From: Magnus Lindholm <linmag7@gmail.com>
To: sparclinux@vger.kernel.org
Cc: davem@davemloft.net, andreas@gaisler.com,
linux-kernel@vger.kernel.org, sam@ravnborg.org,
Magnus Lindholm <linmag7@gmail.com>
Subject: [PATCH 4/5] sparc32: move early memory setup to setup_arch
Date: Thu, 27 Aug 2026 20:24:16 +0200 [thread overview]
Message-ID: <20260827182757.6856-5-linmag7@gmail.com> (raw)
In-Reply-To: <20260827182757.6856-1-linmag7@gmail.com>
Move the early memory configuration out of SRMMU paging setup and next to
the rest of setup_arch(). Derive the PFN limits from memblock, reserve the
kernel and initrd there, and retain mem= support with
memblock_enforce_memory_limit().
When PAGE_OFFSET maps a relocated kernel, remove memory below phys_base
from memblock because it cannot be reached through the linear map. This
replaces the equivalent trimming of sp_banks.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
---
arch/sparc/include/asm/pgtable_32.h | 3 +-
arch/sparc/kernel/setup_32.c | 118 +++++++++++++----------
arch/sparc/mm/init_32.c | 140 +---------------------------
arch/sparc/mm/srmmu.c | 4 -
4 files changed, 73 insertions(+), 192 deletions(-)
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index f89b1250661d..91a6032cf6a2 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -37,8 +37,7 @@ struct vm_area_struct;
struct page;
void load_mmu(void);
-unsigned long calc_highpages(void);
-unsigned long __init bootmem_init(unsigned long *pages_avail);
+void __init find_ramdisk(unsigned long end_of_phys_memory);
#define pte_ERROR(e) __builtin_trap()
#define pmd_ERROR(e) __builtin_trap()
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 795714959da6..e5f1c3ee36df 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -23,6 +23,7 @@
#include <linux/syscalls.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
+#include <linux/memblock.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -254,28 +255,77 @@ static __init void leon_patch(void)
struct tt_entry *sparc_ttable;
-/* Drop RAM below the kernel; the linear map runs upward from phys_base
- * and cannot reach it.
- */
-static void __init trim_sp_banks_below(unsigned long base)
+unsigned long phys_base;
+EXPORT_SYMBOL(phys_base);
+
+unsigned long pfn_base;
+EXPORT_SYMBOL(pfn_base);
+
+unsigned long highend_pfn;
+
+static unsigned long __init calc_max_low_pfn(void)
{
- int i, j = 0;
+ unsigned long limit = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
+ unsigned long last_pfn = 0;
+ phys_addr_t start, end;
+ u64 i;
- for (i = 0; sp_banks[i].num_bytes != 0; i++) {
- unsigned long start = sp_banks[i].base_addr;
- unsigned long end = start + sp_banks[i].num_bytes;
+ for_each_mem_range(i, &start, &end) {
+ unsigned long start_pfn = PFN_DOWN(start);
- if (end <= base)
- continue; /* wholly below - drop it */
- if (start < base)
- start = base; /* straddles - trim the front */
+ if (start_pfn >= limit) {
+ if (last_pfn < limit)
+ limit = last_pfn;
+ break;
+ }
- sp_banks[j].base_addr = start;
- sp_banks[j].num_bytes = end - start;
- j++;
+ last_pfn = PFN_DOWN(end);
}
- sp_banks[j].base_addr = 0;
- sp_banks[j].num_bytes = 0;
+
+ return limit;
+}
+
+static void __init setup_memory(void)
+{
+ unsigned long ram_base = memblock_start_of_DRAM();
+ unsigned long real_base = __get_phys(PAGE_OFFSET);
+ unsigned long size;
+
+ memblock_set_bottom_up(true);
+ memblock_allow_resize();
+
+ phys_base = ram_base;
+ if (real_base && real_base != phys_base) {
+ prom_printf("phys_base: RAM starts 0x%x but kernel is at 0x%x\n",
+ (unsigned int)phys_base, (unsigned int)real_base);
+ phys_base = real_base;
+ memblock_remove(0, phys_base);
+ prom_printf("phys_base: adopted 0x%x, RAM below it dropped\n",
+ (unsigned int)phys_base);
+ }
+
+ if (cmdline_memory_size)
+ memblock_enforce_memory_limit(cmdline_memory_size);
+
+ min_low_pfn = PFN_DOWN(memblock_start_of_DRAM());
+ pfn_base = phys_base >> PAGE_SHIFT;
+ max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+ last_valid_pfn = max_pfn;
+ max_low_pfn = max_pfn;
+ highend_pfn = max_pfn;
+
+ if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT))
+ max_low_pfn = calc_max_low_pfn();
+
+ find_ramdisk(memblock_end_of_DRAM());
+
+ /* Reserve the kernel text/data/bss. */
+ size = __pa(PAGE_ALIGN((unsigned long)&_end)) - phys_base;
+ memblock_reserve(phys_base, size);
