[PATCH 0/3] Xiaomi Poco F1 (ebbg display variant) fixes

[PATCH 0/3] Xiaomi Poco F1 (ebbg display variant) fixes

[David Heidelberg via B4 Relay]

Been broken in mainline for some time.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
Casey Connolly (1):
      drm/panel: ebbg-ft8719: Set prepare_prev_first

David Heidelberg (2):
      drm/panel: ebbg-ft8719: Fix the MODULE_LICENSE() string
      drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)
---
base-commit: 7079a12d7506b07fb53b54a664bfad5fa9b16d70
change-id: 20260122-ebbg-ft8719-fixups-bce548250b02

Best regards,
--  
David Heidelberg <david@ixit.cz>

[PATCH 0/3] Xiaomi Poco F1 (ebbg display variant) fixes

[David Heidelberg]

Been broken in mainline for some time.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
Casey Connolly (1):
      drm/panel: ebbg-ft8719: Set prepare_prev_first

David Heidelberg (2):
      drm/panel: ebbg-ft8719: Fix the MODULE_LICENSE() string
      drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)
---
base-commit: 7079a12d7506b07fb53b54a664bfad5fa9b16d70
change-id: 20260122-ebbg-ft8719-fixups-bce548250b02

Best regards,
--  
David Heidelberg <david@ixit.cz>

[PATCH 1/3] drm/panel: ebbg-ft8719: Set prepare_prev_first

[David Heidelberg via B4 Relay]

From: Casey Connolly <casey.connolly@linaro.org>

This corrects the host initialisation sequence so that we can send
DSI/DCS commands in prepare().

Cc: stable@vger.kernel.org
Fixes: b00de0e237da ("drm/panel: introduce ebbg,ft8719 panel")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index fb9f9f42be4f2..1ab09c50a6306 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -193,16 +193,18 @@ static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
 	ctx->dsi = dsi;
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
 			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
 
+	ctx->panel.prepare_prev_first = true;
+
 	ret = drm_panel_of_backlight(&ctx->panel);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to get backlight\n");
 
 	drm_panel_add(&ctx->panel);
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {

-- 
2.55.0

[PATCH 1/3] drm/panel: ebbg-ft8719: Set prepare_prev_first

[David Heidelberg]

From: Casey Connolly <casey.connolly@linaro.org>

This corrects the host initialisation sequence so that we can send
DSI/DCS commands in prepare().

Cc: stable@vger.kernel.org
Fixes: b00de0e237da ("drm/panel: introduce ebbg,ft8719 panel")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index fb9f9f42be4f2..1ab09c50a6306 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -193,16 +193,18 @@ static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
 	ctx->dsi = dsi;
 	mipi_dsi_set_drvdata(dsi, ctx);
 
 	dsi->lanes = 4;
 	dsi->format = MIPI_DSI_FMT_RGB888;
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
 			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
 
+	ctx->panel.prepare_prev_first = true;
+
 	ret = drm_panel_of_backlight(&ctx->panel);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to get backlight\n");
 
 	drm_panel_add(&ctx->panel);
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {

-- 
2.55.0

[PATCH 2/3] drm/panel: ebbg-ft8719: Fix the MODULE_LICENSE() string

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.

See commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index 1ab09c50a6306..14982263a94f1 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -241,9 +241,9 @@ static struct mipi_dsi_driver ebbg_ft8719_driver = {
 		.name = "panel-ebbg-ft8719",
 		.of_match_table = ebbg_ft8719_of_match,
 	},
 };
 module_mipi_dsi_driver(ebbg_ft8719_driver);
 
 MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
 MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

-- 
2.55.0

[PATCH 2/3] drm/panel: ebbg-ft8719: Fix the MODULE_LICENSE() string

[David Heidelberg]

Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.

See commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index 1ab09c50a6306..14982263a94f1 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -241,9 +241,9 @@ static struct mipi_dsi_driver ebbg_ft8719_driver = {
 		.name = "panel-ebbg-ft8719",
 		.of_match_table = ebbg_ft8719_of_match,
 	},
 };
 module_mipi_dsi_driver(ebbg_ft8719_driver);
 
 MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
 MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
-MODULE_LICENSE("GPL v2");
+MODULE_LICENSE("GPL");

-- 
2.55.0

[PATCH 3/3] drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Efficiently this already happens with prepare/unprepare calls.
Remove unnecessary login and just use enable/disable functions.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index 14982263a94f1..9965f46f1a316 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -49,40 +49,42 @@ static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 	usleep_range(4000, 5000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	usleep_range(1000, 2000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 	usleep_range(15000, 16000);
 }
 
-static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
+static int ebbg_ft8719_enable(struct drm_panel *panel)
 {
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 	struct mipi_dsi_device *dsi = ctx->dsi;
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
 
 	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
 
 	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x00ff);
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
 
 	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
 	mipi_dsi_msleep(&dsi_ctx, 90);
 	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
 
 	return dsi_ctx.accum_err;
 }
 
-static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
+static int ebbg_ft8719_disable(struct drm_panel *panel)
 {
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 	struct mipi_dsi_device *dsi = ctx->dsi;
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
 
-	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+	ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
 
 	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
 	mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
 	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
 	mipi_dsi_msleep(&dsi_ctx, 90);
 
 	return dsi_ctx.accum_err;
 }
@@ -93,30 +95,23 @@ static int ebbg_ft8719_prepare(struct drm_panel *panel)
 	int ret;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
 	if (ret < 0)
 		return ret;
 
 	ebbg_ft8719_reset(ctx);
 
-	ret = ebbg_ft8719_on(ctx);
-	if (ret < 0) {
-		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-		return ret;
-	}
-
 	return 0;
 }
 
 static int ebbg_ft8719_unprepare(struct drm_panel *panel)
 {
 	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 
-	ebbg_ft8719_off(ctx);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
 
 	return 0;
 }
 
 static const struct drm_display_mode ebbg_ft8719_mode = {
 	.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
@@ -148,16 +143,18 @@ static int ebbg_ft8719_get_modes(struct drm_panel *panel,
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
 
 	return 1;
 }
 
 static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
 	.prepare = ebbg_ft8719_prepare,
+	.enable = ebbg_ft8719_enable,
+	.disable = ebbg_ft8719_disable,
 	.unprepare = ebbg_ft8719_unprepare,
 	.get_modes = ebbg_ft8719_get_modes,
 };
 
 static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
 {
 	struct device *dev = &dsi->dev;
 	struct ebbg_ft8719 *ctx;

-- 
2.55.0

[PATCH 3/3] drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

[David Heidelberg]

Efficiently this already happens with prepare/unprepare calls.
Remove unnecessary login and just use enable/disable functions.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
index 14982263a94f1..9965f46f1a316 100644
--- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
@@ -49,40 +49,42 @@ static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 	usleep_range(4000, 5000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	usleep_range(1000, 2000);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
 	usleep_range(15000, 16000);
 }
 
-static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
+static int ebbg_ft8719_enable(struct drm_panel *panel)
 {
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 	struct mipi_dsi_device *dsi = ctx->dsi;
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
 
 	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
 
 	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x00ff);
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
 	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
 
 	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
 	mipi_dsi_msleep(&dsi_ctx, 90);
 	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
 
 	return dsi_ctx.accum_err;
 }
 
-static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
+static int ebbg_ft8719_disable(struct drm_panel *panel)
 {
+	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 	struct mipi_dsi_device *dsi = ctx->dsi;
 	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
 
-	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+	ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
 
 	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
 	mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
 	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
 	mipi_dsi_msleep(&dsi_ctx, 90);
 
 	return dsi_ctx.accum_err;
 }
@@ -93,30 +95,23 @@ static int ebbg_ft8719_prepare(struct drm_panel *panel)
 	int ret;
 
 	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
 	if (ret < 0)
 		return ret;
 
 	ebbg_ft8719_reset(ctx);
 
-	ret = ebbg_ft8719_on(ctx);
-	if (ret < 0) {
-		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
-		return ret;
-	}
-
 	return 0;
 }
 
 static int ebbg_ft8719_unprepare(struct drm_panel *panel)
 {
 	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
 
