From: sashiko-bot@kernel.org
To: "Michal Wilczynski" <m.wilczynski@samsung.com>
Cc: vkoul@kernel.org, dri-devel@lists.freedesktop.org,
mfd@lists.linux.dev, neil.armstrong@linaro.org, robh@kernel.org,
conor+dt@kernel.org, linux-clk@vger.kernel.org, lee@kernel.org,
olteanv@gmail.com, devicetree@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH v2 08/15] soc: starfive: Add jh7110-hdmi-subsystem driver
Date: Fri, 28 Aug 2026 13:59:44 +0000 [thread overview]
Message-ID: <20260828135944.F40B91F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260828-jh7110-clean-send-v2-8-331680c8b9d1@samsung.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Missing `select REGMAP_MMIO` in Kconfig, leading to potential build/link errors.
--
commit 391d2ca299019c57f8ca3f0d4ee7e80cac19c1eb
Author: Michal Wilczynski <m.wilczynski@samsung.com>
Subject: soc: starfive: Add jh7110-hdmi-subsystem driver
This commit adds a parent driver for the monolithic StarFive JH7110 HDMI IP
block. It maps the shared register space and creates separate logical child
devices for the HDMI PHY and controller to break a circular probing
dependency.
> diff --git a/drivers/soc/starfive/Kconfig b/drivers/soc/starfive/Kconfig
> new file mode 100644
> index 0000000000000..7592d87dea37a
> --- /dev/null
> +++ b/drivers/soc/starfive/Kconfig
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Starfive SoC drivers
> +#
> +
> +if ARCH_STARFIVE || COMPILE_TEST
> +menu "Starfive SoC drivers"
> +
> +config SOC_STARFIVE_JH7110_HDMI_SUBSYSTEM
> + tristate "StarFive JH7110 HDMI subsystem driver"
> + depends on OF
[Severity: Low]
Does this Kconfig entry need to select REGMAP_MMIO?
If the kernel is configured with SOC_STARFIVE_JH7110_HDMI_SUBSYSTEM=y (for
example, during a random COMPILE_TEST build) but without any other driver
that enables REGMAP_MMIO, the build will likely fail with a linker error.
[ ... ]
> diff --git a/drivers/soc/starfive/jh7110-hdmi-subsystem.c b/drivers/soc/starfive/jh7110-hdmi-subsystem.c
> new file mode 100644
> index 0000000000000..d893c1c29f98b
> --- /dev/null
> +++ b/drivers/soc/starfive/jh7110-hdmi-subsystem.c
[ ... ]
> + regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + regmap = devm_regmap_init_mmio(dev, regs,
> + &starfive_hdmi_regmap_config);
[Severity: Low]
Could the missing REGMAP_MMIO Kconfig selection cause an undefined
reference to __devm_regmap_init_mmio_clk() here during link time?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260828-jh7110-clean-send-v2-0-331680c8b9d1@samsung.com?part=8
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: sashiko-bot@kernel.org
To: "Michal Wilczynski" <m.wilczynski@samsung.com>
Cc: vkoul@kernel.org, dri-devel@lists.freedesktop.org,
mfd@lists.linux.dev, neil.armstrong@linaro.org, robh@kernel.org,
conor+dt@kernel.org, linux-clk@vger.kernel.org, lee@kernel.org,
olteanv@gmail.com, devicetree@vger.kernel.org,
linux-phy@lists.infradead.org
Subject: Re: [PATCH v2 08/15] soc: starfive: Add jh7110-hdmi-subsystem driver
Date: Fri, 28 Aug 2026 13:59:44 +0000 [thread overview]
Message-ID: <20260828135944.F40B91F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260828-jh7110-clean-send-v2-8-331680c8b9d1@samsung.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] Missing `select REGMAP_MMIO` in Kconfig, leading to potential build/link errors.
--
commit 391d2ca299019c57f8ca3f0d4ee7e80cac19c1eb
Author: Michal Wilczynski <m.wilczynski@samsung.com>
Subject: soc: starfive: Add jh7110-hdmi-subsystem driver
This commit adds a parent driver for the monolithic StarFive JH7110 HDMI IP
block. It maps the shared register space and creates separate logical child
devices for the HDMI PHY and controller to break a circular probing
dependency.
> diff --git a/drivers/soc/starfive/Kconfig b/drivers/soc/starfive/Kconfig
> new file mode 100644
> index 0000000000000..7592d87dea37a
> --- /dev/null
> +++ b/drivers/soc/starfive/Kconfig
> @@ -0,0 +1,27 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Starfive SoC drivers
> +#
> +
> +if ARCH_STARFIVE || COMPILE_TEST
> +menu "Starfive SoC drivers"
> +
> +config SOC_STARFIVE_JH7110_HDMI_SUBSYSTEM
> + tristate "StarFive JH7110 HDMI subsystem driver"
> + depends on OF
[Severity: Low]
Does this Kconfig entry need to select REGMAP_MMIO?
If the kernel is configured with SOC_STARFIVE_JH7110_HDMI_SUBSYSTEM=y (for
example, during a random COMPILE_TEST build) but without any other driver
that enables REGMAP_MMIO, the build will likely fail with a linker error.
