[PATCH v6 00/12] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v6 00/12] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
@ 2026-08-25 10:47 ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Conor Dooley, Carl Lee, Rex Fu,
	Andy Chung, Peter Shen

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
Changes in v6:
- Fold the following fixes into this series: 
   - Remove redundant vhub pinctrl-names
   - Use default SPI2 memory mapping
   - Fix dt-check-style strict violations
- Move p3v3_bmc_aux node from evt1.dts to evt2.dts for dt-check-style
- Fix the patch author information
- Link to v5: https://lore.kernel.org/r/20260813-anacapa-devlop-phase-devicetree-v5-0-c7058f63dc67@gmail.com

Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders  
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com

Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com

Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (1):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

Colin Huang (5):
      dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
      ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

Peter Shen (1):
      ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors

Rex Fu (4):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
      ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
      ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
      ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    3 +
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts |  270 +++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1120 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    |  443 ++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 5 files changed, 1837 insertions(+), 1077 deletions(-)
---
base-commit: 112264fb0bd0a7982b13da18cd3e289e2ab76eed
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang <u8813345@gmail.com>


^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 00/12] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
@ 2026-08-25 10:47 ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Conor Dooley, Carl Lee, Rex Fu,
	Andy Chung, Peter Shen

This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
Changes in v6:
- Fold the following fixes into this series: 
   - Remove redundant vhub pinctrl-names
   - Use default SPI2 memory mapping
   - Fix dt-check-style strict violations
- Move p3v3_bmc_aux node from evt1.dts to evt2.dts for dt-check-style
- Fix the patch author information
- Link to v5: https://lore.kernel.org/r/20260813-anacapa-devlop-phase-devicetree-v5-0-c7058f63dc67@gmail.com

Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders  
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com

Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com

Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com

Changes in v2:
- Fix dtbs_check fail.
  Validated by following command:
    make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
    make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com

---
Andy Chung (1):
      ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC

Carl Lee (1):
      ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board

Colin Huang (5):
      dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
      ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
      ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
      ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
      ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

Peter Shen (1):
      ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors

Rex Fu (4):
      ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
      ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
      ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
      ARM: dts: aspeed: anacapa: Add SPI flash VCC supply

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    3 +
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts |  270 +++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1120 ++++++++++++++++++++
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    |  443 ++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 5 files changed, 1837 insertions(+), 1077 deletions(-)
---
base-commit: 112264fb0bd0a7982b13da18cd3e289e2ab76eed
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0

Best regards,
-- 
Colin Huang <u8813345@gmail.com>




^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 01/12] dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Conor Dooley

Document Anacapa BMC EVT1, EVT2, and DVT compatibles.

Signed-off-by: Colin Huang <u8813345@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index dd7996960de3..1c1570143bd9 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -84,6 +84,9 @@ properties:
               - asus,ast2600-kommando-ipmi-card
               - asus,x4tf-bmc
               - facebook,anacapa-bmc
+              - facebook,anacapa-bmc-dvt
+              - facebook,anacapa-bmc-evt1
+              - facebook,anacapa-bmc-evt2
               - facebook,bletchley-bmc
               - facebook,catalina-bmc
               - facebook,clemente-bmc

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 01/12] dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Conor Dooley

From: Colin Huang <u8813345@gmail.com>

Document Anacapa BMC EVT1, EVT2, and DVT compatibles.

Signed-off-by: Colin Huang <u8813345@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index dd7996960de3..1c1570143bd9 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -84,6 +84,9 @@ properties:
               - asus,ast2600-kommando-ipmi-card
               - asus,x4tf-bmc
               - facebook,anacapa-bmc
+              - facebook,anacapa-bmc-dvt
+              - facebook,anacapa-bmc-evt1
+              - facebook,anacapa-bmc-evt2
               - facebook,bletchley-bmc
               - facebook,catalina-bmc
               - facebook,clemente-bmc

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

This commit introduces an EVT1 development-phase devicetree for the
Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
the EVT1 hardware revision file.
 
A dedicated EVT1 DTS is added as the base revision for subsequent
board variants. The EVT1 devicetree is derived from the original
Anacapa devicetree and incorporates several cleanups and fixes:

  - Remove redundant vhub pinctrl-names
  - Use default SPI2 memory mapping
  - Fix dt-check-style strict violations
    Remove p3v3_bmc_aux node to fix '[unused-lable]' warning.
 
