All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Magnus Lindholm <linmag7@gmail.com>
Cc: sparclinux@vger.kernel.org, davem@davemloft.net,
	andreas@gaisler.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/5] sparc32: move early memory setup to setup_arch
Date: Sat, 29 Aug 2026 08:26:23 +0200	[thread overview]
Message-ID: <20260829062623.GA44338@ravnborg.org> (raw)
In-Reply-To: <20260827182757.6856-5-linmag7@gmail.com>

Hi Magnus

On Thu, Aug 27, 2026 at 08:24:16PM +0200, Magnus Lindholm wrote:
> Move the early memory configuration out of SRMMU paging setup and next to
> the rest of setup_arch(). Derive the PFN limits from memblock, reserve the
> kernel and initrd there, and retain mem= support with
> memblock_enforce_memory_limit().
> 
> When PAGE_OFFSET maps a relocated kernel, remove memory below phys_base
> from memblock because it cannot be reached through the linear map. This
> replaces the equivalent trimming of sp_banks.
> 
Rebasing the relocate kernel patch on top of this would prevent the same
code to be patched twice. But the end result would ofc be the same.

A few comments in the following.

	Sam

> Suggested-by: Sam Ravnborg <sam@ravnborg.org>
> Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
> ---
>  arch/sparc/include/asm/pgtable_32.h |   3 +-
>  arch/sparc/kernel/setup_32.c        | 118 +++++++++++++----------
>  arch/sparc/mm/init_32.c             | 140 +---------------------------
>  arch/sparc/mm/srmmu.c               |   4 -
>  4 files changed, 73 insertions(+), 192 deletions(-)
> 
> diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
> index f89b1250661d..91a6032cf6a2 100644
> --- a/arch/sparc/include/asm/pgtable_32.h
> +++ b/arch/sparc/include/asm/pgtable_32.h
> @@ -37,8 +37,7 @@ struct vm_area_struct;
>  struct page;
>  
>  void load_mmu(void);
> -unsigned long calc_highpages(void);
> -unsigned long __init bootmem_init(unsigned long *pages_avail);
> +void __init find_ramdisk(unsigned long end_of_phys_memory);
>  
>  #define pte_ERROR(e)   __builtin_trap()
>  #define pmd_ERROR(e)   __builtin_trap()
> diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
> index 795714959da6..e5f1c3ee36df 100644
> --- a/arch/sparc/kernel/setup_32.c
> +++ b/arch/sparc/kernel/setup_32.c
> @@ -23,6 +23,7 @@
>  #include <linux/syscalls.h>
>  #include <linux/kdev_t.h>
>  #include <linux/major.h>
> +#include <linux/memblock.h>
>  #include <linux/string.h>
>  #include <linux/init.h>
>  #include <linux/interrupt.h>
> @@ -254,28 +255,77 @@ static __init void leon_patch(void)
>  
>  struct tt_entry *sparc_ttable;
>  
> -/* Drop RAM below the kernel; the linear map runs upward from phys_base
> - * and cannot reach it.
> - */
> -static void __init trim_sp_banks_below(unsigned long base)
> +unsigned long phys_base;
> +EXPORT_SYMBOL(phys_base);
> +
> +unsigned long pfn_base;
> +EXPORT_SYMBOL(pfn_base);
> +
> +unsigned long highend_pfn;
> +
> +static unsigned long __init calc_max_low_pfn(void)
>  {
> -	int i, j = 0;
> +	unsigned long limit = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
> +	unsigned long last_pfn = 0;
> +	phys_addr_t start, end;
> +	u64 i;
>  
> -	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
> -		unsigned long start = sp_banks[i].base_addr;
> -		unsigned long end = start + sp_banks[i].num_bytes;
> +	for_each_mem_range(i, &start, &end) {
> +		unsigned long start_pfn = PFN_DOWN(start);
Here for_each_mem_pfn_range() could be used.