-	ebbg_ft8719_off(ctx);
 	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
 
 	return 0;
 }
 
 static const struct drm_display_mode ebbg_ft8719_mode = {
 	.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
@@ -148,16 +143,18 @@ static int ebbg_ft8719_get_modes(struct drm_panel *panel,
 	connector->display_info.height_mm = mode->height_mm;
 	drm_mode_probed_add(connector, mode);
 
 	return 1;
 }
 
 static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
 	.prepare = ebbg_ft8719_prepare,
+	.enable = ebbg_ft8719_enable,
+	.disable = ebbg_ft8719_disable,
 	.unprepare = ebbg_ft8719_unprepare,
 	.get_modes = ebbg_ft8719_get_modes,
 };
 
 static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
 {
 	struct device *dev = &dsi->dev;
 	struct ebbg_ft8719 *ctx;

-- 
2.55.0

Re: [PATCH 3/3] drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] Moving DCS initialization commands from `.prepare()` to `.enable()` causes them to be sent after the DSI video stream has started, breaking panel initialization on many hosts.
--

commit 894224e238d4b672a8a8f36dbdfc03846d1bec2e
Author: David Heidelberg <david@ixit.cz>

drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

This commit splits the panel initialization by removing the ebbg_ft8719_on()
and ebbg_ft8719_off() calls from the prepare and unprepare callbacks, and
mapping them directly to the enable and disable callbacks.

> diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> index 14982263a94f1..9965f46f1a316 100644
> --- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> @@ -54,8 +54,9 @@ static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
>  	usleep_range(15000, 16000);
>  }
>  
> -static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
> +static int ebbg_ft8719_enable(struct drm_panel *panel)
>  {
> +	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>  	struct mipi_dsi_device *dsi = ctx->dsi;
>  	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };

[Severity: High]
Does moving the DCS initialization commands into the panel's enable callback
cause them to be sent too late?

The DRM bridge framework calls the panel's enable callback only after calling
enable on the host controller, which typically starts the video stream.

If ebbg_ft8719_enable() now sends DCS commands like MIPI_DCS_EXIT_SLEEP_MODE
after the high-speed video stream has started, will they fail or be ignored by
the panel, breaking the display initialization?

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260906-ebbg-ft8719-fixups-v1-0-4e846510cad1@ixit.cz?part=3

Re: [PATCH 1/3] drm/panel: ebbg-ft8719: Set prepare_prev_first

[Marco Mattiolo]

Il 06/09/26 3:19 PM, David Heidelberg via B4 Relay ha scritto:
> From: Casey Connolly <casey.connolly@linaro.org>
> 
> This corrects the host initialisation sequence so that we can send
> DSI/DCS commands in prepare().
> 
> Cc: stable@vger.kernel.org
> Fixes: b00de0e237da ("drm/panel: introduce ebbg,ft8719 panel")
> Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---

Tested-by: Marco Mattiolo <marco.mattiolo@hotmail.it>

Marco

Re: [PATCH 1/3] drm/panel: ebbg-ft8719: Set prepare_prev_first

[Neil Armstrong]

On 9/6/26 15:19, David Heidelberg via B4 Relay wrote:
> From: Casey Connolly <casey.connolly@linaro.org>
> 
> This corrects the host initialisation sequence so that we can send
> DSI/DCS commands in prepare().
> 
> Cc: stable@vger.kernel.org
> Fixes: b00de0e237da ("drm/panel: introduce ebbg,ft8719 panel")
> Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>   drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> index fb9f9f42be4f2..1ab09c50a6306 100644
> --- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> @@ -193,16 +193,18 @@ static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
>   	ctx->dsi = dsi;
>   	mipi_dsi_set_drvdata(dsi, ctx);
>   
>   	dsi->lanes = 4;
>   	dsi->format = MIPI_DSI_FMT_RGB888;
>   	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>   			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
>   
> +	ctx->panel.prepare_prev_first = true;
> +
>   	ret = drm_panel_of_backlight(&ctx->panel);
>   	if (ret)
>   		return dev_err_probe(dev, ret, "Failed to get backlight\n");
>   
>   	drm_panel_add(&ctx->panel);
>   
>   	ret = mipi_dsi_attach(dsi);
>   	if (ret < 0) {
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil

