struct device_node *np = dp->dev->of_node;
+	struct device_node *port __free(device_node) = of_graph_get_port_by_id(np, 1);
+	struct drm_bridge *bridge;
+	int count = 0;
+	int ret = 0;
+	int i;
+
+	/* If device use extcon, do not use hpd bridge */
+	for (i = 0; i < dp->ports; i++) {
+		if (dp->port[i]->extcon) {
+			dp->bridge_count = 1;
+			return 0;
+		}
+	}
+
+	/* One endpoint may correspond to one next bridge. */
+	for_each_of_graph_port_endpoint(port, dp_ep) {
+		struct device_node *next_bridge_node __free(device_node) =
+			of_graph_get_remote_port_parent(dp_ep);
+
+		bridge = of_drm_find_bridge(next_bridge_node);
+		if (!bridge) {
+			ret = -EPROBE_DEFER;
+			goto out;
+		}
+
+		dp->next_bridge_valid = true;
+		dp->next_bridge_list[count] = drm_bridge_get(bridge);
+		count++;
+	}
+
+out:
+	dp->bridge_count = count ? count : 1;
+	return ret;
+}
+
+static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+{
+	struct cdn_dp_device *dp = dev_get_drvdata(dev);
+	struct drm_bridge *bridge, *next_bridge;
+	struct drm_encoder *encoder;
+	struct cdn_dp_port *port;
+	struct drm_device *drm_dev = data;
+	struct cdn_dp_bridge *dp_bridge;
+	int ret, i;
+
+	ret = cdn_dp_parse_dt(dp);
+	if (ret < 0)
+		return ret;
+
+	ret = cdn_dp_parse_next_bridge_dt(dp);
+	if (ret)
+		goto out;
+
+	dp->drm_dev = drm_dev;
+	dp->connected = false;
+	dp->active = false;
+	dp->active_port = -1;
+	dp->fw_loaded = false;
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		dp_bridge = devm_drm_bridge_alloc(dev, struct cdn_dp_bridge, bridge,
+						    &cdn_dp_bridge_funcs);
+		if (IS_ERR(dp_bridge)) {
+			ret = PTR_ERR(dp_bridge);
+			goto out;
+		}
+		dp_bridge->id = i;
+		dp_bridge->parent = dp;
+		if (!dp->next_bridge_valid)
+			dp_bridge->connected = true;
+		dp->bridge_list[i] = dp_bridge;
+	}
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		bridge = &dp->bridge_list[i]->bridge;
+		next_bridge = dp->next_bridge_list[i];
+		ret = cdn_bridge_add(dev, bridge, next_bridge, encoder);
+		if (ret)
+			goto out;
+	}
+
+	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
+
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
@@ -1043,7 +1250,7 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		if (ret) {
 			DRM_DEV_ERROR(dev,
 				      "register EXTCON_DISP_DP notifier err\n");
-			return ret;
+			goto out;
 		}
 	}
 
@@ -1052,15 +1259,29 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	schedule_work(&dp->event_work);
 
 	return 0;
+
+out:
+	for (i = 0; i < MAX_PHY; i++)
+		drm_bridge_put(dp->next_bridge_list[i]);
+
+	return ret;
 }
 
 static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder = &dp->encoder.encoder;
+	struct drm_encoder *encoder;
+	int i;
 
 	cancel_work_sync(&dp->event_work);
-	encoder->funcs->destroy(encoder);
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		encoder->funcs->destroy(encoder);
+		drm_bridge_put(dp->next_bridge_list[i]);
+	}
+
+	for (i = 0; i < MAX_PHY; i++)
+		drm_edid_free(dp->edid_cache[i]);
 
 	pm_runtime_disable(dev);
 	if (dp->fw_loaded)
@@ -1111,10 +1332,10 @@ static int cdn_dp_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	dp = devm_drm_bridge_alloc(dev, struct cdn_dp_device, bridge,
-				   &cdn_dp_bridge_funcs);
-	if (IS_ERR(dp))
-		return PTR_ERR(dp);
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
 	dp->dev = dev;
 
 	match = of_match_node(cdn_dp_dt_ids, pdev->dev.of_node);
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.h b/drivers/gpu/drm/rockchip/cdn-dp-core.h
index e9c30b9fd543..c10e423bbf06 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
@@ -38,6 +38,8 @@ enum vic_pxl_encoding_format {
 	Y_ONLY = 0x10,
 };
 
+struct cdn_dp_device;
+
 struct video_info {
 	bool h_sync_polarity;
 	bool v_sync_polarity;
@@ -63,16 +65,28 @@ struct cdn_dp_port {
 	u8 id;
 };
 
+struct cdn_dp_bridge {
+	struct cdn_dp_device *parent;
+	struct drm_bridge bridge;
+	struct rockchip_encoder encoder;
+	bool connected;
+	bool enabled;
+	int id;
+};
+
 struct cdn_dp_device {
 	struct device *dev;
 	struct drm_device *drm_dev;
-	struct drm_bridge bridge;
-	struct rockchip_encoder encoder;
+	int bridge_count;
+	struct cdn_dp_bridge *bridge_list[MAX_PHY];
+	struct drm_bridge *next_bridge_list[MAX_PHY];
+	const struct drm_edid *edid_cache[MAX_PHY];
 	struct drm_display_mode mode;
 	struct platform_device *audio_pdev;
 	struct work_struct event_work;
 
 	struct mutex lock;
+	bool next_bridge_valid;
 	bool connected;
 	bool active;
 	bool suspended;
-- 
2.53.0

[PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. And
the CDN-DP can be switched to output to one of the PHYs. If both ports
are plugged into DP, DP will select the first port for output.

This patch adds support for multiple bridges, enabling users to flexibly
select the output port. For each PHY port, a separate encoder and bridge
are registered.

The change is based on the DRM AUX HPD bridge, rather than the
extcon approach. This requires the DT to correctly describe the
connections between the first bridge in bridge chain and DP
controller. For example, the bridge chain may be like this:

PHY aux birdge -> fsa4480 analog audio switch bridge ->
onnn,nb7vpq904m USB reminder bridge -> USB-C controller AUX HPD bridge

In this case, the connection relationships among the PHY aux bridge
and the DP contorller need to be described in DT.

In addition, the cdn_dp_parse_next_bridge_dt() will parses it and
determines whether to register one or two bridges.

Since there is only one DP controller, only one of the PHY ports can
output at a time. The key is how to switch between different PHYs,
which is handled by cdn_dp_switch_port() and cdn_dp_enable().

There are two cases:

1. Neither bridge is enabled. In this case, both bridges can
independently read the EDID, and the PHY port may switch before
reading the EDID.

2. One bridge is already enabled. In this case, other bridges are not
allowed to read the EDID. So we will try to return the cached EDID.

Since the scenario of two ports plug in at the same time is rare,
I don't have a board which support two TypeC connector to test this.
Therefore, I tested forced switching on a single PHY port, as well as
output using a fake PHY port alongside a real PHY port.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v4)

Changes in v3:
- Remove now-redundant call to drm_connector_attach_encoder()

Changes in v2:
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.
---
 drivers/gpu/drm/rockchip/Kconfig       |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 333 ++++++++++++++++++++-----
 drivers/gpu/drm/rockchip/cdn-dp-core.h |  18 +-
 3 files changed, 294 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index e7f49fe845ea..ce70f91c13e6 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -60,6 +60,7 @@ config ROCKCHIP_CDN_DP
 	select DRM_DISPLAY_HELPER
 	select DRM_BRIDGE_CONNECTOR
 	select DRM_DISPLAY_DP_HELPER
+	select DRM_AUX_HPD_BRIDGE
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the cdn DP driver. If you want to enable Dp on
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 74e1f5422a6e..5e513f6930cb 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -28,16 +28,17 @@
 #include "cdn-dp-core.h"
 #include "cdn-dp-reg.h"
 
-static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port);
+
+static inline struct cdn_dp_bridge *bridge_to_dp_bridge(struct drm_bridge *bridge)
 {
-	return container_of(bridge, struct cdn_dp_device, bridge);
+	return container_of(bridge, struct cdn_dp_bridge, bridge);
 }
 
-static inline struct cdn_dp_device *encoder_to_dp(struct drm_encoder *encoder)
+static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
 {
-	struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
-
-	return container_of(rkencoder, struct cdn_dp_device, encoder);
+	return bridge_to_dp_bridge(bridge)->parent;
 }
 
 #define GRF_SOC_CON9		0x6224
@@ -192,14 +193,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
 static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
 {
 	struct cdn_dp_port *port;
-	int i, lanes;
+	int i, lanes[MAX_PHY];
 
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
-		lanes = cdn_dp_get_port_lanes(port);
-		if (lanes)
+		lanes[i] = cdn_dp_get_port_lanes(port);
+		if (!dp->next_bridge_valid)
 			return port;
 	}
+
+	if (dp->next_bridge_valid) {
+		/* If more than one port is available, pick the last active port */
+		if (dp->active_port >= 0 && lanes[dp->active_port])
+			return dp->port[dp->active_port];
+
+		/* If the last active port is not available, pick an available port in order */
+		for (i = 0; i < dp->bridge_count; i++) {
+			if (lanes[i])
+				return dp->port[i];
+		}
+	}
+
 	return NULL;
 }
 
@@ -254,12 +268,45 @@ static const struct drm_edid *
 cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
-	const struct drm_edid *drm_edid;
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_port *port = dp->port[dp_bridge->id];
+	struct cdn_dp_port *prev_port = NULL;
+	const struct drm_edid *drm_edid = NULL;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
+
+	/* More than one port is available */
+	if (dp->bridge_count > 1 && !port->phy_enabled) {
+		for (i = 0; i < dp->bridge_count; i++) {
+			/* Another port already enable */
+			if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
+				goto get_cache;
+			/* Find already enabled port */
+			if (dp->port[i]->phy_enabled)
+				prev_port = dp->port[i];
+		}
+
+		/* Switch to current port */
+		if (prev_port) {
+			ret = cdn_dp_switch_port(dp, prev_port, port);
+			if (ret)
+				goto get_cache;
+		}
+	}
+
 	drm_edid = drm_edid_read_custom(connector, cdn_dp_get_edid_block, dp);
+	/* replace edid cache */
+	if (dp->edid_cache[dp_bridge->id])
+		drm_edid_free(dp->edid_cache[dp_bridge->id]);
+	dp->edid_cache[dp_bridge->id] = drm_edid_dup(drm_edid);
+
 	mutex_unlock(&dp->lock);
+	return drm_edid;
 