>  
> -		if (end <= base)
> -			continue;		/* wholly below - drop it */
> -		if (start < base)
> -			start = base;		/* straddles - trim the front */
> +		if (start_pfn >= limit) {
> +			if (last_pfn < limit)
> +				limit = last_pfn;
> +			break;
> +		}
>  
> -		sp_banks[j].base_addr = start;
> -		sp_banks[j].num_bytes = end - start;
> -		j++;
> +		last_pfn = PFN_DOWN(end);
>  	}
> -	sp_banks[j].base_addr = 0;
> -	sp_banks[j].num_bytes = 0;
> +
> +	return limit;
> +}
> +
> +static void __init setup_memory(void)
> +{
> +	unsigned long ram_base = memblock_start_of_DRAM();
> +	unsigned long real_base = __get_phys(PAGE_OFFSET);
> +	unsigned long size;
> +
> +	memblock_set_bottom_up(true);
> +	memblock_allow_resize();
> +
> +	phys_base = ram_base;
> +	if (real_base && real_base != phys_base) {
> +		prom_printf("phys_base: RAM starts 0x%x but kernel is at 0x%x\n",
> +			    (unsigned int)phys_base, (unsigned int)real_base);
> +		phys_base = real_base;
> +		memblock_remove(0, phys_base);
> +		prom_printf("phys_base: adopted 0x%x, RAM below it dropped\n",
> +			    (unsigned int)phys_base);
> +	}
> +
> +	if (cmdline_memory_size)
> +		memblock_enforce_memory_limit(cmdline_memory_size);
> +
> +	min_low_pfn = PFN_DOWN(memblock_start_of_DRAM());
> +	pfn_base = phys_base >> PAGE_SHIFT;
> +	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
> +	last_valid_pfn = max_pfn;
last_valid_pfn can be replaced with max_low_pfn in all places.
> +	max_low_pfn = max_pfn;
Likewise, replace all uses of max_pfn with max_low_pfn.

Code becomes easier to understand when the memblock defined variables
are used.