The top-level aspeed-bmc-facebook-anacapa.dts now includes the EVT1
devicetree, allowing EVT2 and DVT revisions to inherit from a common
baseline while preserving a single build target for Anacapa.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1120 ++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 2 files changed, 1121 insertions(+), 1077 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
new file mode 100644
index 000000000000..25412cadb30a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
@@ -0,0 +1,1120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	compatible = "facebook,anacapa-bmc-evt1", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+
+	aliases {
+		i2c16 = &i2c0mux0ch0;
+		i2c17 = &i2c0mux0ch1;
+		i2c18 = &i2c0mux0ch2;
+		i2c19 = &i2c0mux0ch3;
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+		i2c22 = &i2c1mux0ch2;
+		i2c23 = &i2c1mux0ch3;
+		i2c24 = &i2c4mux0ch0;
+		i2c25 = &i2c4mux0ch1;
+		i2c26 = &i2c4mux0ch2;
+		i2c27 = &i2c4mux0ch3;
+		i2c28 = &i2c4mux0ch4;
+		i2c29 = &i2c4mux0ch5;
+		i2c30 = &i2c4mux0ch6;
+		i2c31 = &i2c4mux0ch7;
+		i2c32 = &i2c8mux0ch0;
+		i2c33 = &i2c8mux0ch1;
+		i2c34 = &i2c8mux0ch2;
+		i2c35 = &i2c8mux0ch3;
+		i2c36 = &i2c10mux0ch0;
+		i2c37 = &i2c10mux0ch1;
+		i2c38 = &i2c10mux0ch2;
+		i2c39 = &i2c10mux0ch3;
+		i2c40 = &i2c10mux0ch4;
+		i2c41 = &i2c10mux0ch5;
+		i2c42 = &i2c10mux0ch6;
+		i2c43 = &i2c10mux0ch7;
+		i2c44 = &i2c11mux0ch0;
+		i2c45 = &i2c11mux0ch1;
+		i2c46 = &i2c11mux0ch2;
+		i2c47 = &i2c11mux0ch3;
+		i2c48 = &i2c11mux0ch4;
+		i2c49 = &i2c11mux0ch5;
+		i2c50 = &i2c11mux0ch6;
+		i2c51 = &i2c11mux0ch7;
+		i2c52 = &i2c13mux0ch0;
+		i2c53 = &i2c13mux0ch1;
+		i2c54 = &i2c13mux0ch2;
+		i2c55 = &i2c13mux0ch3;
+		i2c56 = &i2c13mux0ch4;
+		i2c57 = &i2c13mux0ch5;
+		i2c58 = &i2c13mux0ch6;
+		i2c59 = &i2c13mux0ch7;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			label = "bmc_heartbeat_amber";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+			label = "fp_id_amber";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			alignment = <0x01000000>;
+			reusable;
+			size = <0x01000000>;
+		};
+
+		video_engine_memory: video {
+			compatible = "shared-dma-pool";
+			alignment = <0x00100000>;
+			reusable;
+			size = <0x02c00000>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		#size-cells = <0>;
+
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		    &pinctrl_adc2_default &pinctrl_adc3_default
+		    &pinctrl_adc4_default &pinctrl_adc5_default
+		    &pinctrl_adc6_default &pinctrl_adc7_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&adc1 {
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+	};
+};
+
+&gfx {
+	memory-region = <&gfx_memory>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+
+	/*A0-A7*/
+	"","","","","","","","",
+
+	/*B0-B7*/
+	"BATTERY_DETECT", "", "", "BMC_READY",
+	"", "FM_ID_LED", "", "",
+
+	/*C0-C7*/
+	"","","","","","","","",
+
+	/*D0-D7*/
+	"","","","","","","","",
+
+	/*E0-E7*/
+	"","","","","","","","",
+
+	/*F0-F7*/
+	"","","","","","","","",
+
+	/*G0-G7*/
+	"FM_MUX1_SEL", "", "", "",
+	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
+
+	/*H0-H7*/
+	"","","","","","","","",
+
+	/*I0-I7*/
+	"", "", "", "",
+	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
+
+	/*J0-J7*/
+	"","","","","","","","",
+
+	/*K0-K7*/
+	"","","","","","","","",
+
+	/*L0-L7*/
+	"","","","","","","","",
+
+	/*M0-M7*/
+	"", "BMC_FRU_WP", "", "",
+	"", "", "", "",
+
+	/*N0-N7*/
+	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
+	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
+
+	/*O0-O7*/
+	"","","","","","","","",
+
+	/*P0-P7*/
+	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
+	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
+
+	/*Q0-Q7*/
+	"","","","","","","","",
+
+	/*R0-R7*/
+	"","","","","","","","",
+
+	/*S0-S7*/
+	"", "", "SYS_BMC_PWRBTN_N", "",
+	"", "", "", "RUN_POWER_FAULT",
+
+	/*T0-T7*/
+	"","","","","","","","",
+
+	/*U0-U7*/
+	"","","","","","","","",
+
+	/*V0-V7*/
+	"","","","","","","","",
+
+	/*W0-W7*/
+	"","","","","","","","",
+
+	/*X0-X7*/
+	"","","","","","","","",
+
+	/*Y0-Y7*/
+	"","","","","","","","",
+
+	/*Z0-Z7*/
+	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
+	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/
+	"","","","","","","","",
+
+	/*18B0-18B7*/
+	"","","","",
+	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
+	"FM_BOARD_BMC_REV_ID2", "",
+
+	/*18C0-18C7*/
+	"","","","","","","","",
+
+	/*18D0-18D7*/
+	"","","","","","","","",
+
+	/*18E0-18E3*/
+	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
+};
+
+// L Bridge Board
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// R Bridge Board
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// MB - E1.S
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// AMC
+&i2c5 {
+	status = "okay";
+};
+
+// MB
+&i2c6 {
+	status = "okay";
+
+	// HPM FRU
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+// SCM
+&i2c7 {
+	status = "okay";
+};
+
+// MB - PDB
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
+					"", "",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
+					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
+					"", "RPDB_FAN1_PRSNT_N_R",
+					"", "RPDB_FAN2_PRSNT_N_R",
+					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
+					"", "";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// R-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N","",
+					"","",
+					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
+					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
+					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
+					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
+					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// L-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// SCM
+&i2c9 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+// R Bridge Board
+&i2c10 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
+					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
+					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
+					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// R Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c10mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c11mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
+					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
+					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
+					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// L Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c11mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// Debug Card
+&i2c12 {
+	status = "okay";
+};
+
+// MB
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+		};
+
+		i2c13mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM BRD ID FRU
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+		};
+
+		i2c13mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			nfc@28 {
+				compatible = "nxp,nxp-nci-i2c";
+				reg = <0x28>;
+
+				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+// SCM
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	pinctrl-names = "default";
+	use-ncsi;
+
+	status = "okay";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/* A0-A7 line 0-15 */
+	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
+	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
+	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
+	"", "", "", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "",
+	"Channel5_leakage_EAM1", "",
+	"Channel6_leakage_CPU_DIMM", "",
+	"Channel7_leakage_EAM2", "",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "", "", "",
+	"", "", "", "",
+	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
+	"", "", "", "",
+
+	/* D0-D7 line 48-63 */
+	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
+	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
+	"", "", "", "",
+
+	/* E0-E7 line 64-79 */
+	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* F0-F7 line 80-95 */
+	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
+	"PWRGD_PVDDCR_CPU0_P0", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"PWRGD_CHEH_CPU0_FPGA", "",
+	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
+	"", "",
+
+	/* H0-H7 line 112-127 */
+	"PWRGD_P3V3", "",
+	"P12V_DDR_IP_PWRGD_R", "",
+	"P12V_DDR_AH_PWRGD_R", "",
+	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
+	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
+	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
+	"PWRGD_PVDD18_S5_P0_PG", "",
+	"PWRGD_PVDD33_S5_P0_PG", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"EAM0_CPU_MOD_PWR_GD_R", "",
+	"EAM1_CPU_MOD_PWR_GD_R", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"EAM3_CPU_MOD_PWR_GD_R", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BIRDGE_R", "",
+	"PRSNT_R_BIRDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"", "", "", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
+	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
+	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"", "", "", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "",
+	"FM_PWRGD_CPU0_PWROK", "",
+	"wS5_PWR_Ready", "",
+	"wS0_ON_N", "PWRGD_P1V0_AUX";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	memory-region = <&video_engine_memory>;
+
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	pinctrl-names = "default";
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	aspeed,ext-push-pull;
+	aspeed,external-signal;
+	aspeed,reset-type = "soc";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 1fddf3a5d138..3ae84e25dcb8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,1079 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-/dts-v1/;
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Anacapa BMC";
-	compatible = "facebook,anacapa-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		i2c16 = &i2c0mux0ch0;
-		i2c17 = &i2c0mux0ch1;
-		i2c18 = &i2c0mux0ch2;
-		i2c19 = &i2c0mux0ch3;
-		i2c20 = &i2c1mux0ch0;
-		i2c21 = &i2c1mux0ch1;
-		i2c22 = &i2c1mux0ch2;
-		i2c23 = &i2c1mux0ch3;
-		i2c24 = &i2c4mux0ch0;
-		i2c25 = &i2c4mux0ch1;
-		i2c26 = &i2c4mux0ch2;
-		i2c27 = &i2c4mux0ch3;
-		i2c28 = &i2c4mux0ch4;
-		i2c29 = &i2c4mux0ch5;
-		i2c30 = &i2c4mux0ch6;
-		i2c31 = &i2c4mux0ch7;
-		i2c32 = &i2c8mux0ch0;
-		i2c33 = &i2c8mux0ch1;
-		i2c34 = &i2c8mux0ch2;
-		i2c35 = &i2c8mux0ch3;
-		i2c36 = &i2c10mux0ch0;
-		i2c37 = &i2c10mux0ch1;
-		i2c38 = &i2c10mux0ch2;
-		i2c39 = &i2c10mux0ch3;
-		i2c40 = &i2c10mux0ch4;
-		i2c41 = &i2c10mux0ch5;
-		i2c42 = &i2c10mux0ch6;
-		i2c43 = &i2c10mux0ch7;
-		i2c44 = &i2c11mux0ch0;
-		i2c45 = &i2c11mux0ch1;
-		i2c46 = &i2c11mux0ch2;
-		i2c47 = &i2c11mux0ch3;
-		i2c48 = &i2c11mux0ch4;
-		i2c49 = &i2c11mux0ch5;
-		i2c50 = &i2c11mux0ch6;
-		i2c51 = &i2c11mux0ch7;
-		i2c52 = &i2c13mux0ch0;
-		i2c53 = &i2c13mux0ch1;
-		i2c54 = &i2c13mux0ch2;
-		i2c55 = &i2c13mux0ch3;
-		i2c56 = &i2c13mux0ch4;
-		i2c57 = &i2c13mux0ch5;
-		i2c58 = &i2c13mux0ch6;
-		i2c59 = &i2c13mux0ch7;
-	};
-
-	chosen {
-		stdout-path = "serial4:57600n8";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-				  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-				  <&adc1 2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "bmc_heartbeat_amber";
-			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "fp_id_amber";
-			default-state = "off";
-			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: video {
-			size = <0x02c00000>;
-			alignment = <0x00100000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_bmc_aux";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spi_gpio: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		status = "okay";
-
-		tpm@0 {
-			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&adc0 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-	status = "okay";
-};
-
-&adc1 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc10_default>;
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&gpio0 {
-	gpio-line-names =
-
-	/*A0-A7*/
-	"","","","","","","","",
-
-	/*B0-B7*/
-	"BATTERY_DETECT", "", "", "BMC_READY",
-	"", "FM_ID_LED", "", "",
-
-	/*C0-C7*/
-	"","","","","","","","",
-
-	/*D0-D7*/
-	"","","","","","","","",
-
-	/*E0-E7*/
-	"","","","","","","","",
-
-	/*F0-F7*/
-	"","","","","","","","",
-
-	/*G0-G7*/
-	"FM_MUX1_SEL", "", "", "",
-	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
-
-	/*H0-H7*/
-	"","","","","","","","",
-
-	/*I0-I7*/
-	"", "", "", "",
-	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
-
-	/*J0-J7*/
-	"","","","","","","","",
-
-	/*K0-K7*/
-	"","","","","","","","",
-
-	/*L0-L7*/
-	"","","","","","","","",
-
-	/*M0-M7*/
-	"", "BMC_FRU_WP", "", "",
-	"", "", "", "",
-
-	/*N0-N7*/
-	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
-	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
-
-	/*O0-O7*/
-	"","","","","","","","",
-
-	/*P0-P7*/
-	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
-	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
-
-	/*Q0-Q7*/
-	"","","","","","","","",
-
-	/*R0-R7*/
-	"","","","","","","","",
-
-	/*S0-S7*/
-	"", "", "SYS_BMC_PWRBTN_N", "",
-	"", "", "", "RUN_POWER_FAULT",
-
-	/*T0-T7*/
-	"","","","","","","","",
-
-	/*U0-U7*/
-	"","","","","","","","",
-
-	/*V0-V7*/
-	"","","","","","","","",
-
-	/*W0-W7*/
-	"","","","","","","","",
-
-	/*X0-X7*/
-	"","","","","","","","",
-
-	/*Y0-Y7*/
-	"","","","","","","","",
-
-	/*Z0-Z7*/
-	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
-	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*18A0-18A7*/
-	"","","","","","","","",
-
-	/*18B0-18B7*/
-	"","","","",
-	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
-	"FM_BOARD_BMC_REV_ID2", "",
-
-	/*18C0-18C7*/
-	"","","","","","","","",
-
-	/*18D0-18D7*/
-	"","","","","","","","",
-
-	/*18E0-18E3*/
-	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
-};
-
-// L Bridge Board
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c0mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// R Bridge Board
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c1mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// MB - E1.S
-&i2c4 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// AMC
-&i2c5 {
-	status = "okay";
-};
-
-// MB
-&i2c6 {
-	status = "okay";
-
-	// HPM FRU
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-// SCM
-&i2c7 {
-	status = "okay";
-
-
-};
-
-// MB - PDB
-&i2c8 {
-	status = "okay";
-
-	i2c-mux@72 {
-		compatible = "nxp,pca9546";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c8mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
-					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
-					"", "",
-					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
-					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
-					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
-					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
-					"RPDB_PGD_P3V3_STBY_PWRGD_R",
-					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
-					"RPDB_PWRGD_P50V_HSC4_SYS_R",
-					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
-					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
-					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
-					"", "RPDB_FAN1_PRSNT_N_R",
-					"", "RPDB_FAN2_PRSNT_N_R",
-					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
-					"", "";
-			};
-
-			// R-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
-					"LPDB_FAN_CT_FAN_FAIL_R_N","",
-					"","",
-					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
-					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
-					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
-					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
-					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
-					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
-					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
-					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
-					"","",
-					"","",
-					"","";
-			};
-
-			// L-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c8mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// SCM
-&i2c9 {
-	status = "okay";
-
-	// SCM FRU
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	// BSM FRU
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-	};
-};
-
-// R Bridge Board
-&i2c10 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c10mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
-					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
-					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
-					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// R Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c10mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// L Bridge Board
-&i2c11 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
-					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
-					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
-					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// L Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c11mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// Debug Card
-&i2c12 {
-	status = "okay";
-};
-
-// MB
-&i2c13 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c13mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-		};
-		i2c13mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			// HPM BRD ID FRU
-			eeprom@51 {
-				compatible = "atmel,24c256";
-				reg = <0x51>;
-			};
-		};
-		i2c13mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			nfc@28 {
-				compatible = "nxp,nxp-nci-i2c";
-				reg = <0x28>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
-
-				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-};
-
-// SCM
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&kcs2 {
-	aspeed,lpc-io-reg = <0xca8>;
-	status = "okay";
-};
-
-&kcs3 {
-	aspeed,lpc-io-reg = <0xca2>;
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ncsi3_default>;
-	use-ncsi;
-};
-
-&sgpiom0 {
-	ngpios = <128>;
-	bus-frequency = <2000000>;
-	gpio-line-names =
-	/*in - out - in - out */
-	/* A0-A7 line 0-15 */
-	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
-	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
-	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
-	"", "", "", "",
-
-	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "",
-	"Channel5_leakage_EAM1", "",
-	"Channel6_leakage_CPU_DIMM", "",
-	"Channel7_leakage_EAM2", "",
-
-	/* C0-C7 line 32-47 */
-	"RSVD_RMC_GPIO3", "", "", "",
-	"", "", "", "",
-	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
-	"", "", "", "",
-
-	/* D0-D7 line 48-63 */
-	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
-	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
-	"", "", "", "",
-
-	/* E0-E7 line 64-79 */
-	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* F0-F7 line 80-95 */
-	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
-	"PWRGD_PVDDCR_CPU0_P0", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* G0-G7 line 96-111 */
-	"L_PRSNT_EDSFF0_N", "",
-	"L_PRSNT_EDSFF1_N", "",
-	"R_PRSNT_EDSFF2_N", "",
-	"R_PRSNT_EDSFF3_N", "",
-	"HPM_EDSFF_PG", "",
-	"PWRGD_CHEH_CPU0_FPGA", "",
-	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
-	"", "",
-
-	/* H0-H7 line 112-127 */
-	"PWRGD_P3V3", "",
-	"P12V_DDR_IP_PWRGD_R", "",
-	"P12V_DDR_AH_PWRGD_R", "",
-	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
-	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
-	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
-	"PWRGD_PVDD18_S5_P0_PG", "",
-	"PWRGD_PVDD33_S5_P0_PG", "",
-
-	/* I0-I7 line 128-143 */
-	"EAM0_BRD_PRSNT_R_L", "",
-	"EAM1_BRD_PRSNT_R_L", "",
-	"EAM2_BRD_PRSNT_R_L", "",
-	"EAM3_BRD_PRSNT_R_L", "",
-	"EAM0_CPU_MOD_PWR_GD_R", "",
-	"EAM1_CPU_MOD_PWR_GD_R", "",
-	"PRSNT_EDSFF_BOOT_N", "",
-	"EAM3_CPU_MOD_PWR_GD_R", "",
-
-	/* J0-J7 line 144-159 */
-	"PRSNT_L_BIRDGE_R", "",
-	"PRSNT_R_BIRDGE_R", "",
-	"BRIDGE_L_MAIN_PG_R", "",
-	"BRIDGE_R_MAIN_PG_R", "",
-	"BRIDGE_L_STBY_PG_R", "",
-	"BRIDGE_R_STBY_PG_R", "",
-	"", "", "", "",
-
-	/* K0-K7 line 160-175 */
-	"ADC_I2C_ALERT_N", "",
-	"TEMP_I2C_ALERT_R_L", "",
-	"CPU0_VR_SMB_ALERT_CPLD_N", "",
-	"COVER_INTRUDER_R_N", "",
-	"HANDLE_INTRUDER_CPLD_N", "",
-	"IRQ_MCIO_CPLD_WAKE_R_N", "",
-	"APML_CPU0_ALERT_R_N", "",
-	"PDB_ALERT_R_N", "",
-
-	/* L0-L7 line 176-191 */
-	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
-	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
-	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
-	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
-
-	/* M0-M7 line 192-207 */
-	"EAM0_SMERR_CPLD_R_L", "",
-	"EAM1_SMERR_CPLD_R_L", "",
-	"EAM2_SMERR_CPLD_R_L", "",
-	"EAM3_SMERR_CPLD_R_L", "",
-	"CPU0_SMERR_N_R", "",
-	"CPU0_NV_SAVE_N_R", "",
-	"PDB_PWR_LOSS_CPLD_N", "",
-	"IRQ_BMC_SMI_ACTIVE_R_N", "",
-
-	/* N0-N7 line 208-223 */
-	"AMCROT_BMC_S5_RDY_R", "",
-	"AMC_RDY_R", "",
-	"AMC_STBY_PGOOD_R", "",
-	"CPU_AMC_SLP_S5_R_L", "",
-	"AMC_CPU_EAMPG_R", "",
-	"", "", "", "",
-
-	/* O0-O7 line 224-239 */
-	"HPM_PWR_FAIL", "Port80_b0",
-	"FM_DIMM_IP_FAIL", "Port80_b1",
-	"FM_DIMM_AH_FAIL", "Port80_b2",
-	"AMC_THERMTRIP_ASSERT", "Port80_b3",
-	"CPU_THERMTRIP_ASSERT", "Port80_b4",
-	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
-	"CPLD_SGPIO_RDY", "Port80_b6",
-	"", "Port80_b7",
-
-	/* P0-P7 line 240-255 */
-	"CPU0_SLP_S5_N_R", "NFC_VEN",
-	"CPU0_SLP_S3_N_R", "",
-	"FM_CPU0_PWRGD", "",
-	"PWRGD_RMC", "",
-	"FM_RST_CPU0_RESET_N", "",
-	"FM_PWRGD_CPU0_PWROK", "",
-	"wS5_PWR_Ready", "",
-	"wS0_ON_N", "PWRGD_P1V0_AUX";
-	status = "okay";
-};
-
-// BIOS Flash
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default>;
-	status = "okay";
-	reg = <0x1e631000 0xc4>, <0x50000000 0x8000000>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		label = "pnor";
-		spi-max-frequency = <12000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		status = "okay";
-	};
-};
-
-// HOST BIOS Debug
-&uart1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-// BMC Debug Console
-&uart5 {
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-	pinctrl-names = "default";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&wdt1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-	status = "okay";
-};
+#include "aspeed-bmc-facebook-anacapa-evt1.dts"

