From: Colin Huang via B4 Relay <devnull+u8813345.gmail.com@kernel.org>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Billy Tsai <billy_tsai@aspeedtech.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
colin.huang2@amd.com, Colin Huang <u8813345@gmail.com>,
Carl Lee <carl.lee@amd.com>, Rex Fu <rex.fu.amd@gmail.com>,
Andy Chung <Andy.Chung@amd.com>, Peter Shen <peter.shen@amd.com>
Subject: [PATCH v7 00/11] ARM: dts: aspeed: anacapa: restructure devicetree for development-phase
Date: Tue, 01 Sep 2026 20:15:15 +0800 [thread overview]
Message-ID: <20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com> (raw)
This series refactors the Anacapa BMC devicetree layout to better support
development-phase hardware revisions (EVT1/EVT2/DVT) while keeping a platform
entrypoint.
Signed-off-by: Colin Huang <u8813345@gmail.com>
---
Changes in v7:
- Fix [Critical] Devicetree ABI breakage due to removal of generic compatible string
keep to use compatible string "facebook,anacapa-bmc".
- Fix [Low] Redundant redefinition of inherited properties in the `evt2.dts` file.
- Fix [Low] Included devicetrees use `.dts` extension instead of `.dtsi`
aspeed-bmc-facebook-anacapa-evt1.dts -> aspeed-bmc-facebook-anacapa-evt1.dtsi
aspeed-bmc-facebook-anacapa-evt2.dts -> aspeed-bmc-facebook-anacapa-evt2.dtsi
aspeed-bmc-facebook-anacapa-dvt.dts -> aspeed-bmc-facebook-anacapa-dvt.dtsi
- Link to v6: https://lore.kernel.org/r/20260825-anacapa-devlop-phase-devicetree-v6-0-9059a2a279ce@gmail.com
Changes in v6:
- Fold the following fixes into this series:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Move p3v3_bmc_aux node from evt1.dts to evt2.dts for dt-check-style
- Fix the patch author information
- Link to v5: https://lore.kernel.org/r/20260813-anacapa-devlop-phase-devicetree-v5-0-c7058f63dc67@gmail.com
Changes in v5:
- Remove redundant vhub pinctrl-names
- Use default SPI2 memory mapping
- Fix dt-check-style strict violations
- Add Acked-by from Conor Dooley
- Sort compatible strings in alphabetical order
- More commit message for ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it.
- Update commit message to describe both LPDB and RPDB GPIO expanders
- Link to v4: https://lore.kernel.org/r/20260805-anacapa-devlop-phase-devicetree-v4-0-5d67e0efa6c5@gmail.com
Changes in v4:
- Capitalize the first word of the short description.
- Rework the Anacapa development-phase devicetree hierarchy.
- Ensure that anacapa-evt1 generates an identical devicetree to the existing aspeed-bmc-facebook-anacapa.dts.
- Add SPI flash VCC supply.
- Simplify leakage GPIO line names.
- Add LPDB fuse monitor GPIO expander.
- Link to v3: https://lore.kernel.org/r/20260602-anacapa-devlop-phase-devicetree-v3-0-7c93c5df8d9b@gmail.com
Changes in v3:
- Restructure the EVT2 devicetree to inherit from the EVT1 devicetree, making it incremental rather than standalone.
- Add the DVT devicetree, inheriting from the EVT2 devicetree.
- Enable MCTP and FRU support for the NIC.
- Align PDB fan GPIO numbering.
- Add an EEPROM device node for the NFC adaptor board.
- Add an additional EEPROM device node for the SCM.
- Add shunt resistor values for HSC monitors
- Link to v2: https://lore.kernel.org/r/20260409-anacapa-devlop-phase-devicetree-v2-0-68f328671653@gmail.com
Changes in v2:
- Fix dtbs_check fail.
Validated by following command:
make dt_binding_check DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa.dtb
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt1.dtb
make CHECK_DTBS=y DT_SCHEMA_FILES=arm/aspeed/aspeed.yaml aspeed/aspeed-bmc-facebook-anacapa-evt2.dtb
- Link to v1: https://lore.kernel.org/r/20260407-anacapa-devlop-phase-devicetree-v1-0-97b96367cac3@gmail.com
---
Andy Chung (1):
ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC
Carl Lee (1):
ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
Colin Huang (4):
ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it
ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1
ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2
ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM
Peter Shen (1):
ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors
Rex Fu (4):
ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering
ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander
ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names
ARM: dts: aspeed: anacapa: Add SPI flash VCC supply
.../aspeed/aspeed-bmc-facebook-anacapa-dvt.dtsi | 260 +++++
.../aspeed/aspeed-bmc-facebook-anacapa-evt1.dtsi | 1131 ++++++++++++++++++++
.../aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi | 408 +++++++
.../dts/aspeed/aspeed-bmc-facebook-anacapa.dts | 1078 +------------------
4 files changed, 1800 insertions(+), 1077 deletions(-)
---
base-commit: cd7d1ef7d74ed5f5a1790a40389bc38382924556
change-id: 20260407-anacapa-devlop-phase-devicetree-4101d3f312c0
Best regards,
--
Colin Huang <u8813345@gmail.com>
next reply other threads:[~2026-09-01 12:16 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 12:15 Colin Huang via B4 Relay [this message]
2026-09-01 12:15 ` [PATCH v7 01/11] ARM: dts: aspeed: anacapa: Add EVT1 devicetree and point wrapper to it Colin Huang via B4 Relay
2026-09-01 12:30 ` sashiko-bot
2026-09-02 8:06 ` Colin Huang
2026-09-01 12:15 ` [PATCH v7 02/11] ARM: dts: aspeed: anacapa: Add EVT2 devicetree inheriting EVT1 Colin Huang via B4 Relay
2026-09-01 12:28 ` sashiko-bot
2026-09-02 8:14 ` Colin Huang
2026-09-01 12:15 ` [PATCH v7 03/11] ARM: dts: aspeed: anacapa: Add DVT devicetree inheriting EVT2 Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 04/11] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 05/11] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 06/11] ARM: dts: aspeed: anacapa: Align PDB fan GPIO numbering Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 07/11] ARM: dts: aspeed: anacapa: Enable MCTP and FRU for NIC Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 08/11] ARM: dts: aspeed: anacapa: evt2: Add shunt resistor values for HSC monitors Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 09/11] ARM: dts: aspeed: anacapa: Add LPDB fuse monitor GPIO expander Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 10/11] ARM: dts: aspeed: anacapa: Simplify leakage GPIO line names Colin Huang via B4 Relay
2026-09-01 12:15 ` [PATCH v7 11/11] ARM: dts: aspeed: anacapa: Add SPI flash VCC supply Colin Huang via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901-anacapa-devlop-phase-devicetree-v7-0-0bd71d2e0105@gmail.com \
--to=devnull+u8813345.gmail.com@kernel.org \
--cc=Andy.Chung@amd.com \
--cc=andrew@codeconstruct.com.au \
--cc=billy_tsai@aspeedtech.com \
--cc=carl.lee@amd.com \
--cc=colin.huang2@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.shen@amd.com \
--cc=rex.fu.amd@gmail.com \
--cc=robh@kernel.org \
--cc=ryan_chen@aspeedtech.com \
--cc=u8813345@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.