+ memblock_add(phys_base, size);
+
+ /* Only allow low memory to be allocated by memblock. */
+ memblock_set_current_limit(PFN_PHYS(max_low_pfn));
}
/* Called from head_32.S - before we have setup anything
@@ -306,9 +356,6 @@ void __init sparc32_start_kernel(struct linux_romvec *rp)
void __init setup_arch(char **cmdline_p)
{
- int i;
- unsigned long highest_paddr;
-
sparc_ttable = &trapbase[0];
/* Initialize PROM console and command line. */
@@ -343,36 +390,7 @@ void __init setup_arch(char **cmdline_p)
idprom_init();
load_mmu();
-
- phys_base = 0xffffffffUL;
- highest_paddr = 0UL;
- for (i = 0; sp_banks[i].num_bytes != 0; i++) {
- unsigned long top;
-
- if (sp_banks[i].base_addr < phys_base)
- phys_base = sp_banks[i].base_addr;
- top = sp_banks[i].base_addr +
- sp_banks[i].num_bytes;
- if (highest_paddr < top)
- highest_paddr = top;
- }
-
- /* phys_base must describe what PAGE_OFFSET maps to, not where RAM starts. */
- {
- unsigned long real_base = __get_phys(PAGE_OFFSET);
-
- if (real_base && real_base != phys_base) {
- prom_printf("phys_base: RAM starts 0x%x but kernel is at 0x%x\n",
- (unsigned int)phys_base,
- (unsigned int)real_base);
- phys_base = real_base;
- trim_sp_banks_below(phys_base);
- prom_printf("phys_base: adopted 0x%x, RAM below it dropped\n",
- (unsigned int)phys_base);
- }
- }
-
- pfn_base = phys_base >> PAGE_SHIFT;
+ setup_memory();
if (!root_flags)
root_mountflags &= ~MS_RDONLY;
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 75050dfbc2ea..62c41d896421 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -39,66 +39,15 @@
static unsigned long *sparc_valid_addr_bitmap;
-unsigned long phys_base;
-EXPORT_SYMBOL(phys_base);
-
-unsigned long pfn_base;
-EXPORT_SYMBOL(pfn_base);
-
struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
/* Initial ramdisk setup */
extern unsigned int sparc_ramdisk_image;
extern unsigned int sparc_ramdisk_size;
-unsigned long highstart_pfn, highend_pfn;
-
unsigned long last_valid_pfn;
-unsigned long calc_highpages(void)
-{
- int i;
- int nr = 0;
-
- for (i = 0; sp_banks[i].num_bytes != 0; i++) {
- unsigned long start_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
- unsigned long end_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
-
- if (end_pfn <= max_low_pfn)
- continue;
-
- if (start_pfn < max_low_pfn)
- start_pfn = max_low_pfn;
-
- nr += end_pfn - start_pfn;
- }
-
- return nr;
-}
-
-static unsigned long calc_max_low_pfn(void)
-{
- int i;
- unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
- unsigned long curr_pfn, last_pfn;
-
- last_pfn = (sp_banks[0].base_addr + sp_banks[0].num_bytes) >> PAGE_SHIFT;
- for (i = 1; sp_banks[i].num_bytes != 0; i++) {
- curr_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
-
- if (curr_pfn >= tmp) {
- if (last_pfn < tmp)
- tmp = last_pfn;
- break;
- }
-
- last_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
- }
-
- return tmp;
-}
-
-static void __init find_ramdisk(unsigned long end_of_phys_memory)
+void __init find_ramdisk(unsigned long end_of_phys_memory)
{
#ifdef CONFIG_BLK_DEV_INITRD
unsigned long size;
@@ -128,83 +77,6 @@ static void __init find_ramdisk(unsigned long end_of_phys_memory)
#endif
}
-unsigned long __init bootmem_init(unsigned long *pages_avail)
-{
- unsigned long start_pfn, bytes_avail, size;
- unsigned long end_of_phys_memory = 0;
- unsigned long high_pages = 0;
- int i;
-
- memblock_set_bottom_up(true);
- memblock_allow_resize();
-
- bytes_avail = 0UL;
- for (i = 0; sp_banks[i].num_bytes != 0; i++) {
- end_of_phys_memory = sp_banks[i].base_addr +
- sp_banks[i].num_bytes;
- bytes_avail += sp_banks[i].num_bytes;
- if (cmdline_memory_size) {
- if (bytes_avail > cmdline_memory_size) {
- unsigned long slack = bytes_avail - cmdline_memory_size;
-
- bytes_avail -= slack;
- end_of_phys_memory -= slack;
-
- sp_banks[i].num_bytes -= slack;
- if (sp_banks[i].num_bytes == 0) {
- sp_banks[i].base_addr = 0xdeadbeef;
- } else {
- memblock_add(sp_banks[i].base_addr,
- sp_banks[i].num_bytes);
- sp_banks[i+1].num_bytes = 0;
- sp_banks[i+1].base_addr = 0xdeadbeef;
- }
- break;
- }
- }
- memblock_add(sp_banks[i].base_addr, sp_banks[i].num_bytes);
- }
-
- if (cmdline_memory_size)
- memblock_enforce_memory_limit(cmdline_memory_size);
-
- /* Start with page aligned address of last symbol in kernel
- * image.