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

From: Colin Huang <u8813345@gmail.com>

This commit introduces an EVT1 development-phase devicetree for the
Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
the EVT1 hardware revision file.
 
A dedicated EVT1 DTS is added as the base revision for subsequent
board variants. The EVT1 devicetree is derived from the original
Anacapa devicetree and incorporates several cleanups and fixes:

  - Remove redundant vhub pinctrl-names
  - Use default SPI2 memory mapping
  - Fix dt-check-style strict violations
    Remove p3v3_bmc_aux node to fix '[unused-lable]' warning.
 
The top-level aspeed-bmc-facebook-anacapa.dts now includes the EVT1
devicetree, allowing EVT2 and DVT revisions to inherit from a common
baseline while preserving a single build target for Anacapa.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt1.dts    | 1120 ++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     | 1078 +------------------
 2 files changed, 1121 insertions(+), 1077 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
new file mode 100644
index 000000000000..25412cadb30a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
@@ -0,0 +1,1120 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	compatible = "facebook,anacapa-bmc-evt1", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+
+	aliases {
+		i2c16 = &i2c0mux0ch0;
+		i2c17 = &i2c0mux0ch1;
+		i2c18 = &i2c0mux0ch2;
+		i2c19 = &i2c0mux0ch3;
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+		i2c22 = &i2c1mux0ch2;
+		i2c23 = &i2c1mux0ch3;
+		i2c24 = &i2c4mux0ch0;
+		i2c25 = &i2c4mux0ch1;
+		i2c26 = &i2c4mux0ch2;
+		i2c27 = &i2c4mux0ch3;
+		i2c28 = &i2c4mux0ch4;
+		i2c29 = &i2c4mux0ch5;
+		i2c30 = &i2c4mux0ch6;
+		i2c31 = &i2c4mux0ch7;
+		i2c32 = &i2c8mux0ch0;
+		i2c33 = &i2c8mux0ch1;
+		i2c34 = &i2c8mux0ch2;
+		i2c35 = &i2c8mux0ch3;
+		i2c36 = &i2c10mux0ch0;
+		i2c37 = &i2c10mux0ch1;
+		i2c38 = &i2c10mux0ch2;
+		i2c39 = &i2c10mux0ch3;
+		i2c40 = &i2c10mux0ch4;
+		i2c41 = &i2c10mux0ch5;
+		i2c42 = &i2c10mux0ch6;
+		i2c43 = &i2c10mux0ch7;
+		i2c44 = &i2c11mux0ch0;
+		i2c45 = &i2c11mux0ch1;
+		i2c46 = &i2c11mux0ch2;
+		i2c47 = &i2c11mux0ch3;
+		i2c48 = &i2c11mux0ch4;
+		i2c49 = &i2c11mux0ch5;
+		i2c50 = &i2c11mux0ch6;
+		i2c51 = &i2c11mux0ch7;
+		i2c52 = &i2c13mux0ch0;
+		i2c53 = &i2c13mux0ch1;
+		i2c54 = &i2c13mux0ch2;
+		i2c55 = &i2c13mux0ch3;
+		i2c56 = &i2c13mux0ch4;
+		i2c57 = &i2c13mux0ch5;
+		i2c58 = &i2c13mux0ch6;
+		i2c59 = &i2c13mux0ch7;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			label = "bmc_heartbeat_amber";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+			label = "fp_id_amber";
+		};
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x80000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gfx_memory: framebuffer {
+			compatible = "shared-dma-pool";
+			alignment = <0x01000000>;
+			reusable;
+			size = <0x01000000>;
+		};
+
+		video_engine_memory: video {
+			compatible = "shared-dma-pool";
+			alignment = <0x00100000>;
+			reusable;
+			size = <0x02c00000>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		#size-cells = <0>;
+
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&adc0 {
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		    &pinctrl_adc2_default &pinctrl_adc3_default
+		    &pinctrl_adc4_default &pinctrl_adc5_default
+		    &pinctrl_adc6_default &pinctrl_adc7_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&adc1 {
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	pinctrl-names = "default";
+	aspeed,int-vref-microvolt = <2500000>;
+
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		status = "okay";
+	};
+};
+
+&gfx {
+	memory-region = <&gfx_memory>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+
+	/*A0-A7*/
+	"","","","","","","","",
+
+	/*B0-B7*/
+	"BATTERY_DETECT", "", "", "BMC_READY",
+	"", "FM_ID_LED", "", "",
+
+	/*C0-C7*/
+	"","","","","","","","",
+
+	/*D0-D7*/
+	"","","","","","","","",
+
+	/*E0-E7*/
+	"","","","","","","","",
+
+	/*F0-F7*/
+	"","","","","","","","",
+
+	/*G0-G7*/
+	"FM_MUX1_SEL", "", "", "",
+	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
+
+	/*H0-H7*/
+	"","","","","","","","",
+
+	/*I0-I7*/
+	"", "", "", "",
+	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
+
+	/*J0-J7*/
+	"","","","","","","","",
+
+	/*K0-K7*/
+	"","","","","","","","",
+
+	/*L0-L7*/
+	"","","","","","","","",
+
+	/*M0-M7*/
+	"", "BMC_FRU_WP", "", "",
+	"", "", "", "",
+
+	/*N0-N7*/
+	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
+	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
+
+	/*O0-O7*/
+	"","","","","","","","",
+
+	/*P0-P7*/
+	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
+	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
+
+	/*Q0-Q7*/
+	"","","","","","","","",
+
+	/*R0-R7*/
+	"","","","","","","","",
+
+	/*S0-S7*/
+	"", "", "SYS_BMC_PWRBTN_N", "",
+	"", "", "", "RUN_POWER_FAULT",
+
+	/*T0-T7*/
+	"","","","","","","","",
+
+	/*U0-U7*/
+	"","","","","","","","",
+
+	/*V0-V7*/
+	"","","","","","","","",
+
+	/*W0-W7*/
+	"","","","","","","","",
+
+	/*X0-X7*/
+	"","","","","","","","",
+
+	/*Y0-Y7*/
+	"","","","","","","","",
+
+	/*Z0-Z7*/
+	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
+	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/
+	"","","","","","","","",
+
+	/*18B0-18B7*/
+	"","","","",
+	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
+	"FM_BOARD_BMC_REV_ID2", "",
+
+	/*18C0-18C7*/
+	"","","","","","","","",
+
+	/*18D0-18D7*/
+	"","","","","","","","",
+
+	/*18E0-18E3*/
+	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
+};
+
+// L Bridge Board
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// R Bridge Board
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// MB - E1.S
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// AMC
+&i2c5 {
+	status = "okay";
+};
+
+// MB
+&i2c6 {
+	status = "okay";
+
+	// HPM FRU
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+// SCM
+&i2c7 {
+	status = "okay";
+};
+
+// MB - PDB
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c8mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
+					"", "",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
+					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
+					"", "RPDB_FAN1_PRSNT_N_R",
+					"", "RPDB_FAN2_PRSNT_N_R",
+					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
+					"", "";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// R-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N","",
+					"","",
+					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9555";
+				reg = <0x24>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
+					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
+					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
+					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
+					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+
+			// L-PDB FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+
+		i2c8mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// SCM
+&i2c9 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+// R Bridge Board
+&i2c10 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c10mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
+					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
+					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
+					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// R Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c10mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c10mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c11mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@22 {
+				compatible = "nxp,pca9555";
+				reg = <0x22>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"","",
+					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
+					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
+					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
+					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
+					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
+					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
+					"","";
+			};
+
+			// L Bridge Board FRU
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+			};
+		};
+
+		i2c11mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c11mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+// Debug Card
+&i2c12 {
+	status = "okay";
+};
+
+// MB
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		i2c-mux-idle-disconnect;
+		#size-cells = <0>;
+
+		i2c13mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+		};
+
+		i2c13mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM BRD ID FRU
+			eeprom@51 {
+				compatible = "atmel,24c256";
+				reg = <0x51>;
+			};
+		};
+
+		i2c13mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c13mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			nfc@28 {
+				compatible = "nxp,nxp-nci-i2c";
+				reg = <0x28>;
+
+				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&sgpiom0>;
+
+				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+// SCM
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	pinctrl-names = "default";
+	use-ncsi;
+
+	status = "okay";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/* A0-A7 line 0-15 */
+	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
+	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
+	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
+	"", "", "", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "",
+	"Channel5_leakage_EAM1", "",
+	"Channel6_leakage_CPU_DIMM", "",
+	"Channel7_leakage_EAM2", "",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "", "", "",
+	"", "", "", "",
+	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
+	"", "", "", "",
+
+	/* D0-D7 line 48-63 */
+	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
+	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
+	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
+	"", "", "", "",
+
+	/* E0-E7 line 64-79 */
+	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
+	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* F0-F7 line 80-95 */
+	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
+	"PWRGD_PVDDCR_CPU0_P0", "",
+	"", "", "", "",
+	"", "", "", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"PWRGD_CHEH_CPU0_FPGA", "",
+	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
+	"", "",
+
+	/* H0-H7 line 112-127 */
+	"PWRGD_P3V3", "",
+	"P12V_DDR_IP_PWRGD_R", "",
+	"P12V_DDR_AH_PWRGD_R", "",
+	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
+	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
+	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
+	"PWRGD_PVDD18_S5_P0_PG", "",
+	"PWRGD_PVDD33_S5_P0_PG", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"EAM0_CPU_MOD_PWR_GD_R", "",
+	"EAM1_CPU_MOD_PWR_GD_R", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"EAM3_CPU_MOD_PWR_GD_R", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BIRDGE_R", "",
+	"PRSNT_R_BIRDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"", "", "", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
+	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
+	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"", "", "", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "",
+	"FM_PWRGD_CPU0_PWROK", "",
+	"wS5_PWR_Ready", "",
+	"wS0_ON_N", "PWRGD_P1V0_AUX";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-rx-bus-width = <2>;
+		spi-tx-bus-width = <2>;
+
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	memory-region = <&video_engine_memory>;
+
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	pinctrl-names = "default";
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	aspeed,ext-push-pull;
+	aspeed,external-signal;
+	aspeed,reset-type = "soc";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 1fddf3a5d138..3ae84e25dcb8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,1079 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-/dts-v1/;
-#include "aspeed-g6.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/i2c/i2c.h>
-
-/ {
-	model = "Facebook Anacapa BMC";
-	compatible = "facebook,anacapa-bmc", "aspeed,ast2600";
-
-	aliases {
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		i2c16 = &i2c0mux0ch0;
-		i2c17 = &i2c0mux0ch1;
-		i2c18 = &i2c0mux0ch2;
-		i2c19 = &i2c0mux0ch3;
-		i2c20 = &i2c1mux0ch0;
-		i2c21 = &i2c1mux0ch1;
-		i2c22 = &i2c1mux0ch2;
-		i2c23 = &i2c1mux0ch3;
-		i2c24 = &i2c4mux0ch0;
-		i2c25 = &i2c4mux0ch1;
-		i2c26 = &i2c4mux0ch2;
-		i2c27 = &i2c4mux0ch3;
-		i2c28 = &i2c4mux0ch4;
-		i2c29 = &i2c4mux0ch5;
-		i2c30 = &i2c4mux0ch6;
-		i2c31 = &i2c4mux0ch7;
-		i2c32 = &i2c8mux0ch0;
-		i2c33 = &i2c8mux0ch1;
-		i2c34 = &i2c8mux0ch2;
-		i2c35 = &i2c8mux0ch3;
-		i2c36 = &i2c10mux0ch0;
-		i2c37 = &i2c10mux0ch1;
-		i2c38 = &i2c10mux0ch2;
-		i2c39 = &i2c10mux0ch3;
-		i2c40 = &i2c10mux0ch4;
-		i2c41 = &i2c10mux0ch5;
-		i2c42 = &i2c10mux0ch6;
-		i2c43 = &i2c10mux0ch7;
-		i2c44 = &i2c11mux0ch0;
-		i2c45 = &i2c11mux0ch1;
-		i2c46 = &i2c11mux0ch2;
-		i2c47 = &i2c11mux0ch3;
-		i2c48 = &i2c11mux0ch4;
-		i2c49 = &i2c11mux0ch5;
-		i2c50 = &i2c11mux0ch6;
-		i2c51 = &i2c11mux0ch7;
-		i2c52 = &i2c13mux0ch0;
-		i2c53 = &i2c13mux0ch1;
-		i2c54 = &i2c13mux0ch2;
-		i2c55 = &i2c13mux0ch3;
-		i2c56 = &i2c13mux0ch4;
-		i2c57 = &i2c13mux0ch5;
-		i2c58 = &i2c13mux0ch6;
-		i2c59 = &i2c13mux0ch7;
-	};
-
-	chosen {
-		stdout-path = "serial4:57600n8";
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
-				  <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
-				  <&adc1 2>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "bmc_heartbeat_amber";
-			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-1 {
-			label = "fp_id_amber";
-			default-state = "off";