+get_cache:
+	drm_edid = drm_edid_dup(dp->edid_cache[dp_bridge->id]);
+	mutex_unlock(&dp->lock);
 	return drm_edid;
 }
 
@@ -268,12 +315,13 @@ cdn_dp_bridge_mode_valid(struct drm_bridge *bridge,
 			 const struct drm_display_info *display_info,
 			 const struct drm_display_mode *mode)
 {
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
 	u32 requested, actual, rate, sink_max, source_max = 0;
 	u8 lanes, bpc;
 
 	/* If DP is disconnected, every mode is invalid */
-	if (!dp->connected)
+	if (!dp_bridge->connected || !dp->connected)
 		return MODE_BAD;
 
 	switch (display_info->bpc) {
@@ -551,6 +599,50 @@ static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
 	return drm_dp_channel_eq_ok(link_status, min(port->lanes, sink_lanes));
 }
 
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port)
+{
+	int ret;
+
+	ret = cdn_dp_disable_phy(dp, prev_port);
+	if (ret)
+		goto out;
+	ret = cdn_dp_enable_phy(dp, port);
+	if (ret)
+		goto out;
+
+	ret = cdn_dp_get_sink_capability(dp);
+	if (ret) {
+		cdn_dp_disable_phy(dp, port);
+		goto out;
+	}
+
+	dp->lanes = port->lanes;
+
+	if (!cdn_dp_check_link_status(dp)) {
+		dev_info(dp->dev, "Connected with sink; re-train link\n");
+
+		ret = cdn_dp_train_link(dp);
+		if (ret) {
+			dev_err(dp->dev, "Training link failed: %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
+		if (ret) {
+			dev_err(dp->dev, "Failed to idle video %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_config_video(dp);
+		if (ret)
+			dev_err(dp->dev, "Failed to configure video: %d\n", ret);
+	}
+
+out:
+	return ret;
+}
+
 static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 				       struct drm_display_info *display_info)
 {
@@ -572,6 +664,7 @@ static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct drm_connector *connector;
 	int ret, val;
 
@@ -581,7 +674,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	cdn_dp_display_info_update(dp, &connector->display_info);
 
-	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp->encoder.encoder);
+	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp_bridge->encoder.encoder);
 	if (ret < 0) {
 		DRM_DEV_ERROR(dp->dev, "Could not get vop id, %d", ret);
 		return;
@@ -600,6 +693,9 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	mutex_lock(&dp->lock);
 
+	if (dp->next_bridge_valid)
+		dp->active_port = dp_bridge->id;
+
 	ret = cdn_dp_enable(dp);
 	if (ret) {
 		DRM_DEV_ERROR(dp->dev, "Failed to enable bridge %d\n",
@@ -632,6 +728,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 		goto out;
 	}
 
+	dp_bridge->enabled = true;
 out:
 	mutex_unlock(&dp->lock);
 }
@@ -639,9 +736,11 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 static void cdn_dp_bridge_atomic_disable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	int ret;
 
 	mutex_lock(&dp->lock);
+	dp_bridge->enabled = false;
 
 	if (dp->active) {
 		ret = cdn_dp_disable(dp);
@@ -828,6 +927,17 @@ static int cdn_dp_audio_mute_stream(struct drm_bridge *bridge,
 	return ret;
 }
 
+static void cdn_dp_bridge_hpd_notify(struct drm_bridge *bridge,
+				     struct drm_connector *connector,
+				     enum drm_connector_status status)
+{
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+
+	dp->bridge_list[dp_bridge->id]->connected = status == connector_status_connected;
+	schedule_work(&dp->event_work);
+}
+
 static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
@@ -838,6 +948,7 @@ static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_disable = cdn_dp_bridge_atomic_disable,
 	.mode_valid = cdn_dp_bridge_mode_valid,
 	.mode_set = cdn_dp_bridge_mode_set,
+	.hpd_notify = cdn_dp_bridge_hpd_notify,
 
 	.dp_audio_prepare = cdn_dp_audio_prepare,
 	.dp_audio_mute_stream = cdn_dp_audio_mute_stream,
@@ -886,7 +997,8 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 {
 	struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
 						event_work);
-	int ret;
+	bool connected;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
 
@@ -945,9 +1057,12 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 
 out:
 	mutex_unlock(&dp->lock);
-	drm_bridge_hpd_notify(&dp->bridge,
-			      dp->connected ? connector_status_connected
-					    : connector_status_disconnected);
+	for (i = 0; i < dp->bridge_count; i++) {
+		connected = dp->connected && dp->bridge_list[i]->connected;
+		drm_bridge_hpd_notify(&dp->bridge_list[i]->bridge,
+				      connected ? connector_status_connected
+						: connector_status_disconnected);
+	}
 }
 
 static int cdn_dp_pd_event(struct notifier_block *nb,
@@ -967,28 +1082,16 @@ static int cdn_dp_pd_event(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+static int cdn_bridge_add(struct device *dev,
+			  struct drm_bridge *bridge,
+			  struct drm_bridge *next_bridge,
+			  struct drm_encoder *encoder)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder;
+	struct drm_device *drm_dev = dp->drm_dev;
+	struct drm_bridge *last_bridge __free(drm_bridge_put) = NULL;
 	struct drm_connector *connector;
-	struct cdn_dp_port *port;
-	struct drm_device *drm_dev = data;
-	int ret, i;
-
-	ret = cdn_dp_parse_dt(dp);
-	if (ret < 0)
-		return ret;
-
-	dp->drm_dev = drm_dev;
-	dp->connected = false;
-	dp->active = false;
-	dp->active_port = -1;
-	dp->fw_loaded = false;
-
-	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
-
-	encoder = &dp->encoder.encoder;
+	int ret;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
 							     dev->of_node);
@@ -1003,26 +1106,35 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 
 	drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
 
-	dp->bridge.ops =
-			DRM_BRIDGE_OP_DETECT |
-			DRM_BRIDGE_OP_EDID |
-			DRM_BRIDGE_OP_HPD |
-			DRM_BRIDGE_OP_DP_AUDIO;
-	dp->bridge.of_node = dp->dev->of_node;
-	dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
-	dp->bridge.hdmi_audio_dev = dp->dev;
-	dp->bridge.hdmi_audio_max_i2s_playback_channels = 8;
-	dp->bridge.hdmi_audio_spdif_playback = 1;
-	dp->bridge.hdmi_audio_dai_port = -1;
-
-	ret = devm_drm_bridge_add(dev, &dp->bridge);
+	bridge->ops =
+		DRM_BRIDGE_OP_DETECT |
+		DRM_BRIDGE_OP_EDID |
+		DRM_BRIDGE_OP_HPD |
+		DRM_BRIDGE_OP_DP_AUDIO;
+	bridge->of_node = dp->dev->of_node;
+	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
+	bridge->hdmi_audio_dev = dp->dev;
+	bridge->hdmi_audio_max_i2s_playback_channels = 8;
+	bridge->hdmi_audio_spdif_playback = 1;
+	bridge->hdmi_audio_dai_port = -1;
+
+	ret = devm_drm_bridge_add(dev, bridge);
 	if (ret)
 		return ret;
 
-	ret = drm_bridge_attach(encoder, &dp->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		return ret;
 
+	if (next_bridge) {
+		ret = drm_bridge_attach(encoder, next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (ret)
+			return ret;
+
+		last_bridge = drm_bridge_chain_get_last_bridge(bridge->encoder);
+	}
+
 	connector = drm_bridge_connector_init(drm_dev, encoder);
 	if (IS_ERR(connector)) {
 		ret = PTR_ERR(connector);
@@ -1030,6 +1142,101 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	if (last_bridge) {
+		fwnode_handle_put(connector->fwnode);
+		connector->fwnode = fwnode_handle_get(of_fwnode_handle(last_bridge->of_node));
+	}
+
+	return 0;
+}
+
+static int cdn_dp_parse_next_bridge_dt(struct cdn_dp_device *dp)
+{
+	struct device_node *np = dp->dev->of_node;
+	struct device_node *port __free(device_node) = of_graph_get_port_by_id(np, 1);
+	struct drm_bridge *bridge;
+	int count = 0;
+	int ret = 0;
+	int i;
+
+	/* If device use extcon, do not use hpd bridge */
+	for (i = 0; i < dp->ports; i++) {
+		if (dp->port[i]->extcon) {
+			dp->bridge_count = 1;
+			return 0;
+		}
+	}
+
+	/* One endpoint may correspond to one next bridge. */
+	for_each_of_graph_port_endpoint(port, dp_ep) {
+		struct device_node *next_bridge_node __free(device_node) =
+			of_graph_get_remote_port_parent(dp_ep);
+
+		bridge = of_drm_find_bridge(next_bridge_node);
+		if (!bridge) {
+			ret = -EPROBE_DEFER;
+			goto out;
+		}
+
+		dp->next_bridge_valid = true;
+		dp->next_bridge_list[count] = drm_bridge_get(bridge);
+		count++;
+	}
+
+out:
+	dp->bridge_count = count ? count : 1;
+	return ret;
+}
+
+static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+{
+	struct cdn_dp_device *dp = dev_get_drvdata(dev);
+	struct drm_bridge *bridge, *next_bridge;
+	struct drm_encoder *encoder;
+	struct cdn_dp_port *port;
+	struct drm_device *drm_dev = data;
+	struct cdn_dp_bridge *dp_bridge;
+	int ret, i;
+
+	ret = cdn_dp_parse_dt(dp);
+	if (ret < 0)
+		return ret;
+
+	ret = cdn_dp_parse_next_bridge_dt(dp);
+	if (ret)
+		goto out;
+
+	dp->drm_dev = drm_dev;
+	dp->connected = false;
+	dp->active = false;
+	dp->active_port = -1;
+	dp->fw_loaded = false;
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		dp_bridge = devm_drm_bridge_alloc(dev, struct cdn_dp_bridge, bridge,
+						    &cdn_dp_bridge_funcs);
+		if (IS_ERR(dp_bridge)) {
+			ret = PTR_ERR(dp_bridge);
+			goto out;
+		}
+		dp_bridge->id = i;
+		dp_bridge->parent = dp;
+		if (!dp->next_bridge_valid)
+			dp_bridge->connected = true;
+		dp->bridge_list[i] = dp_bridge;
+	}
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		bridge = &dp->bridge_list[i]->bridge;
+		next_bridge = dp->next_bridge_list[i];
+		ret = cdn_bridge_add(dev, bridge, next_bridge, encoder);
+		if (ret)
+			goto out;
+	}
+
+	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
+
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
@@ -1043,7 +1250,7 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		if (ret) {
 			DRM_DEV_ERROR(dev,
 				      "register EXTCON_DISP_DP notifier err\n");
-			return ret;
+			goto out;
 		}
 	}
 