Re: [PATCH 2/3] drm/panel: ebbg-ft8719: Fix the MODULE_LICENSE() string

[Neil Armstrong]

On 9/6/26 15:19, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
> value does not declare the module's exact license, but only lets the
> module loader test whether the module is Free Software or not.
> 
> See commit bf7fbeeae6db ("module: Cure the MODULE_LICENSE "GPL" vs.
> "GPL v2" bogosity") in the details of the issue. The fix is to use
> "GPL" for all modules under any variant of the GPL.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>   drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> index 1ab09c50a6306..14982263a94f1 100644
> --- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> @@ -241,9 +241,9 @@ static struct mipi_dsi_driver ebbg_ft8719_driver = {
>   		.name = "panel-ebbg-ft8719",
>   		.of_match_table = ebbg_ft8719_of_match,
>   	},
>   };
>   module_mipi_dsi_driver(ebbg_ft8719_driver);
>   
>   MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
>   MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
> -MODULE_LICENSE("GPL v2");
> +MODULE_LICENSE("GPL");
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil

Re: [PATCH 3/3] drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

[Neil Armstrong]

On 9/6/26 15:19, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Efficiently this already happens with prepare/unprepare calls.
> Remove unnecessary login and just use enable/disable functions.

I would replace with:

Move the MIPI commands into enable/disable callbacks since they
are called between prepare/unprepare callbacks.

Or similar.

> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>   drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 17 +++++++----------
>   1 file changed, 7 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> index 14982263a94f1..9965f46f1a316 100644
> --- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
> @@ -49,40 +49,42 @@ static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   	usleep_range(4000, 5000);
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   	usleep_range(1000, 2000);
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>   	usleep_range(15000, 16000);
>   }
>   
> -static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
> +static int ebbg_ft8719_enable(struct drm_panel *panel)
>   {
> +	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>   	struct mipi_dsi_device *dsi = ctx->dsi;
>   	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>   
>   	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>   
>   	mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x00ff);
>   	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
>   	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
>   
>   	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
>   	mipi_dsi_msleep(&dsi_ctx, 90);
>   	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
>   
>   	return dsi_ctx.accum_err;
>   }
>   
> -static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
> +static int ebbg_ft8719_disable(struct drm_panel *panel)
>   {
> +	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>   	struct mipi_dsi_device *dsi = ctx->dsi;
>   	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>   
> -	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
> +	ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>   
>   	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
>   	mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
>   	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
>   	mipi_dsi_msleep(&dsi_ctx, 90);
>   
>   	return dsi_ctx.accum_err;

Before the ebbg_ft8719_off() return error was ignored, perhaps you still want to ignore the disable return error.

Neil

>   }
> @@ -93,30 +95,23 @@ static int ebbg_ft8719_prepare(struct drm_panel *panel)
>   	int ret;
>   
>   	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>   	if (ret < 0)
>   		return ret;
>   
>   	ebbg_ft8719_reset(ctx);
>   
> -	ret = ebbg_ft8719_on(ctx);
> -	if (ret < 0) {
> -		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> -		return ret;
> -	}
> -
>   	return 0;
>   }
>   
>   static int ebbg_ft8719_unprepare(struct drm_panel *panel)
>   {
>   	struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>   
> -	ebbg_ft8719_off(ctx);
>   	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>   	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>   
>   	return 0;
>   }
>   
>   static const struct drm_display_mode ebbg_ft8719_mode = {
>   	.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
> @@ -148,16 +143,18 @@ static int ebbg_ft8719_get_modes(struct drm_panel *panel,
>   	connector->display_info.height_mm = mode->height_mm;
>   	drm_mode_probed_add(connector, mode);
>   
>   	return 1;
>   }
>   
>   static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
>   	.prepare = ebbg_ft8719_prepare,
> +	.enable = ebbg_ft8719_enable,
> +	.disable = ebbg_ft8719_disable,
>   	.unprepare = ebbg_ft8719_unprepare,
>   	.get_modes = ebbg_ft8719_get_modes,
>   };
>   
>   static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
>   {
>   	struct device *dev = &dsi->dev;
>   	struct ebbg_ft8719 *ctx;
> 