-			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		video_engine_memory: video {
-			size = <0x02c00000>;
-			alignment = <0x00100000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_bmc_aux";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	spi_gpio: spi {
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-		num-chipselects = <1>;
-		status = "okay";
-
-		tpm@0 {
-			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
-};
-
-&adc0 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
-		&pinctrl_adc2_default &pinctrl_adc3_default
-		&pinctrl_adc4_default &pinctrl_adc5_default
-		&pinctrl_adc6_default &pinctrl_adc7_default>;
-	status = "okay";
-};
-
-&adc1 {
-	aspeed,int-vref-microvolt = <2500000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc10_default>;
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&gpio0 {
-	gpio-line-names =
-
-	/*A0-A7*/
-	"","","","","","","","",
-
-	/*B0-B7*/
-	"BATTERY_DETECT", "", "", "BMC_READY",
-	"", "FM_ID_LED", "", "",
-
-	/*C0-C7*/
-	"","","","","","","","",
-
-	/*D0-D7*/
-	"","","","","","","","",
-
-	/*E0-E7*/
-	"","","","","","","","",
-
-	/*F0-F7*/
-	"","","","","","","","",
-
-	/*G0-G7*/
-	"FM_MUX1_SEL", "", "", "",
-	"", "", "FM_DEBUG_PORT_PRSNT_N", "FM_BMC_DBP_PRESENT_N",
-
-	/*H0-H7*/
-	"","","","","","","","",
-
-	/*I0-I7*/
-	"", "", "", "",
-	"", "FLASH_WP_STATUS", "BMC_JTAG_MUX_SEL", "",
-
-	/*J0-J7*/
-	"","","","","","","","",
-
-	/*K0-K7*/
-	"","","","","","","","",
-
-	/*L0-L7*/
-	"","","","","","","","",
-
-	/*M0-M7*/
-	"", "BMC_FRU_WP", "", "",
-	"", "", "", "",
-
-	/*N0-N7*/
-	"LED_POSTCODE_0", "LED_POSTCODE_1", "LED_POSTCODE_2", "LED_POSTCODE_3",
-	"LED_POSTCODE_4", "LED_POSTCODE_5", "LED_POSTCODE_6", "LED_POSTCODE_7",
-
-	/*O0-O7*/
-	"","","","","","","","",
-
-	/*P0-P7*/
-	"PWR_BTN_BMC_BUF_N", "", "ID_RST_BTN_BMC_N", "",
-	"PWR_LED", "", "", "BMC_HEARTBEAT_N",
-
-	/*Q0-Q7*/
-	"","","","","","","","",
-
-	/*R0-R7*/
-	"","","","","","","","",
-
-	/*S0-S7*/
-	"", "", "SYS_BMC_PWRBTN_N", "",
-	"", "", "", "RUN_POWER_FAULT",
-
-	/*T0-T7*/
-	"","","","","","","","",
-
-	/*U0-U7*/
-	"","","","","","","","",
-
-	/*V0-V7*/
-	"","","","","","","","",
-
-	/*W0-W7*/
-	"","","","","","","","",
-
-	/*X0-X7*/
-	"","","","","","","","",
-
-	/*Y0-Y7*/
-	"","","","","","","","",
-
-	/*Z0-Z7*/
-	"SPI_BMC_TPM_CS2_N", "", "", "SPI_BMC_TPM_CLK",
-	"SPI_BMC_TPM_MOSI", "SPI_BMC_TPM_MISO", "", "";
-};
-
-&gpio1 {
-	gpio-line-names =
-	/*18A0-18A7*/
-	"","","","","","","","",
-
-	/*18B0-18B7*/
-	"","","","",
-	"FM_BOARD_BMC_REV_ID0", "FM_BOARD_BMC_REV_ID1",
-	"FM_BOARD_BMC_REV_ID2", "",
-
-	/*18C0-18C7*/
-	"","","","","","","","",
-
-	/*18D0-18D7*/
-	"","","","","","","","",
-
-	/*18E0-18E3*/
-	"FM_BMC_PROT_LS_EN", "AC_PWR_BMC_BTN_N", "", "";
-};
-
-// L Bridge Board
-&i2c0 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c0mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c0mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// R Bridge Board
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c2048";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9546";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c1mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c1mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// MB - E1.S
-&i2c4 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c4mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c4mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// AMC
-&i2c5 {
-	status = "okay";
-};
-
-// MB
-&i2c6 {
-	status = "okay";
-
-	// HPM FRU
-	eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-// SCM
-&i2c7 {
-	status = "okay";
-
-
-};
-
-// MB - PDB
-&i2c8 {
-	status = "okay";
-
-	i2c-mux@72 {
-		compatible = "nxp,pca9546";
-		reg = <0x72>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c8mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
-					"RPDB_FAN_CT_FAN_FAIL_R_N", "",
-					"", "",
-					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
-					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
-					"RPDB_I2C_P12V_MB_VRM_ALERT_R_N",
-					"RPDB_I2C_P12V_STBY_VRM_ALERT_R_N",
-					"RPDB_PGD_P3V3_STBY_PWRGD_R",
-					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
-					"RPDB_PWRGD_P50V_HSC4_SYS_R",
-					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
-					"RPDB_P50V_FAN1_R2_PG", "RPDB_P50V_FAN2_R2_PG",
-					"RPDB_P50V_FAN3_R2_PG", "RPDB_P50V_FAN4_R2_PG",
-					"", "RPDB_FAN1_PRSNT_N_R",
-					"", "RPDB_FAN2_PRSNT_N_R",
-					"RPDB_FAN3_PRSNT_N_R", "RPDB_FAN4_PRSNT_N_R",
-					"", "";
-			};
-
-			// R-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_FAN_FULL_SPEED_R_N","LPDB_I2C_TEMP75_U8_ALERT_R_N",
-					"LPDB_I2C_TMP432_U29_ALERT_R_N","LPDB_GLOBAL_WP",
-					"LPDB_FAN_CT_FAN_FAIL_R_N","",
-					"","",
-					"LPDB_ALERT_P50V_HSC0_R_N","LPDB_ALERT_P50V_HSC1_R_N",
-					"LPDB_ALERT_P50V_HSC5_R_N","LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
-					"LPDB_EAM0_PRSNT_MOS_N_R","LPDB_EAM1_PRSNT_MOS_N_R",
-					"LPDB_PWRGD_P50V_HSC5_SYS_R","";
-			};
-
-			gpio@24 {
-				compatible = "nxp,pca9555";
-				reg = <0x24>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-line-names =
-					"LPDB_P50V_FAN1_R2_PG","LPDB_P50V_FAN2_R2_PG",
-					"LPDB_P50V_FAN3_R2_PG","LPDB_P50V_FAN4_R2_PG",
-					"LPDB_P50V_FAN5_R2_PG","LPDB_FAN1_PRSNT_N_R",
-					"LPDB_FAN2_PRSNT_N_R","LPDB_FAN3_PRSNT_N_R",
-					"LPDB_FAN4_PRSNT_N_R","LPDB_FAN5_PRSNT_N_R",
-					"","",
-					"","",
-					"","";
-			};
-
-			// L-PDB FRU
-			eeprom@50 {
-				compatible = "atmel,24c128";
-				reg = <0x50>;
-			};
-		};
-		i2c8mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c8mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// SCM
-&i2c9 {
-	status = "okay";
-
-	// SCM FRU
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-	};
-
-	// BSM FRU
-	eeprom@56 {
-		compatible = "atmel,24c64";
-		reg = <0x56>;
-	};
-};
-
-// R Bridge Board
-&i2c10 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c10mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","RBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"RBB_EAM0_NIC_CBL_PRSNT_R_L","RBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"RBB_AINIC_JTAG_MUX_R2_SEL","RBB_SPI_MUX0_R2_SEL",
-					"RBB_AINIC_PRSNT_R_L","RBB_AINIC_OE_R_N",
-					"RBB_AINIC_BOARD_R2_ID","RBB_RST_USB2_HUB_R_N",
-					"RBB_RST_FT4222_R_N","RBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// R Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c10mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c10mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// L Bridge Board
-&i2c11 {
-	status = "okay";
-
-	i2c-mux@71 {
-		compatible = "nxp,pca9548";
-		reg = <0x71>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c11mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@22 {
-				compatible = "nxp,pca9555";
-				reg = <0x22>;
-				gpio-controller;
-				#gpio-cells = <2>;
-
-				gpio-line-names =
-					"","",
-					"","LBB_CPLD_REFRESH_IN_PRGRS_R_L",
-					"LBB_EAM0_NIC_CBL_PRSNT_R_L","LBB_EAM1_NIC_CBL_PRSNT_R_L",
-					"LBB_AINIC_JTAG_MUX_R2_SEL","LBB_SPI_MUX0_R2_SEL",
-					"LBB_AINIC_PRSNT_R_L","LBB_AINIC_OE_R_N",
-					"LBB_AINIC_BOARD_R2_ID","LBB_RST_USB2_HUB_R_N",
-					"LBB_RST_FT4222_R_N","LBB_RST_MCP2210_R_N",
-					"","";
-			};
-
-			// L Bridge Board FRU
-			eeprom@52 {
-				compatible = "atmel,24c256";
-				reg = <0x52>;
-			};
-		};
-		i2c11mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c11mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-// Debug Card
-&i2c12 {
-	status = "okay";
-};
-
-// MB
-&i2c13 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		reg = <0x70>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-mux-idle-disconnect;
-
-		i2c13mux0ch0: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch1: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch2: i2c@2 {
-			reg = <2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch3: i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			adc@1f {
-				compatible = "ti,adc128d818";
-				reg = <0x1f>;
-				ti,mode = /bits/ 8 <1>;
-			};
-		};
-		i2c13mux0ch4: i2c@4 {
-			reg = <4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			// HPM BRD ID FRU
-			eeprom@51 {
-				compatible = "atmel,24c256";
-				reg = <0x51>;
-			};
-		};
-		i2c13mux0ch5: i2c@5 {
-			reg = <5>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch6: i2c@6 {
-			reg = <6>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-		i2c13mux0ch7: i2c@7 {
-			reg = <7>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			nfc@28 {
-				compatible = "nxp,nxp-nci-i2c";
-				reg = <0x28>;
-
-				interrupt-parent = <&sgpiom0>;
-				interrupts = <156 IRQ_TYPE_LEVEL_HIGH>;
-
-				enable-gpios = <&sgpiom0 241 GPIO_ACTIVE_HIGH>;
-			};
-		};
-	};
-};
-
-// SCM
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&kcs2 {
-	aspeed,lpc-io-reg = <0xca8>;
-	status = "okay";
-};
-
-&kcs3 {
-	aspeed,lpc-io-reg = <0xca2>;
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-};
-
-&mac2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ncsi3_default>;
-	use-ncsi;
-};
-
-&sgpiom0 {
-	ngpios = <128>;
-	bus-frequency = <2000000>;
-	gpio-line-names =
-	/*in - out - in - out */
-	/* A0-A7 line 0-15 */
-	"", "FM_CPU0_SYS_RESET_N", "", "CPU0_KBRST_N",
-	"", "FM_CPU0_PROCHOT_trigger_N", "", "FM_CLR_CMOS_R_P0",
-	"", "Force_I3C_SEL", "", "SYSTEM_Force_Run_AC_Cycle",
-	"", "", "", "",
-
-	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel3_leakage", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "",
-	"Channel5_leakage_EAM1", "",
-	"Channel6_leakage_CPU_DIMM", "",
-	"Channel7_leakage_EAM2", "",
-
-	/* C0-C7 line 32-47 */
-	"RSVD_RMC_GPIO3", "", "", "",
-	"", "", "", "",
-	"LEAK_DETECT_RMC_N", "JTAG_CPLD_TRST_R_N", "", "",
-	"", "", "", "",
-
-	/* D0-D7 line 48-63 */
-	"PWRGD_PDB_EAMHSC0_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC1_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC2_CPLD_PG_R", "",
-	"PWRGD_PDB_EAMHSC3_CPLD_PG_R", "",
-	"AMC_BRD_PRSNT_CPLD_L", "", "", "",
-	"", "", "", "",
-
-	/* E0-E7 line 64-79 */
-	"AMC_PDB_EAMHSC0_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC1_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC2_CPLD_EN_R", "",
-	"AMC_PDB_EAMHSC3_CPLD_EN_R", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* F0-F7 line 80-95 */
-	"PWRGD_PVDDCR_CPU1_P0", "SGPIO_READY",
-	"PWRGD_PVDDCR_CPU0_P0", "",
-	"", "", "", "",
-	"", "", "", "",
-
-	/* G0-G7 line 96-111 */
-	"L_PRSNT_EDSFF0_N", "",
-	"L_PRSNT_EDSFF1_N", "",
-	"R_PRSNT_EDSFF2_N", "",
-	"R_PRSNT_EDSFF3_N", "",
-	"HPM_EDSFF_PG", "",
-	"PWRGD_CHEH_CPU0_FPGA", "",
-	"PWRGD_CHAD_CPU0_FPGA", "FM_BMC_READY_PLD",
-	"", "",
-
-	/* H0-H7 line 112-127 */
-	"PWRGD_P3V3", "",
-	"P12V_DDR_IP_PWRGD_R", "",
-	"P12V_DDR_AH_PWRGD_R", "",
-	"PWRGD_P12V_VRM1_CPLD_PG_R", "",
-	"PWRGD_P12V_VRM0_CPLD_PG_R", "",
-	"PWRGD_PDB_HSC4_CPLD_PG_R", "",
-	"PWRGD_PVDD18_S5_P0_PG", "",
-	"PWRGD_PVDD33_S5_P0_PG", "",
-
-	/* I0-I7 line 128-143 */
-	"EAM0_BRD_PRSNT_R_L", "",
-	"EAM1_BRD_PRSNT_R_L", "",
-	"EAM2_BRD_PRSNT_R_L", "",
-	"EAM3_BRD_PRSNT_R_L", "",
-	"EAM0_CPU_MOD_PWR_GD_R", "",
-	"EAM1_CPU_MOD_PWR_GD_R", "",
-	"PRSNT_EDSFF_BOOT_N", "",
-	"EAM3_CPU_MOD_PWR_GD_R", "",
-
-	/* J0-J7 line 144-159 */
-	"PRSNT_L_BIRDGE_R", "",
-	"PRSNT_R_BIRDGE_R", "",
-	"BRIDGE_L_MAIN_PG_R", "",
-	"BRIDGE_R_MAIN_PG_R", "",
-	"BRIDGE_L_STBY_PG_R", "",
-	"BRIDGE_R_STBY_PG_R", "",
-	"", "", "", "",
-
-	/* K0-K7 line 160-175 */
-	"ADC_I2C_ALERT_N", "",
-	"TEMP_I2C_ALERT_R_L", "",
-	"CPU0_VR_SMB_ALERT_CPLD_N", "",
-	"COVER_INTRUDER_R_N", "",
-	"HANDLE_INTRUDER_CPLD_N", "",
-	"IRQ_MCIO_CPLD_WAKE_R_N", "",
-	"APML_CPU0_ALERT_R_N", "",
-	"PDB_ALERT_R_N", "",
-
-	/* L0-L7 line 176-191 */
-	"L_EDSFF0_PG", "", "L_EDSFF1_PG", "",
-	"R_EDSFF2_PG", "", "R_EDSFF3_PG", "",
-	"CPU0_CORETYPE0", "", "CPU0_CORETYPE1", "",
-	"CPU0_CORETYPE2", "", "FM_BIOS_POST_CMPLT_R_N", "",
-
-	/* M0-M7 line 192-207 */
-	"EAM0_SMERR_CPLD_R_L", "",
-	"EAM1_SMERR_CPLD_R_L", "",
-	"EAM2_SMERR_CPLD_R_L", "",
-	"EAM3_SMERR_CPLD_R_L", "",
-	"CPU0_SMERR_N_R", "",
-	"CPU0_NV_SAVE_N_R", "",
-	"PDB_PWR_LOSS_CPLD_N", "",
-	"IRQ_BMC_SMI_ACTIVE_R_N", "",
-
-	/* N0-N7 line 208-223 */
-	"AMCROT_BMC_S5_RDY_R", "",
-	"AMC_RDY_R", "",
-	"AMC_STBY_PGOOD_R", "",
-	"CPU_AMC_SLP_S5_R_L", "",
-	"AMC_CPU_EAMPG_R", "",
-	"", "", "", "",
-
-	/* O0-O7 line 224-239 */
-	"HPM_PWR_FAIL", "Port80_b0",
-	"FM_DIMM_IP_FAIL", "Port80_b1",
-	"FM_DIMM_AH_FAIL", "Port80_b2",
-	"AMC_THERMTRIP_ASSERT", "Port80_b3",
-	"CPU_THERMTRIP_ASSERT", "Port80_b4",
-	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
-	"CPLD_SGPIO_RDY", "Port80_b6",
-	"", "Port80_b7",
-
-	/* P0-P7 line 240-255 */
-	"CPU0_SLP_S5_N_R", "NFC_VEN",
-	"CPU0_SLP_S3_N_R", "",
-	"FM_CPU0_PWRGD", "",
-	"PWRGD_RMC", "",
-	"FM_RST_CPU0_RESET_N", "",
-	"FM_PWRGD_CPU0_PWROK", "",
-	"wS5_PWR_Ready", "",
-	"wS0_ON_N", "PWRGD_P1V0_AUX";
-	status = "okay";
-};
-
-// BIOS Flash
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default>;
-	status = "okay";
-	reg = <0x1e631000 0xc4>, <0x50000000 0x8000000>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		label = "pnor";
-		spi-max-frequency = <12000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-		status = "okay";
-	};
-};
-
-// HOST BIOS Debug
-&uart1 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-// BMC Debug Console
-&uart5 {
-	status = "okay";
-};
-
-&uart_routing {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-	pinctrl-names = "default";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-&wdt1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-	aspeed,reset-type = "soc";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-	aspeed,ext-pulse-duration = <256>;
-	status = "okay";
-};
+#include "aspeed-bmc-facebook-anacapa-evt1.dts"