@@ -1052,15 +1259,29 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	schedule_work(&dp->event_work);
 
 	return 0;
+
+out:
+	for (i = 0; i < MAX_PHY; i++)
+		drm_bridge_put(dp->next_bridge_list[i]);
+
+	return ret;
 }
 
 static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder = &dp->encoder.encoder;
+	struct drm_encoder *encoder;
+	int i;
 
 	cancel_work_sync(&dp->event_work);
-	encoder->funcs->destroy(encoder);
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		encoder->funcs->destroy(encoder);
+		drm_bridge_put(dp->next_bridge_list[i]);
+	}
+
+	for (i = 0; i < MAX_PHY; i++)
+		drm_edid_free(dp->edid_cache[i]);
 
 	pm_runtime_disable(dev);
 	if (dp->fw_loaded)
@@ -1111,10 +1332,10 @@ static int cdn_dp_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	dp = devm_drm_bridge_alloc(dev, struct cdn_dp_device, bridge,
-				   &cdn_dp_bridge_funcs);
-	if (IS_ERR(dp))
-		return PTR_ERR(dp);
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
 	dp->dev = dev;
 
 	match = of_match_node(cdn_dp_dt_ids, pdev->dev.of_node);
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.h b/drivers/gpu/drm/rockchip/cdn-dp-core.h
index e9c30b9fd543..c10e423bbf06 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
@@ -38,6 +38,8 @@ enum vic_pxl_encoding_format {
 	Y_ONLY = 0x10,
 };
 
+struct cdn_dp_device;
+
 struct video_info {
 	bool h_sync_polarity;
 	bool v_sync_polarity;
@@ -63,16 +65,28 @@ struct cdn_dp_port {
 	u8 id;
 };
 
+struct cdn_dp_bridge {
+	struct cdn_dp_device *parent;
+	struct drm_bridge bridge;
+	struct rockchip_encoder encoder;
+	bool connected;
+	bool enabled;
+	int id;
+};
+
 struct cdn_dp_device {
 	struct device *dev;
 	struct drm_device *drm_dev;
-	struct drm_bridge bridge;
-	struct rockchip_encoder encoder;
+	int bridge_count;
+	struct cdn_dp_bridge *bridge_list[MAX_PHY];
+	struct drm_bridge *next_bridge_list[MAX_PHY];
+	const struct drm_edid *edid_cache[MAX_PHY];
 	struct drm_display_mode mode;
 	struct platform_device *audio_pdev;
 	struct work_struct event_work;
 
 	struct mutex lock;
+	bool next_bridge_valid;
 	bool connected;
 	bool active;
 	bool suspended;
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

[Chaoyi Chen]

From: Chaoyi Chen <chaoyi.chen@rock-chips.com>

The RK3399 has two USB/DP combo PHY and one CDN-DP controller. And
the CDN-DP can be switched to output to one of the PHYs. If both ports
are plugged into DP, DP will select the first port for output.

This patch adds support for multiple bridges, enabling users to flexibly
select the output port. For each PHY port, a separate encoder and bridge
are registered.

The change is based on the DRM AUX HPD bridge, rather than the
extcon approach. This requires the DT to correctly describe the
connections between the first bridge in bridge chain and DP
controller. For example, the bridge chain may be like this:

PHY aux birdge -> fsa4480 analog audio switch bridge ->
onnn,nb7vpq904m USB reminder bridge -> USB-C controller AUX HPD bridge

In this case, the connection relationships among the PHY aux bridge
and the DP contorller need to be described in DT.

In addition, the cdn_dp_parse_next_bridge_dt() will parses it and
determines whether to register one or two bridges.

Since there is only one DP controller, only one of the PHY ports can
output at a time. The key is how to switch between different PHYs,
which is handled by cdn_dp_switch_port() and cdn_dp_enable().

There are two cases:

1. Neither bridge is enabled. In this case, both bridges can
independently read the EDID, and the PHY port may switch before
reading the EDID.

2. One bridge is already enabled. In this case, other bridges are not
allowed to read the EDID. So we will try to return the cached EDID.

Since the scenario of two ports plug in at the same time is rare,
I don't have a board which support two TypeC connector to test this.
Therefore, I tested forced switching on a single PHY port, as well as
output using a fake PHY port alongside a real PHY port.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

(no changes since v4)

Changes in v3:
- Remove now-redundant call to drm_connector_attach_encoder()

Changes in v2:
- Fix the check logic for dp->active_port (0 is valid).
- Fix the uninitialized prev_port.
- Remove duplicate logic from cdn_dp_switch_port().
- Fix the prototype of cdn_dp_bridge_hpd_notify().
- Properly release connector->fwnode.
- Properly release next_bridge.
---
 drivers/gpu/drm/rockchip/Kconfig       |   1 +
 drivers/gpu/drm/rockchip/cdn-dp-core.c | 333 ++++++++++++++++++++-----
 drivers/gpu/drm/rockchip/cdn-dp-core.h |  18 +-
 3 files changed, 294 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index e7f49fe845ea..ce70f91c13e6 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -60,6 +60,7 @@ config ROCKCHIP_CDN_DP
 	select DRM_DISPLAY_HELPER
 	select DRM_BRIDGE_CONNECTOR
 	select DRM_DISPLAY_DP_HELPER
+	select DRM_AUX_HPD_BRIDGE
 	help
 	  This selects support for Rockchip SoC specific extensions
 	  for the cdn DP driver. If you want to enable Dp on
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
index 74e1f5422a6e..5e513f6930cb 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
@@ -28,16 +28,17 @@
 #include "cdn-dp-core.h"
 #include "cdn-dp-reg.h"
 
-static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port);
+
+static inline struct cdn_dp_bridge *bridge_to_dp_bridge(struct drm_bridge *bridge)
 {
-	return container_of(bridge, struct cdn_dp_device, bridge);
+	return container_of(bridge, struct cdn_dp_bridge, bridge);
 }
 
-static inline struct cdn_dp_device *encoder_to_dp(struct drm_encoder *encoder)
+static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
 {
-	struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
-
-	return container_of(rkencoder, struct cdn_dp_device, encoder);
+	return bridge_to_dp_bridge(bridge)->parent;
 }
 
 #define GRF_SOC_CON9		0x6224
@@ -192,14 +193,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
 static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
 {
 	struct cdn_dp_port *port;
-	int i, lanes;
+	int i, lanes[MAX_PHY];
 
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
-		lanes = cdn_dp_get_port_lanes(port);
-		if (lanes)
+		lanes[i] = cdn_dp_get_port_lanes(port);
+		if (!dp->next_bridge_valid)
 			return port;
 	}
+
+	if (dp->next_bridge_valid) {
+		/* If more than one port is available, pick the last active port */
+		if (dp->active_port >= 0 && lanes[dp->active_port])
+			return dp->port[dp->active_port];
+
+		/* If the last active port is not available, pick an available port in order */
+		for (i = 0; i < dp->bridge_count; i++) {
+			if (lanes[i])
+				return dp->port[i];
+		}
+	}
+
 	return NULL;
 }
 
@@ -254,12 +268,45 @@ static const struct drm_edid *
 cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
-	const struct drm_edid *drm_edid;
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_port *port = dp->port[dp_bridge->id];
+	struct cdn_dp_port *prev_port = NULL;
+	const struct drm_edid *drm_edid = NULL;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
+
+	/* More than one port is available */
+	if (dp->bridge_count > 1 && !port->phy_enabled) {
+		for (i = 0; i < dp->bridge_count; i++) {
+			/* Another port already enable */
+			if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
+				goto get_cache;
+			/* Find already enabled port */
+			if (dp->port[i]->phy_enabled)
+				prev_port = dp->port[i];
+		}
+
+		/* Switch to current port */
+		if (prev_port) {
+			ret = cdn_dp_switch_port(dp, prev_port, port);
+			if (ret)
+				goto get_cache;
+		}
+	}
+
 	drm_edid = drm_edid_read_custom(connector, cdn_dp_get_edid_block, dp);
+	/* replace edid cache */
+	if (dp->edid_cache[dp_bridge->id])
+		drm_edid_free(dp->edid_cache[dp_bridge->id]);
+	dp->edid_cache[dp_bridge->id] = drm_edid_dup(drm_edid);
+
 	mutex_unlock(&dp->lock);
+	return drm_edid;
 
+get_cache:
+	drm_edid = drm_edid_dup(dp->edid_cache[dp_bridge->id]);
+	mutex_unlock(&dp->lock);
 	return drm_edid;
 }
 
@@ -268,12 +315,13 @@ cdn_dp_bridge_mode_valid(struct drm_bridge *bridge,
 			 const struct drm_display_info *display_info,
 			 const struct drm_display_mode *mode)
 {
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
 	u32 requested, actual, rate, sink_max, source_max = 0;
 	u8 lanes, bpc;
 
 	/* If DP is disconnected, every mode is invalid */
-	if (!dp->connected)
+	if (!dp_bridge->connected || !dp->connected)
 		return MODE_BAD;
 
 	switch (display_info->bpc) {
@@ -551,6 +599,50 @@ static bool cdn_dp_check_link_status(struct cdn_dp_device *dp)
 	return drm_dp_channel_eq_ok(link_status, min(port->lanes, sink_lanes));
 }
 
