From: Magnus Lindholm <linmag7@gmail.com>
To: sparclinux@vger.kernel.org
Cc: davem@davemloft.net, andreas@gaisler.com,
linux-kernel@vger.kernel.org, sam@ravnborg.org,
Magnus Lindholm <linmag7@gmail.com>
Subject: [PATCH 5/5] sparc32: drop sp_banks
Date: Thu, 27 Aug 2026 20:24:17 +0200 [thread overview]
Message-ID: <20260827182757.6856-6-linmag7@gmail.com> (raw)
In-Reply-To: <20260827182757.6856-1-linmag7@gmail.com>
All memory-map consumers now use memblock. Stop duplicating the PROM map
in sp_banks and remove the array, its type, and its fixed bank limit.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
---
arch/sparc/include/asm/page_32.h | 16 -----------
arch/sparc/mm/init_32.c | 2 --
arch/sparc/prom/memory.c | 48 ++++----------------------------
3 files changed, 6 insertions(+), 60 deletions(-)
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
index c1bccbedf567..5daa5fd8eaa5 100644
--- a/arch/sparc/include/asm/page_32.h
+++ b/arch/sparc/include/asm/page_32.h
@@ -26,22 +26,6 @@
sparc_flush_page_to_ram(page); \
} while (0)
-/* The following structure is used to hold the physical
- * memory configuration of the machine. This is filled in
- * prom_meminit() and is later used by mem_init() to set up
- * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of
- * these structs, this is arbitrary. The entry after the
- * last valid one has num_bytes==0.
- */
-struct sparc_phys_banks {
- unsigned long base_addr;
- unsigned long num_bytes;
-};
-
-#define SPARC_PHYS_BANKS 32
-
-extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
-
/* passing structs on the Sparc slow us down tremendously... */
/* #define STRICT_MM_TYPECHECKS */
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 62c41d896421..4fc77ccedcbd 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -39,8 +39,6 @@
static unsigned long *sparc_valid_addr_bitmap;
-struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
-
/* Initial ramdisk setup */
extern unsigned int sparc_ramdisk_image;
extern unsigned int sparc_ramdisk_size;
diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c
index 59962bc0bc82..3f65bde2bb89 100644
--- a/arch/sparc/prom/memory.c
+++ b/arch/sparc/prom/memory.c
@@ -8,30 +8,21 @@
#include <linux/kernel.h>
#include <linux/memblock.h>
-#include <linux/sort.h>
#include <linux/init.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/page.h>
-static int __init prom_meminit_v0(void)
+static void __init prom_meminit_v0(void)
{
struct linux_mlist_v0 *p;
- int index;
- index = 0;
- for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) {
- sp_banks[index].base_addr = (unsigned long) p->start_adr;
- sp_banks[index].num_bytes = p->num_bytes;
+ for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more)
memblock_add(p->start_adr, p->num_bytes & PAGE_MASK);
- index++;
- }
-
- return index;
}
-static int __init prom_meminit_v2(void)
+static void __init prom_meminit_v2(void)
{
struct linux_prom_registers reg[64];
phandle node;
@@ -41,51 +32,24 @@ static int __init prom_meminit_v2(void)
size = prom_getproperty(node, "available", (char *) reg, sizeof(reg));
num_ents = size / sizeof(struct linux_prom_registers);
- for (i = 0; i < num_ents; i++) {
- sp_banks[i].base_addr = reg[i].phys_addr;
- sp_banks[i].num_bytes = reg[i].reg_size;
+ for (i = 0; i < num_ents; i++)
memblock_add(reg[i].phys_addr, reg[i].reg_size & PAGE_MASK);
- }
-
- return num_ents;
-}
-
-static int sp_banks_cmp(const void *a, const void *b)
-{
- const struct sparc_phys_banks *x = a, *y = b;
-
- if (x->base_addr > y->base_addr)
- return 1;
- if (x->base_addr < y->base_addr)
- return -1;
- return 0;
}
/* Initialize the memory lists based upon the prom version. */
void __init prom_meminit(void)
{
- int i, num_ents = 0;
-
switch (prom_vers) {
case PROM_V0:
- num_ents = prom_meminit_v0();
+ prom_meminit_v0();
break;
case PROM_V2:
case PROM_V3:
- num_ents = prom_meminit_v2();
+ prom_meminit_v2();
break;
default:
break;
}
- sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks),
- sp_banks_cmp, NULL);
-
- /* Sentinel. */
- sp_banks[num_ents].base_addr = 0xdeadbeef;
- sp_banks[num_ents].num_bytes = 0;
-
- for (i = 0; i < num_ents; i++)
- sp_banks[i].num_bytes &= PAGE_MASK;
}
--
2.43.0
next prev parent reply other threads:[~2026-08-27 18:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-27 18:24 [PATCH 0/5] sparc32: replace sp_banks with memblock Magnus Lindholm
2026-08-27 18:24 ` [PATCH 1/5] sparc32: use memblock when mapping the kernel Magnus Lindholm
2026-08-27 18:24 ` [PATCH 2/5] sparc32: use memblock to find available system memory Magnus Lindholm
2026-08-27 18:24 ` [PATCH 3/5] sparc32: populate memblock from the PROM memory map Magnus Lindholm
2026-08-27 18:24 ` [PATCH 4/5] sparc32: move early memory setup to setup_arch Magnus Lindholm
2026-08-29 6:26 ` Sam Ravnborg
2026-08-29 8:21 ` Magnus Lindholm
2026-08-27 18:24 ` Magnus Lindholm [this message]
2026-08-29 6:29 ` [PATCH 0/5] sparc32: replace sp_banks with memblock Sam Ravnborg
2026-08-29 8:54 ` Magnus Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260827182757.6856-6-linmag7@gmail.com \
--to=linmag7@gmail.com \
--cc=andreas@gaisler.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=sparclinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.