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
  2026-08-25 10:47   ` Colin Huang via B4 Relay
  (?)
@ 2026-08-25 10:58   ` sashiko-bot
  -1 siblings, 0 replies; 28+ messages in thread
From: sashiko-bot @ 2026-08-25 10:58 UTC (permalink / raw)
  To: Colin Huang; +Cc: conor+dt, devicetree, robh

Thank you for your contribution! Sashiko AI review found 3 potential issue(s) to consider:
- [Critical] Devicetree ABI breakage due to removal of generic compatible string
- [Medium] Incorrect removal of `p3v3_bmc_aux` fixed-regulator node
- [Low] Included devicetrees use `.dts` extension instead of `.dtsi`
--

--- Patch [2]: [PATCH v6 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it ---
commit 9a026f3bc21757ceb40a47713b367e173351589e
Author: Colin Huang <u8813345@gmail.com>

ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it

This commit introduces an EVT1 development-phase devicetree for the
Facebook Anacapa BMC. It updates the top-level wrapper DTS to include
the EVT1 hardware revision file, removes redundant pinctrl names, and
fixes a dt-check-style strict violation.

>       Remove p3v3_bmc_aux node to fix '[unused-lable]' warning.

[Severity: Medium]
Is it correct to remove the entire hardware node here?

If the intention is just to fix an unused label warning, usually only the
label itself (p3v3_bmc_aux:) is removed, preserving the regulator node to
accurately describe the EVT1 hardware.

While follow-up patches in the series (e.g., commit "ARM: dts: aspeed:
anacapa: Add SPI flash VCC supply") add the regulator back into the EVT2
devicetree, the EVT1 devicetree baseline remains permanently stripped of
this regulator node.

> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
> new file mode 100644
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt1.dts
> @@ -0,0 +1,1120 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/dts-v1/;
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +
> +/ {
> +	compatible = "facebook,anacapa-bmc-evt1", "aspeed,ast2600";

[Severity: Critical]
Does removing the generic "facebook,anacapa-bmc" string from the compatible
property break existing ABI?

Bootloaders, kernel quirks, or userspace utilities (like systemd or OpenBMC)
that rely on matching the generic string will fail to recognize the board
during an upgrade.

Even at the end of the patch series, the generic string is never restored.
Should the wrapper file override this to retain the generic string, or should
it be appended here?

