[PATCH v7 04/11] ARM: dts: aspeed: anacapa: Add additional EEPROM node for SCM

[Colin Huang via B4 Relay <devnull+u8813345.gmail.com@kernel.org>]

From: Colin Huang <u8813345@gmail.com>

The SCM FRU EEPROM I2C address differs between SCM revisions:
- Rev B uses address 0x50
- Rev C/D/E/F and later use address 0x51

Add an additional AT24C128 EEPROM node at 0x51 on i2c9 so the same
device tree can support multiple SCM revisions.

Signed-off-by: Colin Huang <u8813345@gmail.com>
---
 .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
index be7f17ad5f8e..77126418a702 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dtsi
@@ -3,6 +3,20 @@
 /dts-v1/;
 #include "aspeed-bmc-facebook-anacapa-evt1.dtsi"
 
+// SCM
+&i2c9 {
+	// SCM FRU
+	// | DC-SCM Rev        | Slave address of eeprom  |
+	// |-------------------|--------------------------|
+	// | Rev B             | 0x50                     |
+	// | Rev C/D/E/F/above | 0x51                     |
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+};
+
 &sgpiom0 {
 	gpio-line-names =
 	/*in - out */

-- 
2.34.1