+static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
+			      struct cdn_dp_port *port)
+{
+	int ret;
+
+	ret = cdn_dp_disable_phy(dp, prev_port);
+	if (ret)
+		goto out;
+	ret = cdn_dp_enable_phy(dp, port);
+	if (ret)
+		goto out;
+
+	ret = cdn_dp_get_sink_capability(dp);
+	if (ret) {
+		cdn_dp_disable_phy(dp, port);
+		goto out;
+	}
+
+	dp->lanes = port->lanes;
+
+	if (!cdn_dp_check_link_status(dp)) {
+		dev_info(dp->dev, "Connected with sink; re-train link\n");
+
+		ret = cdn_dp_train_link(dp);
+		if (ret) {
+			dev_err(dp->dev, "Training link failed: %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
+		if (ret) {
+			dev_err(dp->dev, "Failed to idle video %d\n", ret);
+			goto out;
+		}
+
+		ret = cdn_dp_config_video(dp);
+		if (ret)
+			dev_err(dp->dev, "Failed to configure video: %d\n", ret);
+	}
+
+out:
+	return ret;
+}
+
 static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 				       struct drm_display_info *display_info)
 {
@@ -572,6 +664,7 @@ static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
 static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	struct drm_connector *connector;
 	int ret, val;
 
@@ -581,7 +674,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	cdn_dp_display_info_update(dp, &connector->display_info);
 
-	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp->encoder.encoder);
+	ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp_bridge->encoder.encoder);
 	if (ret < 0) {
 		DRM_DEV_ERROR(dp->dev, "Could not get vop id, %d", ret);
 		return;
@@ -600,6 +693,9 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 
 	mutex_lock(&dp->lock);
 
+	if (dp->next_bridge_valid)
+		dp->active_port = dp_bridge->id;
+
 	ret = cdn_dp_enable(dp);
 	if (ret) {
 		DRM_DEV_ERROR(dp->dev, "Failed to enable bridge %d\n",
@@ -632,6 +728,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 		goto out;
 	}
 
+	dp_bridge->enabled = true;
 out:
 	mutex_unlock(&dp->lock);
 }
@@ -639,9 +736,11 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
 static void cdn_dp_bridge_atomic_disable(struct drm_bridge *bridge, struct drm_atomic_commit *state)
 {
 	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
 	int ret;
 
 	mutex_lock(&dp->lock);
+	dp_bridge->enabled = false;
 
 	if (dp->active) {
 		ret = cdn_dp_disable(dp);
@@ -828,6 +927,17 @@ static int cdn_dp_audio_mute_stream(struct drm_bridge *bridge,
 	return ret;
 }
 
+static void cdn_dp_bridge_hpd_notify(struct drm_bridge *bridge,
+				     struct drm_connector *connector,
+				     enum drm_connector_status status)
+{
+	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
+	struct cdn_dp_device *dp = bridge_to_dp(bridge);
+
+	dp->bridge_list[dp_bridge->id]->connected = status == connector_status_connected;
+	schedule_work(&dp->event_work);
+}
+
 static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
@@ -838,6 +948,7 @@ static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
 	.atomic_disable = cdn_dp_bridge_atomic_disable,
 	.mode_valid = cdn_dp_bridge_mode_valid,
 	.mode_set = cdn_dp_bridge_mode_set,
+	.hpd_notify = cdn_dp_bridge_hpd_notify,
 
 	.dp_audio_prepare = cdn_dp_audio_prepare,
 	.dp_audio_mute_stream = cdn_dp_audio_mute_stream,
@@ -886,7 +997,8 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 {
 	struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
 						event_work);
-	int ret;
+	bool connected;
+	int i, ret;
 
 	mutex_lock(&dp->lock);
 
@@ -945,9 +1057,12 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
 
 out:
 	mutex_unlock(&dp->lock);
-	drm_bridge_hpd_notify(&dp->bridge,
-			      dp->connected ? connector_status_connected
-					    : connector_status_disconnected);
+	for (i = 0; i < dp->bridge_count; i++) {
+		connected = dp->connected && dp->bridge_list[i]->connected;
+		drm_bridge_hpd_notify(&dp->bridge_list[i]->bridge,
+				      connected ? connector_status_connected
+						: connector_status_disconnected);
+	}
 }
 
 static int cdn_dp_pd_event(struct notifier_block *nb,
@@ -967,28 +1082,16 @@ static int cdn_dp_pd_event(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
-static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+static int cdn_bridge_add(struct device *dev,
+			  struct drm_bridge *bridge,
+			  struct drm_bridge *next_bridge,
+			  struct drm_encoder *encoder)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder;
+	struct drm_device *drm_dev = dp->drm_dev;
+	struct drm_bridge *last_bridge __free(drm_bridge_put) = NULL;
 	struct drm_connector *connector;
-	struct cdn_dp_port *port;
-	struct drm_device *drm_dev = data;
-	int ret, i;
-
-	ret = cdn_dp_parse_dt(dp);
-	if (ret < 0)
-		return ret;
-
-	dp->drm_dev = drm_dev;
-	dp->connected = false;
-	dp->active = false;
-	dp->active_port = -1;
-	dp->fw_loaded = false;
-
-	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
-
-	encoder = &dp->encoder.encoder;
+	int ret;
 
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
 							     dev->of_node);
@@ -1003,26 +1106,35 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 
 	drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
 
-	dp->bridge.ops =
-			DRM_BRIDGE_OP_DETECT |
-			DRM_BRIDGE_OP_EDID |
-			DRM_BRIDGE_OP_HPD |
-			DRM_BRIDGE_OP_DP_AUDIO;
-	dp->bridge.of_node = dp->dev->of_node;
-	dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
-	dp->bridge.hdmi_audio_dev = dp->dev;
-	dp->bridge.hdmi_audio_max_i2s_playback_channels = 8;
-	dp->bridge.hdmi_audio_spdif_playback = 1;
-	dp->bridge.hdmi_audio_dai_port = -1;
-
-	ret = devm_drm_bridge_add(dev, &dp->bridge);
+	bridge->ops =
+		DRM_BRIDGE_OP_DETECT |
+		DRM_BRIDGE_OP_EDID |
+		DRM_BRIDGE_OP_HPD |
+		DRM_BRIDGE_OP_DP_AUDIO;
+	bridge->of_node = dp->dev->of_node;
+	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
+	bridge->hdmi_audio_dev = dp->dev;
+	bridge->hdmi_audio_max_i2s_playback_channels = 8;
+	bridge->hdmi_audio_spdif_playback = 1;
+	bridge->hdmi_audio_dai_port = -1;
+
+	ret = devm_drm_bridge_add(dev, bridge);
 	if (ret)
 		return ret;
 
-	ret = drm_bridge_attach(encoder, &dp->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret)
 		return ret;
 
+	if (next_bridge) {
+		ret = drm_bridge_attach(encoder, next_bridge, bridge,
+					DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (ret)
+			return ret;
+
+		last_bridge = drm_bridge_chain_get_last_bridge(bridge->encoder);
+	}
+
 	connector = drm_bridge_connector_init(drm_dev, encoder);
 	if (IS_ERR(connector)) {
 		ret = PTR_ERR(connector);
@@ -1030,6 +1142,101 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
+	if (last_bridge) {
+		fwnode_handle_put(connector->fwnode);
+		connector->fwnode = fwnode_handle_get(of_fwnode_handle(last_bridge->of_node));
+	}
+
+	return 0;
+}
+
+static int cdn_dp_parse_next_bridge_dt(struct cdn_dp_device *dp)
+{
+	struct device_node *np = dp->dev->of_node;
+	struct device_node *port __free(device_node) = of_graph_get_port_by_id(np, 1);
+	struct drm_bridge *bridge;
+	int count = 0;
+	int ret = 0;
+	int i;
+
+	/* If device use extcon, do not use hpd bridge */
+	for (i = 0; i < dp->ports; i++) {
+		if (dp->port[i]->extcon) {
+			dp->bridge_count = 1;
+			return 0;
+		}
+	}
+
+	/* One endpoint may correspond to one next bridge. */
+	for_each_of_graph_port_endpoint(port, dp_ep) {
+		struct device_node *next_bridge_node __free(device_node) =
+			of_graph_get_remote_port_parent(dp_ep);
+
+		bridge = of_drm_find_bridge(next_bridge_node);
+		if (!bridge) {
+			ret = -EPROBE_DEFER;
+			goto out;
+		}
+
+		dp->next_bridge_valid = true;
+		dp->next_bridge_list[count] = drm_bridge_get(bridge);
+		count++;
+	}
+
+out:
+	dp->bridge_count = count ? count : 1;
+	return ret;
+}
+
+static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
+{
+	struct cdn_dp_device *dp = dev_get_drvdata(dev);
+	struct drm_bridge *bridge, *next_bridge;
+	struct drm_encoder *encoder;
+	struct cdn_dp_port *port;
+	struct drm_device *drm_dev = data;
+	struct cdn_dp_bridge *dp_bridge;
+	int ret, i;
+
+	ret = cdn_dp_parse_dt(dp);
+	if (ret < 0)
+		return ret;
+
+	ret = cdn_dp_parse_next_bridge_dt(dp);
+	if (ret)
+		goto out;
+
+	dp->drm_dev = drm_dev;
+	dp->connected = false;
+	dp->active = false;
+	dp->active_port = -1;
+	dp->fw_loaded = false;
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		dp_bridge = devm_drm_bridge_alloc(dev, struct cdn_dp_bridge, bridge,
+						    &cdn_dp_bridge_funcs);
+		if (IS_ERR(dp_bridge)) {
+			ret = PTR_ERR(dp_bridge);
+			goto out;
+		}
+		dp_bridge->id = i;
+		dp_bridge->parent = dp;
+		if (!dp->next_bridge_valid)
+			dp_bridge->connected = true;
+		dp->bridge_list[i] = dp_bridge;
+	}
+
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		bridge = &dp->bridge_list[i]->bridge;
+		next_bridge = dp->next_bridge_list[i];
+		ret = cdn_bridge_add(dev, bridge, next_bridge, encoder);
+		if (ret)
+			goto out;
+	}
+
+	INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
+
 	for (i = 0; i < dp->ports; i++) {
 		port = dp->port[i];
 
@@ -1043,7 +1250,7 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 		if (ret) {
 			DRM_DEV_ERROR(dev,
 				      "register EXTCON_DISP_DP notifier err\n");
-			return ret;
+			goto out;
 		}
 	}
 