[ ... ]

> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
> @@ -1,1079 +1,3 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later
>  
> -/dts-v1/;
> -#include "aspeed-g6.dtsi"

[ ... ]

> -/ {
> -	model = "Facebook Anacapa BMC";
> -	compatible = "facebook,anacapa-bmc", "aspeed,ast2600";

[ ... ]

> +#include "aspeed-bmc-facebook-anacapa-evt1.dts"

[Severity: Low]
Is it intended for this included file to use a .dts extension?

In kernel devicetree conventions, files intended to be included by other
files typically use the .dtsi (Device Tree Source Include) extension. Since
this evt1 file is strictly used as an include base and is not built as a
separate target in the Makefile, would it be better named with a .dtsi
extension?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260825-anacapa-devlop-phase-devicetree-v6-0-9059a2a279ce@gmail.com?part=2

^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

Add a development-phase devicetree for the Facebook Anacapa BMC EVT2
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 178 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 179 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
new file mode 100644
index 000000000000..075ac39f369f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt1.dts"
+
+/ {
+	compatible = "facebook,anacapa-bmc-evt2", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"", "JTAG_CPLD_TRST_R_N",
+	"", "",
+	"", "",
+	"", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"", "",
+	"", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 3ae84e25dcb8..8244d7a8a7da 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt1.dts"
+#include "aspeed-bmc-facebook-anacapa-evt2.dts"

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

From: Colin Huang <u8813345@gmail.com>

Add a development-phase devicetree for the Facebook Anacapa BMC EVT2
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 178 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 179 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
new file mode 100644
index 000000000000..075ac39f369f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt1.dts"
+
+/ {
+	compatible = "facebook,anacapa-bmc-evt2", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"", "JTAG_CPLD_TRST_R_N",
+	"", "",
+	"", "",
+	"", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"", "",
+	"", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 3ae84e25dcb8..8244d7a8a7da 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt1.dts"
+#include "aspeed-bmc-facebook-anacapa-evt2.dts"

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* Re: [PATCH v6 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
  2026-08-25 10:47   ` Colin Huang via B4 Relay
  (?)
@ 2026-08-25 10:59   ` sashiko-bot
  -1 siblings, 0 replies; 28+ messages in thread
From: sashiko-bot @ 2026-08-25 10:59 UTC (permalink / raw)
  To: Colin Huang; +Cc: robh, devicetree, conor+dt

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Redundant redefinition of inherited properties in the `evt2.dts` file.
--

--- Patch [3]: [PATCH v6 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1 ---
commit 6b89a922e36e90ce204fd77dd1e9b16cb96a0684
Author: Colin Huang <u8813345@gmail.com>

ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1

Add a development-phase devicetree for the Facebook Anacapa BMC EVT2
hardware revision and update the Anacapa wrapper DTS to reference it.

> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
> new file mode 100644
> index 0000000000000..075ac39f369f7
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
> @@ -0,0 +1,178 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +
> +/dts-v1/;
> +#include "aspeed-bmc-facebook-anacapa-evt1.dts"
> +
> +/ {
> +	compatible = "facebook,anacapa-bmc-evt2", "aspeed,ast2600";
> +	model = "Facebook Anacapa BMC";

[Severity: Low]
This isn't a bug, but since this file includes
aspeed-bmc-facebook-anacapa-evt1.dts, is redefining the model string here
redundant? It appears to be identical to the inherited value from evt1.dts.

> +};
> +
> +&sgpiom0 {
> +	bus-frequency = <2000000>;

[Severity: Low]
This isn't a bug, but does redefining bus-frequency create a minor
maintainability hazard? This property seems to exactly match the one
inherited from the evt1.dts file.

[ ... ]

> +	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
> +	"S0_ON", "";
> +
> +	ngpios = <128>;
> +
> +	status = "okay";

[Severity: Low]
This isn't a bug, but are ngpios and status also redundantly redefined? 
These exactly match the properties already inherited via Devicetree's node
merging from evt1.dts.

> +};

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260825-anacapa-devlop-phase-devicetree-v6-0-9059a2a279ce@gmail.com?part=3

^ permalink raw reply	[flat|nested] 28+ messages in thread

* [PATCH v6 04/12] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

Add a development-phase devicetree for the Facebook Anacapa BMC DVT
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 178 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 179 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
new file mode 100644
index 000000000000..975d603ca540
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt2.dts"
+
+/ {
+	compatible = "facebook,anacapa-bmc-dvt", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
+	"R_EAM1_NIC_CBL_PRSNT_L", "",
+	"L_EAM0_NIC_CBL_PRSNT_L", "",
+	"L_EAM1_NIC_CBL_PRSNT_L", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"P12V_PWR_CABLE_PRSNT_L_R", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"RBB_Cable_Present", "",
+	"LBB_Cable_Present", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 8244d7a8a7da..a9512ea771e3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt2.dts"
+#include "aspeed-bmc-facebook-anacapa-dvt.dts"

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 04/12] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

From: Colin Huang <u8813345@gmail.com>

Add a development-phase devicetree for the Facebook Anacapa BMC DVT
hardware revision and update the Anacapa wrapper DTS to reference
it.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 178 +++++++++++++++++++++
 .../dts/aspeed/aspeed-bmc-facebook-anacapa.dts     |   2 +-
 2 files changed, 179 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
new file mode 100644
index 000000000000..975d603ca540
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "aspeed-bmc-facebook-anacapa-evt2.dts"
+
+/ {
+	compatible = "facebook,anacapa-bmc-dvt", "aspeed,ast2600";
+	model = "Facebook Anacapa BMC";
+};
+
+&sgpiom0 {
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out */
+	/* A0-A7 line 0-15 */
+	"L_FNIC_FLT", "FM_CPU0_SYS_RESET_N",
+	"L_BNIC0_FLT", "CPU0_KBRST_N",
+	"L_BNIC1_FLT", "FM_CPU0_PROCHOT_trigger_N",
+	"L_BNIC2_FLT", "FM_CLR_CMOS_R_P0",
+	"L_BNIC3_FLT", "Force_I3C_SEL",
+	"L_RTM_SW_FLT", "SYSTEM_Force_Run_AC_Cycle",
+	"", "",
+	"", "",
+
+	/* B0-B7 line 16-31 */
+	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+
+	/* C0-C7 line 32-47 */
+	"RSVD_RMC_GPIO3", "RTM_MUX_L",
+	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
+	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
+	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
+	"R_EAM1_NIC_CBL_PRSNT_L", "",
+	"L_EAM0_NIC_CBL_PRSNT_L", "",
+	"L_EAM1_NIC_CBL_PRSNT_L", "",
+
+	/* D0-D7 line 48-63 */
+	"Channel0_leakage_present_EAM3", "",
+	"Channel1_leakage_present_EAM0", "",
+	"Channel2_leakage_present_Manifold1", "",
+	"Channel4_leakage_present_Manifold2", "",
+	"AMC_BRD_PRSNT_CPLD_L", "",
+	"Channel7_leakage_present_EAM2", "",
+	"", "",
+	"", "",
+
+	/* E0-E7 line 64-79 */
+	"L_PRSNT_B_FENIC_R2_N", "",
+	"L_PRSNT_B_BENIC0_R2_N", "",
+	"L_PRSNT_B_BENIC1_R2_N", "",
+	"L_PRSNT_B_BENIC2_R2_N", "",
+	"L_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* F0-F7 line 80-95 */
+	"R_PRSNT_B_FENIC_R2_N", "SGPIO_READY",
+	"R_PRSNT_B_BENIC0_R2_N", "",
+	"R_PRSNT_B_BENIC1_R2_N", "",
+	"R_PRSNT_B_BENIC2_R2_N", "",
+	"R_PRSNT_B_BENIC3_R2_N", "",
+	"", "",
+	"", "",
+	"", "",
+
+	/* G0-G7 line 96-111 */
+	"L_PRSNT_EDSFF0_N", "",
+	"L_PRSNT_EDSFF1_N", "",
+	"R_PRSNT_EDSFF2_N", "",
+	"R_PRSNT_EDSFF3_N", "",
+	"HPM_EDSFF_PG", "",
+	"", "",
+	"P12V_PWR_CABLE_PRSNT_L_R", "FM_BMC_READY_PLD",
+	"PRSNT_NFC_BOARD_R", "",
+
+	/* H0-H7 line 112-127 */
+	"R_FNIC_FLT", "",
+	"R_BNIC0_FLT", "",
+	"R_BNIC1_FLT", "",
+	"R_BNIC2_FLT", "",
+	"R_BNIC3_FLT", "",
+	"R_RTM_SW_FLT", "",
+	"RBB_Cable_Present", "",
+	"LBB_Cable_Present", "",
+
+	/* I0-I7 line 128-143 */
+	"EAM0_BRD_PRSNT_R_L", "",
+	"EAM1_BRD_PRSNT_R_L", "",
+	"EAM2_BRD_PRSNT_R_L", "",
+	"EAM3_BRD_PRSNT_R_L", "",
+	"FM_TPM_PRSNT_R_N", "",
+	"PDB_L_PRSNT_R_N", "",
+	"PRSNT_EDSFF_BOOT_N", "",
+	"PRSNT_CPU0_N", "",
+
+	/* J0-J7 line 144-159 */
+	"PRSNT_L_BRIDGE_R", "",
+	"PRSNT_R_BRIDGE_R", "",
+	"BRIDGE_L_MAIN_PG_R", "",
+	"BRIDGE_R_MAIN_PG_R", "",
+	"BRIDGE_L_STBY_PG_R", "",
+	"BRIDGE_R_STBY_PG_R", "",
+	"IRQ_NFC_BOARD_R", "",
+	"RSMRST_N", "",
+
+	/* K0-K7 line 160-175 */
+	"ADC_I2C_ALERT_N", "",
+	"TEMP_I2C_ALERT_R_L", "",
+	"CPU0_VR_SMB_ALERT_CPLD_N", "",
+	"COVER_INTRUDER_R_N", "",
+	"HANDLE_INTRUDER_CPLD_N", "",
+	"IRQ_MCIO_CPLD_WAKE_R_N", "",
+	"APML_CPU0_ALERT_R_N", "",
+	"PDB_ALERT_R_N", "",
+
+	/* L0-L7 line 176-191 */
+	"L_EDSFF0_PG", "",
+	"L_EDSFF1_PG", "",
+	"R_EDSFF2_PG", "",
+	"R_EDSFF3_PG", "",
+	"HPM_CPLD_HEART_BIT", "",
+	"RBB_CPLD_HEART_BIT", "",
+	"LBB_CPLD_HEART_BIT", "",
+	"FM_BIOS_POST_CMPLT_R_N", "",
+
+	/* M0-M7 line 192-207 */
+	"EAM0_SMERR_CPLD_R_L", "",
+	"EAM1_SMERR_CPLD_R_L", "",
+	"EAM2_SMERR_CPLD_R_L", "",
+	"EAM3_SMERR_CPLD_R_L", "",
+	"CPU0_SMERR_N_R", "",
+	"CPU0_NV_SAVE_N_R", "",
+	"PDB_PWR_LOSS_CPLD_N", "",
+	"IRQ_BMC_SMI_ACTIVE_R_N", "",
+
+	/* N0-N7 line 208-223 */
+	"AMCROT_BMC_S5_RDY_R", "",
+	"AMC_RDY_R", "",
+	"AMC_STBY_PGOOD_R", "",
+	"CPU_AMC_SLP_S5_R_L", "",
+	"AMC_CPU_EAMPG_R", "",
+	"DIMM_PMIC_PG_TIMEOUT", "",
+	"EAM_MOD_PWR_GD_TIMEOUT", "",
+	"CPLD_AMC_STBY_PWR_EN", "",
+
+	/* O0-O7 line 224-239 */
+	"HPM_PWR_FAIL", "Port80_b0",
+	"FM_DIMM_IP_FAIL", "Port80_b1",
+	"FM_DIMM_AH_FAIL", "Port80_b2",
+	"AMC_THERMTRIP_ASSERT", "Port80_b3",
+	"CPU_THERMTRIP_ASSERT", "Port80_b4",
+	"PVDDCR_SOC_P0_OCP_L", "Port80_b5",
+	"CPLD_SGPIO_RDY", "Port80_b6",
+	"FM_MAIN_PWREN_RMC_EN_ISO", "Port80_b7",
+
+	/* P0-P7 line 240-255 */
+	"CPU0_SLP_S5_N_R", "NFC_VEN",
+	"CPU0_SLP_S3_N_R", "",
+	"FM_CPU0_PWRGD", "",
+	"PWRGD_RMC", "",
+	"FM_RST_CPU0_RESET_N", "RBB_CPLD_RISCV_RST",
+	"FM_PWRGD_CPU0_PWROK", "LBB_CPLD_RISCV_RST",
+	"AMC_FAIL", "HPM_CPLD_RISCV_RST",
+	"S0_ON", "";
+
+	ngpios = <128>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 8244d7a8a7da..a9512ea771e3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -1,3 +1,3 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
-#include "aspeed-bmc-facebook-anacapa-evt2.dts"
+#include "aspeed-bmc-facebook-anacapa-dvt.dts"

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 05/12] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 075ac39f369f..d2b4855ff1ad 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,20 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// SCM
+&i2c9 {
+	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 05/12] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang

From: Colin Huang <u8813345@gmail.com>

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts   | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 075ac39f369f..d2b4855ff1ad 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,20 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// SCM
+&i2c9 {
+	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 06/12] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Carl Lee

From: Carl Lee <carl.lee@amd.com>

Add eeprom device node for NFC adaptor board FRU.