Re: [PATCH 3/3] drm/panel: ebbg-ft8719: Split initialization into enable/disable fn

[David Heidelberg]

On 08/09/2026 14:15, Neil Armstrong wrote:
> On 9/6/26 15:19, David Heidelberg via B4 Relay wrote:
>> From: David Heidelberg <david@ixit.cz>
>>
>> Efficiently this already happens with prepare/unprepare calls.
>> Remove unnecessary login and just use enable/disable functions.
> 
> I would replace with:
> 
> Move the MIPI commands into enable/disable callbacks since they
> are called between prepare/unprepare callbacks.
> 

I'll adjust.

> Or similar.
> 
>>
>> Signed-off-by: David Heidelberg <david@ixit.cz>
>> ---
>>   drivers/gpu/drm/panel/panel-ebbg-ft8719.c | 17 +++++++----------
>>   1 file changed, 7 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c b/drivers/gpu/drm/ 
>> panel/panel-ebbg-ft8719.c
>> index 14982263a94f1..9965f46f1a316 100644
>> --- a/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
>> +++ b/drivers/gpu/drm/panel/panel-ebbg-ft8719.c
>> @@ -49,40 +49,42 @@ static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
>>       gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>       usleep_range(4000, 5000);
>>       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>       usleep_range(1000, 2000);
>>       gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>>       usleep_range(15000, 16000);
>>   }
>> -static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
>> +static int ebbg_ft8719_enable(struct drm_panel *panel)
>>   {
>> +    struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>>       struct mipi_dsi_device *dsi = ctx->dsi;
>>       struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>>       dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>>       mipi_dsi_dcs_set_display_brightness_multi(&dsi_ctx, 0x00ff);
>>       mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY, 
>> 0x24);
>>       mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
>>       mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
>>       mipi_dsi_msleep(&dsi_ctx, 90);
>>       mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
>>       return dsi_ctx.accum_err;
>>   }
>> -static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
>> +static int ebbg_ft8719_disable(struct drm_panel *panel)
>>   {
>> +    struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>>       struct mipi_dsi_device *dsi = ctx->dsi;
>>       struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
>> -    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +    ctx->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>>       mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
>>       mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);
>>       mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
>>       mipi_dsi_msleep(&dsi_ctx, 90);
>>       return dsi_ctx.accum_err;
> 
> Before the ebbg_ft8719_off() return error was ignored, perhaps you still want to 
> ignore the disable return error.

Sure, make sense. Next revision will land in minutes!
Thanks
David

> 
> Neil
> 
>>   }
>> @@ -93,30 +95,23 @@ static int ebbg_ft8719_prepare(struct drm_panel *panel)
>>       int ret;
>>       ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>>       if (ret < 0)
>>           return ret;
>>       ebbg_ft8719_reset(ctx);
>> -    ret = ebbg_ft8719_on(ctx);
>> -    if (ret < 0) {
>> -        gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> -        return ret;
>> -    }
>> -
>>       return 0;
>>   }
>>   static int ebbg_ft8719_unprepare(struct drm_panel *panel)
>>   {
>>       struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
>> -    ebbg_ft8719_off(ctx);
>>       gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>>       regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>>       return 0;
>>   }
>>   static const struct drm_display_mode ebbg_ft8719_mode = {
>>       .clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
>> @@ -148,16 +143,18 @@ static int ebbg_ft8719_get_modes(struct drm_panel *panel,
>>       connector->display_info.height_mm = mode->height_mm;
>>       drm_mode_probed_add(connector, mode);
>>       return 1;
>>   }
>>   static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
>>       .prepare = ebbg_ft8719_prepare,
>> +    .enable = ebbg_ft8719_enable,
>> +    .disable = ebbg_ft8719_disable,
>>       .unprepare = ebbg_ft8719_unprepare,
>>       .get_modes = ebbg_ft8719_get_modes,
>>   };
>>   static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
>>   {
>>       struct device *dev = &dsi->dev;
>>       struct ebbg_ft8719 *ctx;
>>
>