- */
- start_pfn = (unsigned long)__pa(PAGE_ALIGN((unsigned long) &_end));
-
- /* Now shift down to get the real physical page frame number. */
- start_pfn >>= PAGE_SHIFT;
-
- max_pfn = end_of_phys_memory >> PAGE_SHIFT;
-
- max_low_pfn = max_pfn;
- highstart_pfn = highend_pfn = max_pfn;
-
- if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT)) {
- highstart_pfn = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
- max_low_pfn = calc_max_low_pfn();
- high_pages = calc_highpages();
- printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
- high_pages >> (20 - PAGE_SHIFT));
- }
-
- find_ramdisk(end_of_phys_memory);
-
- /* Reserve the kernel text/data/bss. */
- size = (start_pfn << PAGE_SHIFT) - phys_base;
- memblock_reserve(phys_base, size);
- memblock_add(phys_base, size);
-
- size = memblock_phys_mem_size() - memblock_reserved_size();
- *pages_avail = (size >> PAGE_SHIFT) - high_pages;
-
- /* Only allow low memory to be allocated via memblock allocation */
- memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
-
- return max_pfn;
-}
-
/*
* paging_init() sets up the page tables: We call the MMU specific
* init routine based upon the Sun model type on the Sparc.
@@ -220,14 +92,10 @@ void __init paging_init(void)
static void __init taint_real_pages(void)
{
- int i;
-
- for (i = 0; sp_banks[i].num_bytes; i++) {
- unsigned long start, end;
-
- start = sp_banks[i].base_addr;
- end = start + sp_banks[i].num_bytes;
+ phys_addr_t start, end;
+ u64 i;
+ for_each_mem_range(i, &start, &end) {
while (start < end) {
set_bit(start >> 20, sparc_valid_addr_bitmap);
start += PAGE_SIZE;
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 3029527a5a9f..272e430f8bd8 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -884,7 +884,6 @@ void __init srmmu_paging_init(void)
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
- unsigned long pages_avail;
init_mm.context = (unsigned long) NO_CONTEXT;
sparc_iomap.start = SUN4M_IOBASE_VADDR; /* 16MB of IOSPACE on all sun4m's. */
@@ -910,9 +909,6 @@ void __init srmmu_paging_init(void)
prom_halt();
}
- pages_avail = 0;
- last_valid_pfn = bootmem_init(&pages_avail);
-
srmmu_nocache_calcsize();
srmmu_nocache_init();
srmmu_inherit_prom_mappings(0xfe400000, (LINUX_OPPROM_ENDVM - PAGE_SIZE));
--
2.43.0
next prev parent reply other threads:[~2026-08-27 18:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 18:24 [PATCH 0/5] sparc32: replace sp_banks with memblock Magnus Lindholm
2026-08-27 18:24 ` [PATCH 1/5] sparc32: use memblock when mapping the kernel Magnus Lindholm
2026-08-27 18:24 ` [PATCH 2/5] sparc32: use memblock to find available system memory Magnus Lindholm
2026-08-27 18:24 ` [PATCH 3/5] sparc32: populate memblock from the PROM memory map Magnus Lindholm
2026-08-27 18:24 ` Magnus Lindholm [this message]
2026-08-29 6:26 ` [PATCH 4/5] sparc32: move early memory setup to setup_arch Sam Ravnborg
2026-08-29 8:21 ` Magnus Lindholm
2026-08-27 18:24 ` [PATCH 5/5] sparc32: drop sp_banks Magnus Lindholm
2026-08-29 6:29 ` [PATCH 0/5] sparc32: replace sp_banks with memblock Sam Ravnborg
2026-08-29 8:54 ` Magnus Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260827182757.6856-5-linmag7@gmail.com \
--to=linmag7@gmail.com \
--cc=andreas@gaisler.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.