Signed-off-by: Carl Lee <carl.lee@amd.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index d2b4855ff1ad..22f79a2c2639 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -22,6 +22,19 @@ eeprom@51 {
 	};
 };
 
+// MB
+&i2c13 {
+	i2c-mux@70 {
+		i2c@7 {
+			// NFC adaptor board FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 06/12] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Carl Lee

From: Carl Lee <carl.lee@amd.com>

Add eeprom device node for NFC adaptor board FRU.

Signed-off-by: Carl Lee <carl.lee@amd.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index d2b4855ff1ad..22f79a2c2639 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -22,6 +22,19 @@ eeprom@51 {
 	};
 };
 
+// MB
+&i2c13 {
+	i2c-mux@70 {
+		i2c@7 {
+			// NFC adaptor board FRU
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 07/12] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Update the LPDB and RPDB fan GPIO line names to align with the platform
fan numbering scheme.

The LPDB fan GPIOs are named FAN0 through FAN4, while the RPDB fan GPIOs
are named FAN5 through FAN8. This keeps the GPIO line names consistent
with the fan inventory and platform-level fan numbering.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 22f79a2c2639..7c641a79f63e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,40 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+		};
+
+		i2c@1 {
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG","LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG","LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG","LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R","LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R","LPDB_FAN4_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+			};
+		};
+	};
+};
+
 // SCM
 &i2c9 {
 	// SCM FRU

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 07/12] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Update the LPDB and RPDB fan GPIO line names to align with the platform
fan numbering scheme.

The LPDB fan GPIOs are named FAN0 through FAN4, while the RPDB fan GPIOs
are named FAN5 through FAN8. This keeps the GPIO line names consistent
with the fan inventory and platform-level fan numbering.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 22f79a2c2639..7c641a79f63e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,40 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+		};
+
+		i2c@1 {
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG","LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG","LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG","LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R","LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R","LPDB_FAN4_PRSNT_N_R",
+					"","",
+					"","",
+					"","";
+			};
+		};
+	};
+};
+
 // SCM
 &i2c9 {
 	// SCM FRU

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 08/12] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Andy Chung

From: Andy Chung <Andy.Chung@amd.com>

Add the mctp-controller property to enable frontend NIC management
via PLDM over MCTP.
Also add EEPROM device for NIC FRU and reorder the I2C virtual bus
index accroding to the system silkscreen index.

Signed-off-by: Andy Chung <Andy.Chung@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 7c641a79f63e..7fe8d279202a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,25 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+&{/aliases} {
+	i2c36 = &i2c11mux0ch5;
+	i2c37 = &i2c11mux0ch6;
+	i2c38 = &i2c11mux0ch7;
+	i2c39 = &i2c11mux0ch0;
+	i2c40 = &i2c11mux0ch1;
+	i2c41 = &i2c11mux0ch2;
+	i2c42 = &i2c11mux0ch3;
+	i2c43 = &i2c11mux0ch4;
+	i2c44 = &i2c10mux0ch1;
+	i2c45 = &i2c10mux0ch2;
+	i2c46 = &i2c10mux0ch3;
+	i2c47 = &i2c10mux0ch4;
+	i2c48 = &i2c10mux0ch5;
+	i2c49 = &i2c10mux0ch6;
+	i2c50 = &i2c10mux0ch7;
+	i2c51 = &i2c10mux0ch0;
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux@72 {
@@ -56,6 +75,124 @@ eeprom@51 {
 	};
 };
 
+// R Bridge Board
+&i2c10 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c10mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c11mux0ch0: i2c@0 {
+			mctp-controller;
+			// FE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 // MB
 &i2c13 {
 	i2c-mux@70 {

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 08/12] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Andy Chung

From: Andy Chung <Andy.Chung@amd.com>

Add the mctp-controller property to enable frontend NIC management
via PLDM over MCTP.
Also add EEPROM device for NIC FRU and reorder the I2C virtual bus
index accroding to the system silkscreen index.

Signed-off-by: Andy Chung <Andy.Chung@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 137 +++++++++++++++++++++
 1 file changed, 137 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 7c641a79f63e..7fe8d279202a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -8,6 +8,25 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+&{/aliases} {
+	i2c36 = &i2c11mux0ch5;
+	i2c37 = &i2c11mux0ch6;
+	i2c38 = &i2c11mux0ch7;
+	i2c39 = &i2c11mux0ch0;
+	i2c40 = &i2c11mux0ch1;
+	i2c41 = &i2c11mux0ch2;
+	i2c42 = &i2c11mux0ch3;
+	i2c43 = &i2c11mux0ch4;
+	i2c44 = &i2c10mux0ch1;
+	i2c45 = &i2c10mux0ch2;
+	i2c46 = &i2c10mux0ch3;
+	i2c47 = &i2c10mux0ch4;
+	i2c48 = &i2c10mux0ch5;
+	i2c49 = &i2c10mux0ch6;
+	i2c50 = &i2c10mux0ch7;
+	i2c51 = &i2c10mux0ch0;
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux@72 {
@@ -56,6 +75,124 @@ eeprom@51 {
 	};
 };
 
+// R Bridge Board
+&i2c10 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c10mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c10mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+// L Bridge Board
+&i2c11 {
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		/delete-property/ i2c-mux-idle-disconnect;
+
+		i2c11mux0ch0: i2c@0 {
+			mctp-controller;
+			// FE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch1: i2c@1 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch2: i2c@2 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch3: i2c@3 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c11mux0ch4: i2c@4 {
+			mctp-controller;
+			// BE NIC FRU
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
 // MB
 &i2c13 {
 	i2c-mux@70 {

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 09/12] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Peter Shen

From: Peter Shen <peter.shen@amd.com>

Add shunt resistor configuration for LTC4287 hot-swap controllers on
Anacapa EVT2 platform.

The resistor values are required for accurate current and power
measurement by the driver. These settings reflect the actual BOM used
on EVT2, where different sense resistor values (150 uOhm and 250 uOhm)
are populated across rails.

Without this configuration, the reported readings would be incorrect.

Signed-off-by: Peter Shen <peter.shen@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 7fe8d279202a..c36519a601a9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -43,6 +43,30 @@ gpio@24 {
 					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
 					"", "";
 			};
+
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@44 {
+				compatible = "lltc,ltc4287";
+				reg = <0x44>;
+				shunt-resistor-micro-ohms = <250>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 
 		i2c@1 {
@@ -57,6 +81,24 @@ gpio@24 {
 					"","",
 					"","";
 			};
+
+			power-monitor@40 {
+				compatible = "lltc,ltc4287";
+				reg = <0x40>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@41 {
+				compatible = "lltc,ltc4287";
+				reg = <0x41>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 	};
 };

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 09/12] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Peter Shen

From: Peter Shen <peter.shen@amd.com>

Add shunt resistor configuration for LTC4287 hot-swap controllers on
Anacapa EVT2 platform.

The resistor values are required for accurate current and power
measurement by the driver. These settings reflect the actual BOM used
on EVT2, where different sense resistor values (150 uOhm and 250 uOhm)
are populated across rails.

Without this configuration, the reported readings would be incorrect.

Signed-off-by: Peter Shen <peter.shen@amd.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 42 ++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index 7fe8d279202a..c36519a601a9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -43,6 +43,30 @@ gpio@24 {
 					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
 					"", "";
 			};
+
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@44 {
+				compatible = "lltc,ltc4287";
+				reg = <0x44>;
+				shunt-resistor-micro-ohms = <250>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 
 		i2c@1 {
@@ -57,6 +81,24 @@ gpio@24 {
 					"","",
 					"","";
 			};
+
+			power-monitor@40 {
+				compatible = "lltc,ltc4287";
+				reg = <0x40>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@41 {
+				compatible = "lltc,ltc4287";
+				reg = <0x41>;
+				shunt-resistor-micro-ohms = <150>;
+			};
+
+			power-monitor@45 {
+				compatible = "lltc,ltc4287";
+				reg = <0x45>;
+				shunt-resistor-micro-ohms = <250>;
+			};
 		};
 	};
 };

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 10/12] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Add PCA9554 GPIO expanders for PDB fuse monitor signals on the
Anacapa DVT board.

The patch adds GPIO expander definitions for both the left and
right PDBs under the i2c8 multiplexer and updates the associated
gpio-line-names to reflect the final signal assignments.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
index 975d603ca540..923954cff7a2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -8,6 +8,98 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@22 {
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TMP432_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "RPDB_VERID_A0",
+					"RPDB_VERID_A1", "RPDB_VERID_A2",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"RPDB_SKU_ID0", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_P50V_FUSE2_TVS1", "RPDB_P50V_FUSE2_TVS2",
+					"RPDB_P50V_FUSE3_TVS1", "RPDB_P50V_FUSE3_TVS2",
+					"RPDB_P50V_FUSE4_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@1 {
+			gpio@22 {
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N", "LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N", "LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N", "LPDB_VERID_A0",
+					"LPDB_VERID_A1", "LPDB_VERID_A2",
+					"LPDB_ALERT_P50V_HSC0_R_N", "LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N", "LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R", "LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R", "BARKLIP_PRSNT_N_R3";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG", "LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG", "LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG", "LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R", "LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R", "LPDB_FAN4_PRSNT_N_R",
+					"LPDB_SKU_ID0", "",
+					"", "",
+					"", "LPDB_PG_P3V3_R";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FUSE0_TVS1", "LPDB_P50V_FUSE0_TVS2",
+					"LPDB_P50V_FUSE1_TVS1", "LPDB_P50V_FUSE1_TVS2",
+					"LPDB_P50V_FUSE5_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 10/12] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Add PCA9554 GPIO expanders for PDB fuse monitor signals on the
Anacapa DVT board.