> +	highend_pfn = max_pfn;
> +
> +	if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT))
> +		max_low_pfn = calc_max_low_pfn();
> +
> +	find_ramdisk(memblock_end_of_DRAM());
> +
> +	/* Reserve the kernel text/data/bss. */
> +	size = __pa(PAGE_ALIGN((unsigned long)&_end)) - phys_base;
> +	memblock_reserve(phys_base, size);
> +	memblock_add(phys_base, size);
> +
> +	/* Only allow low memory to be allocated by memblock. */
> +	memblock_set_current_limit(PFN_PHYS(max_low_pfn));
>  }
>  
>  /* Called from head_32.S - before we have setup anything
> @@ -306,9 +356,6 @@ void __init sparc32_start_kernel(struct linux_romvec *rp)
>  
>  void __init setup_arch(char **cmdline_p)
>  {
> -	int i;
> -	unsigned long highest_paddr;
> -
>  	sparc_ttable = &trapbase[0];
>  
>  	/* Initialize PROM console and command line. */
> @@ -343,36 +390,7 @@ void __init setup_arch(char **cmdline_p)
>  
>  	idprom_init();
>  	load_mmu();
> -
> -	phys_base = 0xffffffffUL;
> -	highest_paddr = 0UL;
> -	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
> -		unsigned long top;
> -
> -		if (sp_banks[i].base_addr < phys_base)
> -			phys_base = sp_banks[i].base_addr;
> -		top = sp_banks[i].base_addr +
> -			sp_banks[i].num_bytes;
> -		if (highest_paddr < top)
> -			highest_paddr = top;
> -	}
> -
> -	/* phys_base must describe what PAGE_OFFSET maps to, not where RAM starts. */
> -	{
> -		unsigned long real_base = __get_phys(PAGE_OFFSET);
> -
> -		if (real_base && real_base != phys_base) {
> -			prom_printf("phys_base: RAM starts 0x%x but kernel is at 0x%x\n",
> -				    (unsigned int)phys_base,
> -				    (unsigned int)real_base);
> -			phys_base = real_base;
> -			trim_sp_banks_below(phys_base);
> -			prom_printf("phys_base: adopted 0x%x, RAM below it dropped\n",
> -				    (unsigned int)phys_base);
> -		}
> -	}
> -
> -	pfn_base = phys_base >> PAGE_SHIFT;
> +	setup_memory();
>  
>  	if (!root_flags)
>  		root_mountflags &= ~MS_RDONLY;
> diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
> index 75050dfbc2ea..62c41d896421 100644
> --- a/arch/sparc/mm/init_32.c
> +++ b/arch/sparc/mm/init_32.c
> @@ -39,66 +39,15 @@
>  
>  static unsigned long *sparc_valid_addr_bitmap;
>  
> -unsigned long phys_base;
> -EXPORT_SYMBOL(phys_base);
> -
> -unsigned long pfn_base;
> -EXPORT_SYMBOL(pfn_base);
> -
>  struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
>  
>  /* Initial ramdisk setup */
>  extern unsigned int sparc_ramdisk_image;
>  extern unsigned int sparc_ramdisk_size;
>  
> -unsigned long highstart_pfn, highend_pfn;
> -
>  unsigned long last_valid_pfn;
>  
> -unsigned long calc_highpages(void)
> -{
> -	int i;
> -	int nr = 0;
> -
> -	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
> -		unsigned long start_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
> -		unsigned long end_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
> -
> -		if (end_pfn <= max_low_pfn)
> -			continue;
> -
> -		if (start_pfn < max_low_pfn)
> -			start_pfn = max_low_pfn;
> -
> -		nr += end_pfn - start_pfn;
> -	}
> -
> -	return nr;
> -}
> -
> -static unsigned long calc_max_low_pfn(void)
> -{
> -	int i;
> -	unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
> -	unsigned long curr_pfn, last_pfn;
> -
> -	last_pfn = (sp_banks[0].base_addr + sp_banks[0].num_bytes) >> PAGE_SHIFT;
> -	for (i = 1; sp_banks[i].num_bytes != 0; i++) {
> -		curr_pfn = sp_banks[i].base_addr >> PAGE_SHIFT;
> -
> -		if (curr_pfn >= tmp) {
> -			if (last_pfn < tmp)
> -				tmp = last_pfn;
> -			break;
> -		}
> -
> -		last_pfn = (sp_banks[i].base_addr + sp_banks[i].num_bytes) >> PAGE_SHIFT;
> -	}
> -
> -	return tmp;
> -}
> -
> -static void __init find_ramdisk(unsigned long end_of_phys_memory)
> +void __init find_ramdisk(unsigned long end_of_phys_memory)
>  {
>  #ifdef CONFIG_BLK_DEV_INITRD
>  	unsigned long size;
> @@ -128,83 +77,6 @@ static void __init find_ramdisk(unsigned long end_of_phys_memory)
>  #endif
>  }
>  
> -unsigned long __init bootmem_init(unsigned long *pages_avail)
> -{
> -	unsigned long start_pfn, bytes_avail, size;
> -	unsigned long end_of_phys_memory = 0;
> -	unsigned long high_pages = 0;
> -	int i;
> -
> -	memblock_set_bottom_up(true);
> -	memblock_allow_resize();
> -
> -	bytes_avail = 0UL;
> -	for (i = 0; sp_banks[i].num_bytes != 0; i++) {
> -		end_of_phys_memory = sp_banks[i].base_addr +
> -			sp_banks[i].num_bytes;
> -		bytes_avail += sp_banks[i].num_bytes;
> -		if (cmdline_memory_size) {
> -			if (bytes_avail > cmdline_memory_size) {
> -				unsigned long slack = bytes_avail - cmdline_memory_size;
> -
> -				bytes_avail -= slack;
> -				end_of_phys_memory -= slack;
> -
> -				sp_banks[i].num_bytes -= slack;
> -				if (sp_banks[i].num_bytes == 0) {
> -					sp_banks[i].base_addr = 0xdeadbeef;
> -				} else {
> -					memblock_add(sp_banks[i].base_addr,
> -						     sp_banks[i].num_bytes);
> -					sp_banks[i+1].num_bytes = 0;
> -					sp_banks[i+1].base_addr = 0xdeadbeef;
> -				}
> -				break;
> -			}
> -		}
> -		memblock_add(sp_banks[i].base_addr, sp_banks[i].num_bytes);
> -	}
> -
> -	if (cmdline_memory_size)
> -		memblock_enforce_memory_limit(cmdline_memory_size);
> -
> -	/* Start with page aligned address of last symbol in kernel
> -	 * image.
> -	 */
> -	start_pfn  = (unsigned long)__pa(PAGE_ALIGN((unsigned long) &_end));
> -
> -	/* Now shift down to get the real physical page frame number. */
> -	start_pfn >>= PAGE_SHIFT;
> -
> -	max_pfn = end_of_phys_memory >> PAGE_SHIFT;
> -
> -	max_low_pfn = max_pfn;
> -	highstart_pfn = highend_pfn = max_pfn;
> -
> -	if (max_low_pfn > pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT)) {
> -		highstart_pfn = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
> -		max_low_pfn = calc_max_low_pfn();
> -		high_pages = calc_highpages();
> -		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
> -		    high_pages >> (20 - PAGE_SHIFT));
> -	}
> -
> -	find_ramdisk(end_of_phys_memory);
> -
> -	/* Reserve the kernel text/data/bss. */
> -	size = (start_pfn << PAGE_SHIFT) - phys_base;
> -	memblock_reserve(phys_base, size);
> -	memblock_add(phys_base, size);
> -
> -	size = memblock_phys_mem_size() - memblock_reserved_size();
> -	*pages_avail = (size >> PAGE_SHIFT) - high_pages;
> -
> -	/* Only allow low memory to be allocated via memblock allocation */
> -	memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
> -
> -	return max_pfn;
> -}
> -
>  /*
>   * paging_init() sets up the page tables: We call the MMU specific
>   * init routine based upon the Sun model type on the Sparc.
> @@ -220,14 +92,10 @@ void __init paging_init(void)
>  
>  static void __init taint_real_pages(void)
>  {
> -	int i;
> -
> -	for (i = 0; sp_banks[i].num_bytes; i++) {
> -		unsigned long start, end;
> -
> -		start = sp_banks[i].base_addr;
> -		end = start + sp_banks[i].num_bytes;
> +	phys_addr_t start, end;
> +	u64 i;
>  
> +	for_each_mem_range(i, &start, &end) {
>  		while (start < end) {
>  			set_bit(start >> 20, sparc_valid_addr_bitmap);
>  			start += PAGE_SIZE;
There are no users of sparc_valid_addr_bitmap, it would be better
to drop the whole function in a preparation patch.

> diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
> index 3029527a5a9f..272e430f8bd8 100644
> --- a/arch/sparc/mm/srmmu.c
> +++ b/arch/sparc/mm/srmmu.c
> @@ -884,7 +884,6 @@ void __init srmmu_paging_init(void)
>  	pud_t *pud;
>  	pmd_t *pmd;
>  	pte_t *pte;
> -	unsigned long pages_avail;
>  
>  	init_mm.context = (unsigned long) NO_CONTEXT;
>  	sparc_iomap.start = SUN4M_IOBASE_VADDR;	/* 16MB of IOSPACE on all sun4m's. */
> @@ -910,9 +909,6 @@ void __init srmmu_paging_init(void)
>  		prom_halt();
>  	}
>  
> -	pages_avail = 0;
> -	last_valid_pfn = bootmem_init(&pages_avail);
> -
>  	srmmu_nocache_calcsize();
>  	srmmu_nocache_init();
>  	srmmu_inherit_prom_mappings(0xfe400000, (LINUX_OPPROM_ENDVM - PAGE_SIZE));
> -- 
> 2.43.0

  reply	other threads:[~2026-08-29  6:26 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-27 18:24 [PATCH 0/5] sparc32: replace sp_banks with memblock Magnus Lindholm
2026-08-27 18:24 ` [PATCH 1/5] sparc32: use memblock when mapping the kernel Magnus Lindholm
2026-08-27 18:24 ` [PATCH 2/5] sparc32: use memblock to find available system memory Magnus Lindholm
2026-08-27 18:24 ` [PATCH 3/5] sparc32: populate memblock from the PROM memory map Magnus Lindholm
2026-08-27 18:24 ` [PATCH 4/5] sparc32: move early memory setup to setup_arch Magnus Lindholm
2026-08-29  6:26   ` Sam Ravnborg [this message]
2026-08-29  8:21     ` Magnus Lindholm
2026-08-27 18:24 ` [PATCH 5/5] sparc32: drop sp_banks Magnus Lindholm
2026-08-29  6:29 ` [PATCH 0/5] sparc32: replace sp_banks with memblock Sam Ravnborg
2026-08-29  8:54   ` Magnus Lindholm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260829062623.GA44338@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=andreas@gaisler.com \
    --cc=davem@davemloft.net \
    --cc=linmag7@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sparclinux@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.