@@ -1052,15 +1259,29 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
 	schedule_work(&dp->event_work);
 
 	return 0;
+
+out:
+	for (i = 0; i < MAX_PHY; i++)
+		drm_bridge_put(dp->next_bridge_list[i]);
+
+	return ret;
 }
 
 static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
 {
 	struct cdn_dp_device *dp = dev_get_drvdata(dev);
-	struct drm_encoder *encoder = &dp->encoder.encoder;
+	struct drm_encoder *encoder;
+	int i;
 
 	cancel_work_sync(&dp->event_work);
-	encoder->funcs->destroy(encoder);
+	for (i = 0; i < dp->bridge_count; i++) {
+		encoder = &dp->bridge_list[i]->encoder.encoder;
+		encoder->funcs->destroy(encoder);
+		drm_bridge_put(dp->next_bridge_list[i]);
+	}
+
+	for (i = 0; i < MAX_PHY; i++)
+		drm_edid_free(dp->edid_cache[i]);
 
 	pm_runtime_disable(dev);
 	if (dp->fw_loaded)
@@ -1111,10 +1332,10 @@ static int cdn_dp_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	dp = devm_drm_bridge_alloc(dev, struct cdn_dp_device, bridge,
-				   &cdn_dp_bridge_funcs);
-	if (IS_ERR(dp))
-		return PTR_ERR(dp);
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+
 	dp->dev = dev;
 
 	match = of_match_node(cdn_dp_dt_ids, pdev->dev.of_node);
diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.h b/drivers/gpu/drm/rockchip/cdn-dp-core.h
index e9c30b9fd543..c10e423bbf06 100644
--- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
+++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
@@ -38,6 +38,8 @@ enum vic_pxl_encoding_format {
 	Y_ONLY = 0x10,
 };
 
+struct cdn_dp_device;
+
 struct video_info {
 	bool h_sync_polarity;
 	bool v_sync_polarity;
@@ -63,16 +65,28 @@ struct cdn_dp_port {
 	u8 id;
 };
 
+struct cdn_dp_bridge {
+	struct cdn_dp_device *parent;
+	struct drm_bridge bridge;
+	struct rockchip_encoder encoder;
+	bool connected;
+	bool enabled;
+	int id;
+};
+
 struct cdn_dp_device {
 	struct device *dev;
 	struct drm_device *drm_dev;
-	struct drm_bridge bridge;
-	struct rockchip_encoder encoder;
+	int bridge_count;
+	struct cdn_dp_bridge *bridge_list[MAX_PHY];
+	struct drm_bridge *next_bridge_list[MAX_PHY];
+	const struct drm_edid *edid_cache[MAX_PHY];
 	struct drm_display_mode mode;
 	struct platform_device *audio_pdev;
 	struct work_struct event_work;
 
 	struct mutex lock;
+	bool next_bridge_valid;
 	bool connected;
 	bool active;
 	bool suspended;
-- 
2.53.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node()

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Unbalanced `of_node_put()` on the provided device node `np` leads to reference count underflow and potential use-after-free.
--

--- Patch [3]: [PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node() ---
commit 73b014949499087c9b0b99c49dc18c4868428dcd
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/bridge: aux: Add drm_aux_bridge_register_from_node()
    
This patch introduces a new function to register an auxiliary bridge using
a specifically provided device node, instead of defaulting to the parent's
device node.

> diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
> index 1ed21a8713bfd..06a1466f49bd2 100644
> --- a/drivers/gpu/drm/bridge/aux-bridge.c
> +++ b/drivers/gpu/drm/bridge/aux-bridge.c
[ ... ]
> @@ -62,7 +63,10 @@ int drm_aux_bridge_register(struct device *parent)
>  	adev->dev.parent = parent;
>  	adev->dev.release = drm_aux_bridge_release;
>  
> -	device_set_of_node_from_dev(&adev->dev, parent);
> +	if (np)
> +		device_set_node(&adev->dev, of_fwnode_handle(np));

[Severity: High]
Does this path cause a reference count underflow on the provided device node?

When np is provided, device_set_node() simply assigns the node pointer
without taking a reference via of_node_get(). In contrast, the fallback
path device_set_of_node_from_dev() properly acquires a reference.

Both the error path below (when auxiliary_device_init() fails) and the
normal device release callback drm_aux_bridge_release() unconditionally
call of_node_put(adev->dev.of_node). This drops a reference that was never
acquired in the np != NULL branch.

If the API intended to consume a reference from the caller, the error
paths appear to be structurally broken: failure in ida_alloc() does not
drop the reference, but failure in auxiliary_device_init() does, leaving
the caller unable to know if it should clean up the reference.

Should we add an of_node_get() here?

> +	else
> +		device_set_of_node_from_dev(&adev->dev, parent);
>  
>  	ret = auxiliary_device_init(adev);
>  	if (ret) {
[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=3

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node()

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Unbalanced `of_node_put()` on the provided device node `np` leads to reference count underflow and potential use-after-free.
--

--- Patch [3]: [PATCH v5 3/6] drm/bridge: aux: Add drm_aux_bridge_register_from_node() ---
commit 73b014949499087c9b0b99c49dc18c4868428dcd
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/bridge: aux: Add drm_aux_bridge_register_from_node()
    
This patch introduces a new function to register an auxiliary bridge using
a specifically provided device node, instead of defaulting to the parent's
device node.

> diff --git a/drivers/gpu/drm/bridge/aux-bridge.c b/drivers/gpu/drm/bridge/aux-bridge.c
> index 1ed21a8713bfd..06a1466f49bd2 100644
> --- a/drivers/gpu/drm/bridge/aux-bridge.c
> +++ b/drivers/gpu/drm/bridge/aux-bridge.c
[ ... ]
> @@ -62,7 +63,10 @@ int drm_aux_bridge_register(struct device *parent)
>  	adev->dev.parent = parent;
>  	adev->dev.release = drm_aux_bridge_release;
>  
> -	device_set_of_node_from_dev(&adev->dev, parent);
> +	if (np)
> +		device_set_node(&adev->dev, of_fwnode_handle(np));

[Severity: High]
Does this path cause a reference count underflow on the provided device node?

When np is provided, device_set_node() simply assigns the node pointer
without taking a reference via of_node_get(). In contrast, the fallback
path device_set_of_node_from_dev() properly acquires a reference.

Both the error path below (when auxiliary_device_init() fails) and the
normal device release callback drm_aux_bridge_release() unconditionally
call of_node_put(adev->dev.of_node). This drops a reference that was never
acquired in the np != NULL branch.

If the API intended to consume a reference from the caller, the error
paths appear to be structurally broken: failure in ida_alloc() does not
drop the reference, but failure in auxiliary_device_init() does, leaving
the caller unable to know if it should clean up the reference.

Should we add an of_node_get() here?

> +	else
> +		device_set_of_node_from_dev(&adev->dev, parent);
>  
>  	ret = auxiliary_device_init(adev);
>  	if (ret) {
[ ... ]

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=3

Re: [PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] Valid extcon devices are incorrectly skipped during probe due to a flawed pointer error check, breaking all existing platforms that use extcon.
- [High] Hotplug detect (HPD) is completely broken when extcon is not present because no alternative notification mechanism is implemented.
- [High] Unchecked negative error code from `phy_get_bus_width` is implicitly truncated to `u8` and used as a valid lane count, corrupting hardware configuration.
--

--- Patch [5]: [PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon ---
commit 4ff0e4c27809cca886c5ca372b54b8d927541018
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/rockchip: cdn-dp: Support handle lane info without extcon

This commit adds support for getting PHY lane information directly from the
PHY instead of relying on extcon when a Type-C controller is present. It
preserves extcon support for cases where the Type-C controller is absent.

> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> index 190cce9530c82..74e1f5422a6e2 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> @@ -157,6 +157,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
>  	int dptx;
>  	u8 lanes;
>  
> +	if (!edev)
> +		return phy_get_bus_width(port->phy);
> +

[Severity: High]
Can this return a negative error code (like -ENOSYS) that gets truncated?

In cdn_dp_enable_phy(), the return value is directly assigned to an 8-bit
unsigned integer:

	port->lanes = cdn_dp_get_port_lanes(port);

If phy_get_bus_width() returns a negative error, will this result in a
silently truncated out-of-bounds lane count being written to the hardware
registers?

[ ... ]

> @@ -1027,6 +1033,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>  	for (i = 0; i < dp->ports; i++) {
>  		port = dp->port[i];
>  
> +		if (!port->extcon)
> +			continue;
> +

[Severity: High]
Does skipping the notifier registration permanently orphan the driver's
hotplug detect state machine?

The driver's connection state machine is entirely driven by
cdn_dp_pd_event_work(), which is only ever scheduled by the extcon notifier
callback. 

Without an alternative notification mechanism for non-extcon setups, will the
display controller ever be notified of cable insertion?

[ ... ]

> @@ -1119,14 +1128,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
>  		    PTR_ERR(phy) == -EPROBE_DEFER)
>  			return -EPROBE_DEFER;
>  
> -		if (IS_ERR(extcon) || IS_ERR(phy))
> +		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
>  			continue;

[Severity: High]
Will this condition evaluate to true for all valid extcon pointers,
skipping valid extcon devices entirely?

When a valid extcon device is found, PTR_ERR() will cast that pointer
address to a long. Since a valid pointer address will not equal -ENODEV,
this check seems to evaluate to true and skip the port setup for all existing
functional extcon setups.

Should this include an IS_ERR() guard, such as
IS_ERR(extcon) && PTR_ERR(extcon) != -ENODEV?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=5

Re: [PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] Valid extcon devices are incorrectly skipped during probe due to a flawed pointer error check, breaking all existing platforms that use extcon.
- [High] Hotplug detect (HPD) is completely broken when extcon is not present because no alternative notification mechanism is implemented.
- [High] Unchecked negative error code from `phy_get_bus_width` is implicitly truncated to `u8` and used as a valid lane count, corrupting hardware configuration.
--

--- Patch [5]: [PATCH v5 5/6] drm/rockchip: cdn-dp: Support handle lane info without extcon ---
commit 4ff0e4c27809cca886c5ca372b54b8d927541018
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/rockchip: cdn-dp: Support handle lane info without extcon

This commit adds support for getting PHY lane information directly from the
PHY instead of relying on extcon when a Type-C controller is present. It
preserves extcon support for cases where the Type-C controller is absent.

> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> index 190cce9530c82..74e1f5422a6e2 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> @@ -157,6 +157,9 @@ static int cdn_dp_get_port_lanes(struct cdn_dp_port *port)
>  	int dptx;
>  	u8 lanes;
>  
> +	if (!edev)
> +		return phy_get_bus_width(port->phy);
> +

[Severity: High]
Can this return a negative error code (like -ENOSYS) that gets truncated?

In cdn_dp_enable_phy(), the return value is directly assigned to an 8-bit
unsigned integer:

	port->lanes = cdn_dp_get_port_lanes(port);

If phy_get_bus_width() returns a negative error, will this result in a
silently truncated out-of-bounds lane count being written to the hardware
registers?

[ ... ]

> @@ -1027,6 +1033,9 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>  	for (i = 0; i < dp->ports; i++) {
>  		port = dp->port[i];
>  
> +		if (!port->extcon)
> +			continue;
> +

[Severity: High]
Does skipping the notifier registration permanently orphan the driver's
hotplug detect state machine?

The driver's connection state machine is entirely driven by
cdn_dp_pd_event_work(), which is only ever scheduled by the extcon notifier
callback. 

Without an alternative notification mechanism for non-extcon setups, will the
display controller ever be notified of cable insertion?

[ ... ]

> @@ -1119,14 +1128,14 @@ static int cdn_dp_probe(struct platform_device *pdev)
>  		    PTR_ERR(phy) == -EPROBE_DEFER)
>  			return -EPROBE_DEFER;
>  
> -		if (IS_ERR(extcon) || IS_ERR(phy))
> +		if (IS_ERR(phy) || PTR_ERR(extcon) != -ENODEV)
>  			continue;

[Severity: High]
Will this condition evaluate to true for all valid extcon pointers,
skipping valid extcon devices entirely?

When a valid extcon device is found, PTR_ERR() will cast that pointer
address to a long. Since a valid pointer address will not equal -ENODEV,
this check seems to evaluate to true and skip the port setup for all existing
functional extcon setups.

Should this include an IS_ERR() guard, such as
IS_ERR(extcon) && PTR_ERR(extcon) != -ENODEV?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=5

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Double-free of OF node reference resulting from borrowed node assignment
- [Medium] Improper Error Handling: Unconditional execution of bridge registration shadows PHY creation errors
--

--- Patch [4]: [PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge ---
commit c26cb3c5d012dc638272484e672dcad955d4a455
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
    
Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge
device.

> diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
> index d9701b6106d55..48070b50416e5 100644
> --- a/drivers/phy/rockchip/phy-rockchip-typec.c
> +++ b/drivers/phy/rockchip/phy-rockchip-typec.c
[ ... ]
> @@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
>  
>  	for_each_available_child_of_node(np, child_np) {
>  		struct phy *phy;
> +		ret = 0;
>  
> -		if (of_node_name_eq(child_np, "dp-port"))
> +		if (of_node_name_eq(child_np, "dp-port")) {
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_dp_phy_ops);
> -		else if (of_node_name_eq(child_np, "usb3-port"))
> +			ret = drm_aux_bridge_register_from_node(dev, child_np);

[Severity: Medium]
If devm_phy_create() fails and returns an error pointer, the code still
unconditionally calls drm_aux_bridge_register_from_node().

If the bridge registration fails, its error code will be stored in ret
and returned below, which completely shadows the original error from
devm_phy_create() (such as -EPROBE_DEFER).

Should devm_phy_create()'s return value be checked before attempting to
register the bridge?


[Severity: High]
Does this cause a double-free of the child_np node reference?

The for_each_available_child_of_node() loop automatically holds a reference
to child_np. When child_np is passed to drm_aux_bridge_register_from_node(),
the bridge takes ownership of the node reference without the caller acquiring
an additional reference via of_node_get().

If registration succeeds, the bridge will eventually call of_node_put() in
its drm_aux_bridge_release() handler. Meanwhile, the iterator loop also
automatically calls of_node_put() when advancing to the next node, leading
to a double-free on the success path.

> +		} else if (of_node_name_eq(child_np, "usb3-port"))
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_usb3_phy_ops);
>  		else
>  			continue;
>  
> +		if (ret) {
> +			pm_runtime_disable(dev);
> +			of_node_put(child_np);
> +			return ret;
> +		}

[Severity: High]
If drm_aux_bridge_register_from_node() fails, it calls of_node_put()
internally. Because this error path explicitly calls of_node_put(child_np)
again, would this result in an immediate double-free?

Would it be better to call of_node_get(child_np) before passing it to
drm_aux_bridge_register_from_node() to ensure the bridge has its own
reference?

>  		if (IS_ERR(phy)) {
>  			dev_err(dev, "failed to create phy: %pOFn\n",
>  				child_np);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=4

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] Double-free of OF node reference resulting from borrowed node assignment
- [Medium] Improper Error Handling: Unconditional execution of bridge registration shadows PHY creation errors
--

--- Patch [4]: [PATCH v5 4/6] phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge ---
commit c26cb3c5d012dc638272484e672dcad955d4a455
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

phy: rockchip: phy-rockchip-typec: Add DRM AUX bridge
    
Using the DRM_AUX_BRIDGE helper to create the transparent DRM bridge
device.

> diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
> index d9701b6106d55..48070b50416e5 100644
> --- a/drivers/phy/rockchip/phy-rockchip-typec.c
> +++ b/drivers/phy/rockchip/phy-rockchip-typec.c
[ ... ]
> @@ -1162,16 +1163,24 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
>  
>  	for_each_available_child_of_node(np, child_np) {
>  		struct phy *phy;
> +		ret = 0;
>  
> -		if (of_node_name_eq(child_np, "dp-port"))
> +		if (of_node_name_eq(child_np, "dp-port")) {
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_dp_phy_ops);
> -		else if (of_node_name_eq(child_np, "usb3-port"))
> +			ret = drm_aux_bridge_register_from_node(dev, child_np);

[Severity: Medium]
If devm_phy_create() fails and returns an error pointer, the code still
unconditionally calls drm_aux_bridge_register_from_node().

If the bridge registration fails, its error code will be stored in ret
and returned below, which completely shadows the original error from
devm_phy_create() (such as -EPROBE_DEFER).

Should devm_phy_create()'s return value be checked before attempting to
register the bridge?


[Severity: High]
Does this cause a double-free of the child_np node reference?

The for_each_available_child_of_node() loop automatically holds a reference
to child_np. When child_np is passed to drm_aux_bridge_register_from_node(),
the bridge takes ownership of the node reference without the caller acquiring
an additional reference via of_node_get().

If registration succeeds, the bridge will eventually call of_node_put() in
its drm_aux_bridge_release() handler. Meanwhile, the iterator loop also
automatically calls of_node_put() when advancing to the next node, leading
to a double-free on the success path.

> +		} else if (of_node_name_eq(child_np, "usb3-port"))
>  			phy = devm_phy_create(dev, child_np,
>  					      &rockchip_usb3_phy_ops);
>  		else
>  			continue;
>  
> +		if (ret) {
> +			pm_runtime_disable(dev);
> +			of_node_put(child_np);
> +			return ret;
> +		}

[Severity: High]
If drm_aux_bridge_register_from_node() fails, it calls of_node_put()
internally. Because this error path explicitly calls of_node_put(child_np)
again, would this result in an immediate double-free?

Would it be better to call of_node_get(child_np) before passing it to
drm_aux_bridge_register_from_node() to ensure the bridge has its own
reference?

>  		if (IS_ERR(phy)) {
>  			dev_err(dev, "failed to create phy: %pOFn\n",
>  				child_np);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=4

Re: [PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 7 potential issue(s) to consider:

New issues:
- [High] Stale pointers in `dp->next_bridge_list` cause a double free / refcount underflow on repeated or failed bind cycles.
- [High] `cdn_dp_switch_port` unconditionally configures video, breaking EDID reads for newly connected monitors.
- [High] Missing `atomic_check` allows simultaneous activation of multiple conflicting encoders.
- [High] `cdn_dp_connected_port` bypasses the physical lane check for extcon configurations, breaking hotplug detection.
- [High] Index mismatch between packed PHY ports and DT endpoints causes uninitialized memory reads and guaranteed NULL dereferences.
- [Medium] Device tree endpoint iteration lacks a bounds check against `MAX_PHY`, leading to a heap buffer overflow.

Pre-existing issues:
- [High] Extcon notifiers can schedule work after `cancel_work_sync()`, leading to Use-After-Free.
--

--- Patch [6]: [PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection ---
commit 8377956184d44f77846e2394e562e31ea5099865
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

This commit adds support for multiple bridges in the Rockchip CDN-DP
driver to enable PHY port selection via the DRM AUX HPD bridge framework.
It parses device tree endpoints to register one or two bridges and handles
switching the DP controller output between them based on plug states.

> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> index 74e1f5422a6e2..5e513f6930cb9 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
[ ... ]
> @@ -192,14 +193,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
>  static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
>  {
>  	struct cdn_dp_port *port;
> -	int i, lanes;
> +	int i, lanes[MAX_PHY];
>  
>  	for (i = 0; i < dp->ports; i++) {
>  		port = dp->port[i];
> -		lanes = cdn_dp_get_port_lanes(port);
> -		if (lanes)
> +		lanes[i] = cdn_dp_get_port_lanes(port);
> +		if (!dp->next_bridge_valid)
>  			return port;

[Severity: High]
Does this break hotplug detection for legacy extcon-based devices?

If dp->next_bridge_valid is false, this loop unconditionally returns
dp->port[0] on the first iteration without verifying if the physical lanes
are greater than zero. This causes the driver to perpetually report the
display as connected.

>  	}
> +
> +	if (dp->next_bridge_valid) {
> +		/* If more than one port is available, pick the last active port */
> +		if (dp->active_port >= 0 && lanes[dp->active_port])
> +			return dp->port[dp->active_port];
> +
> +		/* If the last active port is not available, pick an available port in order */
> +		for (i = 0; i < dp->bridge_count; i++) {
> +			if (lanes[i])
> +				return dp->port[i];

[Severity: High]
Can this loop read uninitialized stack memory?

The lanes array is populated in the previous loop up to dp->ports, which
tracks successfully probed PHYs. However, this loop iterates up to
dp->bridge_count, which tracks DT endpoints. If a device tree specifies
more endpoints than successfully probed PHYs, this will read out of bounds
on the stack.