The patch adds GPIO expander definitions for both the left and
right PDBs under the i2c8 multiplexer and updates the associated
gpio-line-names to reflect the final signal assignments.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
index 975d603ca540..923954cff7a2 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -8,6 +8,98 @@ / {
 	model = "Facebook Anacapa BMC";
 };
 
+// MB - PDB
+&i2c8 {
+	i2c-mux@72 {
+		i2c@0 {
+			gpio@22 {
+				gpio-line-names =
+					"RPDB_FAN_FULL_SPEED_R_N", "RPDB_I2C_TMP432_U8_ALERT_R_N",
+					"RPDB_I2C_TMP432_U29_ALERT_R_N", "RPDB_GLOBAL_WP",
+					"RPDB_FAN_CT_FAN_FAIL_R_N", "RPDB_VERID_A0",
+					"RPDB_VERID_A1", "RPDB_VERID_A2",
+					"RPDB_ALERT_P50V_HSC2_R_N", "RPDB_ALERT_P50V_HSC3_R_N",
+					"RPDB_ALERT_P50V_HSC4_R_N", "RPDB_ALERT_P50V_STBY_R_N",
+					"RPDB_P12V_MB_VRM_ALERT_R_N",
+					"RPDB_P12V_STBY_VRM_ALERT_R_N",
+					"RPDB_PGD_P3V3_STBY_PWRGD_R",
+					"RPDB_P12V_STBY_VRM_PWRGD_BUF_R";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"RPDB_EAM2_PRSNT_MOS_N_R", "RPDB_EAM3_PRSNT_MOS_N_R",
+					"RPDB_PWRGD_P50V_HSC4_SYS_R",
+					"RPDB_PWRGD_P50V_STBY_SYS_BUF_R",
+					"RPDB_P50V_FAN5_R2_PG", "RPDB_P50V_FAN6_R2_PG",
+					"RPDB_P50V_FAN7_R2_PG", "RPDB_P50V_FAN8_R2_PG",
+					"RPDB_SKU_ID0", "RPDB_FAN5_PRSNT_N_R",
+					"", "RPDB_FAN6_PRSNT_N_R",
+					"RPDB_FAN7_PRSNT_N_R", "RPDB_FAN8_PRSNT_N_R",
+					"", "";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"RPDB_P50V_FUSE2_TVS1", "RPDB_P50V_FUSE2_TVS2",
+					"RPDB_P50V_FUSE3_TVS1", "RPDB_P50V_FUSE3_TVS2",
+					"RPDB_P50V_FUSE4_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+
+		i2c@1 {
+			gpio@22 {
+				gpio-line-names =
+					"LPDB_FAN_FULL_SPEED_R_N", "LPDB_I2C_TEMP75_U8_ALERT_R_N",
+					"LPDB_I2C_TMP432_U29_ALERT_R_N", "LPDB_GLOBAL_WP",
+					"LPDB_FAN_CT_FAN_FAIL_R_N", "LPDB_VERID_A0",
+					"LPDB_VERID_A1", "LPDB_VERID_A2",
+					"LPDB_ALERT_P50V_HSC0_R_N", "LPDB_ALERT_P50V_HSC1_R_N",
+					"LPDB_ALERT_P50V_HSC5_R_N", "LPDB_I2C_P12V_SW_VRM_ALERT_R_N",
+					"LPDB_EAM0_PRSNT_MOS_N_R", "LPDB_EAM1_PRSNT_MOS_N_R",
+					"LPDB_PWRGD_P50V_HSC5_SYS_R", "BARKLIP_PRSNT_N_R3";
+			};
+
+			gpio@24 {
+				gpio-line-names =
+					"LPDB_P50V_FAN0_R2_PG", "LPDB_P50V_FAN1_R2_PG",
+					"LPDB_P50V_FAN2_R2_PG", "LPDB_P50V_FAN3_R2_PG",
+					"LPDB_P50V_FAN4_R2_PG", "LPDB_FAN0_PRSNT_N_R",
+					"LPDB_FAN1_PRSNT_N_R", "LPDB_FAN2_PRSNT_N_R",
+					"LPDB_FAN3_PRSNT_N_R", "LPDB_FAN4_PRSNT_N_R",
+					"LPDB_SKU_ID0", "",
+					"", "",
+					"", "LPDB_PG_P3V3_R";
+			};
+
+			gpio@38 {
+				compatible = "nxp,pca9554";
+				reg = <0x38>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				gpio-line-names =
+					"LPDB_P50V_FUSE0_TVS1", "LPDB_P50V_FUSE0_TVS2",
+					"LPDB_P50V_FUSE1_TVS1", "LPDB_P50V_FUSE1_TVS2",
+					"LPDB_P50V_FUSE5_TVS1", "",
+					"", "";
+
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <174 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
 &sgpiom0 {
 	bus-frequency = <2000000>;
 	gpio-line-names =

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 11/12] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Remove the board location suffixes from the leakage present GPIO line
names. The channel number is enough to identify each leakage present
signal.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 28 +++++++++++-----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
index 923954cff7a2..ce5aecc984c8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -115,32 +115,32 @@ &sgpiom0 {
 	"", "",
 
 	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
-	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
-	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
-	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+	"Channel0_leakage", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage", "CPLD_BUF_R_AGPIO331",
 
 	/* C0-C7 line 32-47 */
 	"RSVD_RMC_GPIO3", "RTM_MUX_L",
 	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
 	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
-	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"Channel6_leakage_present", "whdt_sel",
 	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
 	"R_EAM1_NIC_CBL_PRSNT_L", "",
 	"L_EAM0_NIC_CBL_PRSNT_L", "",
 	"L_EAM1_NIC_CBL_PRSNT_L", "",
 
 	/* D0-D7 line 48-63 */
-	"Channel0_leakage_present_EAM3", "",
-	"Channel1_leakage_present_EAM0", "",
-	"Channel2_leakage_present_Manifold1", "",
-	"Channel4_leakage_present_Manifold2", "",
+	"Channel0_leakage_present", "",
+	"Channel1_leakage_present", "",
+	"Channel2_leakage_present", "",
+	"Channel4_leakage_present", "",
 	"AMC_BRD_PRSNT_CPLD_L", "",
-	"Channel7_leakage_present_EAM2", "",
+	"Channel7_leakage_present", "",
 	"", "",
 	"", "",
 

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 11/12] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Remove the board location suffixes from the leakage present GPIO line
names. The channel number is enough to identify each leakage present
signal.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
---
 .../dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts | 28 +++++++++++-----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
index 923954cff7a2..ce5aecc984c8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-dvt.dts
@@ -115,32 +115,32 @@ &sgpiom0 {
 	"", "",
 
 	/* B0-B7 line 16-31 */
-	"Channel0_leakage_EAM3", "FM_CPU_FPGA_JTAG_MUX_SEL",
-	"Channel1_leakage_EAM0", "FM_SCM_JTAG_MUX_SEL",
-	"Channel2_leakage_Manifold1", "FM_BRIDGE_JTAG_MUX_SEL",
-	"Channel5_leakage_present_EAM1", "FM_CPU0_NMI_SYNC_FLOOD_N",
-	"Channel4_leakage_Manifold2", "BMC_AINIC0_WP_R2_L",
-	"Channel5_leakage_EAM1", "BMC_AINIC1_WP_R2_L",
-	"Channel6_leakage_CPU_DIMM", "CPLD_BUF_R_AGPIO330",
-	"Channel7_leakage_EAM2", "CPLD_BUF_R_AGPIO331",
+	"Channel0_leakage", "FM_CPU_FPGA_JTAG_MUX_SEL",
+	"Channel1_leakage", "FM_SCM_JTAG_MUX_SEL",
+	"Channel2_leakage", "FM_BRIDGE_JTAG_MUX_SEL",
+	"Channel5_leakage_present", "FM_CPU0_NMI_SYNC_FLOOD_N",
+	"Channel4_leakage", "BMC_AINIC0_WP_R2_L",
+	"Channel5_leakage", "BMC_AINIC1_WP_R2_L",
+	"Channel6_leakage", "CPLD_BUF_R_AGPIO330",
+	"Channel7_leakage", "CPLD_BUF_R_AGPIO331",
 
 	/* C0-C7 line 32-47 */
 	"RSVD_RMC_GPIO3", "RTM_MUX_L",
 	"LEAK_DETECT_RMC_N", "RTM_MUX_R",
 	"HDR_P0_NMI_BTN_BUF_R_N", "FPGA_JTAG_SCM_DBREQ_N",
-	"Channel6_leakage_present_CPU_DIMM", "whdt_sel",
+	"Channel6_leakage_present", "whdt_sel",
 	"R_EAM0_NIC_CBL_PRSNT_L", "JTAG_CPLD_TRST_R_N",
 	"R_EAM1_NIC_CBL_PRSNT_L", "",
 	"L_EAM0_NIC_CBL_PRSNT_L", "",
 	"L_EAM1_NIC_CBL_PRSNT_L", "",
 
 	/* D0-D7 line 48-63 */
-	"Channel0_leakage_present_EAM3", "",
-	"Channel1_leakage_present_EAM0", "",
-	"Channel2_leakage_present_Manifold1", "",
-	"Channel4_leakage_present_Manifold2", "",
+	"Channel0_leakage_present", "",
+	"Channel1_leakage_present", "",
+	"Channel2_leakage_present", "",
+	"Channel4_leakage_present", "",
 	"AMC_BRD_PRSNT_CPLD_L", "",
-	"Channel7_leakage_present_EAM2", "",
+	"Channel7_leakage_present", "",
 	"", "",
 	"", "",
 

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 12/12] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply
  2026-08-25 10:47 ` Colin Huang via B4 Relay
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  -1 siblings, 0 replies; 28+ messages in thread
From: Colin Huang @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Specify the 3.3 V auxiliary rail as the SPI flash VCC supply to
avoid using the dummy regulator during device initialization.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index c36519a601a9..ecb1c86f9e90 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -6,6 +6,14 @@
 / {
 	compatible = "facebook,anacapa-bmc-evt2", "aspeed,ast2600";
 	model = "Facebook Anacapa BMC";
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "p3v3_bmc_aux";
+	};
 };
 
 &{/aliases} {
@@ -27,6 +35,23 @@ / {
 	i2c51 = &i2c10mux0ch0;
 };
 
+&fmc {
+	flash@0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+
+	flash@1 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	flash@0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux@72 {

-- 
2.34.1


^ permalink raw reply related	[flat|nested] 28+ messages in thread

* [PATCH v6 12/12] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply
@ 2026-08-25 10:47   ` Colin Huang via B4 Relay
  0 siblings, 0 replies; 28+ messages in thread
From: Colin Huang via B4 Relay @ 2026-08-25 10:47 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	colin.huang2, Colin Huang, Rex Fu

From: Rex Fu <rex.fu.amd@gmail.com>

Specify the 3.3 V auxiliary rail as the SPI flash VCC supply to
avoid using the dummy regulator during device initialization.

Signed-off-by: Rex Fu <rex.fu.amd@gmail.com>
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../aspeed/aspeed-bmc-facebook-anacapa-evt2.dts    | 25 ++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
index c36519a601a9..ecb1c86f9e90 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts
@@ -6,6 +6,14 @@
 / {
 	compatible = "facebook,anacapa-bmc-evt2", "aspeed,ast2600";
 	model = "Facebook Anacapa BMC";
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "p3v3_bmc_aux";
+	};
 };
 
 &{/aliases} {
@@ -27,6 +35,23 @@ / {
 	i2c51 = &i2c10mux0ch0;
 };
 
+&fmc {
+	flash@0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+
+	flash@1 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	flash@0 {
+		vcc-supply = <&p3v3_bmc_aux>;
+	};
+};
+
 // MB - PDB
 &i2c8 {
 	i2c-mux@72 {

-- 
2.34.1




^ permalink raw reply related	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2026-08-25 10:59 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-25 10:47 [PATCH v6 00/12] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase Colin Huang
2026-08-25 10:47 ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 01/12] dt-bindings: arm: aspeed: Add Anacapa EVT1 EVT2 DVT board Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 02/12] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:58   ` sashiko-bot
2026-08-25 10:47 ` [PATCH v6 03/12] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1 Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:59   ` sashiko-bot
2026-08-25 10:47 ` [PATCH v6 04/12] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2 Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 05/12] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 06/12] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 07/12] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 08/12] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 09/12] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 10/12] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 11/12] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay
2026-08-25 10:47 ` [PATCH v6 12/12] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply Colin Huang
2026-08-25 10:47   ` Colin Huang via B4 Relay

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.