[ ... ]
> diff --git a/drivers/soc/starfive/jh7110-hdmi-subsystem.c b/drivers/soc/starfive/jh7110-hdmi-subsystem.c
> new file mode 100644
> index 0000000000000..d893c1c29f98b
> --- /dev/null
> +++ b/drivers/soc/starfive/jh7110-hdmi-subsystem.c
[ ... ]
> + regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + regmap = devm_regmap_init_mmio(dev, regs,
> + &starfive_hdmi_regmap_config);
[Severity: Low]
Could the missing REGMAP_MMIO Kconfig selection cause an undefined
reference to __devm_regmap_init_mmio_clk() here during link time?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260828-jh7110-clean-send-v2-0-331680c8b9d1@samsung.com?part=8
next prev parent reply other threads:[~2026-08-28 13:59 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20260828134813eucas1p1bd003a66706ed251017185fc14f13cc9@eucas1p1.samsung.com>
2026-08-28 13:47 ` [PATCH v2 00/15] drm: starfive: jh7110: Enable display subsystem Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` [PATCH v2 01/15] dt-bindings: phy: Add starfive,jh7110-inno-hdmi-phy Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:54 ` sashiko-bot
2026-08-28 13:54 ` sashiko-bot
2026-08-28 16:43 ` Conor Dooley
2026-08-28 16:43 ` Conor Dooley
2026-08-28 16:43 ` Conor Dooley
2026-08-28 16:43 ` Conor Dooley
2026-08-28 13:47 ` [PATCH v2 02/15] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:54 ` sashiko-bot
2026-08-28 13:54 ` sashiko-bot
2026-08-28 14:04 ` Icenowy Zheng
2026-08-28 14:04 ` Icenowy Zheng
2026-08-28 14:04 ` Icenowy Zheng
2026-08-28 14:04 ` Icenowy Zheng
2026-08-28 16:47 ` Conor Dooley
2026-08-28 16:47 ` Conor Dooley
2026-08-28 16:47 ` Conor Dooley
2026-08-28 16:47 ` Conor Dooley
2026-08-28 13:47 ` [PATCH v2 03/15] dt-bindings: mfd: Add starfive,jh7110-hdmi-subsystem Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:54 ` sashiko-bot
2026-08-28 13:54 ` sashiko-bot
2026-08-28 16:50 ` Conor Dooley
2026-08-28 16:50 ` Conor Dooley
2026-08-28 16:50 ` Conor Dooley
2026-08-28 16:50 ` Conor Dooley
2026-08-28 13:47 ` [PATCH v2 04/15] drm/bridge: inno-hdmi: Split probe out of bind Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:01 ` sashiko-bot
2026-08-28 14:01 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 05/15] drm/bridge: inno-hdmi: Allow the register map to come from a parent Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:54 ` sashiko-bot
2026-08-28 13:54 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 06/15] drm/bridge: inno-hdmi: Add .disable platform operation Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:57 ` sashiko-bot
2026-08-28 13:57 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 07/15] drm/bridge: inno-hdmi: Add .mode_valid " Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:52 ` sashiko-bot
2026-08-28 13:52 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 08/15] soc: starfive: Add jh7110-hdmi-subsystem driver Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:59 ` sashiko-bot [this message]
2026-08-28 13:59 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 09/15] clk: starfive: jh7110-vout: Allow pixel clock rate propagation Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:01 ` sashiko-bot
2026-08-28 14:01 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 10/15] drm/bridge: starfive: Add JH7110 HDMI controller driver Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:59 ` sashiko-bot
2026-08-28 13:59 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 11/15] phy: Add common Innosilicon HDMI PHY helpers Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:00 ` sashiko-bot
2026-08-28 14:00 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 12/15] phy: rockchip: inno-hdmi: Use the common Innosilicon " Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:12 ` sashiko-bot
2026-08-28 14:12 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 13/15] phy: starfive: Add jh7110-inno-hdmi-phy driver Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:04 ` sashiko-bot
2026-08-28 14:04 ` sashiko-bot
2026-08-28 13:47 ` [PATCH v2 14/15] riscv: dts: starfive: jh7110: Update DT for display subsystem Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:06 ` sashiko-bot
2026-08-28 14:06 ` sashiko-bot
2026-08-28 14:06 ` Icenowy Zheng
2026-08-28 14:06 ` Icenowy Zheng
2026-08-28 14:06 ` Icenowy Zheng
2026-08-28 14:06 ` Icenowy Zheng
2026-08-28 13:47 ` [PATCH v2 15/15] MAINTAINERS: Add StarFive JH7110 display subsystem entry Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 13:47 ` Michal Wilczynski
2026-08-28 14:01 ` Icenowy Zheng
2026-08-28 14:01 ` Icenowy Zheng
2026-08-28 14:01 ` Icenowy Zheng
2026-08-28 14:01 ` Icenowy Zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260828135944.F40B91F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=m.wilczynski@samsung.com \
--cc=mfd@lists.linux.dev \
--cc=neil.armstrong@linaro.org \
--cc=olteanv@gmail.com \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.