> +		}
> +	}
> +
>  	return NULL;
>  }
[ ... ]
> @@ -254,12 +268,45 @@ static const struct drm_edid *
>  cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
>  {
>  	struct cdn_dp_device *dp = bridge_to_dp(bridge);
> -	const struct drm_edid *drm_edid;
> +	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> +	struct cdn_dp_port *port = dp->port[dp_bridge->id];
> +	struct cdn_dp_port *prev_port = NULL;
> +	const struct drm_edid *drm_edid = NULL;
> +	int i, ret;
>  
>  	mutex_lock(&dp->lock);
> +
> +	/* More than one port is available */
> +	if (dp->bridge_count > 1 && !port->phy_enabled) {

[Severity: High]
Is there a risk of a NULL pointer dereference here?

If the device tree has more endpoints than successfully probed PHYs,
dp_bridge->id could exceed the bounds of initialized dp->port pointers.
In that scenario, port would be NULL, and evaluating !port->phy_enabled
will crash.

> +		for (i = 0; i < dp->bridge_count; i++) {
> +			/* Another port already enable */
> +			if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
> +				goto get_cache;
> +			/* Find already enabled port */
> +			if (dp->port[i]->phy_enabled)
> +				prev_port = dp->port[i];
> +		}
> +
> +		/* Switch to current port */
> +		if (prev_port) {
> +			ret = cdn_dp_switch_port(dp, prev_port, port);

[Severity: High]
Will this sequence fail to read the EDID for a newly connected monitor?

Switching the port here calls cdn_dp_switch_port(), which unconditionally
executes cdn_dp_config_video(dp). During EDID probing, no DRM display mode
has been committed yet, so dp->mode.clock is 0. 

This causes cdn_dp_config_video() to fail its bandwidth calculation loop
and return -EINVAL, which aborts the port switch and forces the driver to
fall back to a cached EDID.

> +			if (ret)
> +				goto get_cache;
> +		}
> +	}
[ ... ]
> @@ -838,6 +948,7 @@ static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
>  	.atomic_disable = cdn_dp_bridge_atomic_disable,
>  	.mode_valid = cdn_dp_bridge_mode_valid,
>  	.mode_set = cdn_dp_bridge_mode_set,
> +	.hpd_notify = cdn_dp_bridge_hpd_notify,
>  
>  	.dp_audio_prepare = cdn_dp_audio_prepare,

[Severity: High]
Because there is only a single DP hardware controller backing multiple
potential bridges, is there a risk of hardware state corruption if
userspace commits a state that maps CRTCs to both ports simultaneously?

Without an .atomic_check callback in cdn_dp_bridge_funcs to enforce mutual
exclusivity, cdn_dp_bridge_atomic_enable() could execute for the second
port and overwrite the video configuration while the first is active.

[ ... ]
> @@ -1030,6 +1142,101 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
[ ... ]
> +static int cdn_dp_parse_next_bridge_dt(struct cdn_dp_device *dp)
> +{
[ ... ]
> +	/* One endpoint may correspond to one next bridge. */
> +	for_each_of_graph_port_endpoint(port, dp_ep) {
> +		struct device_node *next_bridge_node __free(device_node) =
> +			of_graph_get_remote_port_parent(dp_ep);
> +
> +		bridge = of_drm_find_bridge(next_bridge_node);
> +		if (!bridge) {
> +			ret = -EPROBE_DEFER;
> +			goto out;
> +		}
> +
> +		dp->next_bridge_valid = true;
> +		dp->next_bridge_list[count] = drm_bridge_get(bridge);
> +		count++;

[Severity: Medium]
Is there a potential heap buffer overflow here?

The count variable is incremented and used as an index for
dp->next_bridge_list[count], but there is no bounds check against MAX_PHY.
If a misconfigured device tree provides 3 or more endpoints, this will
overwrite adjacent fields in the cdn_dp_device structure.

> +	}
[ ... ]
> @@ -1052,15 +1259,29 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>  	schedule_work(&dp->event_work);
>  
>  	return 0;
> +
> +out:
> +	for (i = 0; i < MAX_PHY; i++)
> +		drm_bridge_put(dp->next_bridge_list[i]);

[Severity: High]
Can this result in a double free and refcount underflow?

If cdn_dp_bind() fails and executes this error path, it calls
drm_bridge_put() but leaves the pointers intact in dp->next_bridge_list.
If the master bind is retried later and fails again, it will perform
another drm_bridge_put() on the same stale pointers. 

The same pattern also appears below during unbind.

> +
> +	return ret;
>  }
>  
>  static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
>  {
>  	struct cdn_dp_device *dp = dev_get_drvdata(dev);
> -	struct drm_encoder *encoder = &dp->encoder.encoder;
> +	struct drm_encoder *encoder;
> +	int i;
>  
>  	cancel_work_sync(&dp->event_work);

[Severity: High]
This is a pre-existing issue, but can this lead to a use-after-free
during unbind?

Extcon notifiers are registered using devm_extcon_register_notifier().
While cancel_work_sync(&dp->event_work) cancels pending work here, the
devm-managed notifier remains active until devres cleanup, which happens
after unbind returns. 

A hotplug event in this window could reschedule dp->event_work, executing
it after the structures are freed.

> -	encoder->funcs->destroy(encoder);
> +	for (i = 0; i < dp->bridge_count; i++) {
> +		encoder = &dp->bridge_list[i]->encoder.encoder;
> +		encoder->funcs->destroy(encoder);
> +		drm_bridge_put(dp->next_bridge_list[i]);
> +	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=6

Re: [PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 7 potential issue(s) to consider:

New issues:
- [High] Stale pointers in `dp->next_bridge_list` cause a double free / refcount underflow on repeated or failed bind cycles.
- [High] `cdn_dp_switch_port` unconditionally configures video, breaking EDID reads for newly connected monitors.
- [High] Missing `atomic_check` allows simultaneous activation of multiple conflicting encoders.
- [High] `cdn_dp_connected_port` bypasses the physical lane check for extcon configurations, breaking hotplug detection.
- [High] Index mismatch between packed PHY ports and DT endpoints causes uninitialized memory reads and guaranteed NULL dereferences.
- [Medium] Device tree endpoint iteration lacks a bounds check against `MAX_PHY`, leading to a heap buffer overflow.

Pre-existing issues:
- [High] Extcon notifiers can schedule work after `cancel_work_sync()`, leading to Use-After-Free.
--

--- Patch [6]: [PATCH v5 6/6] drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection ---
commit 8377956184d44f77846e2394e562e31ea5099865
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/rockchip: cdn-dp: Add multiple bridges to support PHY port selection

This commit adds support for multiple bridges in the Rockchip CDN-DP
driver to enable PHY port selection via the DRM AUX HPD bridge framework.
It parses device tree endpoints to register one or two bridges and handles
switching the DP controller output between them based on plug states.

> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> index 74e1f5422a6e2..5e513f6930cb9 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
[ ... ]
> @@ -192,14 +193,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
>  static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
>  {
>  	struct cdn_dp_port *port;
> -	int i, lanes;
> +	int i, lanes[MAX_PHY];
>  
>  	for (i = 0; i < dp->ports; i++) {
>  		port = dp->port[i];
> -		lanes = cdn_dp_get_port_lanes(port);
> -		if (lanes)
> +		lanes[i] = cdn_dp_get_port_lanes(port);
> +		if (!dp->next_bridge_valid)
>  			return port;

[Severity: High]
Does this break hotplug detection for legacy extcon-based devices?

If dp->next_bridge_valid is false, this loop unconditionally returns
dp->port[0] on the first iteration without verifying if the physical lanes
are greater than zero. This causes the driver to perpetually report the
display as connected.

>  	}
> +
> +	if (dp->next_bridge_valid) {
> +		/* If more than one port is available, pick the last active port */
> +		if (dp->active_port >= 0 && lanes[dp->active_port])
> +			return dp->port[dp->active_port];
> +
> +		/* If the last active port is not available, pick an available port in order */
> +		for (i = 0; i < dp->bridge_count; i++) {
> +			if (lanes[i])
> +				return dp->port[i];

[Severity: High]
Can this loop read uninitialized stack memory?

The lanes array is populated in the previous loop up to dp->ports, which
tracks successfully probed PHYs. However, this loop iterates up to
dp->bridge_count, which tracks DT endpoints. If a device tree specifies
more endpoints than successfully probed PHYs, this will read out of bounds
on the stack.

> +		}
> +	}
> +
>  	return NULL;
>  }
[ ... ]
> @@ -254,12 +268,45 @@ static const struct drm_edid *
>  cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
>  {
>  	struct cdn_dp_device *dp = bridge_to_dp(bridge);
> -	const struct drm_edid *drm_edid;
> +	struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> +	struct cdn_dp_port *port = dp->port[dp_bridge->id];
> +	struct cdn_dp_port *prev_port = NULL;
> +	const struct drm_edid *drm_edid = NULL;
> +	int i, ret;
>  
>  	mutex_lock(&dp->lock);
> +
> +	/* More than one port is available */
> +	if (dp->bridge_count > 1 && !port->phy_enabled) {

[Severity: High]
Is there a risk of a NULL pointer dereference here?

If the device tree has more endpoints than successfully probed PHYs,
dp_bridge->id could exceed the bounds of initialized dp->port pointers.
In that scenario, port would be NULL, and evaluating !port->phy_enabled
will crash.

> +		for (i = 0; i < dp->bridge_count; i++) {
> +			/* Another port already enable */
> +			if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
> +				goto get_cache;
> +			/* Find already enabled port */
> +			if (dp->port[i]->phy_enabled)
> +				prev_port = dp->port[i];
> +		}
> +
> +		/* Switch to current port */
> +		if (prev_port) {
> +			ret = cdn_dp_switch_port(dp, prev_port, port);

[Severity: High]
Will this sequence fail to read the EDID for a newly connected monitor?

Switching the port here calls cdn_dp_switch_port(), which unconditionally
executes cdn_dp_config_video(dp). During EDID probing, no DRM display mode
has been committed yet, so dp->mode.clock is 0. 

This causes cdn_dp_config_video() to fail its bandwidth calculation loop
and return -EINVAL, which aborts the port switch and forces the driver to
fall back to a cached EDID.

> +			if (ret)
> +				goto get_cache;
> +		}
> +	}
[ ... ]
> @@ -838,6 +948,7 @@ static const struct drm_bridge_funcs cdn_dp_bridge_funcs = {
>  	.atomic_disable = cdn_dp_bridge_atomic_disable,
>  	.mode_valid = cdn_dp_bridge_mode_valid,
>  	.mode_set = cdn_dp_bridge_mode_set,
> +	.hpd_notify = cdn_dp_bridge_hpd_notify,
>  
>  	.dp_audio_prepare = cdn_dp_audio_prepare,

[Severity: High]
Because there is only a single DP hardware controller backing multiple
potential bridges, is there a risk of hardware state corruption if
userspace commits a state that maps CRTCs to both ports simultaneously?

Without an .atomic_check callback in cdn_dp_bridge_funcs to enforce mutual
exclusivity, cdn_dp_bridge_atomic_enable() could execute for the second
port and overwrite the video configuration while the first is active.

[ ... ]
> @@ -1030,6 +1142,101 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
[ ... ]
> +static int cdn_dp_parse_next_bridge_dt(struct cdn_dp_device *dp)
> +{
[ ... ]
> +	/* One endpoint may correspond to one next bridge. */
> +	for_each_of_graph_port_endpoint(port, dp_ep) {
> +		struct device_node *next_bridge_node __free(device_node) =
> +			of_graph_get_remote_port_parent(dp_ep);
> +
> +		bridge = of_drm_find_bridge(next_bridge_node);
> +		if (!bridge) {
> +			ret = -EPROBE_DEFER;
> +			goto out;
> +		}
> +
> +		dp->next_bridge_valid = true;
> +		dp->next_bridge_list[count] = drm_bridge_get(bridge);
> +		count++;

[Severity: Medium]
Is there a potential heap buffer overflow here?

The count variable is incremented and used as an index for
dp->next_bridge_list[count], but there is no bounds check against MAX_PHY.
If a misconfigured device tree provides 3 or more endpoints, this will
overwrite adjacent fields in the cdn_dp_device structure.

> +	}
[ ... ]
> @@ -1052,15 +1259,29 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>  	schedule_work(&dp->event_work);
>  
>  	return 0;
> +
> +out:
> +	for (i = 0; i < MAX_PHY; i++)
> +		drm_bridge_put(dp->next_bridge_list[i]);

[Severity: High]
Can this result in a double free and refcount underflow?

If cdn_dp_bind() fails and executes this error path, it calls
drm_bridge_put() but leaves the pointers intact in dp->next_bridge_list.
If the master bind is retried later and fails again, it will perform
another drm_bridge_put() on the same stale pointers. 

The same pattern also appears below during unbind.

> +
> +	return ret;
>  }
>  
>  static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
>  {
>  	struct cdn_dp_device *dp = dev_get_drvdata(dev);
> -	struct drm_encoder *encoder = &dp->encoder.encoder;
> +	struct drm_encoder *encoder;
> +	int i;
>  
>  	cancel_work_sync(&dp->event_work);

[Severity: High]
This is a pre-existing issue, but can this lead to a use-after-free
during unbind?

Extcon notifiers are registered using devm_extcon_register_notifier().
While cancel_work_sync(&dp->event_work) cancels pending work here, the
devm-managed notifier remains active until devres cleanup, which happens
after unbind returns. 

A hotplug event in this window could reschedule dp->event_work, executing
it after the structures are freed.

> -	encoder->funcs->destroy(encoder);
> +	for (i = 0; i < dp->bridge_count; i++) {
> +		encoder = &dp->bridge_list[i]->encoder.encoder;
> +		encoder->funcs->destroy(encoder);
> +		drm_bridge_put(dp->next_bridge_list[i]);
> +	}

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=6

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Re: [PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] Resource leak and duplicate bridge registration on module reload due to lifecycle mismatch.
- [High] Duplicate registration conflict with USB-C controller drivers that natively implement HPD bridges.
- [Medium] Race condition between bus notifier registration and device iteration leading to duplicate bridge registration.
--

--- Patch [1]: [PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge ---
commit 9877135b6e3e85a72f21170c14a083ad3e0308af
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/bridge: Implement generic USB Type-C DP HPD bridge

This patch implements a generic USB Type-C DP HPD bridge that monitors the
Type-C bus for devices containing the DP SVID. It automatically creates an
HPD bridge for these devices without requiring the USB-C controller driver
to implement it manually.

> diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> new file mode 100644
> index 0000000000000..43af3ea20f201
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> @@ -0,0 +1,64 @@

[ ... ]

> +static int drm_typec_bus_event(struct notifier_block *nb,
> +			       unsigned long action, void *data)
> +{
> +	struct device *dev = (struct device *)data;
> +	struct typec_altmode *alt = to_typec_altmode(dev);
> +
> +	if (action != BUS_NOTIFY_ADD_DEVICE)
> +		return NOTIFY_OK;
> +
> +	/*
> +	 * alt->dev.parent->parent : USB-C controller device
> +	 * alt->dev.parent         : USB-C connector device
> +	 */
> +	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
> +		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
> +					   to_of_node(alt->dev.parent->fwnode));

[Severity: High]
Does this unconditional registration create duplicate bridges for controller
drivers (like fusb302 or qcom_pmic_typec) that already manually allocate
their own HPD bridge for the same device node?

If the DRM subsystem binds to the generic bridge instead of the native one,
could HPD events sent by the controller via drm_aux_hpd_bridge_notify() to
its private bridge be lost?

[ ... ]

> +static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
> +{
> +	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
> +}

[Severity: High]
Does this leak resources and create duplicate bridges if the module is unloaded
and reloaded?

Since drm_dp_hpd_bridge_register() uses devm semantics tied to the USB-C
controller device (alt->dev.parent->parent) rather than this observer module,
the bridges will outlive the module. When the module is reloaded, it will
iterate the bus and unconditionally allocate a second set of duplicate bridges.

> +
> +static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
> +{
> +	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
> +	/*
> +	 * Before module initialization, some devices may have already been added.
> +         * Register the HPD bridge for these devices.
> +	 */
> +	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);

[Severity: Medium]
Is there a race condition here between registering the bus notifier and iterating
over the existing devices?

If a Type-C altmode device is added concurrently during module initialization,
could it trigger the notifier callback and also be processed by the bus iteration
loop? Since drm_dp_hpd_bridge_register() lacks deduplication logic, this TOCTOU
race might result in duplicate bridge registrations.

> +	return 0;
> +}
> +
> +module_init(drm_aux_hpd_typec_dp_bridge_module_init);
> +module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=1

Re: [PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [High] Resource leak and duplicate bridge registration on module reload due to lifecycle mismatch.
- [High] Duplicate registration conflict with USB-C controller drivers that natively implement HPD bridges.
- [Medium] Race condition between bus notifier registration and device iteration leading to duplicate bridge registration.
--

--- Patch [1]: [PATCH v5 1/6] drm/bridge: Implement generic USB Type-C DP HPD bridge ---
commit 9877135b6e3e85a72f21170c14a083ad3e0308af
Author: Chaoyi Chen <chaoyi.chen@rock-chips.com>

drm/bridge: Implement generic USB Type-C DP HPD bridge

This patch implements a generic USB Type-C DP HPD bridge that monitors the
Type-C bus for devices containing the DP SVID. It automatically creates an
HPD bridge for these devices without requiring the USB-C controller driver
to implement it manually.

> diff --git a/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> new file mode 100644
> index 0000000000000..43af3ea20f201
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/aux-hpd-typec-dp-bridge.c
> @@ -0,0 +1,64 @@

[ ... ]

> +static int drm_typec_bus_event(struct notifier_block *nb,
> +			       unsigned long action, void *data)
> +{
> +	struct device *dev = (struct device *)data;
> +	struct typec_altmode *alt = to_typec_altmode(dev);
> +
> +	if (action != BUS_NOTIFY_ADD_DEVICE)
> +		return NOTIFY_OK;
> +
> +	/*
> +	 * alt->dev.parent->parent : USB-C controller device
> +	 * alt->dev.parent         : USB-C connector device
> +	 */
> +	if (is_typec_port_altmode(&alt->dev) && alt->svid == USB_TYPEC_DP_SID)
> +		drm_dp_hpd_bridge_register(alt->dev.parent->parent,
> +					   to_of_node(alt->dev.parent->fwnode));

[Severity: High]
Does this unconditional registration create duplicate bridges for controller
drivers (like fusb302 or qcom_pmic_typec) that already manually allocate
their own HPD bridge for the same device node?

If the DRM subsystem binds to the generic bridge instead of the native one,
could HPD events sent by the controller via drm_aux_hpd_bridge_notify() to
its private bridge be lost?

[ ... ]

> +static void drm_aux_hpd_typec_dp_bridge_module_exit(void)
> +{
> +	bus_unregister_notifier(&typec_bus, &drm_typec_event_nb);
> +}

[Severity: High]
Does this leak resources and create duplicate bridges if the module is unloaded
and reloaded?

Since drm_dp_hpd_bridge_register() uses devm semantics tied to the USB-C
controller device (alt->dev.parent->parent) rather than this observer module,
the bridges will outlive the module. When the module is reloaded, it will
iterate the bus and unconditionally allocate a second set of duplicate bridges.

> +
> +static int __init drm_aux_hpd_typec_dp_bridge_module_init(void)
> +{
> +	bus_register_notifier(&typec_bus, &drm_typec_event_nb);
> +	/*
> +	 * Before module initialization, some devices may have already been added.
> +         * Register the HPD bridge for these devices.
> +	 */
> +	bus_for_each_dev(&typec_bus, NULL, NULL, check_device_already_added);

[Severity: Medium]
Is there a race condition here between registering the bus notifier and iterating
over the existing devices?

If a Type-C altmode device is added concurrently during module initialization,
could it trigger the notifier callback and also be processed by the bus iteration
loop? Since drm_dp_hpd_bridge_register() lacks deduplication logic, this TOCTOU
race might result in duplicate bridge registrations.

> +	return 0;
> +}
> +
> +module_init(drm_aux_hpd_typec_dp_bridge_module_init);
> +module_exit(drm_aux_hpd_typec_dp_bridge_module_exit);

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260730013349.51-1-kernel@airkyi.com?part=1

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy